{"title":"Production Laser Cutting Systems USA","description":"\u003cp\u003eProduction laser cutting systems for U.S. fabrication shops and industrial buyers comparing mid-range production cutting capacity, RFQ options, financing, installation planning, and operator training.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/es\/pages\/fiber-laser-cutting-machines-usa-industrial\"\u003eMachine Buyer Page\u003c\/a\u003e | \u003ca href=\"\/es\/pages\/request-industrial-equipment-quote\"\u003eRequest Equipment Quote\u003c\/a\u003e | \u003ca href=\"https:\/\/ceilingfinancial.fillout.com\/umprotech\"\u003eFinancing Application\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"6000-w-laser-cutting-machine-3015-5-ft-10-ft","title":"UmproTech 3015 6kW 5x10 Fiber Laser Machine USA","description":"\u003ch2\u003eUmproTech 6kW 5x10 Fiber Laser Cutter for Heavy Sheet Metal Production\u003c\/h2\u003e\n\u003cp\u003eThe UmproTech 6kW 5x10 fiber laser cutter is positioned for U.S. fabrication shops that need higher production capacity, stronger cutting performance, and a quote process built around real material thickness, table size, shop utilities, delivery, startup, and operator training requirements.\u003c\/p\u003e\n\u003cp\u003eThis page is designed for job shops, contract fabricators, enclosure manufacturers, HVAC and sheet metal producers, maintenance departments, and industrial buyers comparing 6kW laser cutting capacity against lower-power systems.\u003c\/p\u003e\n\u003ch3\u003eBest Fit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProduction-focused sheet metal cutting on a 5x10 table\u003c\/li\u003e\n\u003cli\u003eBuyers comparing 3kW, 6kW, and higher-power fiber laser options\u003c\/li\u003e\n\u003cli\u003eFabrication teams that need higher throughput and stronger material range\u003c\/li\u003e\n\u003cli\u003eRFQ-driven purchasing where freight, installation, startup, and training must be reviewed before invoice\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBuyer Checklist\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrimary material types and maximum required thickness\u003c\/li\u003e\n\u003cli\u003eSheet size, part size, nesting needs, and production volume\u003c\/li\u003e\n\u003cli\u003eExpected shift schedule, operator experience, and cut quality requirements\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP, unloading access, rigging plan, and available floor space\u003c\/li\u003e\n\u003cli\u003ePower, assist gas, compressor\/air planning, chiller\/accessory needs, startup, and training\u003c\/li\u003e\n\u003cli\u003eDrawings, sample parts, photos, or production examples for application review\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuote Path\u003c\/h3\u003e\n\u003cp\u003eRequest a complete machine package quote with material details, thickness range, part size, delivery ZIP, installation\/startup needs, and drawings if available. UmproTech can review machine fit, accessories, training, delivery planning, and written quote terms before invoice.\u003c\/p\u003e\n\u003ch3\u003eFinancing Review\u003c\/h3\u003e\n\u003cp\u003eEquipment financing may be available for qualified buyers. Start here: \u003ca href=\"https:\/\/ceilingfinancial.fillout.com\/umprotech\"\u003eUmproTech financing application\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinancing disclosure:\u003c\/strong\u003e Final approval and terms depend on lender review, buyer profile, equipment type, invoice amount and program availability.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFinal specs, accessories, freight, taxes, installation scope, delivery timing, and written invoice terms should be confirmed before purchase.\u003c\/em\u003e\u003c\/p\u003e","brand":"UmproTech","offers":[{"title":"Ready to Ship","offer_id":52963707912558,"sku":null,"price":74900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/6000-w-fiber-laser-cutting-machine-3015-5-ft-10-ft-6384942_8257b632-5731-4734-a386-f3343eb977cd.jpg?v=1780018264"},{"product_id":"umprotech-enclosed-fiber-laser-6kw-4x4ft","title":"UmproTech 6kW 4x4 Enclosed Fiber Laser Machine USA | Compact Power RFQ","description":"\u003ch2\u003e6kW 4x4 Enclosed Fiber Laser Machine for Compact High-Power Cutting\u003c\/h2\u003e\u003cp\u003eThe UmproTech 6kW 4x4 enclosed fiber laser is built for U.S. job shops, maintenance teams, prototype departments and production cells that need higher cutting power in a compact footprint. It fits buyers who want enclosed fiber laser capacity without committing floor space to a larger table.\u003c\/p\u003e\u003ch3\u003eApplication Fit\u003c\/h3\u003e\u003cp\u003eBest-fit applications include small-to-medium metal parts, brackets, covers, maintenance repair parts, prototype components, cabinet samples, production blanks and compact cell work where power and footprint both matter.\u003c\/p\u003e\u003ch3\u003eMachine and Tooling Review\u003c\/h3\u003e\u003cp\u003eUmproTech can review material type, thickness range, part size, assist gas, nozzles, lens consumables, compressor or gas supply, dust\/fume handling, software workflow and shop power before quote. Final configuration should be confirmed against your cutting application.\u003c\/p\u003e\u003ch3\u003eRental, Lease-to-Own and Financing Path\u003c\/h3\u003e\u003cp\u003eFor shops comparing cash purchase, rental or lease-to-own access, financing review is available for qualified buyers here: \u003ca href=\"https:\/\/ceilingfinancial.fillout.com\/umprotech\"\u003eUmproTech financing application\u003c\/a\u003e. Final approval and terms depend on lender review, buyer profile, equipment type, invoice amount and program availability.\u003c\/p\u003e\u003ch3\u003eStartup and Training\u003c\/h3\u003e\u003cp\u003eQuote planning can include delivery ZIP, unloading access, floor space, electrical requirements, startup support, software handoff and operator training.\u003c\/p\u003e\u003ch3\u003eBuyer Checklist\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial type and maximum thickness\u003c\/li\u003e\n\u003cli\u003eTypical part size and sheet size\u003c\/li\u003e\n\u003cli\u003eProduction volume and cutting speed goals\u003c\/li\u003e\n\u003cli\u003eAssist gas, compressor or gas supply plan\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP, unloading access, floor space and power\u003c\/li\u003e\n\u003cli\u003eStartup, training, rental or financing interest\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQuote path:\u003c\/strong\u003e Send material, thickness, part size, drawings\/photos if available, production volume and delivery ZIP for a written UmproTech quote.\u003c\/p\u003e","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966013763950,"sku":"UFL-4x4-6KW-ENC","price":119900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-enclosed-fiber-laser-cutter-12kw-4x4ft-fscut-cypcut-1017946.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-6kw-4x8ft","title":"Umprotech Enclosed Fiber Laser Cutter 6kW 4x8ft FSCUT","description":"\u003ch2\u003e6kW 4x8 Enclosed Fiber Laser Cutting Cell\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eProduction-focused enclosed fiber laser for U.S. shops that need delivered quote review, startup planning and support before purchase.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis machine is for buyers comparing more than base price. The quote path should include cutting application, controller workflow, chiller, exhaust, assist gas, site power, training, consumables and documentation needs.\u003c\/p\u003e\u003ch3\u003eBest fit for\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSheet metal job shops\u003c\/li\u003e\n\u003cli\u003eManufacturers bringing cutting in-house\u003c\/li\u003e\n\u003cli\u003eShops upgrading from plasma or lower-power lasers\u003c\/li\u003e\n\u003cli\u003eBuyers reviewing shop readiness before quote\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat to send\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial and thickness range\u003c\/li\u003e\n\u003cli\u003eSheet size and part type\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and available power\u003c\/li\u003e\n\u003cli\u003eAssist gas, chiller and exhaust needs\u003c\/li\u003e\n\u003cli\u003eTraining, consumables and documentation needs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReadiness notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReview enclosure and viewing-window needs\u003c\/li\u003e\n\u003cli\u003eConfirm exhaust, ventilation and gas planning\u003c\/li\u003e\n\u003cli\u003eConfirm electrical and local site requirements\u003c\/li\u003e\n\u003cli\u003eRequest manuals, spec sheets or certificates if needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNext step:\u003c\/strong\u003e send material, thickness, ZIP code, shop power and documentation needs so UmproTech can confirm the next quote path.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFinal configuration, delivery, startup, training, documentation, safety options, certificates and pricing must be confirmed before invoice.\u003c\/em\u003e\u003c\/p\u003e","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966013895022,"sku":"UFL-4x8-6KW-ENC","price":59900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-12kw-enclosed-fiber-laser-cutter-6x20ft-fscut-5723155.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-6kw-5x10ft","title":"UmproTech 6kW 5x10 Enclosed Fiber Laser Machine USA | Production RFQ","description":"\u003ch2\u003e6kW 5x10 Enclosed Fiber Laser Machine for U.S. Fabrication Shops\u003c\/h2\u003e\u003cp\u003eThe UmproTech 6kW 5x10 enclosed fiber laser is positioned for fabrication shops, manufacturers, and job shops that need stronger in-house sheet metal production, cleaner workflow, and a clear quote path.\u003c\/p\u003e\u003ch3\u003eBest Fit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGrowing metal fabrication shops\u003c\/li\u003e\n\u003cli\u003eShops upgrading from plasma or outsourced cutting\u003c\/li\u003e\n\u003cli\u003eProduction sheet metal work\u003c\/li\u003e\n\u003cli\u003eBuyers comparing delivered equipment packages\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuote Path\u003c\/h3\u003e\u003cp\u003eRequest a delivered quote with machine configuration, delivery ZIP code, startup support, training option, compressor or accessory needs, and financing direction.\u003c\/p\u003e\u003ch3\u003eNeed Capacity Before Buying?\u003c\/h3\u003e\u003cp\u003eAsk about rental, short-term capacity, or rent-before-buy options if your shop has project backlog, overflow production, temporary cutting demand, or wants to evaluate workflow before a full equipment purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinancing is available for qualified buyers, typically with 24-60 month options. Some programs may offer 3 months no payments when applicable, subject to approval and lender terms.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFinal pricing, stock, freight, taxes, configuration, accessories, rental availability, and delivery timing must be confirmed before invoice or agreement.\u003c\/p\u003e","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966015107438,"sku":"UFL-5x10-6KW-ENC","price":69900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-12kw-enclosed-fiber-laser-cutter-6x20ft-fscut-5723155.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-6kw-6x12ft","title":"Umprotech Enclosed Fiber Laser Cutter 6kW 6x12ft FSCUT","description":"\u003csection class=\"umpro-product umpro-product--flagship\"\u003e\u003c!-- HERO \/ OVERVIEW --\u003e\u003cheader class=\"umpro-product__hero\"\u003e\n\u003cp class=\"umpro-product__eyebrow\"\u003eEnclosed Fiber Laser Cutting Cell · High-Power 6×12 Platform\u003c\/p\u003e\n\u003ch2 class=\"umpro-product__title\"\u003eUmprotech Enclosed Fiber Laser Cutter – 6 kW · 6×12 ft · FSCUT \/ CypCut\u003c\/h2\u003e\n\u003cp class=\"umpro-product__subtitle\"\u003eA fully enclosed, \u003cstrong\u003eproduction-grade 6 kW fiber laser system\u003c\/strong\u003e on a \u003cstrong\u003e6×12 ft (72×144\") bed\u003c\/strong\u003e, engineered for US job shops, OEMs, and fabrication cells that need \u003cstrong\u003ehigh-throughput cutting of large-format sheets\u003c\/strong\u003e in steel, stainless, aluminum, and brass. Combining a 6 kW Raycus or IPG source with FSCUT industrial control and CypCut CAM\/nesting, this system is built for \u003cstrong\u003euptime, repeatable quality, and efficient part flow\u003c\/strong\u003e in demanding mixed-metal environments.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__hero-grid\"\u003e\n\u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber (Raycus \/ IPG) · \u003cstrong\u003eBed size:\u003c\/strong\u003e 6×12 ft (72×144\") · \u003cstrong\u003eController:\u003c\/strong\u003e FSCUT with CypCut CAM \/ nesting\u003c\/p\u003e\n\u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 · \u003cstrong\u003eHead:\u003c\/strong\u003e Auto-focus fiber cutting head · \u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e \/ O\u003csub\u003e2\u003c\/sub\u003e \/ air (configuration dependent)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"umpro-product__hero-points\"\u003e\n\u003cli\u003e6 kW fiber power for high-speed cutting on thin, mid-gauge, and selected thick materials\u003c\/li\u003e\n\u003cli\u003eLarge 6×12 ft format for high-yield nesting, large panels, and long parts\u003c\/li\u003e\n\u003cli\u003eClass 1 fully enclosed cell with integrated fume extraction and industrial chiller\u003c\/li\u003e\n\u003cli\u003eFSCUT controller with CypCut for intelligent nesting, simulation, and diagnostics\u003c\/li\u003e\n\u003cli\u003eEngineered for multi-shift production, uptime, and low rework rates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/header\u003e\u003c!-- POSITIONING \/ VALUE FOR US BUYERS --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 6 kW, 6×12 ft enclosed fiber laser is designed as a \u003cstrong\u003ehigh-power, large-format production engine\u003c\/strong\u003e for shops that rely on laser cutting as a core throughput constraint. It’s aimed at operations where \u003cstrong\u003ecycle time, full-sheet utilization, and repeatable quality\u003c\/strong\u003e across a wide thickness range directly influence output, margins, and delivery reliability.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 kW fiber laser (Raycus \/ IPG):\u003c\/strong\u003e provides the power needed for high-speed cutting on thin and mid-gauge sheets and extends into solid thick-plate capability on mild steel, stainless, and aluminum. Compared to 2–3 kW systems, 6 kW significantly shortens pierce times and linear cutting times on many gauges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge 6×12 ft (72×144\") bed:\u003c\/strong\u003e accommodates full-size 6×12 sheets used in heavy fabrication, machinery, and architectural work. Enables high part density, kit-based nesting, and large panels or long profiles without re-positioning or multiple setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-cover, Class 1 enclosure:\u003c\/strong\u003e light-tight, interlocked housing with viewing windows and internal lighting. Helps contain process light and a significant portion of fume, simplifying safety audits and laser zoning in busy shop environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e automatically adapts focus to material thickness and moderate sheet warp across the full 6×12 envelope. Supports consistent kerf width, edge quality, and pierce behavior on mixed nests and stacked jobs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFSCUT controller with CypCut CAM:\u003c\/strong\u003e widely adopted industrial control stack for flat-sheet lasers. Offers intelligent nesting, micro-joint and common-line control, advanced lead-in\/out strategies, and simulation—reducing scrap, programming time, and setup uncertainty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated fume extraction \u0026amp; industrial chiller:\u003c\/strong\u003e supplied as part of the system, not as separate projects. Stable cooling and fume handling are critical for sustaining 6 kW output and protecting optics and electronics over multi-shift production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixed-metal production capability:\u003c\/strong\u003e supports carbon steel, stainless, aluminum, and brass within defined thickness ranges. Assist gas strategies can be tuned for weld-ready edges, cosmetic parts, or cost-focused cutting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for uptime \u0026amp; integration:\u003c\/strong\u003e suited as the primary cutting asset in cells feeding press brakes, panel benders, robotic welding, and assembly lines where laser output drives overall part flow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003c!-- PERFORMANCE OVERVIEW --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--performance\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003ePerformance: 6 kW power · 6×12 ft full-sheet capacity\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003e6 kW fiber source\u003c\/strong\u003e on a \u003cstrong\u003e6×12 ft bed\u003c\/strong\u003e is tuned for fabrication shops and OEMs where cutting speed, reliable pierce performance, and full-sheet nesting all matter. It provides a strong compromise between ultra high-power (8–12 kW) and mid-power (2–3 kW) systems, offering robust performance on both thinner gauges and demanding thicker jobs.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__metrics-grid\"\u003e\n\u003cdiv class=\"umpro-product__metric\"\u003e\n\u003cp class=\"umpro-product__metric-label\"\u003eTypical material coverage*\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon\/mild steel: thin sheet through demanding mid-to-thick plate (application dependent)\u003c\/li\u003e\n\u003cli\u003eStainless steel: thin and mid-gauge plus selected thicker sections with tuned parameters\u003c\/li\u003e\n\u003cli\u003eAluminum: a wide range of panel and plate thicknesses used in frames, enclosures, and structural parts\u003c\/li\u003e\n\u003cli\u003eBrass and copper alloys: defined thickness ranges supported with appropriate assist gas and parameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__metric-note\"\u003e*Exact thickness limits depend on alloy, assist gas, nozzle, cut parameters, and edge-quality requirements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__metric\"\u003e\n\u003cp class=\"umpro-product__metric-label\"\u003eThroughput characteristics*\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSubstantial speed gains over 2–3 kW systems in many gauge ranges\u003c\/li\u003e\n\u003cli\u003eShorter pierce times and stronger cut-through behavior in thicker materials\u003c\/li\u003e\n\u003cli\u003eHigh part counts per sheet thanks to the 6×12 nesting area and 6 kW cut speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__metric-note\"\u003e*Best evaluated with your actual nests and thickness mix under realistic gas and duty-cycle conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__metric\"\u003e\n\u003cp class=\"umpro-product__metric-label\"\u003eQuality \u0026amp; repeatability*\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEdge quality suitable for welding, coating, or light machining with tuned process windows\u003c\/li\u003e\n\u003cli\u003eStable cut quality across full-sheet nests and repeat jobs with defined parameter libraries\u003c\/li\u003e\n\u003cli\u003eCapability to standardize results across shifts via FSCUT\/CypCut recipes and checklists\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__metric-note\"\u003e*Critical tolerances and finish should be validated via sample cutting on your material and fixtures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c!-- DETAILED TECHNICAL SPECIFICATIONS --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n\u003cp\u003eThe 6 kW 6×12 Umprotech enclosed fiber laser is delivered as a \u003cstrong\u003ecomplete cutting cell\u003c\/strong\u003e. The fiber source, motion system, auto-focus head, control hardware\/software, enclosure, extraction, and chiller are engineered to work together when installed according to specification.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__specs-grid\"\u003e\n\u003c!-- LASER SOURCE --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eLaser power \u0026amp; source\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber (Raycus or IPG)\u003c\/p\u003e\n\u003cp\u003e6 kW is a \u003cstrong\u003ehigh-power configuration\u003c\/strong\u003e targeting operations where:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eLaser cutting is a primary throughput constraint in the fabrication flow\u003c\/li\u003e\n\u003cli\u003eBoth thin sheet and mid-to-thick plate are regularly processed on the same machine\u003c\/li\u003e\n\u003cli\u003eCycle-time reductions versus mid-power platforms translate directly into added capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRaycus and IPG fiber sources are widely used in production environments, providing stable output and recognized service and support networks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- WORKING ENVELOPE --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eWorking envelope\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eBed size \/ stroke:\u003c\/strong\u003e 6×12 ft (72×144\") nominal working area\u003c\/p\u003e\n\u003cp\u003eThe 6×12 format is chosen for:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eLarge panels, cabinets, and frames cut from full-size 6×12 sheets\u003c\/li\u003e\n\u003cli\u003eHigh-density nests of smaller parts, kits, and brackets for contract manufacturing\u003c\/li\u003e\n\u003cli\u003eReduced skeleton and offcut handling versus smaller sheet formats\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRemnants can be defined as custom sheet sizes in CypCut to maximize material utilization across jobs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- CONTROLLER \/ CAM --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eController \u0026amp; CAM \/ nesting\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eControl:\u003c\/strong\u003e FSCUT industrial motion and laser controller\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSoftware:\u003c\/strong\u003e CypCut CAM \/ nesting\u003c\/p\u003e\n\u003cp\u003eFSCUT + CypCut provide an end-to-end programming environment tuned for high-power flat-sheet cutting:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eDXF\/STEP import from your CAD system\u003c\/li\u003e\n\u003cli\u003eAutomatic and manual nesting on full 6×12 sheets and remnant sizes\u003c\/li\u003e\n\u003cli\u003eLead-in\/lead-out optimization, micro-joints, corner smoothing, and sequence control\u003c\/li\u003e\n\u003cli\u003eCommon-line cutting and bridging to reduce pierces and cycle time\u003c\/li\u003e\n\u003cli\u003eSimulation and on-screen preview of nests and toolpaths prior to cutting\u003c\/li\u003e\n\u003cli\u003eDiagnostic tools linked to I\/O, alarms, and motion\/laser status\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause the control stack is widely used, operators can often leverage prior FSCUT\/CypCut experience, shortening training time.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- CUTTING HEAD --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eCutting head \u0026amp; auto-focus\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Auto-focus fiber cutting head with capacitive height sensing\u003c\/p\u003e\n\u003cp\u003eOn a 6 kW platform, the cutting head is critical for reliability and edge quality. The auto-focus design:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eAdjusts focal position for different material thicknesses and alloys\u003c\/li\u003e\n\u003cli\u003eMaintains consistent standoff distance across the 6×12 working area, even with moderate sheet warp\u003c\/li\u003e\n\u003cli\u003eReduces manual focus adjustments and supports mixed nests across multiple gauges\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eParameter libraries in CypCut tie focus, gas pressure, and speed to each material\/thickness combination for repeatable results.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ENCLOSURE \/ SAFETY --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eEnclosure \u0026amp; safety\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 light-tight housing with interlocks\u003c\/p\u003e\n\u003cp\u003eThe enclosure is engineered for high-power operation in shared production spaces:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eInterlocked doors that stop cutting when opened or not fully closed\u003c\/li\u003e\n\u003cli\u003eViewing windows for visual confirmation of pierce and cut behavior\u003c\/li\u003e\n\u003cli\u003eInternal lighting and access points for setup, loading, and cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eClass 1 design simplifies safety reviews and usually reduces the need for large exclusion zones around the machine.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- UTILITIES \/ CHILLER \/ EXTRACTION --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eUtilities, chiller \u0026amp; fume extraction\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e industrial chiller and integrated fume extraction system\u003c\/p\u003e\n\u003cp\u003eAt 6 kW, stable cooling and fume management are essential:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eChiller circuits for the laser source and optics maintain temperature within specified ranges\u003c\/li\u003e\n\u003cli\u003eExtraction hoods capture fumes at the cutting area and route them to your plant exhaust\/filtration\u003c\/li\u003e\n\u003cli\u003eStable thermal and air conditions support consistent cut quality and machine longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!-- ASSIST GASES --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eAssist gases \u0026amp; process strategy\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, and air (configuration dependent)\u003c\/p\u003e\n\u003cp\u003eTypical gas use patterns on a 6 kW system:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOxygen:\u003c\/strong\u003e high-speed cutting of mild steel with oxidized edges; often used for thicker sections where throughput is a priority.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNitrogen:\u003c\/strong\u003e bright, oxide-free edges on stainless and aluminum, and carbon steel where weld-ready or cosmetic edges are required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry air:\u003c\/strong\u003e cost-focused option where a light oxide tint is acceptable, with careful tuning of parameters and drying\/filtration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e6 kW systems can have significant gas consumption; we can help size cylinders, bulk tanks, or compressor systems based on duty cycle and material mix.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- MOTION SYSTEM --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eMotion system \u0026amp; structure\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eMotion:\u003c\/strong\u003e servo-driven gantry with precision linear guidance\u003c\/p\u003e\n\u003cp\u003eThe motion platform is tuned to exploit 6 kW cutting speeds without sacrificing part accuracy:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eSmooth interpolation on long 6×12 paths and complex geometries\u003c\/li\u003e\n\u003cli\u003eConsistent hole and profile geometry across full-sheet nests\u003c\/li\u003e\n\u003cli\u003eRobust performance for continuous-duty job-shop and OEM environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!-- ELECTRICAL \/ FOOTPRINT --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eElectrical \u0026amp; footprint (high level)\u003c\/h4\u003e\n\u003cp\u003eDetailed drawings and electrical specifications are provided during the quoting and planning phase. In general, the system is intended for:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eUS industrial 3-phase power sized for a 6 kW laser, chiller, and motion\/control hardware\u003c\/li\u003e\n\u003cli\u003eInstallation in fabrication bays or dedicated laser areas with space for 6×12 sheet handling\u003c\/li\u003e\n\u003cli\u003eRigging paths and floor loading typical of large-format enclosed high-power lasers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePre-install planning focuses on power, access, and layout so commissioning can focus on actual parts and parameters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"umpro-product__note\"\u003e\u003cem\u003e Practical cutting capacity, tolerances, and throughput depend on alloy, assist gas, nozzle selection, nesting strategy, and edge-quality expectations. For critical work, we recommend qualification runs and agreed parameter windows before committing to production tolerances and cycle-time promises. \u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- APPLICATIONS \/ USE CASES --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n\u003cp\u003eThe 6 kW, 6×12 ft Umprotech enclosed fiber laser is typically deployed as a \u003cstrong\u003ehigh-throughput large-format production cell\u003c\/strong\u003e in fabrication shops, OEM plants, and contract manufacturers. It can run as a standalone cutting station or be integrated with forming, machining, and welding steps in a tightly coupled workflow.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__usecases-grid\"\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eLarge panels \u0026amp; cabinets\u003c\/h4\u003e\n\u003cp\u003eCutting large machine panels, cabinet sides, base plates, and access covers from full 6×12 sheets for machinery, enclosures, and architectural systems, with bend lines and features matched to downstream forming.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eFrames, brackets \u0026amp; structural components\u003c\/h4\u003e\n\u003cp\u003eHigh-speed cutting of frames, gussets, stiffeners, and structural sheet elements in steel, stainless, and aluminum, where 6 kW power and 6×12 nesting combine to support demanding part flows.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eHVAC \u0026amp; building systems\u003c\/h4\u003e\n\u003cp\u003eProduction of large-format duct panels, plenums, rails, and brackets with high sheet utilization and strong cut quality, suitable for bending and on-site installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eOEM component kits \u0026amp; assemblies\u003c\/h4\u003e\n\u003cp\u003eKit-based nesting for OEM assemblies: combining panels, brackets, and small hardware plates on the same 6×12 sheet. 6 kW power keeps cycle times compatible with downstream robotic welding and high-throughput assembly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eSignage \u0026amp; architectural metalwork\u003c\/h4\u003e\n\u003cp\u003eCutting large signage, architectural screens, and decorative panels in steel, stainless, and aluminum, where a 6×12 format allows big pieces or multi-panel layouts with minimal splicing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eHigh-mix \/ high-throughput job-shop work\u003c\/h4\u003e\n\u003cp\u003eContract manufacturing and job shops running mixed nests, frequent changeovers, and repeat orders, where 6 kW power and 6×12 sheet usage help keep lead times and material waste under control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003ePrototyping \u0026amp; pilot production on production hardware\u003c\/h4\u003e\n\u003cp\u003eEngineering teams validate designs, nests, and material strategies on the same 6 kW platform used for full-scale production, reducing risk when shifting from prototypes to volume jobs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eIntegration into automated cells\u003c\/h4\u003e\n\u003cp\u003eServes as the cutting front-end of an automated fabrication cell with load\/unload systems, towers, press brakes, and robotic welding where high cut speed and large-sheet nesting help prevent the laser from becoming a bottleneck.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eIn many operations, the 6 kW 6×12 cell becomes the \u003cstrong\u003eprimary large-format production asset\u003c\/strong\u003e, with lower-power or smaller-bed machines handling prototypes, niche materials, or specialized work.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- CONFIGURATIONS \u0026 OPTIONS --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 6 kW 6×12 enclosed fiber laser is supplied as a \u003cstrong\u003eready-to-run production platform\u003c\/strong\u003e. All core systems—fiber source, auto-focus head, FSCUT control, full enclosure, fume extraction, and chiller—are included. Configuration options allow alignment with your material mix, gas strategy, and internal standards.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber source options:\u003c\/strong\u003e 6 kW Raycus or 6 kW IPG, chosen based on installed base, preferred service partners, and corporate standards for laser sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssist gas configuration:\u003c\/strong\u003e support for N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, and air (configuration dependent). We can help specify gas storage, pressure, and piping for 6 kW duty cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl stack:\u003c\/strong\u003e FSCUT controller with CypCut CAM\/nesting as standard—no separate flat-sheet CAM purchase is required for core programming and simulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e included as standard, with CypCut parameter libraries organized by material and thickness to simplify daily operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-cover enclosure \u0026amp; fume extraction:\u003c\/strong\u003e integrated solution to minimize engineering time around guarding and air handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial chiller:\u003c\/strong\u003e sized for 6 kW operation, supporting stable performance in continuous production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork \u0026amp; file integration:\u003c\/strong\u003e support for network-based job transfer, shared folders, and integration into CAD\/ERP workflows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomation \u0026amp; integration support:\u003c\/strong\u003e guidance for connection to material towers, load\/unload systems, conveyors, or robotic cells surrounding the 6×12 platform.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor specialized requirements—unique alloys, internal OEM standards, or specific cell concepts—we can collaborate with your engineering and operations teams to define recommended configurations and workflows around the 6 kW 6×12 cell.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- IMPLEMENTATION \u0026 SUPPORT --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n\u003cp\u003eIntegrating a \u003cstrong\u003e6 kW 6×12 fiber laser\u003c\/strong\u003e is a strategic decision. We support US job shops, OEMs, and integrators from early evaluation through installation and ramp-up, focusing on \u003cstrong\u003ereal parts, realistic cycle times, and sustainable processes\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-installation planning:\u003c\/strong\u003e review of power capacity, exhaust routing, gas supply (N\u003csub\u003e2\u003c\/sub\u003e\/O\u003csub\u003e2\u003c\/sub\u003e\/air), floor layout, and rigging routes so that site preparation is clear before the machine ships.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart \u0026amp; material review:\u003c\/strong\u003e evaluation of representative parts, materials, and thickness ranges to confirm that a 6 kW 6×12 configuration is appropriately sized for your workload and growth plans.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCypCut workflow setup:\u003c\/strong\u003e assistance with nesting strategies, layer conventions, micro-joint and lead-in rules, and parameter library structure tuned to your alloys and thicknesses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator \u0026amp; maintenance training:\u003c\/strong\u003e onsite or remote training covering safe operation, startup\/shutdown, daily checks, basic troubleshooting, and routine maintenance (nozzles, lenses, filters, cleaning).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOngoing process support:\u003c\/strong\u003e support for new materials, cut-quality optimization, cycle-time improvements, and integration questions as you move more work onto the 6 kW cell.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__cta\"\u003e\u003cstrong\u003eNext step:\u003c\/strong\u003e send representative part files (DXF\/STEP\/PDF) and your material\/thickness ranges. We’ll review fit, estimate cycle times, and recommend a 6 kW 6×12 configuration and assist-gas strategy aligned with your production and ROI targets.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- TECHNICAL FAQ --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--faq umpro-product-faq\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eTechnical FAQ – 6 kW · 6×12 ft enclosed fiber laser\u003c\/h3\u003e\n\u003cdiv class=\"umpro-product-faq__grid\"\u003e\n\u003c!-- FAQ 1 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhen does a 6 kW 6×12 system make more sense than 3 kW or 12 kW?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eA 6 kW 6×12 system is a strong fit when you:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eCut both thin sheet and mid-to-thick material as part of your regular workload\u003c\/li\u003e\n\u003cli\u003eNeed clear throughput gains over 2–3 kW platforms but don’t require full 12 kW capability\u003c\/li\u003e\n\u003cli\u003eWant to balance cutting speed, operating cost, and infrastructure demands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf most work is thin and volumes are moderate, 2–3 kW may be sufficient. If very thick plate and maximum throughput dominate, 12 kW could be justified. For many shops, 6 kW is a strong middle ground.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 2 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhat thickness range is realistic on a 6 kW 6×12 platform?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003e6 kW comfortably covers \u003cstrong\u003ethin and mid-gauge materials\u003c\/strong\u003e and extends into thicker plate in carbon steel, stainless, and aluminum. The exact range depends on:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eMaterial type and alloy (mild vs high-strength steel vs stainless vs aluminum)\u003c\/li\u003e\n\u003cli\u003eAssist gas (N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, air) and available pressure\u003c\/li\u003e\n\u003cli\u003eDesired edge quality (cosmetic, weld-ready, or to-be-machined)\u003c\/li\u003e\n\u003cli\u003eRequired cycle times and expected duty cycle on thicker jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe recommend validating your key thickness ranges with sample cuts and tuned parameters before finalizing production specs and customer commitments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 3 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow does 6 kW power affect assist gas consumption and operating costs?