Machine configuration
Power, table size, open or enclosed design, exchange table, sheet-and-tube capability, laser source, cutting head, controller, chiller, and software.
UmproTech industrial machinery
Fiber Laser Cutting Machine Price | 1.5kW–12kW USA
Review machines, applications, facility requirements, delivery, installation, training, warranty, service, parts, rental, and financing pathways.
Fiber Laser Cutting Machine Price in the USA
Direct answer: current UmproTech 5×10 catalog examples start at $13,000 for 1.5kW, $16,000 for 2kW, $19,000 for 3kW, and $35,000 for 6kW open-table systems. Current enclosed 5×10 examples start at $54,900 for 3kW, $69,900 for 6kW, and $99,900 for 12kW. These are listed machine prices—not guaranteed delivered totals. Final cost depends on configuration, freight, unloading, electrical requirements, compressor or assist-gas setup, extraction, installation, training, taxes, and current availability.
$13,000Current listed starting price for a 1.5kW 5×10 open system
$19,000Current listed starting price for a 3kW 5×10 open system
$35,000Current listed starting price for a 6kW 5×10 open system
$99,900Current listed starting price for a 12kW 5×10 enclosed system
Current Fiber Laser Price Examples
The table below uses active UmproTech catalog listings. Prices and availability can change, and each machine must be confirmed by written quote before purchase.
| Configuration | Current listed starting price | Typical buyer direction | View machine |
|---|---|---|---|
| 1.5kW 5×10 open table | $13,000 | Entry-level sheet cutting, lighter material, prototype and lower-volume work. | View 1.5kW system |
| 2kW 5×10 open table | $16,000 | Small fabrication shops wanting more capacity than a 1.5kW entry system. | View 2kW system |
| 3kW 5×10 open table | $19,000 | Balanced entry-production option for common job-shop sheet metal work. | View 3kW system |
| 6kW 5×10 open table | $35,000 | Growing fabrication shops seeking higher throughput and more production headroom. | View 6kW system |
| 3kW 5×10 enclosed | $54,900 | Buyers prioritizing a controlled cutting area, enclosure, and production-oriented layout. | View enclosed 3kW |
| 6kW 5×10 enclosed | $69,900 | Production shops balancing speed, enclosure, broader capability, and workflow. | View enclosed 6kW |
| 12kW 5×10 enclosed | $99,900 | High-output production environments where throughput and future capacity justify the investment. | View enclosed 12kW |
Pricing shown is based on current active catalog listings and is subject to change. Machine configuration, components, inventory status, freight, taxes, accessories, warranty, and delivery timing must be confirmed in writing.
Machine Price vs. Real Delivered Project Cost
Delivered Project Cost = Machine + Required Support Equipment + Freight + Unloading or Rigging + Installation and Training + Electrical or Gas Preparation + Taxes
A machine advertised at $19,000 is not automatically a $19,000 turnkey project. Some buyers already have suitable power, compressed air, gas supply, extraction, and unloading equipment. Others need a transformer, compressor package, dryer, filtration, fume extraction, forklift or rigging service, electrical work, installation, and operator training.
Production infrastructure
Electrical service, transformer, phase conversion, compressor, dryer, filtration, oxygen, nitrogen, shop air, chiller placement, and fume extraction.
Delivery and startup
Freight by ZIP code, appointment delivery, forklift or crane, rigging, inside placement, installation, commissioning, operator training, and starter consumables.
Why Two 6kW Machines Can Have Very Different Prices
Laser wattage is only one part of the machine. A basic open-table 6kW system and an enclosed production 6kW system can serve different buyers even though both use a 6kW source.
- Open vs. enclosed design: enclosure, extraction strategy, safety workflow, floor space, and loading process affect cost.
- Single table vs. exchange table: an exchange table can reduce loading downtime but adds mechanical complexity and price.
- Sheet-only vs. sheet-and-tube: tube chucks, supports, loading length, and software add cost.
- Component package: source brand, cutting head, controller, servo system, chiller, electrical cabinet, and included accessories matter.
- Support scope: freight, installation, training, warranty handling, spare parts, and U.S. support can change the real value.
Price Direction by Laser Power
1.5kW–2kW
Lower entry price for lighter sheet work, prototypes, signs, panels, brackets, and shops bringing limited outsourced cutting in-house.
3kW
A common first serious production step for job shops. It can balance initial investment, general fabrication capability, and facility requirements.
6kW
A stronger production direction for shops that need more throughput, broader capability, and room to grow beyond entry-level cutting.
12kW
High-output equipment for buyers evaluating cycle time, thicker daily work, production utilization, gas strategy, extraction, and cost per part.
20kW and higher
Should be justified by real workload, shift utilization, material mix, support infrastructure, operating cost, and production economics.
Unsure which power?
Send material, common thickness, maximum thickness, weekly volume, edge-quality target, and available shop power for an application review.
