{"product_id":"co-laser-to-fiber-conversion-feasibility-assessment","title":"CO₂ Laser-to-Fiber Conversion Feasibility Assessment","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eCO₂ Laser-to-Fiber Conversion Feasibility Assessment — independent retrofit and upgrade work carried out on the laser source of a fiber laser cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachine frame, gantry and motion-system condition\u003c\/li\u003e\n\u003cli\u003eCNC controller, servo and electrical architecture review\u003c\/li\u003e\n\u003cli\u003eFiber source, cutting head and chiller compatibility\u003c\/li\u003e\n\u003cli\u003eGas, extraction and safety-system requirements\u003c\/li\u003e\n\u003cli\u003ePreliminary retrofit scope, risks and budget guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines whose motion, frame and control are sound but whose source has degraded\u003c\/li\u003e\n\u003cli\u003eOwners quoted a full machine replacement because the source is at end of life\u003c\/li\u003e\n\u003cli\u003eShops moving to a higher power class where the rest of the machine can carry it\u003c\/li\u003e\n\u003cli\u003eBuyers of used fiber lasers with an unknown or unsupported source\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSource model, serial and hours\u003c\/th\u003e\n\u003ctd\u003eNameplate, run hours, alarm history and prior repairs\u003c\/td\u003e\n\u003ctd\u003eDecides whether a rebuild, a like-for-like swap or a power upgrade is realistic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDelivery fiber and connector type\u003c\/th\u003e\n\u003ctd\u003eQBH\/QD connector, fiber length and routing\u003c\/td\u003e\n\u003ctd\u003eA mismatched connector changes the head and the cost of the job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling capacity\u003c\/th\u003e\n\u003ctd\u003eChiller kW, flow, water quality and hose runs\u003c\/td\u003e\n\u003ctd\u003eA higher-power source will not run on the old chiller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical service\u003c\/th\u003e\n\u003ctd\u003eVoltage, phase, amperage and cabinet space at the machine\u003c\/td\u003e\n\u003ctd\u003ePower upgrades are the most frequently under-budgeted item\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl and software\u003c\/th\u003e\n\u003ctd\u003eCNC version, parameter backup and license status\u003c\/td\u003e\n\u003ctd\u003eThe control has to talk to the new source before anything cuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eA fiber laser cutting machine is specified per assembly rather than from one fixed part number. The options below are the shortlist this configuration is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser source\u003c\/th\u003e\n\u003ctd\u003eRaycus \/ MAX \/ JPT \/ IPG\u003c\/td\u003e\n\u003ctd\u003eIdentified from the nameplate before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChiller and cooling circuit\u003c\/th\u003e\n\u003ctd\u003eS\u0026amp;A (Teyu) \/ Hanli \/ Tongfei\u003c\/td\u003e\n\u003ctd\u003eMatched to the source\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and communication interfaces\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003eConfirmed on the machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eSend this set and the first-round questions are already answered:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eLaser source brand, model, serial number and nameplate photo\u003c\/li\u003e\n\u003cli\u003ePhotos of the control cabinet with the door open, and of the fiber connector at the head\u003c\/li\u003e\n\u003cli\u003eAlarm codes and a short description of what the machine does now\u003c\/li\u003e\n\u003cli\u003eChiller make, model and capacity\u003c\/li\u003e\n\u003cli\u003eIncoming voltage, phase and available amperage at the machine\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFiber damage inside the source, contaminated end caps or prior unauthorized repairs can make a rebuild uneconomic\u003c\/li\u003e\n\u003cli\u003eA higher-power source does not raise cut capacity on its own — head, nozzle, gas, cooling and motion all have to carry the increase\u003c\/li\u003e\n\u003cli\u003eDiscontinued source models may have no parts route at any price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eParts availability drives the schedule. The shutdown window is agreed separately and only after the components are confirmed in stock. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSend those details through the intake form and the written quotation follows against your application. \u003ca href=\"\/es\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482580111726,"sku":"UM-CO2-ASSESS-001","price":2100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/co2-to-fiber-conversion-feasibility-assessment-white-v1_8641cc17-84f9-4dc5-92c2-04534eb45968.png?v=1786025997","url":"https:\/\/umprotech.com\/es\/products\/co-laser-to-fiber-conversion-feasibility-assessment","provider":"UmproTech","version":"1.0","type":"link"}