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eAt 6 kW, assist gas flow rates and pressures often increase compared to 2–3 kW, especially on thick or high-speed cuts. However, cycle times usually drop, so:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eGas usage per minute may rise, but gas usage per part can fall due to shorter cuts\u003c\/li\u003e\n\u003cli\u003eBulk gas or optimized cylinder arrangements become more attractive at higher utilization\u003c\/li\u003e\n\u003cli\u003eWell-tuned parameters are essential to balance gas costs, edge quality, and consumable life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe can help estimate gas cost per part and suggest supply strategies based on your part mix and duty cycle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 4 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow does CypCut handle nesting and remnant management on 6×12 sheets?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eCypCut is well suited to large-format sheet strategies. It supports:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eAutomatic and interactive nesting on full 6×12 sheets\u003c\/li\u003e\n\u003cli\u003eDefinition and reuse of remnant sheet sizes\u003c\/li\u003e\n\u003cli\u003eSkeleton and common-line strategies to reduce scrap and pierces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDuring implementation, we can help define nesting rules and naming conventions that make it easy to reuse remnants and track sheet utilization across jobs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 5 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhat facility requirements should we plan for a 6 kW 6×12 installation?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eA 6 kW platform has higher utility demands than low-power systems. You should plan for:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eAppropriate 3-phase power capacity for laser, chiller, and motion\/control loads\u003c\/li\u003e\n\u003cli\u003eAssist gas storage and pressure rated for 6 kW duty (cylinders or bulk supply)\u003c\/li\u003e\n\u003cli\u003eExhaust or filtration sized for fume generation from high-speed, high-energy cuts\u003c\/li\u003e\n\u003cli\u003eFloor space, rigging paths, and clearances compatible with a 6×12 enclosed laser\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese details are covered in pre-install documentation and reviewed jointly during planning.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 6 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow complex is operator training on a 6 kW FSCUT + CypCut system?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eOperators with prior CNC, laser, or fabrication experience typically adapt quickly. Training emphasizes:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eSafe operation of a 6 kW system and understanding interlocks and safety states\u003c\/li\u003e\n\u003cli\u003eLoading nests, selecting materials and thickness libraries, and making controlled parameter adjustments\u003c\/li\u003e\n\u003cli\u003eResponding to alarms, interpreting diagnostics, and performing basic maintenance and inspection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eParameter libraries, visual nests, and clear procedures help maintain consistency across shifts and operators.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 7 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhat does routine maintenance look like on a 6 kW system, and how critical is it?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eAt 6 kW, routine maintenance is especially important to keep optics clean and processes stable. Typical tasks include:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eRoutine inspection and cleaning\/replacement of nozzles and protective windows\u003c\/li\u003e\n\u003cli\u003eChecking assist gas filters, hoses, and fittings for contamination and leaks\u003c\/li\u003e\n\u003cli\u003eMonitoring chiller operation, fluid levels, and alarm logs\u003c\/li\u003e\n\u003cli\u003eCleaning the cutting area, removing slag, and inspecting motion components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe provide maintenance schedules and checklists, and training covers how to perform these tasks safely and systematically.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 8 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow does the Class 1 enclosure affect safety programs and shop layout?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eThe Class 1 enclosure is designed to contain the beam and process light under normal operation, which:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eHelps confine laser hazards largely to the enclosure and loading\/unloading zones\u003c\/li\u003e\n\u003cli\u003eTypically avoids the need for broad-area laser eyewear in the surrounding shop\u003c\/li\u003e\n\u003cli\u003eShifts safety emphasis towards interlocks, lockout\/tagout, and procedural controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis can simplify placement of the machine near press brakes, welding cells, and assembly areas within the same fabrication bay.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 9 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eCan the 6 kW 6×12 system integrate with our existing CAD\/ERP\/MES workflow?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eYes. Integration typically looks like:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eGeometry and BOM data maintained in your existing CAD and ERP\/MRP tools\u003c\/li\u003e\n\u003cli\u003eFlat patterns exported as DXF\/STEP with naming that matches part numbers and revisions\u003c\/li\u003e\n\u003cli\u003eCypCut importing those files for nesting, parameter assignment, and job simulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe can help define folder structures, naming conventions, and job-release steps so that engineering, planning, and the laser cell are synchronized.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 10 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow do we determine if a 6 kW 6×12 configuration is the right investment for our shop?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eThe best approach is to evaluate your \u003cstrong\u003eactual parts, volumes, and bottlenecks\u003c\/strong\u003e. We typically analyze:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eYour material and thickness distribution across key product families\u003c\/li\u003e\n\u003cli\u003ePart geometries, edge-quality requirements, and tolerances\u003c\/li\u003e\n\u003cli\u003eCurrent constraints in cutting, forming, welding, and assembly\u003c\/li\u003e\n\u003cli\u003eExpected utilization and ROI versus lower-power and higher-power alternatives\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUsing your real data, we can recommend whether a 6 kW 6×12 system should be your primary cutting platform, part of a multi-laser strategy, or a staged upgrade in your broader capacity plan.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c\/div\u003e\n\u003cp class=\"umpro-product-faq__closing\"\u003e\u003cstrong\u003eStill evaluating 6 kW on a 6×12 platform?\u003c\/strong\u003e Share representative part files and your material\/thickness mix. We’ll prepare a targeted assessment and configuration recommendation for your 6 kW 6×12 enclosed fiber laser cell.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966015893870,"sku":"UFL-6x12-6KW-ENC","price":189900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-12kw-enclosed-fiber-laser-cutter-6x20ft-fscut-5723155.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-6kw-6x20ft","title":"UmproTech 6kW 6x20 Enclosed Fiber Laser Machine USA | Long-Format RFQ","description":"\u003ch2\u003e6kW 6x20 Enclosed Fiber Laser Machine for Long-Format Production\u003c\/h2\u003e\u003cp\u003eThe UmproTech 6kW 6x20 enclosed fiber laser supports U.S. fabrication shops and production teams that need long sheet capacity, enclosed cutting and quote-ready planning for larger part families.\u003c\/p\u003e\u003ch3\u003eApplication Fit\u003c\/h3\u003e\u003cp\u003eGood-fit work includes long panels, equipment covers, fabrication blanks, cabinet and enclosure sections, repair parts, brackets and contract cutting jobs where a 6x20 table helps reduce handling limits.\u003c\/p\u003e\u003ch3\u003eMachine and Tooling Review\u003c\/h3\u003e\u003cp\u003eUmproTech can review material type, maximum thickness, sheet length, drawings, cut volume, assist gas, nozzles, lens consumables, compressor or gas supply, dust and fume handling, nesting workflow and shop power before quote.\u003c\/p\u003e\u003ch3\u003eRental, Lease-to-Own and Financing Path\u003c\/h3\u003e\u003cp\u003eFor shops comparing purchase, rental or lease-to-own access, financing review is available for qualified buyers here: \u003ca href=\"https:\/\/ceilingfinancial.fillout.com\/umprotech\"\u003eUmproTech financing application\u003c\/a\u003e. Final approval and terms depend on lender review, buyer profile, equipment type, invoice amount and program availability.\u003c\/p\u003e\u003ch3\u003eStartup and Training\u003c\/h3\u003e\u003cp\u003eQuote planning can include delivery ZIP, unloading access, floor space, electrical requirements, startup support, software handoff and operator training.\u003c\/p\u003e\u003ch3\u003eBuyer Checklist\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial type and maximum thickness\u003c\/li\u003e\n\u003cli\u003eLong sheet size and maximum part length\u003c\/li\u003e\n\u003cli\u003eDrawings\/photos and expected production volume\u003c\/li\u003e\n\u003cli\u003eAssist gas, compressor or gas supply plan\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP, unloading access, floor space and power\u003c\/li\u003e\n\u003cli\u003eStartup, training, rental or financing interest\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQuote path:\u003c\/strong\u003e Send material, thickness, sheet length, application, production volume and delivery ZIP for a written UmproTech quote.\u003c\/p\u003e","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966016057710,"sku":"UFL-6x20-6KW-ENC","price":239900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-12kw-enclosed-fiber-laser-cutter-6x20ft-fscut-5723155.png?v=1772248807"},{"product_id":"umprotech-enclosed-tube-laser-6kw-4in-x-20ft","title":"UmproTech 6kW 4in x 20ft Enclosed Tube Laser USA | RFQ","description":"\u003ch2\u003e6kW 4in x 20ft Enclosed Tube Laser for High-Power Small Tube Cutting\u003c\/h2\u003e\u003cp\u003eThe UmproTech 6kW 4in x 20ft enclosed tube laser is built for U.S. production shops, railing and handrail fabricators, OEM tube part suppliers and contract tube cutting teams that need high-power cutting on smaller tube profiles.\u003c\/p\u003e\u003ch3\u003eApplication Fit\u003c\/h3\u003e\u003cp\u003eGood-fit applications include railing systems, handrail parts, small frames, supports, brackets, repeat OEM tube parts, production tube assemblies and contract fabrication jobs.\u003c\/p\u003e\u003ch3\u003eMachine, Chuck and Loading Review\u003c\/h3\u003e\u003cp\u003eUmproTech can review tube diameter, profile type, wall thickness, material, maximum tube length, cut features, drawings, chuck option, loading workflow, assist gas, consumables and shop power before quote.\u003c\/p\u003e\u003ch3\u003eRental, Lease-to-Own and Financing Path\u003c\/h3\u003e\u003cp\u003eFor buyers comparing purchase, rental or lease-to-own access, financing review is available for qualified buyers here: \u003ca href=\"https:\/\/ceilingfinancial.fillout.com\/umprotech\"\u003eUmproTech financing application\u003c\/a\u003e. Final approval and terms depend on lender review, buyer profile, equipment type, invoice amount and program availability.\u003c\/p\u003e\u003ch3\u003eStartup and Training\u003c\/h3\u003e\u003cp\u003eQuote planning can include delivery ZIP, unloading access, floor space, electrical requirements, startup support, tube software handoff and operator training.\u003c\/p\u003e\u003ch3\u003eBuyer Checklist\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTube diameter, profile and wall thickness\u003c\/li\u003e\n\u003cli\u003eMaximum tube length and part length\u003c\/li\u003e\n\u003cli\u003eDrawings\/photos and cut features\u003c\/li\u003e\n\u003cli\u003eBase, 3-chuck or auto-loader interest\u003c\/li\u003e\n\u003cli\u003eAssist gas, consumables and shop power\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP, startup, training and financing interest\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQuote path:\u003c\/strong\u003e Send tube size, wall thickness, material, drawings\/photos, production volume and delivery ZIP for a written UmproTech quote.\u003c\/p\u003e","brand":"Umprotech","offers":[{"title":"Base","offer_id":52966017597806,"sku":"UTL-4IN-20FT-6KW-ENC-B","price":139900.0,"currency_code":"USD","in_stock":true},{"title":"3-Chuck","offer_id":52966017630574,"sku":"UTL-4IN-20FT-6KW-ENC-3C","price":151900.0,"currency_code":"USD","in_stock":true},{"title":"3-Chuck + Auto Loader","offer_id":52966017663342,"sku":"UTL-4IN-20FT-6KW-ENC-3C-AL","price":171900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-enclosed-tube-laser-6kw-o10in-x-40ft-fscut-tube-cnc-5770431.png?v=1772248625"},{"product_id":"umprotech-enclosed-tube-laser-6kw-6in-x-20ft","title":"Umprotech Enclosed Tube Laser 6kW Ø6in x 20ft (FSCUT CypTube)","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eUmprotech Enclosed Tube Laser – 6 kW · Ø6in x 20ft · FSCUT CypTube\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003eHigh-power, fully enclosed tube fiber laser for US fab shops and OEMs needing fast, precise cutting of round tubes up to Ø6\" and lengths up to 20 ft. Designed for safe, repeatable production with integrated automation and robust control.\u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\n      \u003cstrong\u003eLaser Power:\u003c\/strong\u003e 6 kW  ·  \u003cstrong\u003eMax Tube Diameter:\u003c\/strong\u003e Ø6\"  ·  \u003cstrong\u003eMax Workpiece Length:\u003c\/strong\u003e 20 ft (240\")  ·  \u003cstrong\u003eController:\u003c\/strong\u003e FSCUT 5000A \/ CypTube\n    \u003c\/p\u003e\n  \u003c\/header\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e6 kW fiber laser power for fast, clean cuts in steel, stainless, and aluminum tubes.\u003c\/li\u003e\n      \u003cli\u003eProcesses round tubes up to Ø6\" and workpiece lengths up to 20 ft—ideal for frames, racking, and long structural parts.\u003c\/li\u003e\n      \u003cli\u003eFull-cover Class 1 enclosure with integrated fume extraction and industrial chiller for operator safety and shop compliance.\u003c\/li\u003e\n      \u003cli\u003eFSCUT 5000A controller with CypTube software: supports DXF\/STEP import, tube geometry libraries, seam finding, and nesting for remnants.\u003c\/li\u003e\n      \u003cli\u003ePneumatic auto-centering chucks and auto-focus cutting head for quick setups and consistent edge quality across profiles and wall thicknesses.\u003c\/li\u003e\n      \u003cli\u003eOptional bevel head and bundle auto-loader for weld-ready prep and high-throughput, unattended operation.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW (Raycus or IPG fiber source)\u003c\/p\u003e\n        \u003cp\u003eDelivers high cutting speed and quality on a wide range of metals and wall thicknesses.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eTube capacity (round):\u003c\/strong\u003e up to Ø6\"\u003c\/p\u003e\n        \u003cp\u003eHandles common tube sizes for machinery frames, handrails, and racking.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eWorkpiece length:\u003c\/strong\u003e 20 ft (240\")\u003c\/p\u003e\n        \u003cp\u003eSupports long parts and reduces material handling for serial production.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eChucks:\u003c\/strong\u003e Pneumatic, auto-centering\u003c\/p\u003e\n        \u003cp\u003eEnsures fast changeovers and precise clamping for multi-side features.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Auto-focus\u003c\/p\u003e\n        \u003cp\u003eMaintains optimal focus for clean kerf and edge quality across varying gauges.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eController \u0026amp; CAM:\u003c\/strong\u003e FSCUT 5000A with CypTube\u003c\/p\u003e\n        \u003cp\u003ePurpose-built for tube processing: geometry libraries, simulation, nesting, and rotary sync.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1\u003c\/p\u003e\n        \u003cp\u003eLight-tight, interlocked design for safe shop-floor operation.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eUtilities included:\u003c\/strong\u003e Fume extraction \u0026amp; industrial chiller\u003c\/p\u003e\n        \u003cp\u003eSupports consistent uptime and air quality in production environments.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003eThis enclosed tube laser is a core asset for fabrication cells, standalone tube cutting, or as a complement to flatbed lasers and press brakes. Its 20-ft capacity and 6 kW power enable efficient production of long, high-precision tubular parts.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eBrackets, frames, and machine bases for industrial equipment\u003c\/li\u003e\n      \u003cli\u003eHandrails, guardrails, and architectural tube profiles\u003c\/li\u003e\n      \u003cli\u003eWarehouse racking, shelving, and storage systems\u003c\/li\u003e\n      \u003cli\u003eFitness equipment, furniture frames, and vehicle accessories\u003c\/li\u003e\n      \u003cli\u003eHVAC round and rectangular profiles\u003c\/li\u003e\n      \u003cli\u003eGeneral job shop and OEM tube processing (high-mix, low-volume or repeat production)\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003eConfigure your Umprotech tube laser for your production mix and workflow. Multiple automation and clamping options are available to suit different shop requirements.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBase package:\u003c\/strong\u003e 6 kW fiber source, FSCUT 5000A with CypTube, pneumatic auto-centering chucks, full enclosure, fume extraction, and chiller.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e3-Chuck system:\u003c\/strong\u003e Adds a third chuck for enhanced support and accuracy on long or flexible tubes.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e3-Chuck + Auto Loader:\u003c\/strong\u003e Includes bundle auto-loader for unattended bar changes and higher throughput.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBevel cutting head (optional):\u003c\/strong\u003e Enables weld-ready bevels and countersinks in a single pass.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRaycus or IPG fiber source:\u003c\/strong\u003e Choose based on budget, service, and preferred cut mix.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003eWe partner with US job shops and OEMs to ensure a smooth transition from quoting to production. Our team reviews your parts, materials, and thickness ranges to confirm fit and optimize your configuration before purchase.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003ePre-installation guidance on shop layout, power, and floor requirements\u003c\/li\u003e\n      \u003cli\u003eAssistance with sample programs, nesting, and tooling strategies\u003c\/li\u003e\n      \u003cli\u003eOnsite or remote training for operators and programmers\u003c\/li\u003e\n      \u003cli\u003eSupport for integrating with existing lasers, press brakes, and welding cells\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eNext step: Send us a few sample parts (DXF\/STEP\/PDF) and we’ll confirm fit, cycle time, and recommend the right configuration for your workflow.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Base","offer_id":52966018122094,"sku":"UTL-6IN-20FT-6KW-ENC-B","price":147900.0,"currency_code":"USD","in_stock":true},{"title":"3-Chuck","offer_id":52966018154862,"sku":"UTL-6IN-20FT-6KW-ENC-3C","price":159900.0,"currency_code":"USD","in_stock":true},{"title":"3-Chuck + Auto Loader","offer_id":52966018187630,"sku":"UTL-6IN-20FT-6KW-ENC-3C-AL","price":179900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-enclosed-tube-laser-6kw-o10in-x-40ft-fscut-tube-cnc-5770431.png?v=1772248625"},{"product_id":"umprotech-enclosed-tube-laser-6kw-6in-x-26ft","title":"Umprotech Enclosed Tube Laser 6kW Ø6in x 26ft FSCUT Tube","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eUmprotech Enclosed Tube Laser – 6kW · Ø6in x 26ft · FSCUT Tube Control\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003eHigh-power, fully enclosed tube fiber laser for US fabricators. Handles round tubes up to Ø6″ and workpiece lengths up to 26 ft, with 6 kW Raycus or IPG source and FSCUT 5000A\/CypTube control. Designed for safe, repeatable, and efficient production in job shops, OEMs, and automation cells.\u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\n      \u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW  · \n      \u003cstrong\u003eTube capacity:\u003c\/strong\u003e up to Ø6″  · \n      \u003cstrong\u003eWorkpiece length:\u003c\/strong\u003e 26 ft (312″)  · \n      \u003cstrong\u003eController:\u003c\/strong\u003e FSCUT 5000A \/ CypTube\n    \u003c\/p\u003e\n  \u003c\/header\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e6 kW fiber laser (Raycus or IPG) delivers fast, clean cuts on a wide range of tube profiles and wall thicknesses.\u003c\/li\u003e\n      \u003cli\u003eHandles round tubes up to Ø6″ and workpiece lengths up to 26 ft (312″), ideal for frames, racking, and structural jobs.\u003c\/li\u003e\n      \u003cli\u003eFull-cover, Class 1 enclosure with integrated fume extraction and industrial chiller for operator safety and stable uptime.\u003c\/li\u003e\n      \u003cli\u003eAuto-centering pneumatic chucks and auto-focus head for fast changeovers and consistent cut quality across batches.\u003c\/li\u003e\n      \u003cli\u003eFSCUT 5000A with CypTube software supports DXF\/STEP import, tube geometry libraries, nesting, and seam finding for efficient setups.\u003c\/li\u003e\n      \u003cli\u003eOptional bevel head and bundle auto-loader expand productivity for weld-ready prep and high-throughput operations.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber (Raycus\/IPG options)\u003c\/p\u003e\n        \u003cp\u003eHigh power for rapid cutting of mild steel, stainless, and aluminum tubes.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eTube capacity (round):\u003c\/strong\u003e up to Ø6″\u003c\/p\u003e\n        \u003cp\u003eAccommodates a wide range of structural and architectural tube sizes.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eWorkpiece length:\u003c\/strong\u003e 26 ft (312″)\u003c\/p\u003e\n        \u003cp\u003eSupports long stock for frames, rails, and large assemblies without secondary handling.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eChucks:\u003c\/strong\u003e Pneumatic, auto-centering\u003c\/p\u003e\n        \u003cp\u003eFast, accurate tube clamping for repeatable multi-side features and quick setups.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Auto-focus\u003c\/p\u003e\n        \u003cp\u003eMaintains optimal focus for consistent kerf and edge quality across different gauges and profiles.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eControl\/CAM:\u003c\/strong\u003e FSCUT 5000A with CypTube\u003c\/p\u003e\n        \u003cp\u003ePurpose-built for tube cutting: geometry libraries, nesting, seam finding, and simulation.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1\u003c\/p\u003e\n        \u003cp\u003eInterlocked, light-tight design for safe shop-floor operation and fume control.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eUtilities:\u003c\/strong\u003e Fume extraction \u0026amp; industrial chiller included\u003c\/p\u003e\n        \u003cp\u003eEnsures stable operation and clean working environment.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003eThis tube laser is a production-ready solution for fabricators needing precise, repeatable cuts on long tubes. It fits well in standalone forming cells, as a complement to flatbed lasers, or as part of an automated material flow with saws and welding fixtures.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eStructural frames, warehouse racking, and machinery bases\u003c\/li\u003e\n      \u003cli\u003eFitness equipment, furniture, and vehicle chassis components\u003c\/li\u003e\n      \u003cli\u003eArchitectural tubes, handrails, guardrails, and HVAC profiles\u003c\/li\u003e\n      \u003cli\u003eHigh-mix\/low-volume and serial production jobs\u003c\/li\u003e\n      \u003cli\u003eApplications requiring weld-ready bevels and multi-feature cuts\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003eConfigure the Umprotech tube laser to match your workflow and part mix. Choose from base, 3-chuck, or 3-chuck with auto-loader packages, and select your preferred fiber source.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBase package:\u003c\/strong\u003e 2-chuck, 6 kW Raycus or IPG, full enclosure, FSCUT 5000A\/CypTube\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e3-Chuck upgrade:\u003c\/strong\u003e Enhanced support for long, flexible, or heavy tubes\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e3-Chuck + Auto Loader:\u003c\/strong\u003e Bundle auto-loader for unattended bar changes and higher throughput\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBevel cutting head (optional):\u003c\/strong\u003e Weld-ready bevels and countersinks in one pass\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eFiber source:\u003c\/strong\u003e Raycus or IPG at 6 kW\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003eWe partner with US fabricators to ensure a smooth launch—reviewing your parts, materials, and shop layout before installation. Our team helps with pre-install checks (power, floor, material flow), initial programming, and operator training. We can advise on nesting, cutting parameters, and fixturing for your part mix.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003ePre-purchase review of parts and thicknesses to confirm fit\u003c\/li\u003e\n      \u003cli\u003eGuidance on assist gas, fume extraction, and chiller setup\u003c\/li\u003e\n      \u003cli\u003eOn-site or remote training for FSCUT\/CypTube operation\u003c\/li\u003e\n      \u003cli\u003eOngoing support for maintenance, process tuning, and workflow integration\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eNext step: Send us a few sample parts (DXF\/STEP\/PDF) and we’ll confirm fit, cycle time, and configuration for your application.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--seo-link\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCompare 6kW laser cutting machine price\u003c\/h3\u003e\n    \u003cp\u003eFor buyers comparing \u003cstrong\u003e6kW laser cutting machine price\u003c\/strong\u003e, cutting capacity, tube capability, financing, delivery, installation, and training, review the full \u003ca href=\"\/es\/collections\/6kw-fiber-laser-cutting-machines-price-capacity-financing\"\u003e6kW fiber laser cutting machines price and capacity collection\u003c\/a\u003e.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Base","offer_id":52966018548078,"sku":"UTL-6IN-26FT-6KW-ENC-B","price":162900.0,"currency_code":"USD","in_stock":true},{"title":"3-Chuck","offer_id":52966018580846,"sku":"UTL-6IN-26FT-6KW-ENC-3C","price":174900.0,"currency_code":"USD","in_stock":true},{"title":"3-Chuck + Auto Loader","offer_id":52966018613614,"sku":"UTL-6IN-26FT-6KW-ENC-3C-AL","price":194900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-enclosed-tube-laser-6kw-o10in-x-40ft-fscut-tube-cnc-5770431.png?v=1772248625"},{"product_id":"umprotech-enclosed-tube-laser-6kw-8in-x-26ft","title":"Umprotech Enclosed Tube Laser 6kW Ø8in x 26ft FSCUT","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eUmprotech Enclosed Tube Laser – 6kW · Ø8in x 26ft · FSCUT\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003e\n      High-power, fully enclosed tube fiber laser system for US fabricators, job shops, and OEMs needing safe, repeatable, and productive tube cutting. Supports round tubes up to Ø8\" and workpiece lengths to 26 ft, with advanced FSCUT 5000A\/CypTube control for efficient programming and nesting.\n    \u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\n      \u003cstrong\u003eLaser Power:\u003c\/strong\u003e 6 kW  ·  \u003cstrong\u003eTube Capacity:\u003c\/strong\u003e Ø8\"  ·  \u003cstrong\u003eWorkpiece Length:\u003c\/strong\u003e 26 ft (312\")  ·  \u003cstrong\u003eController:\u003c\/strong\u003e FSCUT 5000A \/ CypTube\n    \u003c\/p\u003e\n  \u003c\/header\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e6 kW fiber laser (Raycus or IPG) cuts mild steel, stainless, and aluminum tubes efficiently—even on long stock.\u003c\/li\u003e\n      \u003cli\u003eHandles round tubes up to Ø8\" and workpiece lengths up to 26 ft (312\"), ideal for structural frames, racking, and architectural jobs.\u003c\/li\u003e\n      \u003cli\u003eFull-cover Class 1 enclosure with integrated fume extraction and chiller for operator safety and stable production.\u003c\/li\u003e\n      \u003cli\u003eFSCUT 5000A with CypTube: fast programming, tube geometry libraries, seam finding, and nesting for minimal scrap.\u003c\/li\u003e\n      \u003cli\u003eAuto-centering pneumatic chucks and auto-focus cutting head enable quick changeovers and consistent cut quality across profiles.\u003c\/li\u003e\n      \u003cli\u003eOptional bevel head and bundle auto-loader available for weld-ready prep and higher throughput.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber (Raycus\/IPG options)\u003c\/p\u003e\n        \u003cp\u003eHigh wattage for fast piercing and clean edges on a range of tube materials and wall thicknesses.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eTube capacity (round):\u003c\/strong\u003e up to Ø8\"\u003c\/p\u003e\n        \u003cp\u003eAccommodates large structural members, handrails, and frames for construction and fabrication.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eWorkpiece length:\u003c\/strong\u003e 26 ft (312\")\u003c\/p\u003e\n        \u003cp\u003eSupports long stock for warehouse racking, vehicle chassis, and architectural tubes.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eChucks:\u003c\/strong\u003e Pneumatic, auto-centering\u003c\/p\u003e\n        \u003cp\u003eQuick, repeatable clamping and low runout for multi-side features and fast setups.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Auto-focus\u003c\/p\u003e\n        \u003cp\u003eMaintains optimal focus for consistent kerf and edge quality across varying gauges and profiles.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eControl\/CAM:\u003c\/strong\u003e FSCUT 5000A with CypTube\u003c\/p\u003e\n        \u003cp\u003ePurpose-built for tube processing: geometry libraries, seam finding, bevel compensation, and nesting.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1\u003c\/p\u003e\n        \u003cp\u003eMeets shop-floor safety requirements with interlocked, light-tight design and integrated fume extraction.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eUtilities:\u003c\/strong\u003e Fume extraction \u0026amp; industrial chiller included\u003c\/p\u003e\n        \u003cp\u003eEnsures stable operation and consistent part quality during extended production runs.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003eThis enclosed tube laser is designed as a standalone forming and cutting cell, or as a complement to flatbed lasers and welding lines. Its long stock handling and high output make it a strong fit for US fab shops, contract manufacturers, and OEMs.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eStructural frames, handrails, guardrails, and racking for construction and warehousing\u003c\/li\u003e\n      \u003cli\u003eVehicle chassis, accessories, and machinery frames for OEM and job shop production\u003c\/li\u003e\n      \u003cli\u003eArchitectural tubes and custom profiles for building and design projects\u003c\/li\u003e\n      \u003cli\u003eHVAC round\/rectangular tubes, fitness\/furniture frames, and general metal fabrication\u003c\/li\u003e\n      \u003cli\u003eHigh-mix\/low-volume runs, repeat orders, and prototype work requiring quick changeovers\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003eConfigure your Umprotech tube laser for your workflow and part mix. Multiple packages and options are available to support different production needs.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBase package:\u003c\/strong\u003e 6 kW fiber source (Raycus\/IPG), FSCUT 5000A\/CypTube, auto-centering pneumatic chucks, full enclosure, fume extraction, and chiller.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e3-Chuck configuration:\u003c\/strong\u003e Adds a third chuck for improved handling of long or flexible stock.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e3-Chuck + Auto Loader:\u003c\/strong\u003e Includes bundle auto-loader for unattended bar changes and higher throughput.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBevel cutting head (optional):\u003c\/strong\u003e Enables weld-ready bevels and countersinks in a single pass.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eController options:\u003c\/strong\u003e FSCUT 5000A with CypTube as standard; supports advanced nesting and simulation.\u003c\/li\u003e\n      \u003cli\u003eAvailable with Raycus or IPG fiber laser source at 6 kW to match your budget and service preferences.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003eOur team partners with US fabricators and OEMs to ensure a smooth installation and fast ramp-up. We review your part drawings, material grades, and workflow to confirm the right fit and configuration before purchase.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003ePre-install planning: power, floor space, material flow, safety, and access\u003c\/li\u003e\n      \u003cli\u003eApplication review: confirm tube sizes, wall thicknesses, and profiles for your jobs\u003c\/li\u003e\n      \u003cli\u003eAssistance with programming, nesting, and part sequencing in CypTube\u003c\/li\u003e\n      \u003cli\u003eOperator training and handover for quick, safe production start\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eNext step: Send us your sample parts (DXF\/STEP\/PDF) and we’ll confirm fit, cycle time, and optimal configuration for your shop.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Base","offer_id":52966019629422,"sku":"UTL-8IN-26FT-6KW-ENC-B","price":176900.0,"currency_code":"USD","in_stock":true},{"title":"3-Chuck","offer_id":52966019662190,"sku":"UTL-8IN-26FT-6KW-ENC-3C","price":188900.0,"currency_code":"USD","in_stock":true},{"title":"3-Chuck + Auto Loader","offer_id":52966019694958,"sku":"UTL-8IN-26FT-6KW-ENC-3C-AL","price":208900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-enclosed-tube-laser-6kw-o10in-x-40ft-fscut-tube-cnc-5770431.png?v=1772248625"},{"product_id":"umprotech-enclosed-tube-laser-6kw-10in-x-40ft","title":"Umprotech Enclosed Tube Laser 6kW Ø10in x 40ft | FSCUT Tube CNC","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eUmprotech Enclosed Tube Laser 6kW Ø10in x 40ft with FSCUT Tube Controller\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003ePurpose-built for US fabricators, the Umprotech 6 kW enclosed tube laser delivers high-speed, precision cutting for round tubes up to Ø10\" and lengths up to 40 ft. Designed for job shops, OEMs, and contract manufacturers who need safe, repeatable throughput on long and heavy profiles.\u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\n      \u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW · \u003cstrong\u003eTube capacity:\u003c\/strong\u003e Ø10\" · \u003cstrong\u003eMax length:\u003c\/strong\u003e 40 ft (480\") · \u003cstrong\u003eController:\u003c\/strong\u003e FSCUT 5000A with CypTube\n    \u003c\/p\u003e\n  \u003c\/header\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e6 kW fiber laser (Raycus or IPG) cuts mild steel, stainless, and aluminum tubes with high throughput.\u003c\/li\u003e\n      \u003cli\u003eHandles round tubes up to Ø10\" and workpiece lengths up to 40 ft—ideal for frames, chassis, and structural parts without splicing.\u003c\/li\u003e\n      \u003cli\u003eFull Class 1 safety enclosure with automatic fume extraction for operator safety and compliance.\u003c\/li\u003e\n      \u003cli\u003ePneumatic auto-centering chucks ensure fast changeovers and repeatable concentricity, reducing scrap on long runs.\u003c\/li\u003e\n      \u003cli\u003eFSCUT 5000A controller with CypTube CAM\/CNC—geometry libraries, seam finding, bevel compensation (option), and nesting for efficient material use.\u003c\/li\u003e\n      \u003cli\u003eOptional bevel cutting head and bundle auto-loader to scale up for weld prep and unattended shifts.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber (Raycus\/IPG options)\u003c\/p\u003e\n        \u003cp\u003eHigh power for fast cutting of steel, stainless, and aluminum tubes in a range of wall thicknesses.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eTube capacity (round):\u003c\/strong\u003e up to Ø10\"\u003c\/p\u003e\n        \u003cp\u003eAccommodates large-diameter tubes for frames, racking, and architectural elements.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eWorkpiece length:\u003c\/strong\u003e 40 ft (480\")\u003c\/p\u003e\n        \u003cp\u003eProcesses long beams and profiles in a single piece—no need for mid-part joints or splicing.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eChucks:\u003c\/strong\u003e Pneumatic, auto-centering\u003c\/p\u003e\n        \u003cp\u003eQuick, repeatable clamping for high-mix, low-volume, or serial production.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Auto-focus\u003c\/p\u003e\n        \u003cp\u003eDynamic focus adjustment for consistent kerf and edge quality across varying gauges.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eControl\/CAM:\u003c\/strong\u003e FSCUT 5000A with CypTube\u003c\/p\u003e\n        \u003cp\u003eSupports DXF\/STEP programming, simulation, seam finding, and nesting for remnant reduction.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1\u003c\/p\u003e\n        \u003cp\u003eLight-tight, interlocked enclosure for safe operation in production environments.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eUtilities:\u003c\/strong\u003e Fume extraction \u0026amp; industrial chiller included\u003c\/p\u003e\n        \u003cp\u003eMaintains cut quality and operator safety during extended shifts.