Application and capacity
Define material, geometry, thickness or capacity, production volume, quality, workflow, and future work.
UmproTech industrial machinery
EtalTec FL55 5x5 Fiber Laser | 1kW–8kW Price Guide
Review machines, applications, facility requirements, delivery, installation, training, warranty, service, parts, rental, and financing pathways.
Compact table family • Current catalog price review
EtalTec FL55 5×5 Fiber Laser: 1kW–8kW
5×5 is a floor-space and sheet-format decision. Power is a production decision. Choose the FL55 family only after confirming that the smaller table fits the real part mix—and that higher power will be used often enough to lower cost per accepted part.
The EtalTec FL55 catalog currently spans 1kW through 8kW open-table configurations. The exact source, head, controller, chiller, electrical input, included accessories, warranty and allocation must be identified on the written quotation for the selected product.
Request an FL55 Package QuoteCheck 240V FeasibilityCurrent FL55 catalog references
| FL55 listing | Best question to answer before selecting it | Catalog price |
|---|---|---|
| FL55-1000, 1kW | Will a compact entry system cover the actual gauge-material workload and required cycle time? | $19,900 |
| FL55-1500, 1.5kW | Does the added output improve the real nesting and production plan enough to justify the step up? | $22,900 |
| FL55-2000, 2kW | Is the shop buying a balanced compact production cell or simply choosing the next wattage? | $23,500 |
| FL55-3000, 3kW | Will recurring mixed-material work use the power, and can loading keep the compact table productive? | $34,900 |
| FL55-4000, 4kW | Does the part mix benefit from faster processing more than it would benefit from a larger table? | $46,900 |
| FL55-6000, 6kW | Can the shop feed, unload and support a high-output source without the 5×5 table becoming the bottleneck? | $64,900 |
| FL55-8000, 8kW | Is there verified throughput and margin data proving that 8kW on a compact table lowers cost per accepted part? | $82,900 |
Price is not allocation. These are current catalog references, not confirmation that a specific serial-numbered machine is unreserved, configured for the buyer’s voltage, or ready to ship. Availability and package scope must be confirmed in writing.
Do not choose the FL55 by wattage alone
1kW–2kW review path
Compact entry production candidate. Start with gauge material, part size, accepted edge, production hours and the cost of bringing outsourced work in-house. Lower optical power does not automatically prove single-phase compatibility.
3kW–4kW review path
Mixed-production candidate. Compare accepted parts per hour, pierce-heavy jobs, material range and whether the 5×5 sheet format creates extra setups or poor nesting.
6kW–8kW review path
High-output compact-cell candidate. Prove material flow, gas capacity, extraction, electrical infrastructure and utilization. High power that waits for loading is expensive idle capacity.
5×5 or 5×10?
Choose 5×5 when the smaller format is intentional
- Most parts nest efficiently on the smaller sheet.
- Floor space and access are genuine constraints.
- Operators can load the chosen sheet size safely and repeatedly.
- Remnants, raw inventory and downstream equipment are organized around the compact format.
Compare 5×10 before committing when
- Standard 5×10 sheet purchasing improves material economics.
- Long parts or larger nests are common.
- Frequent half-sheet preparation creates labor or scrap.
- Future production growth may outgrow the compact table before it outgrows the laser power.
Electrical truth: 220V or 240V is not a phase answer
No FL55 model should be described as compatible with a customer’s single-phase shop merely from its power rating or a voltage label. The written quote must return the assigned input voltage, phase, frequency, complete load schedule, protective-device recommendation and any transformer or converter architecture.
The chiller, extraction and compressor must be reviewed as separate documented loads. The buyer’s licensed electrician should compare those requirements with measured facility conditions before connection.
What an FL55 quote must identify
- Exact FL55 model and product configuration
- Laser source, cutting head and controller
- Chiller model and cooling scope
- Usable work area and machine footprint drawing
- Input voltage, phase, frequency and connected load
- Assist-gas strategy and regulator requirements
- Compressor, dryer, filtration and receiver scope
- Extraction or dust collection scope
- Freight, unloading and rigging requirements
- Startup, calibration and operator-training scope
- Consumables and recommended spare parts
- Warranty terms, exclusions and support process
- Confirmed allocation or production lead time
FL55 buyer questions
Is the FL55-1500 currently priced at $22,900?
That is the current catalog reference for the active listing. The final written quote controls configuration, freight, tax and all added project scope.
Is every FL55 shown as available inventory?
No. Shopify quantity signals do not confirm that a particular machine is unreserved, fully configured or ready for immediate shipment.
Can the FL55 run on single-phase power?
Only a configuration-specific electrical review can answer that. Do not infer phase compatibility from optical power or a 220V–240V description.
Does the higher-power FL55 always produce more profit?
No. Profit depends on accepted parts per hour, utilization, nesting, gas, electrical cost, handling, secondary work and the actual sales mix.
Does a 5×5 table use standard 5×10 sheets?
Not as a full-sheet work area. Confirm the actual usable dimensions and build the raw-material plan around the selected table format.
Are the source, head and controller fixed across every listing?
Do not assume so. Those components and any approved alternatives must be identified on the quote for the assigned machine.
Choose the compact cell from real parts—not a wattage ladder
Send DXF files, material grades, typical and maximum thickness, monthly volumes, preferred sheet format, shop voltage and phase, delivery ZIP code, gas plan and required startup scope. UmproTech can compare the FL55 options against a 5×10 alternative and return a written project quote.
Request the FL55 ReviewPrices, components, availability and specifications are subject to confirmation. The written quotation, assigned model documents and order terms control.
Planning pathway
Connect the requirement to the complete machine project
Machine and facility
Compare configuration, controller, options, utilities, extraction, footprint, access, unloading, and placement.
Ownership and support
Confirm price path, delivery, startup, training, warranty, service, parts, financing, rental, used, or trade-in options.
Next step