Budget range
Useful when you are still comparing machine size and power. Send material, normal thickness, maximum thickness and delivery ZIP.
Return: realistic machine family and starting project range.InformationRFQ-FIBER · UmproTech USA
Fast budget Application fit Purchase-ready
Fiber Laser Quote USA | Delivered Price, Setup & Application Review
Get a fiber laser quote that can actually be installed and run.
A machine-only number is not a project quote. UmproTech reviews the part, production target, shop utilities, material handling, freight and startup scope before recommending 1.5kW, 3kW, 6kW or 12kW.
Choose the level of quote you need
Machine recommendation
Send DXF files, expected monthly volume, sheet size, shift pattern and edge-quality requirements.
Return: recommended power, table, open/enclosed configuration and gas strategy.Delivered startup package
Add shop power, compressor or gas plan, unloading access, installation, training and financing needs.
Return: written package with assumptions, scope and exclusions.What to send — and what you should receive back
Send UmproTech
- Company, contact name, phone and delivery ZIP.
- Material grades and normal production thickness.
- Maximum thickness that matters commercially.
- DXF files or representative part drawings.
- Monthly volume, batch size and shifts per day.
- Preferred sheet size: 4×8, 5×10, 5×13 or other.
- Available voltage, phase and service capacity.
- Oxygen, nitrogen or compressed-air plan.
- Doorway, dock, forklift, crane or rigging details.
- Installation, training and financing requirements.
A useful quote should return
- Recommended laser power and table size.
- Open-table or enclosed machine recommendation.
- Machine starting price and assigned configuration.
- Required chiller, compressor, gas and extraction scope.
- Electrical assumptions and site-readiness gaps.
- Freight, unloading and placement responsibilities.
- Commissioning and operator-training scope.
- Estimated availability or build status.
- Warranty path, exclusions and written acceptance basis.
- Financing review path when requested.
Current catalog anchors
| Reference configuration | Catalog starting price | Use it for |
|---|---|---|
| 1.5kW 5×10 open table | $13,000 | Lower-entry sheet work and lighter production |
| 3kW 5×10 open table | $19,000 | General fabrication and mixed sheet work |
| 6kW 5×10 open table | $35,000 | Higher throughput and recurring mid-range plate |
| 3kW 5×10 enclosed | $54,900 | Contained production-cell workflow |
| 6kW 5×10 enclosed | $69,900 | Higher-output enclosed production |
| 12kW 5×10 enclosed | $99,900 | High-throughput applications after ROI review |
These are current catalog starting references, not delivered totals or a promise that a specific serial-numbered unit is unallocated. Final price and availability require written confirmation.
Do not ask only, “What is the price?”
The cheapest machine can become the most expensive project when power, compressor capacity, gas quality, extraction, rigging or startup is missing. The correct comparison is delivered project cost and cost per accepted part.
Not sure whether you need 3kW, 6kW or 12kW?
3kW
Start here for general sheet fabrication when capital efficiency matters and the normal workload does not justify the infrastructure and operating cost of higher power.
6kW
Move here when recurring jobs, accepted parts per hour and reduced cycle time justify the additional machine and support-equipment cost.
12kW
Use only after proving enough volume, material mix, gas economics, loading capacity and downstream throughput to keep the machine productive.
Copy and send this RFQ
Subject: Fiber Laser Quote Request | RFQ-FIBER Company / contact: Phone / email: Delivery ZIP: Material grades: Normal thickness: Maximum required thickness: Sheet size: Monthly parts or sheets: Shifts per day: Available voltage / phase / amps: Assist gas or compressed-air plan: Open or enclosed preference: DXF or drawing link: Forklift / crane / rigging available: Installation and training needed: Yes / No Financing review needed: Yes / No Target purchase date:
Before you submit
Questions serious buyers ask
Can UmproTech quote from only material and thickness?
Yes, for an early budget range. A purchase-ready recommendation needs representative parts, expected volume, site utilities and delivery details.
Does the machine price include freight, installation and training?
Not automatically. The written quote must identify each included item and the responsibilities assigned to the buyer, carrier, electrician, rigger and service technician.
Can you recommend laser power from a DXF?
A DXF materially improves the review, but power also depends on material grade, thickness mix, edge-quality requirements, volume, assist gas and downstream operations.
Does Shopify inventory confirm a machine is ready to ship?
No. A positive inventory signal does not prove that a specific configuration or serial-numbered unit is free. Written allocation confirmation controls.
Can compressed air replace nitrogen?
Sometimes, after confirming pressure, delivered flow, dryness, filtration and acceptable edge quality on the actual material. It is not a universal substitute.
Can financing reserve a machine?
Approval or application alone does not reserve equipment. Reservation, deposit, lender funding and allocation terms must be confirmed in writing.
Will a sample cut guarantee every future job?
No. It validates the agreed material, geometry and acceptance criteria under the tested conditions. Production results still depend on material consistency, maintenance, consumables and process control.
What controls the final configuration?
The final written quote, invoice, specification sheet and signed scope control the source, cutting head, controller, accessories, delivery, warranty and service obligations.