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003eThis tube laser is engineered for high-mix, long-length tube processing in standalone cells or as part of an integrated fabrication line. It excels in cutting, profiling, and prepping tubes for welding, assembly, or downstream automation.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eFurniture and fitness frames\u003c\/li\u003e\n      \u003cli\u003eVehicle and trailer chassis\u003c\/li\u003e\n      \u003cli\u003eRacking systems and warehouse structures\u003c\/li\u003e\n      \u003cli\u003eArchitectural tubes, handrails, and guardrails\u003c\/li\u003e\n      \u003cli\u003eHVAC round and rectangular tubes\u003c\/li\u003e\n      \u003cli\u003eMachinery frames and general metal construction\u003c\/li\u003e\n      \u003cli\u003eSuitable for job shops, OEMs, and contract manufacturers needing repeatable, weld-ready tube parts\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003eConfigure the Umprotech tube laser to fit your workflow, part mix, and automation needs. Multiple packages and options are available to support both entry-level and high-throughput operations.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBase package:\u003c\/strong\u003e 6 kW fiber laser, FSCUT 5000A controller, auto-centering pneumatic chucks, Class 1 enclosure, fume extraction, and chiller.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e3-Chuck configuration:\u003c\/strong\u003e Adds a third chuck for enhanced support and accuracy on long or flexible tubes.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e3-Chuck + Auto Loader:\u003c\/strong\u003e Includes bundle auto-loader for unattended bar changes and higher throughput.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBevel cutting head (optional):\u003c\/strong\u003e Enables weld-ready bevels and countersinks in a single pass.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eLaser source options:\u003c\/strong\u003e Raycus or IPG, sized to your budget and service preference.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003eWe work closely with US job shops and OEMs to ensure a smooth transition—reviewing your tube sizes, part drawings, and workflow to confirm fit before purchase. Our team supports you through pre-install planning (power, floor space, safety, and access), installation, and operator training.\u003c\/p\u003e\n    \u003cp\u003eWe help with basic programming (DXF\/STEP import), tooling strategies, and cut parameter setup so your team can hit the ground running. Ongoing support is available for process optimization, maintenance, and advanced features like bevel cutting or automation integration.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003ePre-installation review of parts, material flow, and utilities\u003c\/li\u003e\n      \u003cli\u003eOperator and maintenance training for safe, efficient production\u003c\/li\u003e\n      \u003cli\u003eAssistance with cut programs, nesting, and workflow integration\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eNext step: Send us a few sample tube parts (DXF\/STEP\/PDF) and we’ll confirm fit, cycle time, and the best configuration for your shop.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Base","offer_id":52966020022638,"sku":"UTL-10IN-40FT-6KW-ENC-B","price":224900.0,"currency_code":"USD","in_stock":true},{"title":"3-Chuck","offer_id":52966020055406,"sku":"UTL-10IN-40FT-6KW-ENC-3C","price":236900.0,"currency_code":"USD","in_stock":true},{"title":"3-Chuck + Auto Loader","offer_id":52966020088174,"sku":"UTL-10IN-40FT-6KW-ENC-3C-AL","price":256900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-enclosed-tube-laser-6kw-o10in-x-40ft-fscut-tube-cnc-5770431.png?v=1772248625"},{"product_id":"ipg-fiber-laser-source-yls-6-0kw-cutting","title":"IPG YLS 6kW Laser Source for Cutting","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eIPG Photonics YLS 6.0kW CW Fiber Laser Source for Cutting\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003eEngineered for demanding US fabrication, OEM, and automation applications, the IPG YLS 6.0kW continuous-wave fiber laser source delivers high cutting performance and integration flexibility. Ideal for shops upgrading existing fiber laser systems or building new high-power laser cutting lines.\u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e 6.0kW CW · \u003cstrong\u003eFiber delivery:\u003c\/strong\u003e QBH, 10\/15\/20m · \u003cstrong\u003eCooling:\u003c\/strong\u003e Water-cooled cabinet\u003c\/p\u003e\n  \u003c\/header\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e6.0kW continuous-wave output for fast, high-quality cutting of thick and thin metals\u003c\/li\u003e\n      \u003cli\u003eFlexible QBH fiber delivery (10m, 15m, or 20m) for easy integration with most cutting and welding heads\u003c\/li\u003e\n      \u003cli\u003eIncludes control unit, interlocks, and E-stop loop for safe, standards-compliant operation\u003c\/li\u003e\n      \u003cli\u003eWater-cooled cabinet ensures stable, reliable performance in high-duty-cycle environments\u003c\/li\u003e\n      \u003cli\u003eCompatible as a direct upgrade for Umprotech and other OEM fiber laser systems\u003c\/li\u003e\n      \u003cli\u003eTrusted IPG Photonics build quality and US-based service support\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6.0kW CW\u003c\/p\u003e\n        \u003cp\u003eProvides the capacity for high-speed cutting of a wide range of metals, supporting both thick and thin sheet processing.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eFiber delivery:\u003c\/strong\u003e QBH, 10m \/ 15m \/ 20m options\u003c\/p\u003e\n        \u003cp\u003eChoose the optimal fiber length for your machine layout and automation cell requirements.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCooling:\u003c\/strong\u003e Water-cooled cabinet\u003c\/p\u003e\n        \u003cp\u003eMaintains consistent output and protects laser components during continuous operation.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eIntegration:\u003c\/strong\u003e Includes control unit, interlocks, and E-stop loop\u003c\/p\u003e\n        \u003cp\u003eComprehensive safety and control features for seamless OEM or retrofit integration.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Works with most cutting\/welding heads\u003c\/p\u003e\n        \u003cp\u003eFlexible for new builds or upgrades to existing fiber laser systems, including Umprotech platforms.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003eThis 6.0kW fiber laser source is designed for integration into automated cutting lines, retrofits, and OEM machines, supporting high-mix, high-throughput metal fabrication environments.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eFlat sheet and plate cutting (carbon steel, stainless, aluminum, and more)\u003c\/li\u003e\n      \u003cli\u003eTube and profile cutting systems\u003c\/li\u003e\n      \u003cli\u003eRobotic welding and multi-process automation cells\u003c\/li\u003e\n      \u003cli\u003eProduction of brackets, panels, frames, enclosures, and structural components\u003c\/li\u003e\n      \u003cli\u003eIndustries: metal fabrication, contract manufacturing, machinery, OEM system builds\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003eConfigure the YLS 6.0kW source to match your shop layout and integration needs. Fiber delivery length is selectable at order, with all standard safety and control features included.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003eAvailable fiber delivery lengths: 10m, 15m, or 20m QBH\u003c\/li\u003e\n      \u003cli\u003eStandard: control unit, interlocks, E-stop loop, water-cooled enclosure\u003c\/li\u003e\n      \u003cli\u003eCompatible with a wide range of cutting and welding heads\u003c\/li\u003e\n      \u003cli\u003eDesigned for both new installations and upgrades to existing fiber laser systems\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003eOur team supports US job shops, OEMs, and integrators through every phase—spec review, integration planning, and commissioning. We help confirm electrical, cooling, and safety requirements for smooth installation and long-term reliability.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003ePre-installation review of power, cooling, and safety interlocks\u003c\/li\u003e\n      \u003cli\u003eGuidance on integration with existing automation, cutting, or welding systems\u003c\/li\u003e\n      \u003cli\u003eSupport for commissioning, operator training, and best practices\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eNext step: Contact us with your system specs or integration plans, and we’ll confirm fit, configuration, and support details.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"IPG Photonics","offers":[{"title":"10m","offer_id":52966738887022,"sku":"IPG-YLS-60KW-CW-10M","price":199900.0,"currency_code":"USD","in_stock":true},{"title":"15m","offer_id":52966738919790,"sku":"IPG-YLS-60KW-CW-15M","price":200800.0,"currency_code":"USD","in_stock":true},{"title":"20m","offer_id":52966738952558,"sku":"IPG-YLS-60KW-CW-20M","price":201700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/image_2026-05-24_210750408.png?v=1779682073"},{"product_id":"umprotech-coil-fed-fiber-laser-72in-0-135in-6kw-15t","title":"Umprotech Coil-Fed Fiber Laser 72in x 0.135in, 6kW, 15t Decoiler","description":"\u003csection id=\"umprotech-coil-laser-72x0135-6kw\" class=\"umpro-product\"\u003e\u003c!--\n    INTERNAL ENGINEERING NOTE (NOT FOR PUBLISHING):\n    - All “example” \/ “typical” ranges below must be validated against official Umprotech\n      mechanical, electrical, and performance specs for the 72\" × 0.135\" 6 kW line.\n    - 0.135\" capacity assumes low-carbon steel within a specified tensile-strength band,\n      with proper straightening, tension control, and cutting parameters.\n    - Stainless, HSLA, galvanized, and aluminum require derated thickness and\/or speed;\n      confirm with Umprotech applications engineering per material and duty cycle.\n  --\u003e \u003c!-- HERO \/ OVERVIEW --\u003e\u003cheader class=\"umpro-product__hero\"\u003e\n\u003ch2 class=\"umpro-product__title\"\u003eUmprotech Coil-Fed Fiber Laser – 72 in × 0.135 in, 6 kW, 15 t Decoiler\u003c\/h2\u003e\n\u003cp class=\"umpro-product__subtitle\"\u003eHigh-throughput coil-fed fiber laser cutting line engineered for US job shops, OEMs, and integrators handling large-format blanking from 72\" coil. With a 6 kW fiber laser, 0.135\" carbon steel rating, and integrated 15 t decoiler–leveler–feeder, the system is designed for automated, coil-to-part efficiency where uptime, material utilization, and cut quality directly impact throughput and cost per part.\u003c\/p\u003e\n\u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eCoil width:\u003c\/strong\u003e up to 72 in · \u003cstrong\u003eMax thickness (rating):\u003c\/strong\u003e up to 0.135 in carbon steel* · \u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber · \u003cstrong\u003eDecoiler:\u003c\/strong\u003e 15 t capacity\u003c\/p\u003e\n\u003cp style=\"font-size: 13px; color: #64748b; margin-top: 4px;\"\u003e*0.135\" rating applies to carbon steel within a defined yield-strength and flatness range, at a specified duty cycle. Other alloys and coatings (stainless, HSLA, galvanized, aluminum) require application-specific derating and cut trials.\u003c\/p\u003e\n\u003c\/header\u003e\u003c!-- KEY ADVANTAGES --\u003e\n\u003csection id=\"coil-laser-72x0135-advantages\" class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil-fed automation:\u003c\/strong\u003e Continuous blanking from 15 t coils minimizes manual sheet handling, pallet changes, and staging, enabling extended unattended runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge working width:\u003c\/strong\u003e 72\" coil capacity supports high-yield nesting for panels, enclosures, frames, and structural blanks that fully exploit service-center coil widths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 kW fiber laser:\u003c\/strong\u003e Higher power headroom versus 4 kW platforms helps maintain practical cutting speeds and edge quality up to ≈0.135\" carbon steel (material-dependent).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated straightener \u0026amp; servo feeder:\u003c\/strong\u003e Precision straightener\/leveler and servo feeder with encoder feedback deliver flat, accurately positioned strip to the cutting cell— critical for dimensional stability and downstream forming\/welding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomation-ready configuration:\u003c\/strong\u003e Options for automatic stacking, zone-based part sorting, inline barcode\/etching, and scrap conveyance support coil-in \/ palletized-blanks-out workflows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHMI with nesting \u0026amp; CAD import:\u003c\/strong\u003e Integrated nesting, CAD import, and job queues shorten setup times and simplify high-mix production scheduling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUS-focused implementation:\u003c\/strong\u003e 480 V 3-phase power, US-style safety expectations, and support for local integrators and automation partners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003c!-- CORE TECHNICAL SPECS --\u003e\n\u003csection id=\"coil-laser-72x0135-specs\" class=\"umpro-product__section umpro-product__section--specs\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n\u003cdiv class=\"umpro-product__specs-grid\"\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eCoil width:\u003c\/strong\u003e up to 72 in\u003c\/p\u003e\n\u003cp\u003eAccommodates standard 60–72\" coils for large, high-yield nests. Narrower coils can be run with edge guiding and feed adjustments. Coil edge quality and camber should meet line requirements for optimal performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum thickness (rating):\u003c\/strong\u003e up to 0.135 in carbon steel\u003c\/p\u003e\n\u003cp\u003eTargeted at light- to medium-gauge plate and structural blanks within this range. Actual process window depends on grade (yield strength), coating, flatness, and required edge quality for forming or welding.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber\u003c\/p\u003e\n\u003cp\u003eProvides additional power overhead to maintain practical cutting speeds and quality at 0.105–0.135\" thicknesses, while remaining efficient on thinner gauges. Cut parameter libraries tuned per material and assist gas selection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eLaser head:\u003c\/strong\u003e Autofocus fiber cutting head\u003c\/p\u003e\n\u003cp\u003eCNC-controlled focus position with configurable pierce heights, lead-ins, and multi-level cutting parameters. Collision protection and breakaway features help protect optics from strip up-forms or scrap interference events.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eDecoiler capacity:\u003c\/strong\u003e up to 15 t\u003c\/p\u003e\n\u003cp\u003eSized for heavy coils typical of 0.090–0.135\" stock, maximizing run time between coil changes. Coil ID\/OD and width ranges are matched to your service-center supply standard and mandrel configuration.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eLine components:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCoil car (optional), 15 t decoiler with brake and hold-down, peeler\/threading section, precision straightener\/leveler, servo feeder with encoder feedback, pinch rolls, fiber laser cutting cell, conveyor and scrap removal, optional automatic stacker and sorting modules.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eStraightener\/leveler:\u003c\/strong\u003e multi-roll precision leveler\u003c\/p\u003e\n\u003cp\u003eRoll diameter, spacing, and crown designed for 0.050–0.135\" carbon steel (example window). Provides the flatness required for accurate cutting, stable part geometry, and predictable behavior in subsequent forming processes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eServo feeder:\u003c\/strong\u003e closed-loop servo + encoder\u003c\/p\u003e\n\u003cp\u003eControls feed length and strip position into the cutting area. Properly commissioned, the feeder supports tight length tolerances on blanks and repeatable strip indexing for multi-row nests along the coil direction.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eHMI \u0026amp; software:\u003c\/strong\u003e integrated line control, nesting \u0026amp; CAD import\u003c\/p\u003e\n\u003cp\u003eUnified HMI for decoiler, leveler, feeder, and laser CNC. Includes job queueing, material libraries, part\/kit management, and import of common CAD formats (e.g., DXF) for rapid programming and nesting optimization.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eTraceability \u0026amp; environment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOptions for inline barcode\/etching (text, QR, DataMatrix) and integrated fume extraction \/ filtration. Exhaust and filtration are sized to the duty cycle and typical cut load on 0.090–0.135\" strip.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003ePower \u0026amp; utilities:\u003c\/strong\u003e 480 V 3-phase (standard US industrial)\u003c\/p\u003e\n\u003cp\u003eTotal connected load depends on laser source, chiller, motors, extraction, and automation modules. Compressed air and assist gas requirements (O₂, N₂, air) are defined by your cut recipes and duty cycle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c!-- EXTENDED LINE PARAMETERS (ILLUSTRATIVE) --\u003e\n\u003csection id=\"coil-laser-72x0135-extended\" class=\"umpro-product__section umpro-product__section--specs\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eExtended line parameters (illustrative ranges)\u003c\/h3\u003e\n\u003cp class=\"umpro-product__intro\"\u003eThe ranges below reflect typical values for a 72\" × 0.135\" 6 kW coil-fed fiber laser line and are intended for technical discussion only. Final numbers must be taken from the Umprotech GA drawing, performance spec, and quotation package for the chosen configuration.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__specs-grid umpro-product__specs-grid--extended\"\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eCoil thickness window (example):\u003c\/strong\u003e ≈ 0.050–0.135 in carbon steel\u003c\/p\u003e\n\u003cp\u003eThinner gauges (≈0.050–0.075\") support higher linear cut speeds; the upper range (≈0.120–0.135\") uses more of the 6 kW power envelope and benefits from optimized assist gas and parameter tuning.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eCoil inner\/outer diameter (example):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eID: ≈ 20–24\" · OD: up to ≈ 72\"\u003cbr\u003eActual ranges depend on the selected decoiler mandrel, brake system, and coil car configuration. Coil specs should be aligned between your service center and the Umprotech configuration.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical line speed (no cutting, example):\u003c\/strong\u003e up to ≈ 150–230 ft\/min\u003c\/p\u003e\n\u003cp\u003eMaximum servo feed speed without cutting. Effective production speed is governed by cut parameters, part density in the nest, pierce counts, and non-cut motion (traverses, indexing, start\/stop sequences).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eEffective cutting throughput (conceptual):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suitable part families, coil-fed blanking can provide ≈ 1.5–3× effective throughput vs. equivalent sheet-fed systems by reducing pallet changes, manual loading, and sheet logistics (application- and nest-dependent, not a guaranteed multiplier).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eFeed length accuracy (example):\u003c\/strong\u003e on the order of ±0.004–0.010 in\u003c\/p\u003e\n\u003cp\u003eAchievable feed-to-length accuracy over typical blank lengths given proper installation, tension control, and leveler setup. Final tolerances are defined at commissioning and in the line specification.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eLaser positioning repeatability (example):\u003c\/strong\u003e ≈ ±0.001–0.003 in\u003c\/p\u003e\n\u003cp\u003eTypical for modern 6 kW fiber laser gantry systems. Exact values depend on drive type, encoder resolution, frame design, and calibration routines for the specific cutting machine platform used in the line.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eAssist gas options (typical):\u003c\/strong\u003e O₂, N₂, air (where supported)\u003c\/p\u003e\n\u003cp\u003eO₂ for maximum speed and acceptable oxidized edges on structural parts; N₂ for bright, low-oxidation edges where downstream painting or welding requires cleaner cut surfaces; filtered air (if supported) for cost reduction in certain thickness and quality windows.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eFume extraction (example):\u003c\/strong\u003e zoned under-table extraction\u003c\/p\u003e\n\u003cp\u003eMultiple extraction zones under the cutting region, sequenced with head position. Filtration and duct sizing are designed around typical duty cycle and particulate load on 0.090–0.135\" steel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp style=\"font-size: 13px; color: #64748b; margin-top: 8px;\"\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Use these values to frame engineering conversations. Binding performance and utility requirements must come from the official Umprotech documentation for the configured line.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- PROCESS WINDOW \u0026 PERFORMANCE --\u003e\n\u003csection id=\"coil-laser-72x0135-performance\" class=\"umpro-product__section umpro-product__section--performance\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eCutting performance \u0026amp; process window\u003c\/h3\u003e\n\u003cp\u003eAt 0.135\" carbon steel, a 6 kW fiber laser is working near the upper edge of its thin-sheet sweet spot. Maintaining robust cut quality requires proper process window control: leveling, tension, assist gas, and cut parameter selection.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__formula\"\u003e\n\u003cp\u003e\u003cstrong\u003eSimplified energy balance for continuous cutting:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"font-family: monospace; font-size: 14px; margin: 4px 0 8px;\"\u003eP\u003csub\u003elaser\u003c\/sub\u003e ≈ q × t × v × w\u003csub\u003ekerf\u003c\/sub\u003e × η\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eP\u003csub\u003elaser\u003c\/sub\u003e\u003c\/strong\u003e – available laser power (6 kW nominal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eq\u003c\/strong\u003e – specific energy per unit volume of the sheet material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003et\u003c\/strong\u003e – material thickness (up to 0.135\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ev\u003c\/strong\u003e – cutting speed along the path\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ew\u003csub\u003ekerf\u003c\/sub\u003e\u003c\/strong\u003e – kerf width\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eη\u003c\/strong\u003e – overall process efficiency (optics, coupling, assist gas dynamics)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"font-size: 13px; color: #64748b; margin-top: 4px;\"\u003eFor a fixed power level and material, thicker sections and tighter edge-quality requirements require lower cutting speeds. Umprotech provides tested parameter sets for each material\/thickness combination.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__specs-grid umpro-product__specs-grid--simple-table\"\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__subheading\"\u003ePractical considerations at 0.135\" thickness\u003c\/h4\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003eEdge quality and dross levels are strongly influenced by assist gas choice and nozzle configuration: higher gas pressures and optimized stand-off may be required vs. thinner gauges.\u003c\/li\u003e\n\u003cli\u003eNesting strategies with many small internal features or microtabs can drive cycle time more than linear cut speed; balancing feature density per nest is essential.\u003c\/li\u003e\n\u003cli\u003eResidual coil stress and camber are amplified at thicker gauges; correct leveler setup and strip tension control are critical to prevent movement during cutting.\u003c\/li\u003e\n\u003cli\u003eHigh-duty operation at the upper thickness limit should be evaluated for thermal load on optics, head, and table; maintenance intervals may be adjusted accordingly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__subheading\"\u003eCoil vs. sheet workflow impacts\u003c\/h4\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003eOn 0.090–0.135\" material, sheet weight and handling overhead are substantial; coil-fed lines redistribute this effort into coil change events rather than per-sheet labor.\u003c\/li\u003e\n\u003cli\u003eContinuous strip supports long nests with fewer interruptions, improving effective utilization of both laser power and operator time.\u003c\/li\u003e\n\u003cli\u003eWhen combined with a stacker and zone-based sorting, operators primarily manage coil changes, part quality checks, and downstream flow, rather than manual sheet loading.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c!-- APPLICATIONS --\u003e\n\u003csection id=\"coil-laser-72x0135-applications\" class=\"umpro-product__section umpro-product__section--applications\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n\u003cp\u003eThis Umprotech coil-fed fiber laser line is targeted at high-throughput blanking and panel production in 0.050–0.135\" carbon steel, feeding downstream forming, welding, or assembly operations.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003eBlanking of panels, enclosures, machine bases, and structural components from 72\" coil.\u003c\/li\u003e\n\u003cli\u003eProduction of frames, channels, brackets, and gussets up to ≈0.135\" thick for machinery and structural fabrications.\u003c\/li\u003e\n\u003cli\u003eOEM part families and kits where 0.090–0.135\" strip dominates the workload and consistency is critical.\u003c\/li\u003e\n\u003cli\u003eContract manufacturing cells feeding press brakes, panel benders, robotic welding, or assembly lines.\u003c\/li\u003e\n\u003cli\u003eApplications requiring traceability through inline barcode\/etching keyed to work orders, nests, or serials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003c!-- CONFIGURATIONS \u0026 OPTIONS --\u003e\n\u003csection id=\"coil-laser-72x0135-options\" class=\"umpro-product__section umpro-product__section--options\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech coil-fed fiber laser line can be configured to match your material mix, automation strategy, and integration level. A robust base configuration can be extended with stackers, traceability tools, and data connectivity.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase line:\u003c\/strong\u003e 15 t decoiler with mandrel and hold-down, peeler\/threading section, precision straightener\/leveler, servo feeder, 6 kW fiber laser with autofocus cutting head, conveyor-based scrap\/skeleton removal, and integrated HMI with nesting \u0026amp; CAD import.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomation packages:\u003c\/strong\u003e automatic stacker for palletized blanks; stacker with zone-based sorting for multi-part nests and kit building in mixed-production environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser source options:\u003c\/strong\u003e IPG, MAX, or Raycus fiber sources, selected based on your installed base, service network preferences, and TCO analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInline marking \/ traceability:\u003c\/strong\u003e barcode, QR, or text etching directly on blanks or skeleton for production tracking and quality documentation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFume extraction \u0026amp; filtration:\u003c\/strong\u003e integrated extraction\/fan\/filter packages sized to the duty cycle on 0.090–0.135\" strip and aligned with plant air-quality standards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegration \u0026amp; data:\u003c\/strong\u003e I\/O and data interfaces for upstream coil logistics, downstream forming cells, and higher-level MES\/ERP systems for production reporting and traceability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003c!-- IMPLEMENTATION \u0026 SUPPORT --\u003e\n\u003csection id=\"coil-laser-72x0135-support\" class=\"umpro-product__section umpro-product__section--support\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n\u003cp\u003eUmprotech works with US job shops, OEMs, and integrators to design, install, and ramp coil-fed laser lines with minimal disruption to current production. Because coil-fed systems touch material supply, nesting, automation, and downstream flow, front-loaded engineering is essential.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-install planning:\u003c\/strong\u003e review of power, floor space, foundations (if required), coil handling paths, safety zoning, and adjacency to forming\/welding cells.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil \u0026amp; part review:\u003c\/strong\u003e analysis of your coil specifications (width, thickness range, ID\/OD, grades, coatings) and representative part families to confirm the 0.135\" 6 kW configuration is appropriate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNesting \u0026amp; throughput studies:\u003c\/strong\u003e sample nests and cycle-time modeling to estimate throughput, utilization, and material savings vs. existing sheet-based or turret workflows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommissioning \u0026amp; training:\u003c\/strong\u003e on-site installation, parameter tuning, and training for operators, programmers, and maintenance staff (coil handling, safety, diagnostics, and basic servicing).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifecycle support:\u003c\/strong\u003e remote support (where available), on-site service, process optimization, and assistance as part mixes, materials, and volume profiles change over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNext step: send Umprotech your coil specs (width, thickness range, ID\/OD, grades), representative part drawings (DXF\/STEP\/PDF), and target throughput goals. We’ll validate fit, simulate nests, and propose a configuration and layout aligned with your production and ROI targets.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ENGINEERING FAQ --\u003e\n\u003csection id=\"coil-laser-72x0135-faq\" class=\"umpro-product__section umpro-product__section--engineering\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eEngineering notes \u0026amp; technical FAQ\u003c\/h3\u003e\n\u003ch4 class=\"umpro-product__subheading\"\u003eHow should I interpret the 0.135\" thickness rating?\u003c\/h4\u003e\n\u003cp\u003eThe 0.135\" maximum thickness is a nominal rating for carbon steel at defined mechanical properties and flatness over a specified duty cycle. For engineering decisions:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003eHigher-strength grades or tighter edge-quality requirements will effectively reduce the practical maximum thickness and\/or achievable cut speed.\u003c\/li\u003e\n\u003cli\u003eHeavy zinc coatings, poor coil flatness, or residual stress may require adjustments in leveling and cut parameters to maintain edge quality and dimensional accuracy.\u003c\/li\u003e\n\u003cli\u003eContinuous operation near the top of the thickness range should be analyzed for thermal and mechanical loading on the cutting head, table, and motion system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 class=\"umpro-product__subheading\"\u003eWhat data do you need to properly size and justify this line?\u003c\/h4\u003e\n\u003cp\u003eTo size the line and build an ROI case, Umprotech typically requests:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003eAnnual tonnage by thickness and grade for the 0.050–0.135\" range.\u003c\/li\u003e\n\u003cli\u003eRepresentative part families (geometry, thickness, tolerance, edge-quality requirements).\u003c\/li\u003e\n\u003cli\u003eCurrent process (laser, turret, shear) cycle times, staffing, and material handling flows.\u003c\/li\u003e\n\u003cli\u003eDesired shifts, uptime targets, and growth expectations for the product mix.\u003c\/li\u003e\n\u003cli\u003eLayout constraints and integration goals with forming, welding, and assembly operations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 class=\"umpro-product__subheading\"\u003eHow does coil-fed cutting change my nesting and scrap strategy?\u003c\/h4\u003e\n\u003cp\u003eCoil-fed nesting emphasizes continuous strip usage:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003eNests can be extended along coil length, reducing partial sheet remnants and scrap handling events.\u003c\/li\u003e\n\u003cli\u003eSkeleton handling is continuous rather than per-sheet; scrap choppers or conveyors may be used to manage skeletons and slug removal.\u003c\/li\u003e\n\u003cli\u003eCommon-line cutting and edge-sharing strategies are easier to exploit along continuous strip, but must be balanced with skeleton manageability and part stability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 class=\"umpro-product__subheading\"\u003eWhen does a 72\" × 0.135\", 6 kW coil-fed line make sense?\u003c\/h4\u003e\n\u003cp\u003eIn general, this configuration is a strong fit when:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003eA significant portion of your annual tonnage is in 0.075–0.135\" carbon steel across recurring part families.\u003c\/li\u003e\n\u003cli\u003eMaterial handling and sheet logistics are constraining throughput or consuming high labor content.\u003c\/li\u003e\n\u003cli\u003eYou aim to feed high-throughput forming or welding cells with palletized blanks from coil.\u003c\/li\u003e\n\u003cli\u003eYou require consistent traceability and standardized nests, and you’re ready to shift engineering and planning practices to a coil-centered workflow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Base Line","offer_id":52967292764526,"sku":"UCFL-72W-0135T-6KW-15T-BASE","price":559900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Stacker","offer_id":52967292797294,"sku":"UCFL-72W-0135T-6KW-15T-STK","price":639900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Stacker + Sorting","offer_id":52967292830062,"sku":"UCFL-72W-0135T-6KW-15T-STS","price":739900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-coil-fed-fiber-laser-48in-x-0135in-4kw-10t-7140182.png?v=1772248328"},{"product_id":"umprotech-coil-fed-fiber-laser-72in-0-1in-6kw-15t","title":"Umprotech Coil-Fed Fiber Laser 72in x 0.100in, 6kW, 15t Decoiler","description":"\u003csection class=\"umpro-product\" id=\"umprotech-coil-laser-72x010-6kw\"\u003e\n  \u003c!--\n    INTERNAL ENGINEERING NOTE (NOT FOR PUBLISHING):\n    - All “example” \/ “typical” ranges below must be validated against official Umprotech\n      mechanical, electrical, and performance specs for the 72\" × 0.100\" 6 kW line.\n    - 0.100\" capacity assumes low-carbon steel within a defined yield-strength\/flatness band,\n      with properly configured leveling, tension control, assist gas, and cutting parameters.\n    - Stainless, HSLA, galvanized, and aluminum require derated thickness and\/or speed; confirm\n      per application with Umprotech applications engineering and cut trials.\n  --\u003e\n\n  \u003c!-- HERO \/ OVERVIEW --\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eUmprotech Coil-Fed Fiber Laser – 72 in × 0.100 in, 6 kW, 15 t Decoiler\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003e\n      High-throughput coil-fed fiber laser blanking line engineered for US sheet metal shops and OEMs that need\n      efficient, repeatable coil-to-part production on 72\" strip. With a 6 kW fiber laser, 0.100\" carbon steel\n      rating, and a 15 t decoiler–leveler–feeder section, this system is designed for continuous, highly utilized\n      production where material flow and cut quality directly drive cost per part.\n    \u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\n      \u003cstrong\u003eCoil width:\u003c\/strong\u003e up to 72 in ·\n      \u003cstrong\u003eMax thickness (rating):\u003c\/strong\u003e up to 0.100 in carbon steel* ·\n      \u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber ·\n      \u003cstrong\u003eDecoiler:\u003c\/strong\u003e 15 t capacity\n    \u003c\/p\u003e\n    \u003cp style=\"font-size:13px; color:#64748b; margin-top:4px;\"\u003e\n      *0.100\" rating applies to carbon steel within a specified yield-strength and flatness range at a defined duty cycle.\n      Other alloys and coatings (stainless, HSLA, galvanized, aluminum) require application-specific derating and validation.\n    \u003c\/p\u003e\n  \u003c\/header\u003e\n\n  \u003c!-- KEY ADVANTAGES --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\" id=\"coil-laser-72x010-6kw-advantages\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eCoil-to-part automation at 72\":\u003c\/strong\u003e Continuous blanking from 15 t coils reduces manual sheet loading,\n        pallet changes, and staging—especially valuable for recurring OEM jobs and kit production.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003e6 kW fiber power with 0.100\" rating:\u003c\/strong\u003e Extra power headroom versus 4 kW platforms helps sustain\n        practical cutting speeds and edge quality across the 0.050–0.100\" range (material-dependent).\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFull 72\" coil width:\u003c\/strong\u003e Exploits service-center 60–72\" coil supply for large panels, enclosures,\n        and multi-row nests, improving material utilization over narrower formats.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegrated 15 t decoiler, straightener\/leveler, and servo feeder:\u003c\/strong\u003e Ensures flat, accurately fed\n        strip into the cutting cell—critical for dimensional accuracy, edge quality, and downstream forming\/welding.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eScalable automation:\u003c\/strong\u003e Start with a base line or add automatic stacker and zone-based sorting to\n        move toward coil-in \/ palletized-blanks-out workflows with minimal operator intervention.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eNesting-driven workflow:\u003c\/strong\u003e HMI with nesting and CAD import supports high-mix production, kit\n        building, and fast changeovers using standard DXF or similar CAD files.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFlexible laser sourcing:\u003c\/strong\u003e Support for IPG, MAX, or Raycus fiber sources to align with your\n        preferred supply chain, service network, and total cost-of-ownership strategy.