• UmproTech 3015 5×10 1500W CNC fiber laser cutting machine
1 1

2000 W Fiber Laser Cutting Machine 3015 (5′×10′) | UmproTech AVAILABLE

Fiber Laser System — USA Warranty & Support
$45,999.00 USD
$45,999.00 USD
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.

Bajas existencias: quedan 4

Terms of delivery
Ver todos los detalles

2000 W Fiber Laser Cutting Machine — 3015 (5 ft × 10 ft)

Robust 2.0 kW fiber laser built for US job shops, OEMs, and fabrication cells that cut full 5′×10′ sheets with repeatable accuracy, fast throughput, and easy integration with bending and welding.

Laser: 2000 W · Bed: 3000×1500 mm (5′×10′) · Controller: CNC nesting (CypCut/FSCUT)

Accuracy: ±0.03 mm/m · Repeat: ±0.02 mm · Rapids: up to 120 m/min · Gases: O2/N2/Air

Overview for US shops

  • Primary cutter: high-mix job shops, prototypes, and repeat part families.
  • Cutting cell: feeds press brakes, welding stations, and assembly lines.
  • Upgrade path: cleaner edges and tighter tolerances vs plasma/CO₂/manual cutting.

Full-sheet 5×10 coverage + 2.0 kW power + CNC nesting keep setup time and scrap under control across steel, stainless, and aluminum.

Key advantages

  • Full 5′×10′ bed: run standard sheets without trimming or repositioning.
  • Typical cut capacity (2.0 kW): MS 12–14 mm · SS 5–6 mm · Al 4–5 mm (gas/grade/edge dependent).
  • High-speed motion: dual rack & pinion X/Y + AC servos, up to 100–120 m/min and ~1.0–1.2 g for short cycle times.
  • Nesting workflow: parts library, auto/manual nesting, micro-tabs, common-line cutting, quick job recall.
  • Scalable throughput: single table standard; shuttle exchange table optional for faster load/unload and lights-out potential.

Quick technical summary

Laser 2000 W fiber
Work area 3000×1500 mm (5′×10′)
Accuracy / repeat ±0.03 mm/m / ±0.02 mm
Motion Up to 120 m/min rapids; ~1.0–1.2 g
Drive Dual rack & pinion X/Y; ballscrew Z; AC servos
Gases O2, N2, Air
Electrical 380V 3PH typical; 480V via transformer/regional build
Footprint ~16′×8′; 4–7 t (options/enclosure dependent)

Options

  • Shuttle exchange table for higher throughput.
  • Fume extraction / dust collection interfaces for EHS needs.
  • Assist gas packages (O2/N2/Air) matched to edge-quality targets.
  • Voltage planning for US sites (480V or 208–240V via transformer strategy).

Implementation & support

  • Pre-install: layout, power, rigging, sheet handling paths, extraction.
  • Application review: parts/materials to confirm capacity and cycle time.
  • Training: controller, nesting, daily checks, cut-quality best practices.

Next step: Send DXF/STEP/PDF + material/thickness + quantities to confirm the best 3015 configuration.