Press Brake Installation | UmproTech U.S. Service
UmproTech Inc. – Press Brake Installation & Client Responsibility Agreement
2025 Edition
1. Purpose
This Agreement defines the terms, responsibilities, and technical requirements for the delivery, installation, and commissioning of UmproTech hydraulic press brake systems at the client's facility in the United States.
2. Scope of Work
UmproTech technicians will:
- Assemble, align, and level the press brake on the client's site.
- Connect electrical and hydraulic systems.
- Perform oil fill, pressure calibration, and crowning verification.
- Calibrate backgauge axes and Delem controller functions.
- Conduct operational testing and operator training.
3. Client Responsibilities
The Client must:
Prepare the installation area:
- Clear and level concrete floor (min. 8 in thick for 200T+ machines).
- Sufficient access for forklifts or cranes (rated ≥ machine weight).
- Provide rigging services to move and position the press brake.
Ensure correct electrical supply:
- Proper voltage and amperage available before arrival (see table below).
- Grounding and main disconnect within 10 ft of the machine.
- Certified electrician available for final connection.
Provide hydraulic oil and auxiliary materials:
- ISO VG46 hydraulic oil — quantity according to the machine manual.
- Clean rags, funnels, and oil containers prepared.
Provide compressed air:
- Clean, dry air at 100–115 psi (0.7–0.8 MPa).
Ensure personnel and safety readiness:
- At least one operator available for training.
- PPE available (gloves, goggles, steel-toe boots).
- No unauthorized access during installation.
4. Electrical & Power Requirements
| Model / Capacity | Voltage | Breaker | Amperage | Notes |
|---|---|---|---|---|
| HBM 90/2500 – 125T | 220 V / 3 Ph | 40 A | ~28 A | Standard connection |
| HBM 160/3200 – 160T | 220–380 V / 3 Ph | 63 A | ~45 A | Stable 3-phase required |
| HBM 200/4000 – 200T | 380–480 V / 3 Ph | 80 A | ~60 A | Industrial supply |
| HBM 250/6000 – 250T | 480 V / 3 Ph | 100 A | ~75 A | Heavy-duty line |
| HBM 400–600T | 480 V / 3 Ph | 125 A+ | — | Crane and 3–4 techs required |
5. Required Accessories (Available from UmproTech)
| Accessory | Description | Purpose | Typical Price |
|---|---|---|---|
| Step-Up Transformer | Converts 220 V → 480 V | Required for 200T+ machines | $1,200+ |
| Voltage Stabilizer | Prevents voltage drop/spike | Recommended | $280 |
| Frequency Converter | Converts 1 Ph → 3 Ph | For limited facilities | $950+ |
| Hydraulic Oil (ISO VG46) | Clean, anti-wear oil | For oil fill | $85 / 5 gal |
| Safety Light Curtain Kit | Optional safety upgrade | Per OSHA standards | $250 |
| Crowning Calibration Tool | Used during alignment | Precision verification | $300 |
6. Installation Timeline
| Step | Task | Typical Duration |
|---|---|---|
| 1 | Unloading and rigging | 3–6 hours |
| 2 | Machine alignment and leveling | 1 day |
| 3 | Electrical and hydraulic connections | 1 day |
| 4 | Pressure calibration and crowning test | 0.5 day |
| 5 | Controller setup (Delem / ESA) and training | 1 day |
| Total | — | 2–3 days average |
7. Non-Compliance & Standby Charges
If the site is not ready at the scheduled time:
- Standby rate: $120 / hour / technician (min. 2 hours).
- Rescheduling fee: $600 / day / technician + travel costs.
- Cancellations < 5 business days: 50% of labor + travel.
- Unsafe or inaccessible site → work suspended until corrected.
8. Warranty and Support
Standard installation includes 30 days of free remote technical support.
Note: Warranty is void if the machine is relocated, rewired, or operated before official commissioning.
9. Client Responsibilities & Liability
The Client acknowledges responsibility for:
- Site readiness, utilities, and rigging.
- Providing hydraulic oil and electrical connection.
- Covering costs for delays, standby, or re-visits caused by unpreparedness.
- Safety and compliance at the worksite.
Note: UmproTech technicians reserve the right to halt installation if unsafe or non-compliant conditions are found.
10. Signatures
| Role | Client Representative | UmproTech Engineer |
| Name | ||
| Signature | ||
| Date | ||
| Installation Address | ||
| Contact / Phone | ||
11. Client Responsibility Acknowledgment
By signing below, the Client confirms that all site preparations have been completed according to UmproTech's technical requirements and agrees to all terms, responsibilities, and charges stated in this Agreement.
| Client Signature | |
| Date | |
| Company |
Contact Information
UmproTech Inc.
901 E Orchard St Unit G, Mundelein, IL 60060
📞 (872) 268-5842 | 📧 am@umpro-tech.com | 🌐 www.umprotech.com