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- CORE TECHNICAL SPECS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\" id=\"coil-laser-72x010-6kw-specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eMaximum coil width:\u003c\/strong\u003e up to 72 in\u003c\/p\u003e\n        \u003cp\u003e\n          Supports 60–72\" coils common in US supply. Enables large blanks, multi-panel nests, and efficient material\n          utilization on wide-format strip.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eMaximum thickness (rating):\u003c\/strong\u003e up to 0.100 in carbon steel\u003c\/p\u003e\n        \u003cp\u003e\n          Targeted at light- to medium-gauge blanking. Actual process window depends on grade, coating, flatness, and\n          required edge quality for forming or welding operations.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber laser\u003c\/p\u003e\n        \u003cp\u003e\n          Balances cut speed and quality across ≈0.040–0.100\" carbon steel. Provides more power headroom versus 4 kW\n          systems for higher-density nests and thicker jobs without oversizing to heavy-plate levels.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser head:\u003c\/strong\u003e Autofocus fiber cutting head\u003c\/p\u003e\n        \u003cp\u003e\n          CNC-controlled focus with programmable pierce heights, lead-ins, and cut parameter sets. Collision protection\n          and breakaway design help safeguard optics in the event of strip up-forms or skeleton contact.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eDecoiler capacity:\u003c\/strong\u003e up to 15 t\u003c\/p\u003e\n        \u003cp\u003e\n          Sized for heavier coils at 0.060–0.100\" thickness, maximizing runtime between coil changes. Coil ID\/OD and\n          width ranges are matched to your service-center standards and mandrel configuration.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLine components:\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp\u003e\n          Coil car (optional), 15 t decoiler with brake and hold-down, peeler\/threading section, precision\n          straightener\/leveler, servo feeder with encoder feedback, pinch rolls, 6 kW fiber laser cutting cell,\n          conveyor-based scrap\/skeleton removal, optional automatic stacker and sorting modules.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eStraightener\/leveler:\u003c\/strong\u003e multi-roll precision leveler\u003c\/p\u003e\n        \u003cp\u003e\n          Roll diameter and spacing tuned for the target thickness window (example: ≈0.040–0.100\" carbon steel), helping\n          remove coil set and crossbow for stable cutting and predictable behavior during forming.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eServo feeder:\u003c\/strong\u003e closed-loop servo + encoder\u003c\/p\u003e\n        \u003cp\u003e\n          Controls feed length and strip position into the cutting zone. Supports accurate blank lengths and repeatable\n          strip indexing for continuous nests along the coil direction and multi-row layouts.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eAutomation \u0026amp; scrap handling:\u003c\/strong\u003e conveyor-based skeleton\/slug removal\u003c\/p\u003e\n        \u003cp\u003e\n          Integrated scrap conveyors, chutes, or bins (configuration-dependent) manage skeleton and small-part removal\n          to support continuous operation and reduce manual scrap handling effort.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eControl \u0026amp; programming:\u003c\/strong\u003e HMI with nesting \u0026amp; CAD import\u003c\/p\u003e\n        \u003cp\u003e\n          Unified HMI for coil handling and cutting. Job queues, material libraries, and DXF (or similar) import\n          streamline setup, nesting, and production scheduling for high-mix environments.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eEnvironment \u0026amp; safety:\u003c\/strong\u003e fume extraction \u0026amp; guarding (configuration-dependent)\u003c\/p\u003e\n        \u003cp\u003e\n          Optional fume extraction packages sized for the duty cycle and material mix, along with guarding and safety\n          circuits designed to meet common US industrial safety practices.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- EXTENDED LINE PARAMETERS (ILLUSTRATIVE) --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\" id=\"coil-laser-72x010-6kw-extended\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eExtended line parameters (illustrative ranges)\u003c\/h3\u003e\n    \u003cp class=\"umpro-product__intro\"\u003e\n      The ranges below reflect typical values for a 72\" × 0.100\" coil-fed 6 kW fiber laser line and are intended\n      for technical discussion only. Final values must come from the official Umprotech GA drawing, electrical\n      one-line, and performance specification for your configured system.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__specs-grid umpro-product__specs-grid--extended\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCoil thickness window (example):\u003c\/strong\u003e ≈ 0.040–0.100 in carbon steel\u003c\/p\u003e\n        \u003cp\u003e\n          Thinner gauges (≈0.040–0.060\") support higher linear cut speeds; upper end (≈0.090–0.100\") leverages\n          the additional 6 kW power headroom to maintain workable throughput and edge quality.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCoil inner\/outer diameter (example):\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp\u003e\n          ID: ≈ 20–24\" · OD: up to ≈ 72\"\u003cbr\u003e\n          Exact ranges depend on decoiler mandrel design, brake system, and coil car configuration, and must be\n          confirmed against your coil supply standard at the proposal stage.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eMechanical line speed (no cutting, example):\u003c\/strong\u003e up to ≈ 180–250 ft\/min\u003c\/p\u003e\n        \u003cp\u003e\n          Maximum feed rate without cutting. Practical production speed is governed by cutting parameters, nest density,\n          pierce counts, and non-cut motion (rapid traverses, indexing, start\/stop cycles).\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eEffective cutting throughput (conceptual):\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp\u003e\n          For suitable part families, coil-fed blanking can deliver ≈1.5–3× effective throughput vs. comparable sheet-fed\n          systems by reducing pallet changes, manual sheet handling, and partial-sheet remnants (application-dependent).\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eFeed length accuracy (example):\u003c\/strong\u003e on the order of ±0.004–0.008 in\u003c\/p\u003e\n        \u003cp\u003e\n          Achievable feed-to-length accuracy over typical blank lengths with proper installation, tensioning, and\n          leveler setup. Final tolerances are defined at commissioning and documented in the line spec.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser positioning repeatability (example):\u003c\/strong\u003e ≈ ±0.001–0.003 in\u003c\/p\u003e\n        \u003cp\u003e\n          Typical for modern 6 kW fiber laser motion systems. Actual figures depend on drive type, encoder resolution,\n          frame stiffness, and calibration procedures for the specific cutting platform used in the line.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eAssist gas options (typical):\u003c\/strong\u003e O₂, N₂, air (where supported)\u003c\/p\u003e\n        \u003cp\u003e\n          O₂ for high-speed cutting with oxidized edge on non-cosmetic\/structural parts; N₂ for bright, low-oxidation\n          edges where painting or welding demands cleaner cut faces; filtered air (if supported) to reduce gas cost\n          on certain thickness\/quality combinations.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eFume extraction (example):\u003c\/strong\u003e zoned under-table extraction\u003c\/p\u003e\n        \u003cp\u003e\n          Multiple extraction zones under the cutting region, synchronized with head position. Filtration capacity and\n          duct sizing are specified for expected duty cycle and particulate load on 0.040–0.100\" material.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cp style=\"font-size:13px; color:#64748b; margin-top:8px;\"\u003e\n      \u003cstrong\u003eImportant:\u003c\/strong\u003e Use these ranges to structure engineering and ROI discussions. Binding performance,\n      utility, and tolerance data must come from signed Umprotech documentation for the final configuration.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- PROCESS WINDOW \u0026 PERFORMANCE --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--performance\" id=\"coil-laser-72x010-6kw-performance\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCutting performance \u0026amp; process window\u003c\/h3\u003e\n    \u003cp\u003e\n      At 0.100\" carbon steel, a 6 kW fiber laser has meaningful power overhead for stable, high-quality cutting in\n      continuous strip. However, true throughput still depends on part geometry, nesting strategy, and process setup.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__formula\"\u003e\n      \u003cp\u003e\u003cstrong\u003eSimplified energy relationship for continuous cutting:\u003c\/strong\u003e\u003c\/p\u003e\n      \u003cp style=\"font-family:monospace; font-size:14px; margin:4px 0 8px;\"\u003e\n        P\u003csub\u003elaser\u003c\/sub\u003e ≈ q × t × v × w\u003csub\u003ekerf\u003c\/sub\u003e × η\n      \u003c\/p\u003e\n      \u003cul class=\"umpro-product__list\"\u003e\n        \u003cli\u003e\n\u003cstrong\u003eP\u003csub\u003elaser\u003c\/sub\u003e\u003c\/strong\u003e – available laser power (6 kW nominal)\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eq\u003c\/strong\u003e – specific energy per unit volume of the material\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003et\u003c\/strong\u003e – material thickness (up to 0.100\")\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003ev\u003c\/strong\u003e – cutting speed along the path\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003ew\u003csub\u003ekerf\u003c\/sub\u003e\u003c\/strong\u003e – kerf width\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eη\u003c\/strong\u003e – overall process efficiency (optics, absorption, assist gas dynamics)\u003c\/li\u003e\n      \u003c\/ul\u003e\n      \u003cp style=\"font-size:13px; color:#64748b; margin-top:4px;\"\u003e\n        For a given material and kerf, increasing thickness or demanding tighter edge quality consumes more energy per\n        unit length and reduces the maximum achievable cutting speed. Umprotech supplies validated cut parameter tables\n        for each material\/thickness combination.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"umpro-product__specs-grid umpro-product__specs-grid--simple-table\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__subheading\"\u003ePractical considerations at up to 0.100\"\u003c\/h4\u003e\n        \u003cul class=\"umpro-product__list\"\u003e\n          \u003cli\u003e\n            Compared with 0.060\" work, speeds at 0.100\" are lower, but the coil-fed workflow gains productivity\n            through reduced handling and fewer interruptions for sheet changes.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            Edge quality, dross, and cut-face geometry are highly sensitive to assist gas selection and nozzle parameters;\n            O₂ vs N₂ strategies are chosen based on downstream requirements.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            Dense nests with many internal features can be cycle-time-limited by piercing and rapid motion, not just\n            linear cut speed—nest design has a major impact on real throughput.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            Leveler setup must address coil memory and crossbow at the thicker end of the range to prevent strip\n            movement or edge lift under the cutting head.\n          \u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__subheading\"\u003eCoil vs. sheet workflow impact\u003c\/h4\u003e\n        \u003cul class=\"umpro-product__list\"\u003e\n          \u003cli\u003e\n            Coil-fed blanking shifts labor away from frequent sheet\/pallet changes toward less frequent coil changes,\n            particularly impactful at 72\" width where sheet weight is high.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            Continuous strip allows nests to be repeated along coil length, enabling higher utilization and fewer\n            partial-sheet leftovers vs. conventional sheet-fed systems.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            With automatic stacking and sorting, operators focus on coil changes, QC checks, and downstream flow\n            instead of raw sheet logistics, improving labor productivity.\n          \u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- APPLICATIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\" id=\"coil-laser-72x010-6kw-applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 72\" × 0.100\" coil-fed 6 kW fiber laser line is aimed at high-throughput blanking and panel\n      production from wide carbon steel coil, feeding downstream forming and welding operations.\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eBlanking of large panels, enclosures, doors, and cabinets from 72\" coil.\u003c\/li\u003e\n      \u003cli\u003eProduction of brackets, channels, stiffeners, and structural details up to ≈0.100\" thick.\u003c\/li\u003e\n      \u003cli\u003eHVAC panels, appliance components, and machinery covers where 0.060–0.100\" steel is standard.\u003c\/li\u003e\n      \u003cli\u003eOEM and contract manufacturing cells feeding press brakes, panel benders, roll formers, or weld cells.\u003c\/li\u003e\n      \u003cli\u003eApplications requiring repeatable nests and traceability via inline barcode\/etching on each blank or kit.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- CONFIGURATIONS \u0026 OPTIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--options\" id=\"coil-laser-72x010-6kw-options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003e\n      Configure the Umprotech coil-fed fiber laser line to match your throughput goals, automation strategy,\n      and integration level. A robust base configuration can be expanded with stacking, sorting, traceability,\n      and data connectivity.\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eBase line:\u003c\/strong\u003e 15 t decoiler with mandrel and brake, peeler\/threading section, precision\n        straightener\/leveler, servo feeder, 6 kW fiber laser with autofocus head, conveyor scrap\/skeleton removal,\n        and HMI with nesting and CAD import.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAutomatic stacker:\u003c\/strong\u003e Pallet-based blank stacking for reduced manual handling and predictable\n        staging of parts for downstream cells.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto stacker + sorting:\u003c\/strong\u003e Zone-based part sorting to multiple pallets for mixed nests, kit\n        building, or routing to different forming\/welding cells.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eLaser source options:\u003c\/strong\u003e IPG, MAX, or Raycus fiber sources, selected to align with your installed\n        base, service preferences, and TCO targets.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eInline barcode\/etching:\u003c\/strong\u003e Mark blanks or skeletons with barcodes, QR codes, or text IDs for\n        integration with MES\/ERP and quality documentation.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFume extraction package:\u003c\/strong\u003e Integrated extraction\/filtration sized for the duty cycle and\n        material mix processed on the line.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAutomation \u0026amp; data integration:\u003c\/strong\u003e I\/O and data interfaces to upstream coil logistics,\n        downstream forming\/welding cells, and plant-level data systems.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- IMPLEMENTATION \u0026 SUPPORT --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--support\" id=\"coil-laser-72x010-6kw-support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003e\n      Umprotech works with US sheet metal shops, OEMs, and system integrators to plan, install, and ramp coil-fed\n      laser lines with minimal disruption. Because coil-fed systems affect material supply, nesting strategy, and\n      downstream flow, early engineering engagement is critical.\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePre-install planning:\u003c\/strong\u003e review of power, floor space, foundations (if needed), coil storage\/\n        handling, access routes, and safety zoning for the line.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eCoil \u0026amp; part review:\u003c\/strong\u003e analysis of your coil specs (width, thickness range, ID\/OD, grades,\n        coatings) and representative part families to confirm suitability of the 72\" × 0.100\" 6 kW configuration.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eNesting \u0026amp; throughput studies:\u003c\/strong\u003e representative nests and cycle-time modeling to estimate\n        throughput, utilization, and material savings vs. current sheet-fed or turret workflows.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eCommissioning \u0026amp; training:\u003c\/strong\u003e on-site installation, parameter tuning, and training for\n        operators, programmers, and maintenance personnel (coil handling, safety, diagnostics, basic servicing).\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eLifecycle support:\u003c\/strong\u003e remote support (where available), on-site service, and process optimization\n        as volumes, materials, and part mixes evolve.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003e\n      Next step: send Umprotech your coil specifications (width, thickness range, ID\/OD, grades) and representative\n      part drawings (DXF\/STEP\/PDF). We’ll validate fit, estimate cycle times, and propose a configuration and layout\n      aligned with your throughput, labor, and ROI targets.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- ENGINEERING FAQ --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--engineering\" id=\"coil-laser-72x010-6kw-faq\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eEngineering notes \u0026amp; technical FAQ\u003c\/h3\u003e\n\n    \u003ch4 class=\"umpro-product__subheading\"\u003eHow should I interpret the 0.100\" thickness rating with a 6 kW laser?\u003c\/h4\u003e\n    \u003cp\u003e\n      The 0.100\" maximum thickness is a nominal rating for carbon steel at specified mechanical properties, flatness,\n      and duty cycle. For practical engineering decisions:\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        Higher-strength grades, heavy coatings, or challenging edge-quality requirements will effectively reduce the\n        usable thickness and\/or cutting speed at a given power level.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        Continuous production at 0.100\" should be reviewed in terms of thermal load on optics, cutting head, and table,\n        along with maintenance intervals and consumable life.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        Light-gauge work (≈0.040–0.060\") will typically be limited by motion and piercing dynamics rather than available\n        power, so nest design and path optimization dominate cycle time.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003ch4 class=\"umpro-product__subheading\"\u003eWhat data is needed to size and justify this coil-fed line?\u003c\/h4\u003e\n    \u003cp\u003e\n      To properly configure and justify a 72\" × 0.100\" 6 kW coil-fed line, Umprotech will typically request:\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eAnnual tonnage by thickness and grade for the 0.040–0.100\" range on 72\" coil.\u003c\/li\u003e\n      \u003cli\u003eRepresentative part families (geometry, thickness, tolerances, edge-quality requirements).\u003c\/li\u003e\n      \u003cli\u003eCurrent cutting processes (laser, turret, shear), cycle times, staffing, and handling flows.\u003c\/li\u003e\n      \u003cli\u003eTarget throughput, OEE, and labor reduction goals with the new line.\u003c\/li\u003e\n      \u003cli\u003eLayout constraints and integration objectives with forming, welding, and assembly operations.\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003ch4 class=\"umpro-product__subheading\"\u003eHow does coil-fed cutting change nesting and scrap strategy?\u003c\/h4\u003e\n    \u003cp\u003e\n      Coil-based nesting differs from sheet-based nesting in several important ways:\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        Nests can be defined as repeating patterns along the strip, reducing partial-sheet remnants and improving\n        long-term utilization on recurring part families.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        Skeleton handling becomes continuous rather than per-sheet; scrap conveyors and choppers may be used to\n        manage skeleton and slug removal.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        Common-line cutting and edge sharing along coil direction are easier to exploit, but must be balanced with\n        skeleton stability and part retention until stacking.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003ch4 class=\"umpro-product__subheading\"\u003eWhen does a 72\" × 0.100\", 6 kW coil-fed line make sense?\u003c\/h4\u003e\n    \u003cp\u003e\n      In general, this configuration is a strong fit when:\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        A significant share of your tonnage is 0.040–0.100\" carbon steel on 60–72\" coil, with recurring part families\n        and relatively stable demand.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        Material handling and sheet logistics are constraining throughput or consuming high labor content, especially\n        on wide sheets.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        You aim for coil-in \/ palletized-blanks-out cells feeding press brakes, panel benders, or welding lines.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        You require better traceability and standardized nests and are ready to adjust engineering and planning to a\n        coil-centered workflow.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e\n","brand":"Umprotech","offers":[{"title":"Base Line","offer_id":52967292928366,"sku":"UCFL-72W-01T-6KW-15T-BASE","price":529900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Stacker","offer_id":52967292961134,"sku":"UCFL-72W-01T-6KW-15T-STK","price":609900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Stacker + Sorting","offer_id":52967292993902,"sku":"UCFL-72W-01T-6KW-15T-STS","price":709900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-coil-fed-fiber-laser-48in-x-0135in-4kw-10t-7140182.png?v=1772248328"},{"product_id":"umprotech-coil-fed-fiber-laser-72in-0-06in-6kw-10t","title":"Umprotech Coil-Fed Fiber Laser 72in x 0.060in, 6kW, 10t Decoiler","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eUmprotech Coil-Fed Fiber Laser · 72 in x 0.060 in · 6kW · 10t Decoiler\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003eEngineered for high-throughput sheet blanking directly from coil, this Umprotech line integrates a 10t decoiler, precision straightener, servo feeder, and a 6kW fiber laser. Designed for US job shops, OEMs, and fabrication cells needing reliable coil-to-part automation for carbon steel up to 0.060 in.\u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e 72 in · \u003cstrong\u003eMax thickness:\u003c\/strong\u003e 0.060 in (carbon steel) · \u003cstrong\u003eLaser power:\u003c\/strong\u003e 6kW · \u003cstrong\u003eDecoiler:\u003c\/strong\u003e 10t\u003c\/p\u003e\n  \u003c\/header\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003eFull coil-to-part automation: 10t decoiler, straightener\/leveler, and servo feeder streamline blanking from coil stock.\u003c\/li\u003e\n      \u003cli\u003e72 in working width accommodates large panels, blanks, or nested part layouts for maximum material yield.\u003c\/li\u003e\n      \u003cli\u003e6kW fiber laser with autofocus head delivers fast, high-quality cutting in carbon steel up to 0.060 in (material dependent).\u003c\/li\u003e\n      \u003cli\u003eIntegrated HMI with nesting and CAD import simplifies programming and job changeovers.\u003c\/li\u003e\n      \u003cli\u003eOptional auto stacker and part sorting support high-volume, unmanned production shifts.\u003c\/li\u003e\n      \u003cli\u003eFlexible laser source options (IPG, MAX, Raycus) and inline barcode\/etching for traceability.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCoil width:\u003c\/strong\u003e 72 in\u003c\/p\u003e\n        \u003cp\u003eHandles wide coil stock for large-format blanks or high-density nesting.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eMax thickness:\u003c\/strong\u003e 0.060 in (carbon steel, material dependent)\u003c\/p\u003e\n        \u003cp\u003eSuitable for HVAC, enclosure, and general fabrication thicknesses.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6kW fiber laser\u003c\/p\u003e\n        \u003cp\u003eHigh-speed cutting for carbon steel and other compatible materials.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eDecoiler capacity:\u003c\/strong\u003e 10t\u003c\/p\u003e\n        \u003cp\u003eSupports large coil weights for extended production runs and fewer changeovers.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eAutomation:\u003c\/strong\u003e Precision straightener\/leveler, servo feeder, conveyor scrap removal\u003c\/p\u003e\n        \u003cp\u003eEnsures flat, accurately fed material and efficient scrap handling.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e HMI with nesting\/CAD import\u003c\/p\u003e\n        \u003cp\u003eStreamlines programming, nesting, and job management directly at the line.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003eThis coil-fed fiber laser line is ideal as a dedicated blanking cell or as part of an automated fabrication workflow, complementing press brakes, turret punches, or robotic welding cells.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eBlank production for HVAC panels, appliance enclosures, and electrical cabinets\u003c\/li\u003e\n      \u003cli\u003eHigh-volume part nesting for contract manufacturing and OEM supply\u003c\/li\u003e\n      \u003cli\u003eContinuous coil-to-part flow for improved material yield and reduced handling\u003c\/li\u003e\n      \u003cli\u003eIntegration with downstream forming, bending, or welding operations\u003c\/li\u003e\n      \u003cli\u003eTraceable part marking for batch and order management\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003eConfigure the Umprotech coil-fed fiber laser line to match your automation, stacking, and traceability needs.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003eBase line: 10t decoiler, straightener\/leveler, servo feeder, 6kW fiber laser, conveyor scrap removal\u003c\/li\u003e\n      \u003cli\u003eAutomation packages: add auto stacker or auto stacker with zone-based part sorting\u003c\/li\u003e\n      \u003cli\u003eLaser source options: IPG, MAX, or Raycus fiber laser sources\u003c\/li\u003e\n      \u003cli\u003eInline barcode\/etching for part identification and traceability\u003c\/li\u003e\n      \u003cli\u003eFume extraction package for compliance and operator safety\u003c\/li\u003e\n      \u003cli\u003eCustom integration with downstream forming or material handling systems\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003eWe partner with US job shops and OEMs to ensure a smooth transition to coil-fed automation. Our team can review your parts, material types, and thicknesses to confirm fit and recommend the right automation configuration.\u003c\/p\u003e\n    \u003cp\u003eWe support pre-install planning (power, floor layout, safety), provide training on nesting and operation, and help your team ramp up quickly for high-mix or repeat production.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eApplication review and sample part evaluation before purchase\u003c\/li\u003e\n      \u003cli\u003eCommissioning, training, and ongoing technical support\u003c\/li\u003e\n      \u003cli\u003eAssistance with nesting, CAD import, and production setup\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eNext step: Send us your sample part files or production requirements, and we’ll confirm fit, cycle time, and recommend the best configuration for your workflow.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Base Line","offer_id":52967293059438,"sku":"UCFL-72W-006T-6KW-10T-BASE","price":477900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Stacker","offer_id":52967293092206,"sku":"UCFL-72W-006T-6KW-10T-STK","price":557900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Stacker + Sorting","offer_id":52967293124974,"sku":"UCFL-72W-006T-6KW-10T-STS","price":657900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-coil-fed-fiber-laser-48in-x-0135in-4kw-10t-7140182.jpg?v=1779687958"},{"product_id":"umprotech-coil-fed-fiber-laser-60in-0-06in-6kw-10t","title":"Umprotech Coil-Fed Fiber Laser, 60in x 0.060in, 6kW, 10t Decoiler","description":"\u003csection class=\"umpro-product\" id=\"umprotech-coil-laser-60x0060-6kw\"\u003e\n  \u003c!--\n    INTERNAL ENGINEERING NOTE (NOT FOR PUBLISHING):\n    - All “example” \/ “typical” ranges below must be validated against official Umprotech\n      mechanical, electrical, and performance specs for the 60\" × 0.060\" 6 kW line.\n    - 0.060\" capacity assumes low-carbon steel within a defined yield-strength\/flatness band,\n      with correctly configured leveling, tension control, assist gas, and cutting parameters.\n    - Stainless, HSLA, galvanized, and aluminum require derated thickness and\/or speed; confirm\n      per application with Umprotech applications engineering and cut trials.\n  --\u003e\n\n  \u003c!-- HERO \/ OVERVIEW --\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eUmprotech Coil-Fed Fiber Laser – 60 in × 0.060 in, 6 kW, 10 t Decoiler\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003e\n      Automated 60\" coil-fed fiber laser cutting line for high-throughput sheet blanking and coil-to-part production.\n      Engineered for US job shops, OEMs, and fabrication cells that run thin-gauge carbon steel from coil and want\n      to minimize manual sheet handling while maximizing productivity, consistency, and material utilization.\n    \u003c\/p\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003e\n      The line combines a 10 t decoiler, precision straightener\/leveler, servo feeder, and 6 kW fiber laser into a\n      single integrated system—optimized for fast, repeatable cutting on material up to 0.060\" thick, feeding\n      press brakes, panel benders, and welding cells with stable, dimensionally consistent blanks.\n    \u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\n      \u003cstrong\u003eCoil width:\u003c\/strong\u003e up to 60 in ·\n      \u003cstrong\u003eMax thickness (rating):\u003c\/strong\u003e up to 0.060 in carbon steel* ·\n      \u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber ·\n      \u003cstrong\u003eDecoiler:\u003c\/strong\u003e 10 t capacity\n    \u003c\/p\u003e\n    \u003cp style=\"font-size:13px; color:#64748b; margin-top:4px;\"\u003e\n      *0.060\" rating applies to carbon steel within a specified yield-strength and flatness range at a defined duty cycle.\n      Other alloys and coatings (stainless, HSLA, galvanized, aluminum) require application-specific derating and validation.\n    \u003c\/p\u003e\n  \u003c\/header\u003e\n\n  \u003c!-- KEY ADVANTAGES --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\" id=\"coil-laser-60x0060-advantages\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eThin-gauge productivity:\u003c\/strong\u003e 6 kW fiber power on 0.024–0.060\" material enables very high linear\n        cut speeds; the coil-fed architecture converts that speed into real throughput by eliminating most sheet\n        loading and pallet exchanges.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003e60\" coil optimization:\u003c\/strong\u003e Designed around common 48–60\" coil widths used in HVAC, appliance, and\n        enclosure production—large enough for multi-row nests but more compact than 72\" systems in floor-space and coil handling.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003e10 t decoiler with precision straightener\/leveler:\u003c\/strong\u003e Maintains controlled tension and flatness\n        at thin gauges, which is critical for dimensional accuracy, cut quality, and downstream forming performance.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eServo-driven feed accuracy:\u003c\/strong\u003e Closed-loop servo feeder with encoder feedback achieves consistent\n        feed length and strip positioning, supporting tight nest tolerances and repeatable blank lengths.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegrated scrap handling:\u003c\/strong\u003e Conveyor-based skeleton and scrap management reduces manual scrap\n        removal and supports continuous coil-to-part operation.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eNesting \u0026amp; CAD-driven workflows:\u003c\/strong\u003e HMI with integrated nesting and CAD import simplifies\n        programming, supports high-mix production, and improves material utilization across thin-gauge part families.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eScalable automation:\u003c\/strong\u003e Optional automatic stacker and zone-based sorting allow progression from\n        semi-automatic coil-fed blanking to near lights-out production on the right part mix.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- CORE TECHNICAL SPECS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\" id=\"coil-laser-60x0060-specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCoil width:\u003c\/strong\u003e up to 60 in\u003c\/p\u003e\n        \u003cp\u003e\n          Processes 48–60\" coil stock commonly supplied in US markets. Supports multi-row nests for panels, brackets,\n          and complex profiles while keeping coil weight and handling manageable compared to 72\" systems.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eMax thickness (rating):\u003c\/strong\u003e up to 0.060 in carbon steel\u003c\/p\u003e\n        \u003cp\u003e\n          Targeted at thin-gauge applications such as HVAC, appliance panels, and enclosure parts. Actual process window\n          depends on steel grade, coating, flatness, and required edge quality for downstream bending or welding.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber laser\u003c\/p\u003e\n        \u003cp\u003e\n          Provides substantial power overhead in the 0.024–0.060\" range, making the process motion- and piercing-limited\n          rather than power-limited for many nests. Supports high acceleration and fast repositioning between cuts.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser cutting head:\u003c\/strong\u003e Autofocus fiber head\u003c\/p\u003e\n        \u003cp\u003e\n          CNC-controlled focus adjustment with programmable pierce heights, lead-ins, and cut parameter sets. Head\n          includes collision protection and breakaway design to protect optics in the event of strip up-forms or skeleton contact.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eDecoiler capacity:\u003c\/strong\u003e up to 10 t\u003c\/p\u003e\n        \u003cp\u003e\n          Sized for typical coil weights at 0.024–0.060\" thickness. Balanced between runtime (fewer coil changes) and\n          more accessible handling compared with very large coil stations in heavy-gauge lines.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLine components:\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp\u003e\n          Coil car (optional), 10 t decoiler with brake and hold-down, peeler\/threading section, precision\n          straightener\/leveler, servo feeder with encoder feedback, pinch rolls, 6 kW fiber laser cutting cell,\n          conveyor-based scrap\/skeleton removal, optional automatic stacker and sorting modules, integrated HMI with nesting.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eStraightener\/leveler:\u003c\/strong\u003e multi-roll precision leveler\u003c\/p\u003e\n        \u003cp\u003e\n          Roll diameter and spacing tuned to thin-gauge strip (example: ≈0.020–0.060\" carbon steel). Correct leveling\n          reduces coil memory, crossbow, and waviness, improving stability under the cutting head and behavior during forming.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eServo feeder:\u003c\/strong\u003e closed-loop servo + encoder\u003c\/p\u003e\n        \u003cp\u003e\n          Controls feed length and strip position into the cutting zone. Supports accurate blank length control and\n          repeatable indexing along the coil direction to maintain nest geometry over extended runs.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eAutomation \u0026amp; scrap removal:\u003c\/strong\u003e conveyor-based skeleton\/slug handling\u003c\/p\u003e\n        \u003cp\u003e\n          Scrap conveyors, chutes, and bins (configuration-dependent) keep skeletons and slugs moving away from the\n          cutting zone, supporting continuous operation and reducing manual scrap handling.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eControl \u0026amp; programming:\u003c\/strong\u003e HMI with nesting \u0026amp; CAD import\u003c\/p\u003e\n        \u003cp\u003e\n          Unified interface for coil handling and laser cutting. Includes job queues, material\/thickness libraries,\n          and DXF (or similar) import for nesting and job preparation in high-mix environments.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e automation \u0026amp; environment\u003c\/p\u003e\n        \u003cp\u003e\n          Automatic stacker, sorting by pallet zones, IPG\/MAX\/Raycus laser source options, inline barcode\/etching for\n          traceability, fume extraction package, and integration interfaces for downstream forming\/welding cells.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- EXTENDED LINE PARAMETERS (ILLUSTRATIVE) --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\" id=\"coil-laser-60x0060-extended\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eExtended line parameters (illustrative ranges)\u003c\/h3\u003e\n    \u003cp class=\"umpro-product__intro\"\u003e\n      The values below represent typical ranges for a 60\" × 0.060\" coil-fed 6 kW fiber laser line and are meant to\n      support engineering discussions. Final values must come from the official Umprotech GA drawing, electrical\n      one-line, and performance specification for the configuration you select.