Common Costs Buyers Forget
- Freight to the exact delivery ZIP code
- Commercial vs. residential or limited-access delivery
- Forklift, crane, rigging, or inside placement
- Electrical disconnect, breaker, wire, and licensed electrician
- Transformer or phase-conversion package when required
- Industrial air compressor, dryer, filters, and air receiver
- Oxygen, nitrogen, bulk gas, bottles, regulators, and lines
- Dust and fume extraction
- Installation, commissioning, and operator training
- Starter nozzles, lenses, ceramics, protective windows, and consumables
- CAD/CAM or nesting workflow and operator computer
- Applicable sales or use tax
- Preventive maintenance and replacement parts
- Insurance and financing documentation
How to Compare Fiber Laser Quotes Correctly
Do not compare only the largest number on the advertisement. Put every quote into the same written scope.
| Quote item | What must be confirmed | Why it matters |
|---|---|---|
| Machine | Table size, power, open/enclosed, exchange table, source, head, controller, chiller. | Different configurations may share the same wattage but not the same production value. |
| Capability | Material, daily thickness, maximum occasional thickness, gas, speed, and edge quality. | Maximum severance is not the same as reliable production cutting. |
| Utilities | Voltage, phase, amps, breaker, transformer, compressor, gas, extraction. | A machine cannot produce if the facility is not ready. |
| Logistics | Freight, delivery appointment, unloading, door clearance, forklift capacity, rigging. | Heavy equipment delivery must be planned before the truck arrives. |
| Startup | Installation, commissioning, test cuts, software setup, operator training. | Correct startup reduces delays, mistakes, and cut-quality problems. |
| After-sale support | Warranty terms, consumable exclusions, parts path, remote support, on-site service. | Low purchase price has little value if downtime cannot be resolved. |
Financing and Monthly Payment Planning
Financing may be available for qualified buyers. Approval, down payment, term, interest rate, documentation, and monthly payment depend on the lender and the applicant’s credit and business profile. The financing request should use the complete project amount—not only the machine price—when freight, compressor, installation, or other necessary items are being financed.
Review equipment financing options. Financing is subject to final approval and lender terms; no approval or payment amount is guaranteed.
What to Send for an Accurate Price
- Material types: carbon steel, stainless steel, aluminum, galvanized, brass, copper, or mixed work.
- Common daily thickness and maximum occasional thickness.
- Preferred table size: 5×5, 4×8, 5×10, 5×13, 6×12, or larger.
- Expected production hours, sheets per week, and growth plan.
- Available voltage, phase, breaker capacity, and existing electrical service.
- Assist-gas plan: compressed air, oxygen, nitrogen, or unsure.
- Existing compressor, dryer, extraction, forklift, crane, or rigging access.
- Delivery ZIP code and whether the site is commercial, residential, rural, or limited access.
- Installation, training, consumables, spare parts, and financing requirements.
For the fastest review, include part drawings, DXF files, photos, material list, and your target timeline.
Frequently Asked Price Questions
How much does a fiber laser cutting machine cost?
Current UmproTech 5×10 catalog examples range from $13,000 for a 1.5kW open-table listing to $99,900 for a 12kW enclosed listing. The final delivered project cost depends on configuration, freight, utilities, support equipment, installation, training, taxes, and availability.
What is the price of a 3kW fiber laser?
Current listed 5×10 examples include a 3kW open-table system starting at $19,000 and a 3kW enclosed system starting at $54,900. Confirm the exact machine scope and delivered total in writing.
What is the price of a 6kW fiber laser?
Current listed 5×10 examples include a 6kW open-table system starting at $35,000 and a 6kW enclosed system starting at $69,900. Configuration and included equipment can differ significantly.
Does the machine price include shipping?
Not automatically. Freight is normally reviewed using the machine dimensions, weight, warehouse, route, delivery ZIP code, access conditions, and unloading requirements.
Is installation included in the price?
Installation and operator training must be confirmed in the written quote. Some buyers request delivery only, while others need commissioning, test cutting, software setup, and on-site training.
Is the water chiller included?
Many fiber laser packages include a matched industrial chiller, but the exact brand, model, capacity, and inclusion must be confirmed for the assigned machine.
Do I need to buy an air compressor?
It depends on the assist-gas strategy and existing shop equipment. High-pressure air cutting requires a properly sized compressor, dryer, filtration, receiver, and clean air supply.
Do I need a transformer?
A transformer may be required when the machine’s input voltage does not match the facility. Final machine nameplate, shop voltage, phase, and electrical plan must be reviewed before installation.
Can a fiber laser run on 220V single-phase power?
Some lower-power systems can be configured for single-phase shops using the correct electrical package. Higher-power production systems commonly require three-phase service. The exact configuration must be confirmed before purchase.
Why is an enclosed fiber laser more expensive?
An enclosed machine can include a full cover, more controlled extraction, additional safety features, exchange-table options, and a more production-oriented loading workflow.
Should I buy 3kW or 6kW?
Choose based on daily material thickness, cutting hours, required speed, gas plan, available power, budget, and future workload—not wattage alone. See the 3kW vs. 6kW comparison.
How much down payment is required?
Down payment requirements depend on the lender, applicant, credit profile, business history, equipment, and total project amount. Financing is subject to approval.
Can I get the monthly payment before applying?
A preliminary estimate may be possible, but an accurate payment requires the financed amount, term, rate, fees, down payment, and lender approval.
Can I see the machine before buying?
Demo availability depends on current machine location and schedule. Buyers can request a warehouse visit, live video review, or cutting test when available.
What is the fastest way to receive a delivered quote?
Send material, maximum thickness, table size, power target, shop power, gas or compressor plan, delivery ZIP code, unloading method, installation needs, and financing interest in one request.
Get the Real Delivered Fiber Laser Price
Send your material, thickness, table size, production goal, shop power, delivery ZIP code, unloading method, compressor or gas plan, installation needs, and financing interest. UmproTech can build a written quote around the complete project instead of a machine-only number.
Planning pathway
Connect the requirement to the complete machine project
Application and capacity
Define material, geometry, thickness or capacity, production volume, quality, workflow, and future work.
Machine and facility
Compare configuration, controller, options, utilities, extraction, footprint, access, unloading, and placement.
Ownership and support
Confirm price path, delivery, startup, training, warranty, service, parts, financing, rental, used, or trade-in options.
Next step