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__specs-grid umpro-product__specs-grid--extended\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCoil thickness window (example):\u003c\/strong\u003e ≈ 0.020–0.060 in carbon steel\u003c\/p\u003e\n        \u003cp\u003e\n          Lower end (≈0.020–0.030\") offers extremely high cut speeds but is more sensitive to coil flatness and\n          handling; upper end (≈0.050–0.060\") remains well within 6 kW capability while still being motion-limited\n          in many nests rather than power-limited.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCoil inner\/outer diameter (example):\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp\u003e\n          ID: ≈ 20–24\" · OD: up to ≈ 60–72\"\u003cbr\u003e\n          Exact ranges depend on decoiler mandrel, brake system, and coil car design and must be confirmed against the\n          coil standards used by your service center.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eMechanical line speed (no cutting, example):\u003c\/strong\u003e up to ≈ 250–400 ft\/min\u003c\/p\u003e\n        \u003cp\u003e\n          Maximum feed rate of the servo\/leveler system without cutting. Real-world throughput is governed by cut\n          parameters, nest density, pierce counts, and non-cut movement rather than mechanical maximum alone.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eEffective cutting throughput (conceptual):\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp\u003e\n          For suitable part families, coil-fed blanking can deliver ≈1.5–3× effective throughput vs. comparable\n          sheet-fed systems by eliminating frequent pallet changes, reducing manual sheet handling, and minimizing\n          partial-sheet remnants (application-dependent, not a guaranteed multiplier).\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eFeed length accuracy (example):\u003c\/strong\u003e on the order of ±0.002–0.006 in\u003c\/p\u003e\n        \u003cp\u003e\n          Achievable feed-to-length accuracy over commonly used blank lengths when the line is installed, leveled,\n          and tensioned properly. Actual tolerances are finalized at commissioning and recorded in the line documentation.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser positioning repeatability (example):\u003c\/strong\u003e ≈ ±0.001–0.003 in\u003c\/p\u003e\n        \u003cp\u003e\n          Typical for modern 6 kW fiber motion platforms; exact values depend on drive configuration, encoder\n          resolution, mechanical stiffness, and calibration routines in the specific cutting cell used.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eAssist gas options (typical):\u003c\/strong\u003e O₂, N₂, air (where supported)\u003c\/p\u003e\n        \u003cp\u003e\n          O₂ for high-speed cutting with oxidized edges on non-cosmetic or structural parts; N₂ for bright,\n          low-oxidation edges suitable for paint- and weld-critical components; filtered air (if supported) to reduce\n          gas cost for selected thickness\/quality combinations in thin-gauge work.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eFume extraction (example):\u003c\/strong\u003e zoned under-table extraction\u003c\/p\u003e\n        \u003cp\u003e\n          Multiple extraction zones under the cutting area, sequenced with head position. Filtration and ducting are\n          sized for the expected duty cycle and particulate load on thin-gauge materials.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cp style=\"font-size:13px; color:#64748b; margin-top:8px;\"\u003e\n      \u003cstrong\u003eImportant:\u003c\/strong\u003e Use these ranges for conceptual engineering and ROI analysis. Binding performance,\n      utilities, and tolerance guarantees must come from signed Umprotech documentation for your final configuration.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- PROCESS WINDOW \u0026 PERFORMANCE --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--performance\" id=\"coil-laser-60x0060-performance\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCutting performance \u0026amp; process window\u003c\/h3\u003e\n    \u003cp\u003e\n      On thin-gauge material up to 0.060\", a 6 kW fiber laser has ample power; performance is typically limited by\n      motion dynamics, piercing, and nest design rather than available wattage. The coil-fed architecture ensures that\n      this cutting capability translates into real parts per shift.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__formula\"\u003e\n      \u003cp\u003e\u003cstrong\u003eSimplified energy relationship for continuous cutting:\u003c\/strong\u003e\u003c\/p\u003e\n      \u003cp style=\"font-family:monospace; font-size:14px; margin:4px 0 8px;\"\u003e\n        P\u003csub\u003elaser\u003c\/sub\u003e ≈ q × t × v × w\u003csub\u003ekerf\u003c\/sub\u003e × η\n      \u003c\/p\u003e\n      \u003cul class=\"umpro-product__list\"\u003e\n        \u003cli\u003e\n\u003cstrong\u003eP\u003csub\u003elaser\u003c\/sub\u003e\u003c\/strong\u003e – available laser power (6 kW nominal)\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eq\u003c\/strong\u003e – specific energy per unit volume of the material\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003et\u003c\/strong\u003e – sheet thickness (up to 0.060\")\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003ev\u003c\/strong\u003e – cutting speed along the path\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003ew\u003csub\u003ekerf\u003c\/sub\u003e\u003c\/strong\u003e – kerf width\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eη\u003c\/strong\u003e – overall efficiency (optics, absorption, assist gas dynamics)\u003c\/li\u003e\n      \u003c\/ul\u003e\n      \u003cp style=\"font-size:13px; color:#64748b; margin-top:4px;\"\u003e\n        At the thin-gauge end, P\u003csub\u003elaser\u003c\/sub\u003e is rarely the bottleneck; instead, optimizing path strategy (common-line\n        cutting, microtab usage, reduced re-positions) and nest density has the largest impact on real cycle time.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"umpro-product__specs-grid umpro-product__specs-grid--simple-table\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__subheading\"\u003ePractical considerations up to 0.060\"\u003c\/h4\u003e\n        \u003cul class=\"umpro-product__list\"\u003e\n          \u003cli\u003e\n            Thin material is more prone to vibration and up-forms; leveler setup and tension control are critical to\n            keep the strip stable under the cutting head.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            For highly cosmetic parts, N₂ cutting at high speed with tuned parameters can deliver clean, low-oxidation\n            edges that reduce secondary finishing.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            Dense nests with many small features and holes will be limited by pierce count and head motion, not by the\n            maximum linear cutting speed.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            Coil flatness specification from the service center should be aligned with your edge tolerance and\n            downstream forming requirements—especially at the thinner end of the range.\n          \u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__subheading\"\u003eCoil vs. sheet workflow impact\u003c\/h4\u003e\n        \u003cul class=\"umpro-product__list\"\u003e\n          \u003cli\u003e\n            Coil-fed thin-gauge lines transform labor patterns: operators handle fewer but more substantial events\n            (coil changes, QC checks) instead of continuous sheet loading\/unloading.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            Nests can be designed as repeating patterns along the coil length, eliminating small partial sheets and\n            simplifying scrap handling via continuous skeleton removal.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            With automatic stacking and sorting, the line can approach coil-in \/ sorted-blanks-out operation on part\n            families that are stable in geometry and volume.\n          \u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- APPLICATIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\" id=\"coil-laser-60x0060-applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 60\" × 0.060\" coil-fed 6 kW fiber laser line is tailored to thin-gauge sheet metal environments\n      where coil is already the primary supply format and where stable, repeatable blank quality is crucial.\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eBlanking of HVAC panels, duct components, and plenums from 48–60\" coil.\u003c\/li\u003e\n      \u003cli\u003eAppliance panels, skins, brackets, and internal components in thin-gauge steel.\u003c\/li\u003e\n      \u003cli\u003eEnclosure and cabinet parts, including doors, sides, backs, and stiffeners.\u003c\/li\u003e\n      \u003cli\u003eHigh-mix contract manufacturing of nested kits feeding press brakes and panel benders.\u003c\/li\u003e\n      \u003cli\u003eProduction requiring part-level traceability via inline barcode\/etching and controlled stacking\/kit building.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- CONFIGURATIONS \u0026 OPTIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--options\" id=\"coil-laser-60x0060-options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003e\n      Configure the Umprotech 60\" coil-fed line to match your automation targets, part mix, and integration plans.\n      All configurations share the same core coil-handling and cutting platform; you scale automation around it.\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eBase Line:\u003c\/strong\u003e 10 t decoiler with brake and hold-down, precision straightener\/leveler,\n        servo feeder, 6 kW fiber laser with autofocus head, conveyor-based scrap removal, HMI with nesting and CAD import.\n        Parts are removed manually from the cutting area or downstream table.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto Stacker:\u003c\/strong\u003e Adds automatic blank stacking with pallet shuffle. Operators primarily handle\n        pallet exchanges and QC checks, not individual blanks.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto Stacker + Sorting:\u003c\/strong\u003e Zone-based part sorting to multiple pallets for mixed nests, kit\n        building, or routing to different downstream forming or welding cells—ideal for high-mix environments.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eLaser source options:\u003c\/strong\u003e IPG, MAX, or Raycus fiber sources, selected to align with your existing\n        installed base, service relationships, and total cost-of-ownership strategy.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eInline barcode\/etching:\u003c\/strong\u003e Mark each blank or skeleton with barcodes, QR codes, or text IDs for\n        integration with MES\/ERP, quality systems, and work-in-process tracking.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFume extraction package:\u003c\/strong\u003e Integrated extraction\/filtration sized to thin-gauge, high-speed operation,\n        supporting plant air quality and regulatory requirements.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- IMPLEMENTATION \u0026 SUPPORT --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--support\" id=\"coil-laser-60x0060-support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003e\n      Umprotech supports US job shops, OEMs, and contract manufacturers through the full lifecycle of coil-fed line\n      implementation—from feasibility and layout through commissioning and optimization. Because coil-fed systems\n      affect material supply, nesting, and downstream flow, early engineering engagement is essential.\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePre-install planning:\u003c\/strong\u003e review power requirements, floor space, foundations (if needed),\n        coil storage\/handling, access routes, and safety zoning for the coil-fed line.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eMaterial \u0026amp; part review:\u003c\/strong\u003e analysis of coil specs (width, thickness, ID\/OD, grades, coatings)\n        and representative part families to confirm suitability of the 60\" × 0.060\" 6 kW configuration.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eNesting \u0026amp; cycle-time study:\u003c\/strong\u003e creation of representative nests and throughput estimates to\n        compare coil-fed performance vs. current sheet-fed or turret workflows and support ROI justification.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eCommissioning \u0026amp; training:\u003c\/strong\u003e on-site installation, process parameter tuning, and\n        operator\/programmer\/maintenance training on coil handling, safety, diagnostics, and basic service tasks.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOngoing support:\u003c\/strong\u003e remote support (where available), on-site service, and process optimization\n        as your material mix, volumes, and part families evolve over time.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003e\n      Next step: send Umprotech your coil specifications (width, thickness range, ID\/OD, grades) and representative\n      part drawings or nests (DXF\/STEP\/PDF). We’ll verify technical fit, model cycle times, and recommend a configuration\n      and layout aligned with your throughput, labor, and ROI targets.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- ENGINEERING FAQ --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--engineering\" id=\"coil-laser-60x0060-faq\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eEngineering notes \u0026amp; technical FAQ\u003c\/h3\u003e\n\n    \u003ch4 class=\"umpro-product__subheading\"\u003eHow should I interpret the 0.060\" thickness rating with a 6 kW laser?\u003c\/h4\u003e\n    \u003cp\u003e\n      The 0.060\" maximum thickness is a nominal rating for carbon steel at specified mechanical properties and flatness.\n      In practice:\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        6 kW provides abundant power headroom in this range; for many nests, the limiting factors are motion, piercing,\n        and path strategy rather than raw wattage.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        Higher-strength steels, galvanized coatings, and cosmetic edge requirements can reduce effective thickness or\n        speed at a given power level; these must be validated in cut trials.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        Very thin gauges (≈0.020–0.030\") demand careful control of assist gas, focus, and leveling to avoid vibration,\n        burring, or micro-distortion in small features.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003ch4 class=\"umpro-product__subheading\"\u003eWhat data is required to properly size and justify this line?\u003c\/h4\u003e\n    \u003cp\u003e\n      To configure and justify a 60\" × 0.060\" coil-fed 6 kW fiber laser line, Umprotech typically requests:\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eAnnual tonnage by thickness and grade in the ≈0.020–0.060\" range on 48–60\" coil.\u003c\/li\u003e\n      \u003cli\u003eRepresentative part families, including geometry, thickness, tolerances, and edge-quality requirements.\u003c\/li\u003e\n      \u003cli\u003eCurrent cutting processes, cycle times, staffing levels, and material-handling practices.\u003c\/li\u003e\n      \u003cli\u003eTarget throughput, OEE, labor reduction, and inventory\/flow objectives.\u003c\/li\u003e\n      \u003cli\u003eLayout constraints and integration goals with forming, welding, and assembly operations.\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003ch4 class=\"umpro-product__subheading\"\u003eHow does coil-fed cutting change nesting and scrap strategy?\u003c\/h4\u003e\n    \u003cp\u003e\n      Coil-based nesting has important differences from sheet-based nesting:\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        Nests can be defined as repeating patterns along the strip length, reducing partial sheets and simplifying\n        skeleton handling via continuous scrap removal.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        Skeleton management becomes a continuous process; scrap conveyors and, where appropriate, choppers can be\n        used to handle skeleton and slug removal efficiently.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        Common-line cutting and edge-sharing along the coil direction can significantly improve material yield,\n        but must be balanced against skeleton stability and part retention until stacking.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003ch4 class=\"umpro-product__subheading\"\u003eWhen does a 60\" × 0.060\", 6 kW coil-fed line make sense?\u003c\/h4\u003e\n    \u003cp\u003e\n      In general, this configuration is a strong fit when:\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        A substantial share of your workload is 0.020–0.060\" carbon steel from 48–60\" coil, with recurring part\n        families and stable demand.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        Manual sheet handling and pallet changes are limiting throughput or consuming disproportionate labor.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        You aim to implement coil-in \/ palletized-blanks-out workflows feeding press brakes, panel benders, or weld cells.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        You need consistent blank quality and traceability and are ready to align engineering and planning practices\n        to a coil-based nesting and scheduling model.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e\n","brand":"Umprotech","offers":[{"title":"Base Line","offer_id":52967293354350,"sku":"UCFL-60W-006T-6KW-10T-BASE","price":427900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Stacker","offer_id":52967293387118,"sku":"UCFL-60W-006T-6KW-10T-STK","price":507900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Stacker + Sorting","offer_id":52967293419886,"sku":"UCFL-60W-006T-6KW-10T-STS","price":607900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-coil-fed-fiber-laser-48in-x-0135in-4kw-10t-7140182.png?v=1772248328"},{"product_id":"umprotech-coil-fed-fiber-laser-72in-0-06in-6kw-15t","title":"Umprotech Coil-Fed Fiber Laser 72in x 0.060in, 6kW, 15t Decoiler","description":"\u003csection class=\"umpro-product\" id=\"umprotech-coil-laser-72x0060-6kw\"\u003e\n  \u003c!--\n    INTERNAL ENGINEERING NOTE (NOT FOR PUBLISHING):\n    - All “example” \/ “typical” ranges below must be validated against the official Umprotech\n      mechanical, electrical, and performance specs for the 72\" × 0.060\" 6 kW line.\n    - 0.060\" capacity assumes low-carbon steel within a defined yield-strength\/flatness band,\n      with properly configured leveling, tension control, assist gas, and cutting parameters.\n    - Stainless, HSLA, galvanized, and aluminum require derated thickness and\/or speed; confirm\n      per application with Umprotech applications engineering and cut trials.\n  --\u003e\n\n  \u003c!-- HERO \/ OVERVIEW --\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eUmprotech Coil-Fed Fiber Laser – 72 in × 0.060 in, 6 kW, 15 t Decoiler\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003e\n      Fully integrated 72\" coil-fed fiber laser blanking line engineered for high-throughput sheet processing,\n      precision blanking, and automated material flow. Designed for US job shops, OEMs, and fabrication cells\n      that run thin-gauge carbon steel from coil and want to convert coil tonnage directly into finished blanks\n      with minimal manual handling.\n    \u003c\/p\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003e\n      The line combines a 15 t decoiler, precision straightener\/leveler, servo feeder, and 6 kW fiber laser into\n      a single system—optimized for continuous, repeatable cutting on material up to 0.060\" thick across the full\n      72\" width, feeding press brakes, panel benders, and welding cells with stable, dimensionally consistent blanks.\n    \u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\n      \u003cstrong\u003eMaximum coil width:\u003c\/strong\u003e 72 in ·\n      \u003cstrong\u003eMax thickness (rating):\u003c\/strong\u003e up to 0.060 in carbon steel* ·\n      \u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber ·\n      \u003cstrong\u003eDecoiler:\u003c\/strong\u003e 15 t capacity\n    \u003c\/p\u003e\n    \u003cp style=\"font-size:13px; color:#64748b; margin-top:4px;\"\u003e\n      *0.060\" rating applies to carbon steel within a specified yield-strength and flatness range, at a defined duty cycle.\n      Other alloys and coatings (stainless, HSLA, galvanized, aluminum) require application-specific derating and validation.\n    \u003c\/p\u003e\n  \u003c\/header\u003e\n\n  \u003c!-- KEY ADVANTAGES --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\" id=\"coil-laser-72x0060-advantages\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eCoil-to-part automation on 72\" strip:\u003c\/strong\u003e 15 t decoiler, straightener, and servo feeder provide\n        continuous feeding from coil, cutting out most sheet loading, pallet exchanges, and staging typical of\n        sheet-fed lasers.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003e72\" working width:\u003c\/strong\u003e Supports wide-format panel work, large cabinet and enclosure blanks,\n        nested kits, and multi-row patterns that fully exploit 72\" service-center coils.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003e6 kW fiber power optimized for thin gauge:\u003c\/strong\u003e On up to 0.060\" material, 6 kW provides\n        significant speed headroom; in many nests the process becomes motion- and piercing-limited rather than power-limited.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePrecision straightener\/leveler + servo feeder:\u003c\/strong\u003e Controls coil set, crossbow, and feed length\n        so that the strip entering the cutting zone is flat and repeatably positioned—critical for tight-tolerance\n        blanks and stable downstream forming or welding.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eHigh-mix capable via nesting and CAD import:\u003c\/strong\u003e HMI with built-in nesting and CAD import\n        (e.g., DXF) supports fast program changes, kit-based production, and efficient material utilization on\n        recurring part families.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eScalable automation path:\u003c\/strong\u003e Start with a base line and add automatic stacker and zone-based\n        sorting as volume grows, moving toward coil-in \/ palletized-blanks-out workflows.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegrated scrap and fume management:\u003c\/strong\u003e Conveyor scrap removal and optional fume extraction\n        packages help maintain a clean, safe operating environment in continuous-duty production.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- CORE TECHNICAL SPECS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\" id=\"coil-laser-72x0060-specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eDecoiler capacity:\u003c\/strong\u003e up to 15 t\u003c\/p\u003e\n        \u003cp\u003e\n          Handles heavy 72\" coils to maximize run length between coil changes. Coil ID\/OD and width ranges are\n          matched to your service-center supply and confirmed at the proposal stage.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eMaximum coil \/ working width:\u003c\/strong\u003e 72 in\u003c\/p\u003e\n        \u003cp\u003e\n          Supports wide-format panels, door skins, bottom pans, and multi-row nested parts. 72\" width is especially\n          advantageous when parts approach 48–60\" in one dimension or when multiple rows of smaller parts are nested.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eMaterial thickness (carbon steel rating):\u003c\/strong\u003e up to 0.060 in\u003c\/p\u003e\n        \u003cp\u003e\n          Thin-gauge range targeted at HVAC, appliances, and general fabrication. Practical process window depends\n          on grade, coating, flatness, and required edge quality; stainless, HSLA, and galvanized are derated by application.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber laser\u003c\/p\u003e\n        \u003cp\u003e\n          Offers ample power headroom in the 0.024–0.060\" range, enabling high feed rates and the use of nitrogen\n          cutting where edge cosmetics or weld prep requirements demand low oxidation.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser cutting head:\u003c\/strong\u003e Autofocus fiber head with collision protection\u003c\/p\u003e\n        \u003cp\u003e\n          Programmable focus position, pierce heights, and cut parameter sets for different materials and thicknesses.\n          Collision protection\/breakaway mechanics help protect optics and nozzle in the event of up-forms or skeleton contact.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eIntegrated automation:\u003c\/strong\u003e Straightener\/leveler, servo feeder, conveyor scrap removal\u003c\/p\u003e\n        \u003cp\u003e\n          Multi-roll precision leveler mitigates coil memory and crossbow; servo feeder indexes strip into the cutting\n          zone with encoder feedback; conveyor scrap removal manages skeleton and slugs away from the cutting area.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLine components:\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp\u003e\n          Coil car (optional), 15 t decoiler with brake and hold-down, peeler\/threading section, precision\n          straightener\/leveler, servo feeder, 6 kW fiber laser cutting cell, under-table scrap\/skeleton conveyor,\n          optional automatic stacker and sorting system, HMI with nesting and CAD import.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eHMI \u0026amp; software:\u003c\/strong\u003e Nesting and CAD import\u003c\/p\u003e\n        \u003cp\u003e\n          Centralized control of coil handling and cutting. Job queues, material libraries, and CAD (e.g., DXF) import\n          support high-mix\/low-volume workflows and recurring production programs with minimal manual re-entry.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e Automation and environment\u003c\/p\u003e\n        \u003cp\u003e\n          Automatic stacker, stacker with pallet-zone sorting, IPG\/MAX\/Raycus sources, inline barcode\/etching,\n          fume extraction package, and integration interfaces for downstream forming and welding cells.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- EXTENDED LINE PARAMETERS (ILLUSTRATIVE) --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\" id=\"coil-laser-72x0060-extended\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eExtended line parameters (illustrative ranges)\u003c\/h3\u003e\n    \u003cp class=\"umpro-product__intro\"\u003e\n      The ranges below reflect typical values for a 72\" × 0.060\" coil-fed 6 kW fiber laser line and are intended for\n      technical discussion only. Final values must come from the official Umprotech GA drawing, electrical one-line,\n      and performance specification for your configured system.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__specs-grid umpro-product__specs-grid--extended\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCoil thickness window (example):\u003c\/strong\u003e ≈ 0.020–0.060 in carbon steel\u003c\/p\u003e\n        \u003cp\u003e\n          Lower end (≈0.020–0.030\") is highly productive but sensitive to leveling and tension control; upper end\n          (≈0.050–0.060\") still leaves the process more motion-limited than power-limited with 6 kW.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCoil inner\/outer diameter (example):\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp\u003e\n          ID: ≈ 20–24\" · OD: up to ≈ 72\"\u003cbr\u003e\n          Exact values depend on decoiler mandrel design, brake system, and coil car configuration, and must be\n          aligned with your coil supplier's standards during project definition.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eMechanical line speed (no cutting, example):\u003c\/strong\u003e up to ≈ 250–400 ft\/min\u003c\/p\u003e\n        \u003cp\u003e\n          Maximum feed rate achievable by the leveler\/feeder train. Actual part throughput is governed by cutting\n          parameters, nest density, pierce count, and rapid motions more than mechanical maximum alone.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eEffective cutting throughput (conceptual):\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp\u003e\n          For recurring part families, coil-fed blanking can deliver ≈1.5–3× effective throughput vs. comparable\n          sheet-fed systems by reducing pallet changes, manual sheet handling, and partial-sheet remnants\n          (application-dependent, not a guaranteed multiplier).\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eFeed length accuracy (example):\u003c\/strong\u003e on the order of ±0.002–0.006 in\u003c\/p\u003e\n        \u003cp\u003e\n          Achievable over typical blank lengths when the line is properly installed, leveled, and tensioned.\n          Final tolerances are established during commissioning and recorded in the line documentation.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser positioning repeatability (example):\u003c\/strong\u003e ≈ ±0.001–0.003 in\u003c\/p\u003e\n        \u003cp\u003e\n          Typical for modern 6 kW fiber motion platforms. Exact figures depend on drive type, encoder resolution,\n          frame stiffness, and calibration practices in the specific cutting cell used in the line.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eAssist gas options (typical):\u003c\/strong\u003e O₂, N₂, air (where supported)\u003c\/p\u003e\n        \u003cp\u003e\n          O₂ for high-speed structural or non-cosmetic parts; N₂ for bright edge quality where painting or welding\n          requires low oxidation; filtered air (if supported) to lower gas costs for selected thicknesses and finishes.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eFume extraction (example):\u003c\/strong\u003e zoned under-table extraction\u003c\/p\u003e\n        \u003cp\u003e\n          Multiple extraction zones under the cutting area, sequenced with head position. Filtration and ductwork are\n          sized for thin-gauge, high-speed duty cycles and expected particulate load.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cp style=\"font-size:13px; color:#64748b; margin-top:8px;\"\u003e\n      \u003cstrong\u003eImportant:\u003c\/strong\u003e Use these ranges to frame engineering and ROI discussions. Binding performance,\n      utility, and tolerance data must come from signed Umprotech documentation for the final configuration.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- PROCESS WINDOW \u0026 PERFORMANCE --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--performance\" id=\"coil-laser-72x0060-performance\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCutting performance \u0026amp; process window\u003c\/h3\u003e\n    \u003cp\u003e\n      At up to 0.060\" carbon steel, a 6 kW fiber laser typically has substantial power headroom. Real-world\n      throughput is therefore defined more by motion dynamics, piercing behavior, nest design, and coil handling\n      than by raw wattage. The coil-fed architecture ensures that available cutting capacity is converted into parts\n      by eliminating frequent sheet handling events.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__formula\"\u003e\n      \u003cp\u003e\u003cstrong\u003eSimplified energy relationship for continuous cutting:\u003c\/strong\u003e\u003c\/p\u003e\n      \u003cp style=\"font-family:monospace; font-size:14px; margin:4px 0 8px;\"\u003e\n        P\u003csub\u003elaser\u003c\/sub\u003e ≈ q × t × v × w\u003csub\u003ekerf\u003c\/sub\u003e × η\n      \u003c\/p\u003e\n      \u003cul class=\"umpro-product__list\"\u003e\n        \u003cli\u003e\n\u003cstrong\u003eP\u003csub\u003elaser\u003c\/sub\u003e\u003c\/strong\u003e – available laser power (6 kW nominal)\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eq\u003c\/strong\u003e – specific energy per unit volume of the material\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003et\u003c\/strong\u003e – sheet thickness (up to 0.060\")\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003ev\u003c\/strong\u003e – cutting speed along the path\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003ew\u003csub\u003ekerf\u003c\/sub\u003e\u003c\/strong\u003e – kerf width\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eη\u003c\/strong\u003e – overall process efficiency (optics, absorption, assist gas dynamics)\u003c\/li\u003e\n      \u003c\/ul\u003e\n      \u003cp style=\"font-size:13px; color:#64748b; margin-top:4px;\"\u003e\n        On thin-gauge coils, the process is often limited by acceleration, pierce time, and path strategy rather than\n        P\u003csub\u003elaser\u003c\/sub\u003e. Umprotech provides validated cut parameter tables and recommended nesting practices for\n        each material\/thickness combination.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"umpro-product__specs-grid umpro-product__specs-grid--simple-table\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__subheading\"\u003ePractical considerations at up to 0.060\"\u003c\/h4\u003e\n        \u003cul class=\"umpro-product__list\"\u003e\n          \u003cli\u003e\n            Thin strip is more sensitive to vibration, buckling, and thermal distortion; correct tensioning and\n            leveling are crucial to keep the strip stable beneath the cutting head.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            For cosmetic parts, nitrogen cutting at high speed with tuned parameters often eliminates the need for\n            secondary edge cleaning before painting or welding.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            Dense nests with many small perforations are cycle-time-limited by piercing and small rapid moves;\n            reducing pierce count via shared holes or pattern re-use can substantially improve throughput.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            Coil flatness specifications and incoming quality from the service center must be matched to your\n            tolerance and forming requirements, especially on parts with long bends or tight weld-up geometry.\n          \u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__subheading\"\u003eCoil vs. sheet workflow impact\u003c\/h4\u003e\n        \u003cul class=\"umpro-product__list\"\u003e\n          \u003cli\u003e\n            Labor shifts from continuous sheet loading\/unloading to fewer, more structured events: coil changes,\n            QC checks, pallet exchanges, and scheduled maintenance.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            Nests can be defined as repeating patterns along the strip, reducing partial-sheet remnants and enabling\n            fully utilized coil lengths, especially useful for recurring part families.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            With automatic stacking and sorting, the line can approach coil-in \/ sorted-blanks-out operation for\n            stable product mixes, feeding press brakes, panel benders, or weld cells with minimal intermediate handling.\n          \u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- APPLICATIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\" id=\"coil-laser-72x0060-applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 72\" × 0.060\" coil-fed 6 kW fiber laser line is suited to thin-gauge production where 72\" coils\n      are standard and where blank quality, consistency, and traceability drive downstream performance.\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eBlanking of large HVAC panels, plenum walls, and duct components from 72\" coil.\u003c\/li\u003e\n      \u003cli\u003eCabinet and enclosure panels, door skins, and machine covers requiring wide-format blanks.\u003c\/li\u003e\n      \u003cli\u003eNested brackets, frames, and profiles up to 0.060\" thick for OEM and contract manufacturing.\u003c\/li\u003e\n      \u003cli\u003eKit-based production where multiple part numbers from a single coil are stacked or sorted by pallet zones.\u003c\/li\u003e\n      \u003cli\u003eThin-gauge blanks feeding press brakes, panel benders, roll-form lines, or robotic welding cells.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- CONFIGURATIONS \u0026 OPTIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--options\" id=\"coil-laser-72x0060-options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003e\n      Configure the Umprotech 72\" coil-fed fiber laser line to match your automation strategy, part mix, and\n      integration requirements. All variants share the same core coil handling and 6 kW cutting platform; automation\n      and traceability options can be layered in as volume and complexity grow.\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eBase Line:\u003c\/strong\u003e 15 t decoiler with brake and hold-down, precision straightener\/leveler,\n        servo feeder, 6 kW fiber laser with autofocus head, conveyor scrap\/skeleton removal, HMI with nesting and CAD import.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto Stacker:\u003c\/strong\u003e Automatic blank stacking with pallet shuffle. Ideal for high-throughput runs\n        where operators primarily handle pallet changes and quality checks rather than individual blanks.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto Stacker + Sorting:\u003c\/strong\u003e Zone-based part sorting for mixed nests and kit building, routing\n        different part numbers to dedicated pallets for downstream press brakes, panel benders, or weld cells.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eLaser source options:\u003c\/strong\u003e IPG, MAX, or Raycus fiber sources to align with your installed base,\n        technical preferences, and long-term service strategy.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eInline barcode\/etching:\u003c\/strong\u003e Part-level or kit-level marking (barcodes, QR codes, text) for\n        integration with MES\/ERP, traceability, and quality documentation.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFume extraction package:\u003c\/strong\u003e Extraction and filtration sized to thin-gauge, high-speed cutting,\n        supporting plant air quality and regulatory compliance.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eCustom automation:\u003c\/strong\u003e Interfaces and mechanical provisions for integration with coil storage,\n        automated guided vehicles (AGVs), press brakes, panel benders, weld cells, and assembly lines.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- IMPLEMENTATION \u0026 SUPPORT --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--support\" id=\"coil-laser-72x0060-support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003e\n      Umprotech works closely with US job shops, OEMs, and integrators to specify, install, and ramp coil-fed laser\n      lines with minimal disruption to ongoing production. Because coil-fed systems impact material supply,\n      scheduling, and downstream flow, early engineering involvement is key.\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePre-install planning:\u003c\/strong\u003e analysis of power, floor space, foundations (if required), coil storage,\n        access routes, safety zoning, and interaction with existing equipment.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eMaterial \u0026amp; part review:\u003c\/strong\u003e assessment of coil specs (width, thickness, ID\/OD, grades, coatings)\n        and representative part families to confirm that a 72\" × 0.060\" thin-gauge, 6 kW configuration is the correct fit.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eNesting \u0026amp; throughput studies:\u003c\/strong\u003e creation of representative nests and cycle-time estimates to\n        compare coil-fed performance to existing sheet-fed or turret-based processes and support ROI modeling.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eCommissioning \u0026amp; training:\u003c\/strong\u003e on-site installation, cut-parameter tuning, and training for\n        operators, programmers, and maintenance staff (coil handling, safety, diagnostics, preventive maintenance).\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOngoing support:\u003c\/strong\u003e remote diagnostics (where available), on-site service, and process optimization\n        as your material mix, part families, and production volumes evolve.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003e\n      Next step: send Umprotech your coil specifications (width, thickness range, ID\/OD, grades) and representative\n      part drawings or nests (DXF\/STEP\/PDF). We’ll validate technical fit, estimate cycle times, and recommend a\n      configuration and layout that aligns with your throughput, labor, and ROI objectives.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- ENGINEERING FAQ --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--engineering\" id=\"coil-laser-72x0060-faq\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eEngineering notes \u0026amp; technical FAQ\u003c\/h3\u003e\n\n    \u003ch4 class=\"umpro-product__subheading\"\u003eHow should I interpret the 0.060\" thickness rating with a 6 kW laser?\u003c\/h4\u003e\n    \u003cp\u003e\n      The 0.060\" maximum thickness is a nominal rating for carbon steel at specific mechanical properties and flatness.\n      In practice:\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        6 kW provides ample power for 0.024–0.060\" material; many nests are limited by motion and piercing rather than\n        power once cut parameters are tuned.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        Higher-strength steels, galvanized coatings, and cosmetic edge requirements can reduce usable thickness or\n        speed at a given power level; validation cuts are recommended before committing to new material families.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        At very thin gauges, thermal distortion and vibration can drive parameter choices; leveler setup and strip\n        tension control become more important than wattage alone.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003ch4 class=\"umpro-product__subheading\"\u003eWhat information is needed to size and justify this coil-fed line?\u003c\/h4\u003e\n    \u003cp\u003e\n      To configure and justify a 72\" × 0.060\" coil-fed 6 kW line, Umprotech will typically request:\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eAnnual tonnage by thickness and grade in the ≈0.020–0.060\" range on 60–72\" coil.\u003c\/li\u003e\n      \u003cli\u003eRepresentative part families (geometry, thickness, tolerances, edge\/finish requirements).\u003c\/li\u003e\n      \u003cli\u003eCurrent cutting\/blanking processes, cycle times, labor structure, and material-handling flow.\u003c\/li\u003e\n      \u003cli\u003eTarget throughput, OEE, and labor or WIP reduction goals for the new line.\u003c\/li\u003e\n      \u003cli\u003eLayout constraints and integration requirements with forming, welding, and assembly operations.\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003ch4 class=\"umpro-product__subheading\"\u003eHow does coil-fed blanking change nesting and scrap strategy?\u003c\/h4\u003e\n    \u003cp\u003e\n      Coil-based nesting introduces several differences compared with sheet-based nesting:\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        Nests are often defined as repeatable patterns along the strip, simplifying planning and reducing\n        partial-sheet leftovers.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        Skeleton and scrap handling is continuous rather than per-sheet; conveyor systems and optional choppers\n        manage skeleton and slug evacuation.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        Common-line cutting and edge-sharing along the coil direction can significantly improve material yield,\n        but must be balanced with skeleton stability and part retention until stacking\/sorting.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003ch4 class=\"umpro-product__subheading\"\u003eWhen does a 72\" × 0.060\", 6 kW coil-fed line make sense?\u003c\/h4\u003e\n    \u003cp\u003e\n      In broad terms, this configuration is a strong fit when:\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        A significant portion of your tonnage is 0.020–0.060\" carbon steel in 60–72\" coil width, with recurring\n        part families and stable demand.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        Manual sheet handling and pallet changes are constraining throughput or consuming high labor content,\n        especially on wide sheets.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        You are targeting coil-in \/ palletized-blanks-out workflows feeding press brakes, panel benders, or weld cells.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        Your engineering and planning teams are ready to adopt coil-based nesting and scheduling as a core part of\n        the fabrication workflow.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e\n","brand":"Umprotech","offers":[{"title":"Base Line","offer_id":52967293485422,"sku":"UCFL-72W-006T-6KW-15T-BASE","price":504900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Stacker","offer_id":52967293518190,"sku":"UCFL-72W-006T-6KW-15T-STK","price":584900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Stacker + Sorting","offer_id":52967293550958,"sku":"UCFL-72W-006T-6KW-15T-STS","price":684900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-coil-fed-fiber-laser-48in-x-0135in-4kw-10t-7140182.png?v=1772248328"},{"product_id":"umprotech-coil-fed-fiber-laser-60in-0-135in-6kw-15t","title":"Umprotech Coil-Fed Fiber Laser 60in x 0.135in, 6kW, 15t Decoiler","description":"\u003csection class=\"umpro-product\" id=\"umprotech-coil-laser-60x0135-6kw\"\u003e\n  \u003c!--\n    INTERNAL ENGINEERING NOTE (NOT FOR PUBLISHING):\n    - All “example” \/ “typical” ranges below must be validated against the official Umprotech\n      mechanical, electrical, and performance specs for the 60\" × 0.135\" 6 kW line.\n    - 0.135\" (≈3.4 mm) rating assumes low-carbon steel within a defined yield-strength, chemistry,\n      and flatness band, with properly configured leveling, tension control, assist gas, and cut parameters.\n    - Stainless, HSLA, galvanized, and aluminum require derated thickness and\/or speed; each must be\n      validated with Umprotech applications engineering and cut trials before being referenced in any guarantee.\n  --\u003e\n\n  \u003c!-- HERO \/ OVERVIEW --\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eUmprotech Coil-Fed Fiber Laser – 60 in × 0.135 in, 6 kW, 15 t Decoiler\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003e\n      Coil-fed fiber laser blanking line engineered for high-throughput sheet and plate processing directly from coil.\n      The Umprotech 60\" × 0.135\" line integrates heavy-duty coil handling, precision leveling, servo feeding, and a\n      6 kW fiber laser into a single automated system.\n    \u003c\/p\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003e\n      Designed for US job shops, OEMs, and contract fabricators that run 48–60\" coils in the ≈0.060–0.135\" range\n      and want to convert coil tonnage into consistent, ready-to-form blanks with minimal manual handling,\n      higher material yield, and predictable cycle times.\n    \u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\n      \u003cstrong\u003eMaximum coil width:\u003c\/strong\u003e 60 in ·\n      \u003cstrong\u003eMax thickness (rating):\u003c\/strong\u003e up to 0.135 in carbon steel* ·\n      \u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber ·\n      \u003cstrong\u003eDecoiler capacity:\u003c\/strong\u003e 15 t\n    \u003c\/p\u003e\n    \u003cp style=\"font-size:13px; color:#64748b; margin-top:4px;\"\u003e\n      *0.135\" rating applies to low-carbon steel within a specified yield-strength and flatness range, at a defined duty cycle.\n      Other alloys (stainless, HSLA, galvanized, aluminum) require application-specific derating and cut validation.\n    \u003c\/p\u003e\n  \u003c\/header\u003e\n\n  \u003c!-- KEY ADVANTAGES --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\" id=\"coil-laser-60x0135-advantages\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eTrue coil-to-part automation:\u003c\/strong\u003e 15 t decoiler, precision straightener\/leveler, and servo feeder\n        replace manual blank loading and repetitive sheet handling, shifting labor to supervised, higher-value tasks.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003e60\" width for structural and panel work:\u003c\/strong\u003e Optimized around 48–60\" coil formats common in US\n        supply chains, supporting a mix of panels, brackets, frames, and structural blanks without the footprint of 72\" lines.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003e0.135\" carbon steel capability:\u003c\/strong\u003e Bridges the gap between thin-gauge “sheet” and lighter plate,\n        supporting many structural, chassis, and formed-part applications from coil instead of discrete plate.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003e6 kW fiber power:\u003c\/strong\u003e Provides the power needed for 0.135\" carbon steel while maintaining high\n        speed on thinner material; supports both O₂ (speed) and N₂ (edge quality) cutting strategies.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePrecision leveling and feed:\u003c\/strong\u003e Multi-roll leveler and closed-loop servo feeder deliver flat,\n        accurately positioned strip—critical for bend consistency, weld-up accuracy, and stable cutting at higher thicknesses.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eHigh-mix friendly controls:\u003c\/strong\u003e HMI with nesting and CAD import supports frequent job changes,\n        mixed-part nests, and contract manufacturing workflows where part mix changes shift to shift.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eScalable automation path:\u003c\/strong\u003e Optional automatic stacker, zone-based sorting, inline marking,\n        and fume extraction enable the line to evolve from supervised operation to near lights-out on mature part families.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- CORE TECHNICAL SPECS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\" id=\"coil-laser-60x0135-specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eMaximum coil width:\u003c\/strong\u003e 60 in\u003c\/p\u003e\n        \u003cp\u003e\n          Processes common 48–60\" coils from US service centers. Supports single-row and multi-row nests for panels\n          and nested parts, balancing yield, throughput, and footprint.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eThickness rating (carbon steel):\u003c\/strong\u003e up to 0.135 in (≈3.4 mm)\u003c\/p\u003e\n        \u003cp\u003e\n          Covers typical light- to medium-gauge structural and formed parts where 0.075–0.135\" stock is common.\n          Actual process window depends on steel grade, coating, flatness, and edge-quality requirements.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber laser\u003c\/p\u003e\n        \u003cp\u003e\n          Sized to provide strong performance at 0.135\" while maintaining high cutting speeds on thinner gauges.\n          Supports parameter sets for O₂, N₂, and (where supported) air cutting strategies.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser head:\u003c\/strong\u003e Autofocus fiber head with collision protection\u003c\/p\u003e\n        \u003cp\u003e\n          CNC-controlled focus positioning, pierce height, and cut parameters. Collision protection\/breakaway\n          mechanics help safeguard optics and nozzle in the event of strip up-forms or skeleton contact.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eDecoiler capacity:\u003c\/strong\u003e up to 15 t\u003c\/p\u003e\n        \u003cp\u003e\n          Supports heavier coils typical at 0.075–0.135\" thickness. Larger coil mass reduces coil change frequency\n          and helps maintain a stable, continuous blanking process on higher-volume part families.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eStraightener\/leveler:\u003c\/strong\u003e heavy-duty precision leveler\u003c\/p\u003e\n        \u003cp\u003e\n          Multi-roll leveling system sized for 0.060–0.135\" material. Reduces coil set, crossbow, and residual\n          stress, improving edge quality and downstream bending and welding behavior at higher gauges.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eServo feeder:\u003c\/strong\u003e closed-loop servo + encoder feedback\u003c\/p\u003e\n        \u003cp\u003e\n          Controls feed length and strip position into the cutting zone. Supports repeatable blank length control\n          and consistent nest positioning over long runs and multiple coils of the same part family.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eIntegrated automation:\u003c\/strong\u003e coil handling + scrap removal\u003c\/p\u003e\n        \u003cp\u003e\n          Typical configuration includes coil car (optional), decoiler with hold-down and peeler, leveler, servo feeder,\n          laser cutting cell, and conveyor-based scrap\/skeleton removal to centralized bins or scrap handling.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eControl \u0026amp; programming:\u003c\/strong\u003e HMI with nesting \/ CAD import\u003c\/p\u003e\n        \u003cp\u003e\n          Unified interface for coil handling and cutting. Supports job queues, material libraries, and CAD (e.g., DXF)\n          import for nesting and repeatable setup on high-mix production schedules.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- EXTENDED LINE PARAMETERS (ILLUSTRATIVE) --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\" id=\"coil-laser-60x0135-extended\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eExtended line parameters (illustrative ranges)\u003c\/h3\u003e\n    \u003cp class=\"umpro-product__intro\"\u003e\n      The following are typical engineering ranges for a 60\" × 0.135\" coil-fed 6 kW fiber laser line. These values\n      are not guarantees and must be replaced by the official Umprotech GA drawing, electrical documentation, and\n      signed performance specification for your configured system.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__specs-grid umpro-product__specs-grid--extended\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCoil thickness window (example):\u003c\/strong\u003e ≈ 0.060–0.135 in carbon steel\u003c\/p\u003e\n        \u003cp\u003e\n          Below ≈0.060\", leveling and tension control become more demanding and may be better served by a\n          thin-gauge-optimized line; above ≈0.135\", power and line mechanics must be re-evaluated for a heavier-gauge configuration.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCoil inner\/outer diameter (example):\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp\u003e\n          ID: ≈ 20–24\" · OD: up to ≈ 72\"\u003cbr\u003e\n          Exact ranges depend on decoiler mandrel and brake design, coil car configuration, and must be aligned\n          with service-center coil specs during the project definition stage.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eMechanical line speed (no cutting, example):\u003c\/strong\u003e on the order of ≈ 150–300 ft\/min\u003c\/p\u003e\n        \u003cp\u003e\n          Represents the maximum feed capability of the leveler\/feeder train. Real-world part throughput is governed\n          more by cutting parameters, pierce counts, motion dynamics, and nest density than mechanical max alone,\n          especially at 0.135\".\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eEffective throughput advantage (conceptual):\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp\u003e\n          For recurring part families, coil-fed blanking can deliver ≈1.3–2.5× effective throughput vs. comparable\n          sheet-fed systems by reducing pallet changes, manual sheet handling, and partial-sheet remnants\n          (application-dependent; not a guaranteed multiplier).\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eFeed length accuracy (example):\u003c\/strong\u003e on the order of ±0.003–0.008 in\u003c\/p\u003e\n        \u003cp\u003e\n          Achievable over typical blank lengths in the 0.060–0.135\" range when the line is properly installed,\n          leveled, and tensioned. Final tolerances are established at commissioning and documented per line serial number.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser positioning repeatability (example):\u003c\/strong\u003e ≈ ±0.001–0.003 in\u003c\/p\u003e\n        \u003cp\u003e\n          Typical for modern 6 kW fiber motion platforms with linear or rack-and-pinion drives. Exact values depend\n          on drive selection, encoder resolution, frame stiffness, and calibration routines in the selected cutting cell.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eAssist gas options (typical):\u003c\/strong\u003e O₂, N₂, air (if supported)\u003c\/p\u003e\n        \u003cp\u003e\n          O₂ is common for structural and non-cosmetic parts where speed and cut robustness are priorities; N₂ is used\n          where minimal edge oxidation is required; filtered air (if enabled) can reduce gas cost on selected\n          thickness\/quality combinations.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eFume extraction (example):\u003c\/strong\u003e zoned under-table extraction\u003c\/p\u003e\n        \u003cp\u003e\n          Multiple extraction zones under the cutting area sequenced with head position. Filtration and ductwork are\n          sized for the duty cycle and particulate loading associated with 0.060–0.135\" material.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cp style=\"font-size:13px; color:#64748b; margin-top:8px;\"\u003e\n      \u003cstrong\u003eNote:\u003c\/strong\u003e These ranges support engineering and ROI discussions. Binding performance, utilities,\n      and tolerances must come from the signed Umprotech specification for your project.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- PERFORMANCE \u0026 PROCESS WINDOW --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--performance\" id=\"coil-laser-60x0135-performance\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCutting performance \u0026amp; process window\u003c\/h3\u003e\n    \u003cp\u003e\n      At 0.135\" carbon steel, the 6 kW fiber source operates closer to the power-limited regime than on thin sheet,\n      so cut speed, assist gas strategy, and nest design have a direct impact on effective throughput. The coil-fed\n      architecture eliminates most non-cut events related to sheet handling, so more of the available cutting capacity\n      is translated into finished blanks.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__formula\"\u003e\n      \u003cp\u003e\u003cstrong\u003eSimplified power \/ thickness relationship:\u003c\/strong\u003e\u003c\/p\u003e\n      \u003cp style=\"font-family:monospace; font-size:14px; margin:4px 0 8px;\"\u003e\n        P\u003csub\u003elaser\u003c\/sub\u003e ≈ q × t × v × w\u003csub\u003ekerf\u003c\/sub\u003e × η\n      \u003c\/p\u003e\n      \u003cul class=\"umpro-product__list\"\u003e\n        \u003cli\u003e\n\u003cstrong\u003eP\u003csub\u003elaser\u003c\/sub\u003e\u003c\/strong\u003e – available laser power (6 kW nominal)\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eq\u003c\/strong\u003e – specific energy per unit volume of material\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003et\u003c\/strong\u003e – thickness (up to 0.135\")\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003ev\u003c\/strong\u003e – cutting speed along path\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003ew\u003csub\u003ekerf\u003c\/sub\u003e\u003c\/strong\u003e – kerf width\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eη\u003c\/strong\u003e – total process efficiency (optics, absorption, assist gas dynamics)\u003c\/li\u003e\n      \u003c\/ul\u003e\n      \u003cp style=\"font-size:13px; color:#64748b; margin-top:4px;\"\u003e\n        As thickness increases, either cutting speed v or process efficiency η must be managed to stay within\n        P\u003csub\u003elaser\u003c\/sub\u003e. Umprotech provides validated cut parameter tables for each supported material\/assist-gas\n        combination at this thickness range.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"umpro-product__specs-grid umpro-product__specs-grid--simple-table\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__subheading\"\u003ePractical considerations at 0.135\"\u003c\/h4\u003e\n        \u003cul class=\"umpro-product__list\"\u003e\n          \u003cli\u003e\n            Leveling and tension control are critical: thicker strip stores more residual stress and can up-form if\n            not properly leveled and supported in the cutting zone.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            Pierce times and edge quality are more sensitive to assist gas and nozzle condition; consistent preventive\n            maintenance and nozzle checks are part of standard work instructions at this gauge.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            For formed parts, the relation between cut edge quality and downstream bending\/welding needs to be\n            validated, especially on higher-strength or HSLA materials.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            Nest design should consider skeleton rigidity at higher thickness to avoid strip movement and edge chatter,\n            particularly on narrow webs and long cuts along the coil direction.\n          \u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__subheading\"\u003eCoil vs. sheet workflow impact\u003c\/h4\u003e\n        \u003cul class=\"umpro-product__list\"\u003e\n          \u003cli\u003e\n            Coil-fed lines shift labor from constant sheet loading\/unloading to fewer events: coil changes, QC checks,\n            pallet exchanges, and routine maintenance.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            Repeating nests along the coil length reduce partial-sheet remnants and standardize scrap handling via\n            continuous skeleton removal.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            When combined with automatic stacking and sorting, the line can approach coil-in \/ sorted-blanks-out\n            operation for mature, repeat part families in the 0.060–0.135\" range.\n          \u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- APPLICATIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\" id=\"coil-laser-60x0135-applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 60\" × 0.135\" coil-fed 6 kW line is aimed at shops that routinely process medium-gauge coil and\n      need blanking to keep up with forming, welding, and assembly operations.\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eBlank production for structural frames, brackets, and weldments in the ≈0.075–0.135\" range.\u003c\/li\u003e\n      \u003cli\u003eCabinet, enclosure, and machinery panels where coil supply and 60\" width are standard.\u003c\/li\u003e\n      \u003cli\u003eHVAC, appliance, and general fabrication that rely on coil for cost and throughput advantages.\u003c\/li\u003e\n      \u003cli\u003ePre-cut blanks feeding press brakes, panel benders, robotic welding cells, or assembly lines.\u003c\/li\u003e\n      \u003cli\u003eContract manufacturing and OEM part supply where high-mix nests and repeat jobs share the same coil format.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- CONFIGURATIONS \u0026 OPTIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--options\" id=\"coil-laser-60x0135-options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 60\" coil-fed fiber laser line is available in multiple automation configurations, allowing you to\n      scale from a core coil-to-sheet line to a fully automated blanking cell as volumes and product families evolve.\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eBase Line:\u003c\/strong\u003e 15 t decoiler with hold-down and brake, heavy-duty precision straightener\/leveler,\n        servo feeder, 6 kW fiber laser with autofocus head, conveyor scrap\/skeleton removal, HMI with nesting\/CAD import.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto Stacker:\u003c\/strong\u003e Automatic blank stacking with pallet shuttle. Operators focus on pallet changes,\n        quality checks, and coil management instead of manual blank unloading.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto Stacker + Sorting:\u003c\/strong\u003e Zone-based sorting to multiple pallets from mixed nests, enabling kit\n        building, job-based output, or routing different part families to dedicated downstream processes.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFiber source options:\u003c\/strong\u003e IPG, MAX, or Raycus fiber sources to align with your service preferences,\n        installed base, and total cost-of-ownership strategy.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eInline barcode\/etching:\u003c\/strong\u003e Mark parts or skeletons with barcodes, QR codes, or text IDs for\n        traceability, MES\/ERP integration, and quality documentation.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFume extraction package:\u003c\/strong\u003e Extraction and filtration tailored to 0.060–0.135\" cutting duty,\n        enhancing operator safety and air quality in continuous production.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- IMPLEMENTATION \u0026 SUPPORT --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--support\" id=\"coil-laser-60x0135-support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003e\n      Umprotech works with US fabricators, OEMs, and integrators to ensure successful deployment of coil-fed\n      laser lines—from feasibility and specification through installation, ramp-up, and continuous improvement.\n      Because coil-fed systems affect material supply, layout, and downstream operations, early engineering engagement\n      is critical.\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePre-install review:\u003c\/strong\u003e power, floor loading, access, coil storage\/handling, safety zoning,\n        and interaction with existing forming and welding assets.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eMaterial \u0026amp; part analysis:\u003c\/strong\u003e review of coil specs (width, thickness, ID\/OD, grades, coatings)\n        and representative part families to confirm that a 60\" × 0.135\", 6 kW configuration matches your process window.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eNesting \u0026amp; cycle-time studies:\u003c\/strong\u003e sample nests, cycle-time estimates, and line utilization\n        modeling to support ROI calculations versus existing blanking methods (sheet-fed lasers, turret punches, etc.).\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eCommissioning \u0026amp; training:\u003c\/strong\u003e on-site installation, cut parameter tuning, and training for\n        operators, programmers, and maintenance on coil handling, safety, diagnostics, and preventive maintenance.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOngoing support:\u003c\/strong\u003e remote assistance (where available), scheduled service, and process optimization\n        as your material mix, tooling, and part families evolve over time.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003e\n      Next step: share your coil specifications (width, thickness range, ID\/OD, grades) and representative part drawings\n      or nests (DXF\/STEP\/PDF) with Umprotech. We will validate technical fit, estimate cycle times, and propose a\n      configuration and layout aligned with your throughput, labor, and ROI targets.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- ENGINEERING FAQ --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--engineering\" id=\"coil-laser-60x0135-faq\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eEngineering notes \u0026amp; technical FAQ\u003c\/h3\u003e\n\n    \u003ch4 class=\"umpro-product__subheading\"\u003eHow should I interpret the 0.135\" thickness rating with a 6 kW laser?\u003c\/h4\u003e\n    \u003cp\u003e\n      The 0.135\" maximum thickness is a nominal rating for carbon steel. In practice:\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        At 0.135\", the process is closer to power-limited than at thinner gauges; cut speeds must be matched to\n        power, assist gas, and quality requirements.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        Higher-strength or HSLA steels at 0.135\" may require lower speeds or different gas strategies; stainless\n        and galvanized material need specific parameter sets and derating.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        For formed parts and weldments, edge quality and HAZ at this thickness should be validated with test blanks\n        and downstream operations before committing to production.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003ch4 class=\"umpro-product__subheading\"\u003eWhat data is needed to size and justify a 60\" × 0.135\" coil-fed line?\u003c\/h4\u003e\n    \u003cp\u003e\n      To configure and justify this line, Umprotech typically requests:\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eAnnual tonnage by thickness and grade in the ≈0.060–0.135\" range on 48–60\" coils.\u003c\/li\u003e\n      \u003cli\u003eRepresentative part families (geometry, thickness, tolerances, edge-quality expectations).\u003c\/li\u003e\n      \u003cli\u003eCurrent blanking methods (sheet-fed laser, turret, shear, outsourced), cycle times, and labor content.\u003c\/li\u003e\n      \u003cli\u003eTarget throughput, OEE, labor reduction, WIP, and lead-time objectives.\u003c\/li\u003e\n      \u003cli\u003eLayout constraints and integration goals with press brakes, weld cells, and assembly lines.\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003ch4 class=\"umpro-product__subheading\"\u003eHow does coil-fed blanking change nesting and scrap management?\u003c\/h4\u003e\n    \u003cp\u003e\n      Compared to sheet-based systems:\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        Nests are often defined as repeating strip patterns along the coil length, simplifying planning and reducing\n        partial-sheet remnants.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        Skeleton and scrap handling becomes continuous; conveyor-based skeleton removal and (where applicable)\n        choppers manage scrap in a more automated way than per-sheet clearing.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        At 0.135\", skeleton stiffness and stability are important; common-line cutting and edge sharing must be\n        balanced against the need for a mechanically stable skeleton during cutting and feeding.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003ch4 class=\"umpro-product__subheading\"\u003eWhen does a 60\" × 0.135\", 6 kW coil-fed line make sense versus a 0.060\" line?\u003c\/h4\u003e\n    \u003cp\u003e\n      A 60\" × 0.135\", 6 kW configuration is generally preferred when:\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eA significant portion of your workload is 0.075–0.135\" carbon steel on 48–60\" coils.\u003c\/li\u003e\n      \u003cli\u003eYour downstream forming\/welding operations are often constrained by blanking capacity on medium gauge material.\u003c\/li\u003e\n      \u003cli\u003eYou want to consolidate shear\/laser\/turret operations for this thickness range onto a single coil-fed platform.\u003c\/li\u003e\n      \u003cli\u003eYour engineering and planning teams are ready to move to coil-based nesting and scheduling for medium-gauge parts.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e\n","brand":"Umprotech","offers":[{"title":"Base Line","offer_id":52967293714798,"sku":"UCFL-60W-0135T-6KW-15T-BASE","price":509900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Stacker","offer_id":52967293747566,"sku":"UCFL-60W-0135T-6KW-15T-STK","price":589900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Stacker + Sorting","offer_id":52967293780334,"sku":"UCFL-60W-0135T-6KW-15T-STS","price":689900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-coil-fed-fiber-laser-48in-x-0135in-4kw-10t-7140182.png?v=1772248328"},{"product_id":"umprotech-combined-plate-tube-laser-5x10ft-6kw-tube20ft-8in-chuck","title":"Umprotech Combined Plate \u0026 Tube Fiber Laser 5x10ft, 6kW, Tube 20ft, 8in Chuck","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eUmprotech Combined Plate \u0026amp; Tube Fiber Laser – 5x10ft, 6kW, Tube 20ft, 8in Chuck\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003eEngineered for US fabrication shops and OEMs, this combined plate and tube fiber laser delivers 6kW cutting power, a 5x10ft exchange table, and a 20ft tube module with an 8 inch servo chuck. Ideal for high-mix production, it bridges flat and tubular work in a single footprint.\u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003ePlate bed:\u003c\/strong\u003e 5x10ft · \u003cstrong\u003eLaser source:\u003c\/strong\u003e 6kW · \u003cstrong\u003eTube length:\u003c\/strong\u003e 20ft · \u003cstrong\u003eChuck:\u003c\/strong\u003e 8 in servo\u003c\/p\u003e\n  \u003c\/header\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003eHandles both flat plate (5x10ft) and tube (up to 20ft, 8 in diameter) in one machine for flexible job shop flow.\u003c\/li\u003e\n      \u003cli\u003e6kW fiber laser source (IPG \/ MAX Photonics \/ Raycus) for fast, reliable cutting across steel, stainless, and aluminum.\u003c\/li\u003e\n      \u003cli\u003eExchange table boosts throughput—load next sheet while cutting continues.\u003c\/li\u003e\n      \u003cli\u003eAutofocus cutting head and pneumatic self-centering chuck reduce setup time and improve part accuracy.\u003c\/li\u003e\n      \u003cli\u003eTube module supports bevel cutting (option) and steady rests for long, precise tube work.\u003c\/li\u003e\n      \u003cli\u003eIntegrated scrap conveyor and fume extraction ports for cleaner, safer operation.\u003c\/li\u003e\n      \u003cli\u003eFull safety enclosure and light curtains included for operator protection and compliance.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003ePlate cutting bed:\u003c\/strong\u003e 5x10ft\u003c\/p\u003e\n        \u003cp\u003eAccommodates standard US sheet sizes—ideal for panels, frames, and cabinets.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser source power:\u003c\/strong\u003e 6kW\u003c\/p\u003e\n        \u003cp\u003eDelivers high cutting speed and edge quality across a range of metals.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eTube module:\u003c\/strong\u003e 20ft length, 8 in servo chuck\u003c\/p\u003e\n        \u003cp\u003eProcesses round, square, and rectangular tube up to 20ft long and 8 inches diameter.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eAutomation:\u003c\/strong\u003e Exchange table, optional auto sheet load\/unload and tube bundle loader\u003c\/p\u003e\n        \u003cp\u003eBoosts productivity for both high-mix and repeat production.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Autofocus\u003c\/p\u003e\n        \u003cp\u003eMaintains optimal focus for different materials and thicknesses.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eSafety:\u003c\/strong\u003e Full enclosure, light curtains\u003c\/p\u003e\n        \u003cp\u003eMeets modern shop safety standards and improves operator confidence.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eSoftware:\u003c\/strong\u003e Nesting\/CAD import (DXF\/STEP)\u003c\/p\u003e\n        \u003cp\u003eSimplifies programming for complex part geometries and batch runs.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eSources available:\u003c\/strong\u003e IPG, MAX Photonics, Raycus\u003c\/p\u003e\n        \u003cp\u003eChoose the laser source to match your shop's preference and service requirements.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003eThis combined plate and tube fiber laser is a workhorse for shops needing both flat and tubular part production—whether as a standalone cell or integrated with press brakes, saws, and welding stations.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eFlat parts: brackets, panels, machine covers, enclosures, base plates\u003c\/li\u003e\n      \u003cli\u003eTube parts: frames, supports, structural members, racks, piping elements\u003c\/li\u003e\n      \u003cli\u003eIndustries: contract manufacturing, metal fabrication, machinery, OEM components, job shops\u003c\/li\u003e\n      \u003cli\u003eSupports high-mix\/low-volume runs, repeat orders, and prototyping with fast changeover\u003c\/li\u003e\n      \u003cli\u003eIdeal for shops looking to consolidate plate and tube work onto a single, flexible platform\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003eConfigure the Umprotech combined laser to match your workflow—from base automation to full auto loading for both plate and tube.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBase Line:\u003c\/strong\u003e 5x10ft exchange table, 6kW laser, 20ft tube module, 8 in chuck, enclosure, light curtains\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eAuto Sheet Load\/Unload:\u003c\/strong\u003e Adds automated sheet handling for higher throughput\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eAuto Sheet L\/U + Tube Bundle Loader:\u003c\/strong\u003e Full automation for both plate and tube loading\/unloading\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCutting head:\u003c\/strong\u003e Autofocus standard; tube bevel cutting option available\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eLaser source:\u003c\/strong\u003e Select from IPG, MAX Photonics, or Raycus\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e All configurations include full enclosure and light curtains\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003eWe work closely with US job shops and OEMs to ensure a smooth transition—reviewing your parts, floor layout, and utilities before installation. Our team assists with programming, nesting, and basic application setup so your operators are productive from day one.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003ePre-install checks: power, floor space, material flow, safety requirements\u003c\/li\u003e\n      \u003cli\u003eApplication review: confirm fit for your plate and tube part mix\u003c\/li\u003e\n      \u003cli\u003eTraining: machine operation, nesting software, maintenance basics\u003c\/li\u003e\n      \u003cli\u003eOngoing support for upgrades, automation, and process optimization\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eNext step: Send us sample part drawings (DXF\/STEP\/PDF) and we’ll confirm fit, cycle time, and the best configuration for your workflow.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Base Line","offer_id":52967298302318,"sku":"UCPT-5x10-6KW-T20FT-C8IN-BASE","price":259900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Sheet Load\/Unload","offer_id":52967298335086,"sku":"UCPT-5x10-6KW-T20FT-C8IN-SLU","price":334900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Sheet L\/U + Tube Bundle Loader","offer_id":52967298367854,"sku":"UCPT-5x10-6KW-T20FT-C8IN-SLU-TBL","price":424900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/3efe2098-60dc-45c4-b923-446ad306a2d4_7ea9f461-32ce-4e05-91af-0f7d0dda9353.png?v=1779687289"},{"product_id":"umprotech-combined-plate-tube-laser-5x10ft-8kw-tube20ft-8in-chuck","title":"Umprotech Combined Plate \u0026 Tube Fiber Laser, 5x10ft, 8kW, 20ft Tube, 8in Chuck","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eUmprotech Combined Plate \u0026amp; Tube Fiber Laser – 5x10ft Bed, 8kW, 20ft Tube, 8in Chuck\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003eEngineered for US job shops and OEMs needing high-mix plate and tube cutting, this Umprotech system delivers 8kW fiber laser power with a 5x10ft exchange table and a 20ft tube module with 8 inch servo chuck. Ideal for fabricators seeking to consolidate flat and tubular processing in one footprint.\u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eLaser Power:\u003c\/strong\u003e 8kW · \u003cstrong\u003ePlate Bed:\u003c\/strong\u003e 5x10ft · \u003cstrong\u003eTube:\u003c\/strong\u003e 20ft, 8in Chuck\u003c\/p\u003e\n  \u003c\/header\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e8kW fiber laser source for fast, clean cutting of steel, stainless, and aluminum in both plate and tube formats.\u003c\/li\u003e\n      \u003cli\u003e5x10ft plate bed with exchange table supports high throughput and seamless integration with upstream\/downstream automation.\u003c\/li\u003e\n      \u003cli\u003e20ft tube cutting module with 8 inch pneumatic self-centering servo chuck handles a wide range of profiles and diameters.\u003c\/li\u003e\n      \u003cli\u003eAutofocus cutting head maximizes cut quality and reduces manual setup for varying thicknesses.\u003c\/li\u003e\n      \u003cli\u003eAvailable automation packages: base, auto sheet load\/unload, and tube bundle loader for scalable productivity.\u003c\/li\u003e\n      \u003cli\u003eSafety enclosure and light curtains ensure operator protection and compliance with US shop standards.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 8kW\u003c\/p\u003e\n        \u003cp\u003eHigh power for fast cutting speeds and thick material capability in both flat and tubular stock.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003ePlate bed size:\u003c\/strong\u003e 5x10ft\u003c\/p\u003e\n        \u003cp\u003eAccommodates standard US sheet sizes for efficient nesting and minimal waste.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eTube module:\u003c\/strong\u003e 20ft length, 8in servo chuck\u003c\/p\u003e\n        \u003cp\u003eProcesses round, square, and rectangular tubes up to 20ft long and 8 inches in diameter.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Autofocus\u003c\/p\u003e\n        \u003cp\u003eReduces manual intervention and ensures optimal focus across different thicknesses.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eChuck:\u003c\/strong\u003e Pneumatic, self-centering\u003c\/p\u003e\n        \u003cp\u003eQuick and secure tube clamping for repeatable precision.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eAutomation:\u003c\/strong\u003e Exchange table, optional auto sheet load\/unload, tube bundle loader\u003c\/p\u003e\n        \u003cp\u003eSupports lights-out operation and high-mix\/low-volume production.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eSafety:\u003c\/strong\u003e Full enclosure, light curtains\u003c\/p\u003e\n        \u003cp\u003eMeets modern safety requirements for North American fabrication shops.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eSoftware:\u003c\/strong\u003e Nesting\/CAD import (DXF\/STEP)\u003c\/p\u003e\n        \u003cp\u003eSimplifies programming and part flow from engineering to the shop floor.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser source options:\u003c\/strong\u003e IPG, MAX Photonics, Raycus\u003c\/p\u003e\n        \u003cp\u003eSelect the source to match your budget and service preferences.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003eThis combined plate and tube fiber laser is designed as a flexible cell for shops needing to process both flat sheet and long tube profiles in one system. It fits well alongside press brakes, saws, and welding stations for a complete fabrication workflow.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eFlat parts: brackets, panels, frames, gussets, covers, enclosures\u003c\/li\u003e\n      \u003cli\u003eTube parts: handrails, machine frames, supports, structural members up to 8in diameter and 20ft length\u003c\/li\u003e\n      \u003cli\u003eIndustries: general fabrication, contract manufacturing, machinery, metal furniture, construction, OEMs\u003c\/li\u003e\n      \u003cli\u003eHigh-mix\/low-volume jobs, prototypes, and repeat production runs\u003c\/li\u003e\n      \u003cli\u003eSupports integration with press brakes, welding cells, and downstream finishing\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003eConfigure your Umprotech system to match your workflow and automation needs. Choose from multiple automation packages and laser source options to optimize for throughput or flexibility.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBase Line:\u003c\/strong\u003e Standard 5x10ft plate bed, 20ft tube module, 8in chuck, exchange table\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eAuto Sheet Load\/Unload:\u003c\/strong\u003e Automated sheet handling for higher throughput and reduced manual labor\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eAuto Sheet L\/U + Tube Bundle Loader:\u003c\/strong\u003e Full automation for both plate and tube, ideal for lights-out production\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eLaser source:\u003c\/strong\u003e IPG, MAX Photonics, or Raycus\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eTube beveling (option):\u003c\/strong\u003e Ready for future upgrade\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eScrap conveyor and fume extraction ports:\u003c\/strong\u003e Included in all configurations\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003eWe work closely with US fabricators to ensure a smooth installation, from pre-install checks (power, floor, access) to workflow planning. Our team can review your parts and material mix to confirm fit and recommend the right automation package.\u003c\/p\u003e\n    \u003cp\u003eSupport includes training on nesting, programming, and safe operation. We help your team ramp up quickly, whether you’re running prototypes or full production.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003ePre-install planning for power, floor space, and material flow\u003c\/li\u003e\n      \u003cli\u003eApplication review for plate and tube jobs\u003c\/li\u003e\n      \u003cli\u003eOperator and programmer training included\u003c\/li\u003e\n      \u003cli\u003eOngoing support for automation, software, and maintenance\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eNext step: Send us a few sample parts (DXF\/STEP\/PDF) and we’ll confirm fit, cycle time, and recommend the best configuration for your shop.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Base Line","offer_id":52967298433390,"sku":"UCPT-5x10-8KW-T20FT-C8IN-BASE","price":299900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Sheet Load\/Unload","offer_id":52967298466158,"sku":"UCPT-5x10-8KW-T20FT-C8IN-SLU","price":374900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Sheet L\/U + Tube Bundle Loader","offer_id":52967298498926,"sku":"UCPT-5x10-8KW-T20FT-C8IN-SLU-TBL","price":464900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/3efe2098-60dc-45c4-b923-446ad306a2d4_7ea9f461-32ce-4e05-91af-0f7d0dda9353.png?v=1779687289"},{"product_id":"umprotech-combined-plate-tube-laser-5x10ft-6kw-tube24ft-8in-chuck","title":"Umprotech Combined Plate \u0026 Tube Fiber Laser 5x10ft, 6kW, Tube 24ft, 8in Chuck","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eUmprotech Combined Plate \u0026amp; Tube Fiber Laser – 5x10ft Bed, 6kW, 24ft Tube, 8in Chuck\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003eEngineered for US job shops and OEMs needing high-mix plate and tube cutting in one footprint. The Umprotech combined fiber laser delivers 6kW cutting power, a 5x10ft exchange table, and a 24ft tube module with an 8 inch servo chuck for maximum versatility and throughput.\u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003ePlate:\u003c\/strong\u003e 5x10ft · \u003cstrong\u003eLaser:\u003c\/strong\u003e 6kW · \u003cstrong\u003eTube:\u003c\/strong\u003e 24ft · \u003cstrong\u003eChuck:\u003c\/strong\u003e 8 in servo\u003c\/p\u003e\n  \u003c\/header\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e5x10ft plate capacity with exchange table supports standard US sheet sizes and high-volume workflows.\u003c\/li\u003e\n      \u003cli\u003e6kW fiber laser source (IPG \/ MAX Photonics \/ Raycus) handles a broad range of mild steel, stainless, and aluminum thicknesses.\u003c\/li\u003e\n      \u003cli\u003e24ft tube cutting module with 8 inch servo chuck enables precision processing of long tubes and profiles.\u003c\/li\u003e\n      \u003cli\u003eAutofocus cutting head and pneumatic self-centering chuck streamline setup and reduce manual intervention.\u003c\/li\u003e\n      \u003cli\u003eOptional automation: auto sheet load\/unload and tube bundle loader for lights-out operation.\u003c\/li\u003e\n      \u003cli\u003eIntegrated scrap conveyor, fume extraction ports, and full safety enclosure for clean, safe shop integration.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003ePlate working area:\u003c\/strong\u003e 5x10ft\u003c\/p\u003e\n        \u003cp\u003eAccommodates standard 60\" x 120\" sheets for efficient nesting and minimal handling.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6kW fiber\u003c\/p\u003e\n        \u003cp\u003eSupports fast cutting of steel, stainless, and aluminum across a wide thickness range.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eTube module length:\u003c\/strong\u003e 24ft\u003c\/p\u003e\n        \u003cp\u003eProcesses long tubes and profiles for frames, rails, and structural components.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eTube chuck:\u003c\/strong\u003e 8 inch servo\u003c\/p\u003e\n        \u003cp\u003eHandles round, square, and rectangular tubes up to 8\" diameter\/width with precision clamping.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eAutomation:\u003c\/strong\u003e Exchange table, optional auto sheet load\/unload, tube bundle loader\u003c\/p\u003e\n        \u003cp\u003eBoosts throughput and enables lights-out production.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Autofocus\u003c\/p\u003e\n        \u003cp\u003eReduces setup time and maintains cut quality across varying thicknesses.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eSafety:\u003c\/strong\u003e Full enclosure, light curtains\u003c\/p\u003e\n        \u003cp\u003eMeets shop safety requirements and supports clean operation.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eSoftware:\u003c\/strong\u003e Nesting\/CAD import (DXF\/STEP)\u003c\/p\u003e\n        \u003cp\u003eSimplifies programming and supports high-mix part production.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003eThis combined plate and tube fiber laser is designed for fabrication cells, contract manufacturers, and OEMs seeking to consolidate flat and tubular cutting in one system. Ideal for high-mix, low-volume jobs or repeat production runs.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eBrackets, panels, and enclosures from 5x10ft sheets\u003c\/li\u003e\n      \u003cli\u003eFrames, rails, and structural members from tubes up to 24ft and 8\" diameter\u003c\/li\u003e\n      \u003cli\u003eHVAC components, machinery parts, and custom profiles\u003c\/li\u003e\n      \u003cli\u003ePrototyping and short runs for job shops\u003c\/li\u003e\n      \u003cli\u003eIntegration with downstream bending, welding, or assembly cells\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003eConfigure the Umprotech combined laser to match your workflow and automation needs. Three automation packages available:\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBase Line:\u003c\/strong\u003e 5x10ft exchange table, manual load\/unload\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eAuto Sheet Load\/Unload:\u003c\/strong\u003e Automated sheet handling for increased throughput\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eAuto Sheet L\/U + Tube Bundle Loader:\u003c\/strong\u003e Full automation for both plate and tube, supporting continuous operation\u003c\/li\u003e\n      \u003cli\u003eChoice of fiber laser source: IPG, MAX Photonics, or Raycus\u003c\/li\u003e\n      \u003cli\u003eTube bevel-ready option for advanced fabrication needs\u003c\/li\u003e\n      \u003cli\u003eStandard safety enclosure and light curtains included on all models\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003eWe work closely with US job shops and OEMs to ensure a smooth installation. Our team reviews your material flow, floor space, and part mix to confirm the right fit before purchase. We assist with programming, nesting strategies, and basic automation setup.\u003c\/p\u003e\n    \u003cp\u003eTraining and commissioning are coordinated to get your team productive quickly—whether you're upgrading from standalone lasers or integrating into a larger fabrication cell.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003ePre-install planning: power, floor, safety, and workflow\u003c\/li\u003e\n      \u003cli\u003eSample part review (DXF\/STEP) to confirm capability and cycle times\u003c\/li\u003e\n      \u003cli\u003eOn-site training and basic program support\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eNext step: Send us your sample parts or project requirements, and we’ll confirm fit, cycle time, and recommend the right configuration for your shop.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Base Line","offer_id":52967298826606,"sku":"UCPT-5x10-6KW-T24FT-C8IN-BASE","price":271900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Sheet Load\/Unload","offer_id":52967298859374,"sku":"UCPT-5x10-6KW-T24FT-C8IN-SLU","price":346900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Sheet L\/U + Tube Bundle Loader","offer_id":52967298892142,"sku":"UCPT-5x10-6KW-T24FT-C8IN-SLU-TBL","price":436900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/3efe2098-60dc-45c4-b923-446ad306a2d4_7ea9f461-32ce-4e05-91af-0f7d0dda9353.png?v=1779687289"},{"product_id":"umprotech-combined-plate-tube-laser-5x10ft-6kw-tube20ft-12in-chuck","title":"UmproTech 6kW 5x10 Plate and Tube Fiber Laser","description":"\u003ch2\u003eUmproTech 6kW 5x10 Plate and Tube Fiber Laser\u003c\/h2\u003e\u003cp\u003eThe UmproTech 6kW 5x10 plate and tube fiber laser is built for U.S. fabrication shops, manufacturers, job shops, trailer builders, machinery builders, and purchasing teams that need both flat sheet cutting and tube cutting in one production cell.\u003c\/p\u003e\u003cp\u003eThis is a high-value equipment package. Buyers should review sheet work, tube work, material thickness, tube profile, automation level, gas strategy, compressor or nitrogen plan, floor layout, unloading, installation, operator training, warranty expectations, documentation, and financing options for qualified buyers before final approval.\u003c\/p\u003e\u003ch3\u003eBest Fit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFabrication shops cutting both flat sheet and tube or pipe parts\u003c\/li\u003e\n\u003cli\u003eManufacturers producing frames, brackets, guards, rails, enclosures, machinery parts, and structural assemblies\u003c\/li\u003e\n\u003cli\u003eJob shops that want one flexible laser cell instead of separate sheet and tube equipment\u003c\/li\u003e\n\u003cli\u003ePurchasing teams preparing RFQs, project review, delivered quote review, financing review, or internal approval\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eConfiguration Options\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Line:\u003c\/strong\u003e plate and tube cutting package for shops starting with a combined workflow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto Sheet Load\/Unload:\u003c\/strong\u003e stronger fit for buyers focused on higher flat-sheet throughput\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto Sheet L\/U + Tube Bundle Loader:\u003c\/strong\u003e best fit for higher-volume shops that need more automation on both sheet and tube work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Buying Factors\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6kW power:\u003c\/strong\u003e strong production balance for sheet and tube cutting applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5x10 sheet table:\u003c\/strong\u003e useful for common U.S. sheet formats and efficient nesting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 ft tube capacity:\u003c\/strong\u003e supports many structural, frame, rack, rail, and fabrication applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 in chuck:\u003c\/strong\u003e important for larger tube and profile capability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomation:\u003c\/strong\u003e loader and bundle options should be matched to volume, labor, floor space, and production goals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRFQ Details That Help\u003c\/h3\u003e\u003cp\u003eSend sheet material, sheet thickness, common sheet size, tube shape, tube size, wall thickness, tube length, production volume, automation preference, delivery ZIP code, shop power, gas or compressor plan, installation needs, training needs, and target timeline.\u003c\/p\u003e\u003ch3\u003eBuyer Support\u003c\/h3\u003e\u003cp\u003eAvailable support may include application review, automation option review, delivered quote preparation, gas and support equipment planning, layout discussion, startup coordination, operator training guidance, warranty review, documentation support, and financing discussion for qualified buyers.\u003c\/p\u003e\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFinal configuration, automation package, availability, freight, taxes, unloading, installation, training, documentation, warranty, and site requirements should be confirmed before invoice. Financing is subject to buyer qualification, lender review, and written terms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNext step:\u003c\/strong\u003e Request a delivered quote with your sheet work, tube work, production volume, automation preference, delivery ZIP code, and training requirements.\u003c\/p\u003e","brand":"Umprotech","offers":[{"title":"Base Line","offer_id":52967298990446,"sku":"UCPT-5x10-6KW-T20FT-C12IN-BASE","price":269900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Sheet Load\/Unload","offer_id":52967299023214,"sku":"UCPT-5x10-6KW-T20FT-C12IN-SLU","price":344900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Sheet L\/U + Tube Bundle Loader","offer_id":52967299055982,"sku":"UCPT-5x10-6KW-T20FT-C12IN-SLU-TBL","price":434900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/3efe2098-60dc-45c4-b923-446ad306a2d4_7ea9f461-32ce-4e05-91af-0f7d0dda9353.png?v=1779687289"},{"product_id":"umprotech-combined-plate-tube-laser-5x10ft-8kw-tube20ft-12in-chuck","title":"Umprotech 5x10ft Plate \u0026 Tube Fiber Laser, 8kW, 20ft Tube, 12in Chuck","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eUmprotech 5x10ft Plate \u0026amp; Tube Fiber Laser – 8kW, 20ft Tube, 12in Chuck\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003eEngineered for US job shops and OEMs needing high-mix flat and tube cutting, the Umprotech combined fiber laser delivers 8kW cutting power across a 5x10ft plate bed and a 20ft tube module with a 12 inch servo chuck. Designed for throughput, flexibility, and integration into busy fabrication cells.\u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\n      \u003cstrong\u003ePlate bed:\u003c\/strong\u003e 5x10ft · \u003cstrong\u003eLaser power:\u003c\/strong\u003e 8kW · \u003cstrong\u003eTube:\u003c\/strong\u003e 20ft, 12in chuck\n    \u003c\/p\u003e\n  \u003c\/header\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e8kW fiber laser source for fast, reliable cutting of thick and thin materials\u003c\/li\u003e\n      \u003cli\u003e5x10ft plate bed with exchange table maximizes flat part throughput and minimizes idle time\u003c\/li\u003e\n      \u003cli\u003e20ft tube cutting module with 12 inch servo chuck handles large profiles and long stock\u003c\/li\u003e\n      \u003cli\u003eAutofocus cutting head and pneumatic self-centering chuck reduce setup time and operator intervention\u003c\/li\u003e\n      \u003cli\u003eIntegrated scrap conveyor and fume extraction ports support clean, efficient operation\u003c\/li\u003e\n      \u003cli\u003eOptional automation packages for sheet load\/unload and tube bundle loading scale with your production needs\u003c\/li\u003e\n      \u003cli\u003eSafety enclosure and light curtains included for operator protection and compliance\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 8kW\u003c\/p\u003e\n        \u003cp\u003eHandles a wide range of metals and thicknesses for both flat and tube cutting.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003ePlate bed size:\u003c\/strong\u003e 5x10ft\u003c\/p\u003e\n        \u003cp\u003eAccommodates standard US sheet sizes for panels, brackets, and structural parts.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eTube cutting module:\u003c\/strong\u003e 20ft length\u003c\/p\u003e\n        \u003cp\u003eProcesses long tubes and profiles for frames, supports, and assemblies.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eTube chuck:\u003c\/strong\u003e 12 inch servo-driven, pneumatic self-centering\u003c\/p\u003e\n        \u003cp\u003eSecurely clamps round, square, and rectangular tubes up to 12 inches in diameter.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Autofocus\u003c\/p\u003e\n        \u003cp\u003eAutomatic height adjustment for consistent cut quality across varying materials and thicknesses.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eSources available:\u003c\/strong\u003e IPG \/ MAX Photonics \/ Raycus\u003c\/p\u003e\n        \u003cp\u003eChoose from leading fiber laser source brands to match your process and budget.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eAutomation:\u003c\/strong\u003e Exchange table, optional sheet\/tube loaders\u003c\/p\u003e\n        \u003cp\u003eBoosts productivity for both high-mix and repeat production.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eSafety:\u003c\/strong\u003e Full enclosure, light curtains\u003c\/p\u003e\n        \u003cp\u003eMeets US safety requirements for laser operations.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eSoftware:\u003c\/strong\u003e Nesting\/CAD import (DXF\/STEP)\u003c\/p\u003e\n        \u003cp\u003eSimplifies programming and integrates with your existing CAD\/CAM workflow.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003eThis combined plate and tube fiber laser is ideal as a standalone cutting cell or as part of an integrated fabrication line with press brakes, saws, and welding cells. It is built for shops handling a mix of flat parts and tubular components.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eFlat parts: panels, brackets, gussets, covers, enclosures\u003c\/li\u003e\n      \u003cli\u003eTube parts: frames, supports, handrails, structural members up to 20ft and 12in diameter\u003c\/li\u003e\n      \u003cli\u003eIndustries: metal fabrication, machinery, contract manufacturing, OEMs, job shops\u003c\/li\u003e\n      \u003cli\u003eSupports high-mix\/low-volume runs and repeat production\u003c\/li\u003e\n      \u003cli\u003eBevel-ready tube cutting (option) for advanced assembly prep\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003eConfigure the Umprotech combined laser to match your workflow and automation needs. Multiple automation packages and laser source brands are available.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003eBase Line: manual load\/unload, exchange table, full enclosure\u003c\/li\u003e\n      \u003cli\u003eAuto Sheet Load\/Unload: automated sheet handling for higher throughput\u003c\/li\u003e\n      \u003cli\u003eAuto Sheet L\/U + Tube Bundle Loader: full automation for both plate and tube loading\u003c\/li\u003e\n      \u003cli\u003eLaser source options: IPG, MAX Photonics, Raycus\u003c\/li\u003e\n      \u003cli\u003eTube bevel cutting (option)\u003c\/li\u003e\n      \u003cli\u003eIntegrated scrap conveyor and fume extraction ports\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003eWe support US fabricators through every phase—from pre-install planning (floor layout, power, material flow) to commissioning and training. Our team reviews your parts, materials, and thickness ranges to confirm fit and recommend the right configuration.\u003c\/p\u003e\n    \u003cp\u003eWe assist with initial programming, nesting, and workflow integration so your team is productive quickly. Ongoing support ensures uptime and smooth operation as your production evolves.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003ePre-install checks: power, floor space, safety, and access\u003c\/li\u003e\n      \u003cli\u003eSample part review and process fit confirmation\u003c\/li\u003e\n      \u003cli\u003eOperator training and basic program setup\u003c\/li\u003e\n      \u003cli\u003eIntegration guidance for press brakes, saws, and welding cells\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eNext step: Send us your sample part files (DXF\/STEP\/PDF) and we’ll confirm fit, cycle time, and the right automation package for your workflow.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Base Line","offer_id":52967299154286,"sku":"UCPT-5x10-8KW-T20FT-C12IN-BASE","price":309900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Sheet Load\/Unload","offer_id":52967299187054,"sku":"UCPT-5x10-8KW-T20FT-C12IN-SLU","price":384900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Sheet L\/U + Tube Bundle Loader","offer_id":52967299219822,"sku":"UCPT-5x10-8KW-T20FT-C12IN-SLU-TBL","price":474900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/3efe2098-60dc-45c4-b923-446ad306a2d4_7ea9f461-32ce-4e05-91af-0f7d0dda9353.png?v=1779687289"},{"product_id":"umprotech-combined-plate-tube-laser-6x12ft-6kw-tube20ft-8in-chuck","title":"Umprotech Combined Plate \u0026 Tube Fiber Laser 6x12ft, 6kW, Tube 20ft, 8in Chuck","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eUmprotech Combined Plate \u0026amp; Tube Fiber Laser – 6x12ft Bed, 6kW, 20ft Tube, 8in Chuck\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003eHigh-productivity fiber laser system engineered for US fabrication shops and OEMs needing both flat plate and tube cutting. Handles 6x12ft sheets with a 6kW fiber source and processes tubes up to 20ft long with an 8 inch servo chuck. Built for flexible part mix, fast changeovers, and reliable uptime in demanding environments.\u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\n      \u003cstrong\u003eBed:\u003c\/strong\u003e 6x12ft · \u003cstrong\u003eLaser Power:\u003c\/strong\u003e 6kW · \u003cstrong\u003eTube:\u003c\/strong\u003e 20ft, 8in chuck\n    \u003c\/p\u003e\n  \u003c\/header\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003eCombined flat and tube cutting: 6x12ft plate bed plus 20ft tube module with 8 inch servo chuck for maximum versatility.\u003c\/li\u003e\n      \u003cli\u003e6kW fiber laser source (IPG \/ MAX Photonics \/ Raycus) delivers high-speed cutting in steel, stainless, and aluminum.\u003c\/li\u003e\n      \u003cli\u003eExchange table enables fast sheet changeovers to keep throughput high in production runs or job shop environments.\u003c\/li\u003e\n      \u003cli\u003eAutofocus cutting head and pneumatic self-centering chuck simplify setup and boost repeatability across part types.\u003c\/li\u003e\n      \u003cli\u003eFull safety enclosure and light curtains included for operator protection and code compliance.\u003c\/li\u003e\n      \u003cli\u003eAutomation options: add auto sheet load\/unload or tube bundle loader to reduce manual handling and increase lights-out potential.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003ePlate bed size:\u003c\/strong\u003e 6x12ft\u003c\/p\u003e\n        \u003cp\u003eProcesses full-size sheets for large panels, frames, and nested parts.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6kW fiber\u003c\/p\u003e\n        \u003cp\u003eEfficiently cuts a wide range of metals; source options include IPG, MAX Photonics, and Raycus.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eTube cutting module:\u003c\/strong\u003e 20ft length, 8 inch servo chuck\u003c\/p\u003e\n        \u003cp\u003eHandles long tubes and profiles up to 8 inches in diameter with stable, servo-driven clamping.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eExchange table:\u003c\/strong\u003e Yes\u003c\/p\u003e\n        \u003cp\u003eMinimizes downtime between sheets for continuous production.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eAutomation options:\u003c\/strong\u003e Auto sheet load\/unload, tube bundle loader\u003c\/p\u003e\n        \u003cp\u003eScalable automation for different shop sizes and throughput needs.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eSafety features:\u003c\/strong\u003e Full enclosure, light curtains\u003c\/p\u003e\n        \u003cp\u003eMeets safety requirements for US fabrication environments.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eSoftware:\u003c\/strong\u003e Nesting\/CAD import (DXF\/STEP)\u003c\/p\u003e\n        \u003cp\u003eSimplifies workflow from design to cut, supporting high-mix production.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003eThis combined plate and tube fiber laser is ideal as a standalone cutting cell or as part of an integrated fabrication line with press brakes, saws, and welding fixtures. Designed for high-mix, low-volume job shops, OEMs, and contract manufacturers needing both flat and tubular parts.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eFlat parts: panels, brackets, gussets, covers, machine bases\u003c\/li\u003e\n      \u003cli\u003eTube and profile parts: frames, supports, handrails, structural members up to 8 inch diameter, 20ft length\u003c\/li\u003e\n      \u003cli\u003eIndustries: metal fabrication, machinery, construction, HVAC, custom equipment\u003c\/li\u003e\n      \u003cli\u003eSupports rapid prototyping, repeat production, and flexible job sequencing\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003eConfigure the Umprotech combined laser to match your workflow and scale. Three automation packages are available to suit different production requirements:\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBase Line:\u003c\/strong\u003e Standard 6x12ft bed, 6kW source, 20ft tube module, manual sheet handling\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eAuto Sheet Load\/Unload:\u003c\/strong\u003e Adds automated sheet handling for higher throughput and less manual labor\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eAuto Sheet L\/U + Tube Bundle Loader:\u003c\/strong\u003e Full automation for both sheet and tube loading, ideal for lights-out or high-volume operations\u003c\/li\u003e\n      \u003cli\u003eTube bevel-ready option available for advanced fabrication needs\u003c\/li\u003e\n      \u003cli\u003eChoice of fiber laser source: IPG, MAX Photonics, or Raycus\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003eWe partner with US job shops and OEMs to ensure a smooth installation and fast ramp-up. Our team reviews your parts, material types, and floor plan to confirm fit and optimize workflow. We support pre-install checks (power, floor, access), and provide guidance on nesting, cut parameters, and automation setup.\u003c\/p\u003e\n    \u003cp\u003eOperator training and handover are included, so your team is productive quickly. We can also help integrate this system with press brakes, welding cells, and downstream processes.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003ePre-purchase part and material review\u003c\/li\u003e\n      \u003cli\u003eOn-site commissioning and basic programming support\u003c\/li\u003e\n      \u003cli\u003eOngoing technical assistance for maintenance and process optimization\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eNext step: Send us your sample parts or drawings (DXF\/STEP\/PDF) and we’ll confirm fit, cycle time, and the best automation package for your shop.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Base Line","offer_id":52967299711342,"sku":"UCPT-6x12-6KW-T20FT-C8IN-BASE","price":284900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Sheet Load\/Unload","offer_id":52967299744110,"sku":"UCPT-6x12-6KW-T20FT-C8IN-SLU","price":359900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Sheet L\/U + Tube Bundle Loader","offer_id":52967299776878,"sku":"UCPT-6x12-6KW-T20FT-C8IN-SLU-TBL","price":449900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/3efe2098-60dc-45c4-b923-446ad306a2d4_7ea9f461-32ce-4e05-91af-0f7d0dda9353.png?v=1779687289"},{"product_id":"umprotech-combined-plate-tube-laser-6x12ft-8kw-tube20ft-8in-chuck","title":"UmproTech 6x12 ft 8kW Combined Plate \u0026 Tube Fiber Laser – 20 ft Tube, 8 in Chuck","description":"\u003ch2\u003e6x12 ft 8kW Combined Plate \u0026amp; Tube Fiber Laser for U.S. Production Shops\u003c\/h2\u003e\u003cp\u003eThe UmproTech 6x12 ft 8kW combined plate and tube fiber laser is built for U.S. job shops, OEM cells, metal fabrication shops, machinery builders, trailer builders, structural fabricators, and manufacturers that need larger sheet capacity plus tube cutting in one production cell.\u003c\/p\u003e\u003cp\u003eThis system combines a 6x12 ft sheet cutting platform with a 20 ft tube module and 8 in chuck, giving shops one quote path for plate, tube, automation, installation, training, support, and financing.\u003c\/p\u003e\u003ch3\u003eBest Fit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eU.S. shops cutting larger flat sheet parts and tube work\u003c\/li\u003e\n\u003cli\u003eFabricators wanting one machine cell instead of separate sheet and tube equipment\u003c\/li\u003e\n\u003cli\u003eTrailer, frame, rack, guard, machinery, enclosure, and structural part production\u003c\/li\u003e\n\u003cli\u003eBuyers comparing 5x10 vs 6x12 plate capacity and 6kW vs 8kW laser power\u003c\/li\u003e\n\u003cli\u003eBusinesses that need a delivered quote including machine, automation, freight, rigging, installation, training, support, and financing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy Choose 6x12 ft\u003c\/h3\u003e\u003cp\u003eA 6x12 ft platform can be the better fit when your shop processes larger sheets, larger panels, longer parts, or wants more nesting flexibility than a 5x10 ft bed. It can reduce handling steps and improve workflow when larger blanks are common.\u003c\/p\u003e\u003ch3\u003eWhy Choose 8kW\u003c\/h3\u003e\u003cp\u003eAn 8kW fiber laser can provide stronger production headroom than 6kW while keeping the package more controlled than 10kW. It is a practical middle point for shops that need higher output, mixed sheet thickness, and long-term capacity.\u003c\/p\u003e\u003ch3\u003eConfiguration Options\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Line:\u003c\/strong\u003e plate cutting with exchange table and manual tube loading.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto Sheet Load\/Unload:\u003c\/strong\u003e stronger option for shops focused on higher flat-sheet throughput.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto Sheet L\/U + Tube Bundle Loader:\u003c\/strong\u003e strongest package for shops that want more automation on both sheet and tube work.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuote Checklist\u003c\/h3\u003e\u003cp\u003eFor the most accurate delivered quote, send these details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSheet material, thickness range, and common sheet size\u003c\/li\u003e\n\u003cli\u003eTube shapes, tube diameter\/profile size, wall thickness, and tube length\u003c\/li\u003e\n\u003cli\u003eTypical part mix: sheet only, tube only, or mixed production\u003c\/li\u003e\n\u003cli\u003eProduction volume, shift schedule, and throughput goals\u003c\/li\u003e\n\u003cli\u003eAutomation needs: manual loading, sheet automation, tube bundle loading, or both\u003c\/li\u003e\n\u003cli\u003eAvailable shop power, gas strategy, compressor\/extraction needs, floor space, and rigging path\u003c\/li\u003e\n\u003cli\u003eDelivery location and target timeline\u003c\/li\u003e\n\u003cli\u003eWhether you need installation, startup, operator training, support, or financing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAvailable Quote Add-Ons\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFinal machine configuration review\u003c\/li\u003e\n\u003cli\u003eAutomation package recommendation\u003c\/li\u003e\n\u003cli\u003eFreight and delivered-price estimate\u003c\/li\u003e\n\u003cli\u003eGas, compressor, extraction, and workflow planning\u003c\/li\u003e\n\u003cli\u003eRigging, unloading, and floor placement planning\u003c\/li\u003e\n\u003cli\u003eInstallation, startup, and operator training options\u003c\/li\u003e\n\u003cli\u003eWarranty, parts, and service support review\u003c\/li\u003e\n\u003cli\u003eFinancing options for qualified buyers, typically with 24-60 month options, subject to approval and lender terms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant Before Purchase\u003c\/h3\u003e\u003cp\u003eFinal pricing, stock, freight, taxes, configuration, automation, accessories, gas requirements, compressor requirements, electrical requirements, installation requirements, and delivery timing must be confirmed before invoice. Product images and listed configuration may vary from the final quoted package.\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eShould I choose 5x10 or 6x12?\u003c\/strong\u003e\u003cbr\u003eChoose 6x12 when your shop cuts larger sheets, larger panels, or wants more nesting flexibility. Choose 5x10 when most work fits standard sheet size and floor space is tighter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I choose 8kW or 10kW?\u003c\/strong\u003e\u003cbr\u003eChoose 8kW for strong production with controlled package cost. Choose 10kW when you need maximum throughput and stronger long-term headroom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I request a delivered quote?\u003c\/strong\u003e\u003cbr\u003eYes. The best quote includes your sheet work, tube work, automation needs, shop power, gas plan, delivery location, installation\/training needs, and timeline.\u003c\/p\u003e","brand":"Umprotech","offers":[{"title":"Base Line","offer_id":52967299875182,"sku":"UCPT-6x12-8KW-T20FT-C8IN-BASE","price":324900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Sheet Load\/Unload","offer_id":52967299907950,"sku":"UCPT-6x12-8KW-T20FT-C8IN-SLU","price":399900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Sheet L\/U + Tube Bundle Loader","offer_id":52967299940718,"sku":"UCPT-6x12-8KW-T20FT-C8IN-SLU-TBL","price":489900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/ChatGPTImageMay24_2026_10_31_06PM.png?v=1779687078"},{"product_id":"umprotech-combined-plate-tube-laser-6x12ft-6kw-tube24ft-8in-chuck","title":"Umprotech Combined Plate \u0026 Tube Fiber Laser 6x12ft 6kW, Tube 24ft, 8in Chuck","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eUmprotech Combined Plate \u0026amp; Tube Fiber Laser – 6x12ft Bed, 6kW, 24ft Tube, 8in Chuck\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003eA high-capacity fiber laser system engineered for US job shops and OEMs needing both flat sheet and tube cutting. The 6x12ft exchange table, 6kW fiber source, and 24ft tube module with 8 inch servo chuck deliver serious throughput and flexibility for mixed part production.\u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\n      \u003cstrong\u003eSheet bed:\u003c\/strong\u003e 6x12ft · \u003cstrong\u003eLaser power:\u003c\/strong\u003e 6kW · \u003cstrong\u003eTube:\u003c\/strong\u003e 24ft, 8in chuck\n    \u003c\/p\u003e\n  \u003c\/header\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e6x12ft exchange table maximizes sheet throughput and fits standard US plate sizes.\u003c\/li\u003e\n      \u003cli\u003e6kW fiber laser source (IPG, MAX Photonics, or Raycus) cuts a wide range of metals with high speed and edge quality.\u003c\/li\u003e\n      \u003cli\u003eIntegrated 24ft tube module with 8 inch servo chuck handles large tubes and profiles for structural, frame, and fabrication work.\u003c\/li\u003e\n      \u003cli\u003eAutofocus cutting head and pneumatic self-centering chuck simplify setups and maintain consistency across jobs.\u003c\/li\u003e\n      \u003cli\u003eAvailable automation packages: base, auto sheet load\/unload, and tube bundle loader for lights-out production.\u003c\/li\u003e\n      \u003cli\u003eSafety enclosure and light curtains included for operator protection and compliance.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eSheet cutting bed:\u003c\/strong\u003e 6x12ft (exchange table)\u003c\/p\u003e\n        \u003cp\u003eHandles standard US sheet and plate sizes for efficient nesting and material flow.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6kW fiber (IPG \/ MAX Photonics \/ Raycus)\u003c\/p\u003e\n        \u003cp\u003eDelivers fast cutting speeds and high-quality edges across steel, stainless, and aluminum.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eTube cutting module:\u003c\/strong\u003e 24ft length, 8 inch servo chuck\u003c\/p\u003e\n        \u003cp\u003eProcesses long tubes and profiles up to 8 inches in diameter for frames, supports, and fabrication work.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Autofocus\u003c\/p\u003e\n        \u003cp\u003eAutomatic focal adjustment for different materials and thicknesses, reducing manual intervention.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eTube handling:\u003c\/strong\u003e Pneumatic self-centering chuck, support wheels, steady rests\u003c\/p\u003e\n        \u003cp\u003eEnsures accurate rotation and support for long or heavy tube stock.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eSafety:\u003c\/strong\u003e Full enclosure, light curtains\u003c\/p\u003e\n        \u003cp\u003eMeets US shop safety requirements and supports clean, compliant operation.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eSoftware:\u003c\/strong\u003e Nesting\/CAD import (DXF\/STEP)\u003c\/p\u003e\n        \u003cp\u003eSimplifies programming and part flow from engineering to production.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eAdditional features:\u003c\/strong\u003e Scrap conveyor, fume extraction ports\u003c\/p\u003e\n        \u003cp\u003eImproves uptime and shop environment by managing waste and fumes.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003eThis combined plate and tube fiber laser is ideal for shops needing to cut both flat sheet and tubular parts without separate machines. Streamlines flow from raw material to finished component in fabrication, contract manufacturing, and OEM environments.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eFlat parts: brackets, panels, gussets, covers, enclosures from sheet\/plate up to 6x12ft\u003c\/li\u003e\n      \u003cli\u003eTubular parts: frames, supports, handrails, structural members up to 24ft long and 8in diameter\u003c\/li\u003e\n      \u003cli\u003eIndustries: metal fabrication, machinery, contract manufacturing, job shops, OEMs\u003c\/li\u003e\n      \u003cli\u003eSupports high-mix\/low-volume runs, repeat production, and prototyping\u003c\/li\u003e\n      \u003cli\u003eIntegrates with downstream bending, welding, and assembly cells\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003eConfigure your Umprotech combined laser to match your throughput and automation needs. Multiple automation packages and fiber sources available.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003eBase Line: manual load\/unload for flexible job shop operation\u003c\/li\u003e\n      \u003cli\u003eAuto Sheet Load\/Unload: increases sheet throughput and reduces manual handling\u003c\/li\u003e\n      \u003cli\u003eAuto Sheet L\/U + Tube Bundle Loader: full automation for both sheets and tube, ideal for higher volume or lights-out production\u003c\/li\u003e\n      \u003cli\u003eLaser source options: IPG, MAX Photonics, or Raycus\u003c\/li\u003e\n      \u003cli\u003eTube bevel-ready option for advanced fabrication (upon request)\u003c\/li\u003e\n      \u003cli\u003eStandard safety enclosure and light curtains included\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003eWe work closely with US job shops and OEMs to ensure a smooth transition from quoting to production. Our team reviews your material flow, floor space, and safety needs before installation, and can help validate part fit and cycle times.\u003c\/p\u003e\n    \u003cp\u003eWe support your team with programming basics, nesting strategies, and machine handover so you’re productive from day one. Training and commissioning are coordinated for minimal downtime.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003ePre-install review: power, floor, access, safety\u003c\/li\u003e\n      \u003cli\u003eSample part and nesting validation (DXF\/STEP)\u003c\/li\u003e\n      \u003cli\u003eOperator and programming training available\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eNext step: send us your sample parts or project requirements, and we’ll confirm fit, cycle time, and the best automation package for your shop.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Base Line","offer_id":52967300301166,"sku":"UCPT-6x12-6KW-T24FT-C8IN-BASE","price":296900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Sheet Load\/Unload","offer_id":52967300333934,"sku":"UCPT-6x12-6KW-T24FT-C8IN-SLU","price":371900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Sheet L\/U + Tube Bundle Loader","offer_id":52967300366702,"sku":"UCPT-6x12-6KW-T24FT-C8IN-SLU-TBL","price":461900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/3efe2098-60dc-45c4-b923-446ad306a2d4_7ea9f461-32ce-4e05-91af-0f7d0dda9353.png?v=1779687289"},{"product_id":"umprotech-combined-plate-tube-laser-6x12ft-6kw-tube20ft-12in-chuck","title":"Umprotech Combined Plate \u0026 Tube Fiber Laser 6x12ft, 6kW, Tube 20ft, 12in Chuck","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eUmprotech Combined Plate \u0026amp; Tube Fiber Laser – 6x12ft Bed, 6kW, 20ft Tube, 12in Chuck\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003eEngineered for US job shops and OEMs needing flexible, high-throughput cutting of both flat sheet and long tube profiles. This combined fiber laser system delivers true dual-purpose productivity with a 6x12ft plate bed, 6kW fiber source, and 20ft tube module with a 12 inch servo chuck. Ideal for shops looking to consolidate processes, maximize floor space, and handle a broad part mix with minimal changeover.\u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003ePlate Bed:\u003c\/strong\u003e 6x12ft · \u003cstrong\u003eLaser Power:\u003c\/strong\u003e 6kW · \u003cstrong\u003eTube:\u003c\/strong\u003e 20ft, 12in chuck\u003c\/p\u003e\n  \u003c\/header\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003eProcess both plate (6x12ft) and tube (up to 20ft, 12in diameter) on one machine—maximize utilization and shop flexibility.\u003c\/li\u003e\n      \u003cli\u003e6kW fiber laser source (IPG, MAX Photonics, or Raycus) handles a wide range of thicknesses and materials with fast, clean cuts.\u003c\/li\u003e\n      \u003cli\u003eExchange table for plate cutting supports high throughput and efficient material flow.\u003c\/li\u003e\n      \u003cli\u003eServo-driven 12 inch pneumatic self-centering chuck ensures secure, accurate tube processing—even on heavy profiles.\u003c\/li\u003e\n      \u003cli\u003eAutomation-ready: choose base, auto sheet load\/unload, or full auto with tube bundle loader to match your production needs.\u003c\/li\u003e\n      \u003cli\u003eSafety enclosure and light curtains included—meets demanding shop safety standards.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003ePlate working area:\u003c\/strong\u003e 6x12ft\u003c\/p\u003e\n        \u003cp\u003eSupports full-size sheets for structural, enclosure, and panel work.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6kW fiber\u003c\/p\u003e\n        \u003cp\u003eHigh power for fast cutting across mild steel, stainless, and aluminum (thickness range depends on material and source).\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eTube module:\u003c\/strong\u003e 20ft length, 12in servo chuck\u003c\/p\u003e\n        \u003cp\u003eProcesses round, square, and rectangular tubes up to 20ft long and 12 inches in diameter—ideal for frames, rails, and supports.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eAutomation:\u003c\/strong\u003e Exchange table (plate), options for auto sheet load\/unload and tube bundle loader\u003c\/p\u003e\n        \u003cp\u003eScalable automation to match part volume and labor strategy.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Autofocus\u003c\/p\u003e\n        \u003cp\u003eConsistent quality and fast changeover between material thicknesses.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eSafety:\u003c\/strong\u003e Full enclosure, light curtains\u003c\/p\u003e\n        \u003cp\u003eMeets US shop safety requirements for operator protection.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCAD import:\u003c\/strong\u003e DXF\/STEP nesting\u003c\/p\u003e\n        \u003cp\u003eStreamlined workflow from design to cut, supporting high-mix production.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003eThis combined plate and tube laser is a core asset for fabrication cells, contract manufacturers, and OEMs looking to integrate flat and tubular part production. Ideal for high-mix\/low-volume work or repeat runs where flexibility and quick changeovers drive ROI.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eFlat parts: brackets, panels, gussets, enclosures, base plates\u003c\/li\u003e\n      \u003cli\u003eTubular profiles: frames, rails, supports, structural members up to 20ft and 12in diameter\u003c\/li\u003e\n      \u003cli\u003eIndustries: general fabrication, machinery, structural steel, HVAC, job shops\u003c\/li\u003e\n      \u003cli\u003eSupports direct flow from laser to press brake, saw, and welding cells\u003c\/li\u003e\n      \u003cli\u003eHandles both prototypes and production batches with minimal setup time\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003eConfigure your system to match your workflow and production volume. All core specs—6x12ft bed, 6kW source, 20ft tube, 12in chuck—are standard. Automation and source options available to fit your needs.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003eBase Line: manual sheet load\/unload, exchange table, core safety features\u003c\/li\u003e\n      \u003cli\u003eAuto Sheet Load\/Unload: automated plate handling for higher throughput\u003c\/li\u003e\n      \u003cli\u003eAuto Sheet L\/U + Tube Bundle Loader: full automation for both plate and tube, minimizing manual intervention\u003c\/li\u003e\n      \u003cli\u003eSource options: IPG, MAX Photonics, or Raycus fiber laser\u003c\/li\u003e\n      \u003cli\u003eTube bevel cutting (option), support wheels\/steady rests for long tubes\u003c\/li\u003e\n      \u003cli\u003eIntegrated scrap conveyor and fume extraction ports\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003eWe partner with US job shops and OEMs to ensure a smooth transition—covering site prep, power requirements, and workflow integration. Our team reviews your part mix, thickness ranges, and automation needs to confirm the right fit before purchase.\u003c\/p\u003e\n    \u003cp\u003eWe provide training on setup, nesting, and maintenance, so your team is productive from day one. Ongoing support includes remote troubleshooting and application advice for both plate and tube cutting.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003ePre-installation review: floor space, power, material flow\u003c\/li\u003e\n      \u003cli\u003eApplication support: sample part review, nesting strategies, process optimization\u003c\/li\u003e\n      \u003cli\u003eOn-site and remote training for operators and programmers\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eNext step: send us sample parts (DXF\/STEP\/PDF) and we’ll confirm fit, cycle time, and best configuration for your workflow.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Base Line","offer_id":52967300465006,"sku":"UCPT-6x12-6KW-T20FT-C12IN-BASE","price":294900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Sheet Load\/Unload","offer_id":52967300497774,"sku":"UCPT-6x12-6KW-T20FT-C12IN-SLU","price":369900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Sheet L\/U + Tube Bundle Loader","offer_id":52967300530542,"sku":"UCPT-6x12-6KW-T20FT-C12IN-SLU-TBL","price":459900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/3efe2098-60dc-45c4-b923-446ad306a2d4_7ea9f461-32ce-4e05-91af-0f7d0dda9353.png?v=1779687289"},{"product_id":"umprotech-combined-plate-tube-laser-6x12ft-8kw-tube20ft-12in-chuck","title":"Umprotech Combined Plate \u0026 Tube Fiber Laser 6x12ft, 8kW, 20ft Tube, 12in Chuck","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eUmprotech Combined Plate \u0026amp; Tube Fiber Laser – 6x12ft Bed, 8kW, 20ft Tube, 12in Chuck\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003eEngineered for US fabrication shops and OEMs, this Umprotech system delivers high-speed fiber laser cutting for both plate and tube. With a 6x12ft plate bed, 8kW laser source, and integrated 20ft tube module with 12 inch servo chuck, it’s built for high-mix, high-throughput production in a single footprint.\u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\n      \u003cstrong\u003ePlate Bed:\u003c\/strong\u003e 6x12ft · \u003cstrong\u003eLaser Power:\u003c\/strong\u003e 8kW · \u003cstrong\u003eTube:\u003c\/strong\u003e 20ft, 12in chuck\n    \u003c\/p\u003e\n  \u003c\/header\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003eCut both flat plate (up to 6x12ft) and tube (up to 20ft, 12in diameter) on one machine—maximize shop flexibility and floor space.\u003c\/li\u003e\n      \u003cli\u003e8kW fiber laser source delivers fast, clean cuts on a wide range of metals and thicknesses, supporting both high-mix and repeat production.\u003c\/li\u003e\n      \u003cli\u003eServo-driven 12 inch pneumatic self-centering chuck ensures secure, accurate tube handling for round, square, and rectangular profiles.\u003c\/li\u003e\n      \u003cli\u003eExchange table on the plate bed minimizes downtime between sheets and boosts throughput in busy operations.\u003c\/li\u003e\n      \u003cli\u003eAutofocus cutting head and CAD\/CAM import (DXF\/STEP) simplify programming and reduce setup time for new jobs.\u003c\/li\u003e\n      \u003cli\u003eAvailable automation packages: from base machine to full auto sheet load\/unload and tube bundle loading—scale as your needs grow.\u003c\/li\u003e\n      \u003cli\u003eSafety enclosure and light curtains included for operator protection and compliance.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003ePlate cutting bed:\u003c\/strong\u003e 6x12ft\u003c\/p\u003e\n        \u003cp\u003eHandles standard US sheet sizes—ideal for panels, frames, and large components.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 8kW fiber\u003c\/p\u003e\n        \u003cp\u003eHigh power for fast cutting in steel, stainless, and aluminum (thickness range depends on material and application).\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eTube module:\u003c\/strong\u003e 20ft length, 12in servo chuck\u003c\/p\u003e\n        \u003cp\u003eAccommodates long tubes and profiles up to 12 inch diameter for structural, process, or architectural parts.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Autofocus\u003c\/p\u003e\n        \u003cp\u003eEnables rapid setup and consistent edge quality across different thicknesses and materials.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eAutomation:\u003c\/strong\u003e Exchange table, optional auto sheet load\/unload, tube bundle loader\u003c\/p\u003e\n        \u003cp\u003eChoose the right level of automation for your workflow and budget.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser source options:\u003c\/strong\u003e IPG, MAX Photonics, Raycus\u003c\/p\u003e\n        \u003cp\u003eReliable, globally supported fiber sources for consistent uptime.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eSafety:\u003c\/strong\u003e Full enclosure, light curtains\u003c\/p\u003e\n        \u003cp\u003eMeets modern shop safety standards and operator protection requirements.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003eThis combined plate and tube fiber laser is a versatile centerpiece for fabrication cells, laser job shops, and OEMs who need to process both sheet and tube in one workflow. It streamlines material flow from raw stock to finished part, supporting everything from prototypes to repeat production.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eFlat parts: brackets, panels, enclosures, base plates, frames\u003c\/li\u003e\n      \u003cli\u003eTube and profile: handrails, machine frames, supports, process piping, furniture, structural members\u003c\/li\u003e\n      \u003cli\u003eIndustries: metal fabrication, machinery, contract manufacturing, architectural, HVAC, general job shops\u003c\/li\u003e\n      \u003cli\u003eIdeal for high-mix\/low-volume work, short lead times, and flexible part nesting\u003c\/li\u003e\n      \u003cli\u003eIntegrates with downstream forming (press brakes), welding, and finishing cells\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003eConfigure your Umprotech system to match your shop's workflow and automation needs. All variants feature the same robust plate and tube cutting envelope, with scalable automation and reliable safety features.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBase Line:\u003c\/strong\u003e Standard exchange table, manual sheet and tube loading\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eAuto Sheet Load\/Unload:\u003c\/strong\u003e Automated sheet handling for higher throughput and reduced manual labor\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eAuto Sheet L\/U + Tube Bundle Loader:\u003c\/strong\u003e Full automation for both sheet and tube, ideal for lights-out or high-volume operations\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eTube bevel-ready (option):\u003c\/strong\u003e Upgrade path for bevel cutting on tubes\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eLaser source:\u003c\/strong\u003e Choice of IPG, MAX Photonics, or Raycus fiber modules\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e Full enclosure and light curtains standard\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003eWe partner with US job shops and OEMs to ensure a smooth transition from quote to production. Our team reviews your parts, material types, and shop layout to confirm fit and recommend the right configuration before purchase.\u003c\/p\u003e\n    \u003cp\u003eWe support installation planning (floor space, power, fume extraction), operator training, and initial programming—including nesting, DXF\/STEP import, and basic automation routines. Our goal: get your team productive quickly and keep your line running reliably.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003ePre-installation review: power, floor, safety, and access\u003c\/li\u003e\n      \u003cli\u003eSample part analysis to confirm fit and cycle times\u003c\/li\u003e\n      \u003cli\u003eTraining on programming, nesting, and maintenance\u003c\/li\u003e\n      \u003cli\u003eOngoing support for automation, upgrades, and integration with forming\/welding cells\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eNext step: send us your sample parts or project requirements. We’ll confirm fit, recommend options, and help position this system for maximum ROI in your workflow.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Base Line","offer_id":52967300596078,"sku":"UCPT-6x12-8KW-T20FT-C12IN-BASE","price":334900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Sheet Load\/Unload","offer_id":52967300628846,"sku":"UCPT-6x12-8KW-T20FT-C12IN-SLU","price":409900.0,"currency_code":"USD","in_stock":true},{"title":"Auto Sheet L\/U + Tube Bundle Loader","offer_id":52967300661614,"sku":"UCPT-6x12-8KW-T20FT-C12IN-SLU-TBL","price":499900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/3efe2098-60dc-45c4-b923-446ad306a2d4_7ea9f461-32ce-4e05-91af-0f7d0dda9353.png?v=1779687289"},{"product_id":"anchu-sheetcut-2060-pro","title":"ANCHU LASER SheetCut 2060 Pro • 6000W • 6.56x19.69 ft Fiber Laser","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eANCHU LASER SheetCut 2060 Pro • 6000W • 6.56x19.69 ft Open-Type Fiber Laser\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003eThe ANCHU SheetCut 2060 Pro is an open-type fiber laser designed for large-format sheet metal cutting. With a working bed of 79x236 in (2000×6000 mm) and up to 6000W laser power, it delivers reliable performance for US job shops, OEMs, and fabrication cells handling long or oversized parts.\u003c\/p\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003eEngineered for productivity and integration, this model supports thin-to-medium gauge materials, advanced nesting from DXF\/STEP, and comes ready for US electrical standards.\u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eWorking area:\u003c\/strong\u003e 79x236 in (2000×6000 mm) · \u003cstrong\u003eLaser power:\u003c\/strong\u003e 6000W · \u003cstrong\u003eOpen-type design\u003c\/strong\u003e\u003c\/p\u003e\n  \u003c\/header\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003eLarge-format bed (79x236 in \/ 2000×6000 mm) handles oversized sheets, beams, and structural profiles.\u003c\/li\u003e\n      \u003cli\u003e6000W fiber laser source delivers fast, clean cuts in thin-to-medium gauge materials.\u003c\/li\u003e\n      \u003cli\u003eOpen-type frame simplifies loading\/unloading for long or awkward parts, ideal for job shops with high-mix work.\u003c\/li\u003e\n      \u003cli\u003eAutofocus cutting head maintains optimal quality and throughput across varied thicknesses.\u003c\/li\u003e\n      \u003cli\u003eNesting from DXF\/STEP streamlines programming for prototypes, repeat jobs, and high-mix orders.\u003c\/li\u003e\n      \u003cli\u003eUS electrical package and integrated fume extraction ports support compliance and shop safety.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eWorking area:\u003c\/strong\u003e 79x236 in (2000×6000 mm)\u003c\/p\u003e\n        \u003cp\u003eAccommodates full-size sheets, long beams, and large-format parts without repositioning.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6000W\u003c\/p\u003e\n        \u003cp\u003eSuited for fast cutting in thin-to-medium gauge steel, stainless, and aluminum (material and thickness per application).\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eMachine type:\u003c\/strong\u003e Open-type fiber laser\u003c\/p\u003e\n        \u003cp\u003eProvides easy access for material handling and part removal, especially for long or heavy workpieces.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Autofocus\u003c\/p\u003e\n        \u003cp\u003eMaintains consistent edge quality and reduces manual adjustment across part runs.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eNesting \u0026amp; import:\u003c\/strong\u003e DXF\/STEP compatible\u003c\/p\u003e\n        \u003cp\u003eEnables direct import and nesting of customer part files for efficient programming.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser sources:\u003c\/strong\u003e IPG \/ MAX Photonics \/ Raycus\u003c\/p\u003e\n        \u003cp\u003eSelect from leading fiber laser brands to fit your process and budget.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eUS electrical package\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp\u003eConfigured for North American voltage and safety standards.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eFume extraction ports\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp\u003eSupports integration with shop dust and fume management systems.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eSafety interlocks\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp\u003eEnhances operator safety and compliance in open-frame environments.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003eThe SheetCut 2060 Pro is designed for high-mix fabrication, contract manufacturing, and OEMs requiring large or long-format laser cutting. It fits well as a standalone cell or as part of a laser-to-press-brake workflow.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eLarge panels, frames, and enclosures\u003c\/li\u003e\n      \u003cli\u003eBeams, structural elements, and long profiles\u003c\/li\u003e\n      \u003cli\u003eBrackets, gussets, and subassemblies for machinery and equipment\u003c\/li\u003e\n      \u003cli\u003eHVAC, metal fabrication, and general job shop parts\u003c\/li\u003e\n      \u003cli\u003ePrototyping and short-run production with frequent job changeovers\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003eThe SheetCut 2060 Pro is available in multiple power configurations and with a choice of fiber laser sources to match your production needs.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003eLaser power: 6000W (standard), 8000W (optional)\u003c\/li\u003e\n      \u003cli\u003eLaser source options: IPG, MAX Photonics, or Raycus\u003c\/li\u003e\n      \u003cli\u003eUS electrical package as standard\u003c\/li\u003e\n      \u003cli\u003eAutofocus cutting head included\u003c\/li\u003e\n      \u003cli\u003eIntegrated fume extraction ports and safety interlocks\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003eWe support US shops through every stage—from pre-install planning (power, floor space, material flow) to commissioning and operator training. Our team reviews your parts, materials, and nesting requirements to ensure the SheetCut 2060 Pro is the right fit for your workflow.\u003c\/p\u003e\n    \u003cp\u003eWe regularly work with job shops and OEMs managing high-mix, large-format cutting. We can assist with programming, nesting strategies, and integration with downstream press brakes or welding cells.\u003c\/p\u003e\n    \u003cp\u003eNext step: Send us your sample part files (DXF\/STEP\/PDF) and we’ll confirm fit, cycle time, and best configuration for your shop.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"ANCHU LASER","offers":[{"title":"6000W","offer_id":52968450752878,"sku":"AN-ANCHU-SHEETCUT-2060-PRO-6000W","price":239900.0,"currency_code":"USD","in_stock":true},{"title":"8000W","offer_id":52968450785646,"sku":"AN-ANCHU-SHEETCUT-2060-PRO-8000W","price":289900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/anchu-laser-sheetcut-2060-pro-6000w-656x1969-ft-fiber-laser-8046385.png?v=1772248268"},{"product_id":"anchu-combocut-2040t","title":"ANCHU ComboCut 2040T Plate \u0026 Tube Fiber Laser – 3000W\/6000W","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eANCHU ComboCut 2040T – 3000W\/6000W Plate \u0026amp; Tube Fiber Laser\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003eThe ANCHU ComboCut 2040T is a combined sheet and tube fiber laser system designed for US job shops, OEMs, and fabrication cells that need both flat and tubular cutting in one footprint. With a 79x158 in (2000×4000 mm) bed and tube module for up to Ø11.8 in, 20 ft lengths, this machine delivers flexibility for high-mix production and quick changeovers.\u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\n      \u003cstrong\u003eLaser Power:\u003c\/strong\u003e 3000W or 6000W · \u003cstrong\u003eSheet Bed:\u003c\/strong\u003e 79x158 in (2000×4000 mm) · \u003cstrong\u003eTube Capacity:\u003c\/strong\u003e Ø11.8 in, 20 ft\n    \u003c\/p\u003e\n  \u003c\/header\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003eCombined flat and tube laser cutting in one machine – maximize floor space and investment.\u003c\/li\u003e\n      \u003cli\u003eLarge 79x158 in (2000×4000 mm) sheet bed handles full-size plates and nested parts efficiently.\u003c\/li\u003e\n      \u003cli\u003eTube cutting module processes up to Ø11.8 in diameter and 20 ft length for structural, frame, and pipe jobs.\u003c\/li\u003e\n      \u003cli\u003eAvailable with 3000W or 6000W fiber laser sources (IPG, MAX Photonics, or Raycus) to match your throughput and material mix.\u003c\/li\u003e\n      \u003cli\u003eAutofocus cutting head and nesting from DXF\/STEP files streamline setups and part changeovers.\u003c\/li\u003e\n      \u003cli\u003eUS electrical package and safety interlocks ensure compliance and smooth integration into North American shops.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 3000W or 6000W\u003c\/p\u003e\n        \u003cp\u003eChoose the right wattage for your material thickness and productivity needs.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eSheet working area:\u003c\/strong\u003e 79x158 in (2000×4000 mm)\u003c\/p\u003e\n        \u003cp\u003eAccommodates full-size sheets for large panels, nested parts, and high-yield cutting.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eTube cutting:\u003c\/strong\u003e Up to Ø11.8 in diameter, 20 ft length\u003c\/p\u003e\n        \u003cp\u003eSupports a wide range of tube and pipe profiles for frames, supports, and fabrication projects.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser sources:\u003c\/strong\u003e IPG, MAX Photonics, Raycus\u003c\/p\u003e\n        \u003cp\u003eReliable, industry-proven fiber laser sources for consistent performance.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Autofocus\u003c\/p\u003e\n        \u003cp\u003eAutomatic focus adjustment for fast material changeovers and optimal edge quality.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eExchange table option:\u003c\/strong\u003e Yes\u003c\/p\u003e\n        \u003cp\u003eOptional exchange table boosts throughput and reduces downtime between sheets.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eFile compatibility:\u003c\/strong\u003e DXF\/STEP nesting\u003c\/p\u003e\n        \u003cp\u003eImport and nest parts directly from common CAD formats for streamlined workflow.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eFume extraction:\u003c\/strong\u003e Integrated ports\u003c\/p\u003e\n        \u003cp\u003eSupports shop safety and air quality compliance.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e US package\u003c\/p\u003e\n        \u003cp\u003eConfigured for North American voltage and safety standards.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003eThis combo fiber laser is ideal as a standalone cell or as part of a fabrication line, supporting both flat plate and tube\/pipe processing. Streamline your workflow from laser to press brake, welding, or assembly.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eCutting flat parts: brackets, panels, enclosures, machine bases, gussets\u003c\/li\u003e\n      \u003cli\u003eTube and pipe processing: frames, supports, handrails, structural members\u003c\/li\u003e\n      \u003cli\u003eHigh-mix\/low-volume production for job shops and contract manufacturers\u003c\/li\u003e\n      \u003cli\u003ePrototyping and short-run jobs with frequent part changes\u003c\/li\u003e\n      \u003cli\u003eIndustries: general fabrication, machinery, OEM components, HVAC, metal furniture\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003eThe ComboCut 2040T can be tailored to your shop's requirements, with options for laser power, automation, and integration.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003eLaser power: 3000W or 6000W configurations\u003c\/li\u003e\n      \u003cli\u003eChoice of fiber laser source: IPG, MAX Photonics, or Raycus\u003c\/li\u003e\n      \u003cli\u003eExchange table for higher throughput (optional)\u003c\/li\u003e\n      \u003cli\u003eStandard US electrical and safety package\u003c\/li\u003e\n      \u003cli\u003eCompatible with common nesting and CAD file formats (DXF\/STEP)\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003eWe work closely with US job shops and OEMs to ensure seamless integration—reviewing your power, floor space, and workflow to confirm fit before purchase. Our team can assist with nesting strategies, part programming, and initial cut parameters so your team is up and running quickly.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003ePre-installation checks for power, layout, and safety\u003c\/li\u003e\n      \u003cli\u003eApplication review: send us your part drawings (DXF\/STEP) for fit and cycle time confirmation\u003c\/li\u003e\n      \u003cli\u003eTraining and handover support for fast ramp-up\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eNext step: share a few sample parts or your material list, and we’ll confirm the best configuration for your needs.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"ANCHU LASER","offers":[{"title":"3000W","offer_id":52968451178862,"sku":"AN-ANCHU-COMBOCUT-2040T-3000W","price":199900.0,"currency_code":"USD","in_stock":true},{"title":"6000W","offer_id":52968451211630,"sku":"AN-ANCHU-COMBOCUT-2040T-6000W","price":269900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/anchu-combocut-2040t-plate-tube-fiber-laser-3000w6000w-7201471.png?v=1772248268"},{"product_id":"anchu-tubecut-120-proline","title":"ANCHU TubeCut 120 ProLine Tube Fiber Laser Cutting Machine — 15.7 in OD, 40 ft, 3kW to 6kW","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2\u003eANCHU TubeCut 120 ProLine Tube Fiber Laser Cutting Machine — 15.7 in OD, 40 ft, 3kW to 6kW\u003c\/h2\u003e\n    \u003cp\u003e\u003cstrong\u003eBest fit:\u003c\/strong\u003e U.S. structural fabricators, pipe and tube processors, OEM manufacturers, and production job shops that need large-diameter and long-length tube laser cutting capability.\u003c\/p\u003e\n    \u003cp\u003e\u003cstrong\u003eTube capacity:\u003c\/strong\u003e up to 15.7 in OD class · \u003cstrong\u003eTube length:\u003c\/strong\u003e up to 40 ft class · \u003cstrong\u003ePower options:\u003c\/strong\u003e 3kW, 4kW, 6kW · \u003cstrong\u003eUse case:\u003c\/strong\u003e structural tube, long profiles, frames, supports, railings, process piping, racks, and production tube fabrication.\u003c\/p\u003e\n  \u003c\/header\u003e\n\n  \u003csection style=\"border:1px solid #ddd;padding:18px;margin:18px 0;background:#f8f8f8;border-radius:8px;\"\u003e\n    \u003ch3 style=\"margin-top:0;\"\u003eQuote a 40 ft large-diameter tube laser\u003c\/h3\u003e\n    \u003cp\u003eThe TubeCut 120 ProLine is built for shops that have outgrown entry tube lasers and need larger OD, longer length, and stronger production capacity. It is a serious tube laser platform for buyers comparing 3kW, 4kW, and 6kW systems for structural and industrial tube work.\u003c\/p\u003e\n    \u003cp\u003e\u003cstrong\u003eSend us:\u003c\/strong\u003e tube profile, max OD, wall thickness, tube length, material type, production volume, sample DXF\/STEP\/PDF if available, delivery ZIP code, shop power, floor space, timeline, and whether you want financing options.\u003c\/p\u003e\n    \u003cp\u003e\u003cstrong\u003eFinancing may be available for qualified buyers\u003c\/strong\u003e, commonly with 24-60 month options depending on lender approval, credit profile, equipment package, and final invoice terms.\u003c\/p\u003e\n    \u003cp\u003e\u003ca href=\"\/es\/pages\/contact\" style=\"display:inline-block;padding:12px 18px;background:#111;color:#fff;text-decoration:none;border-radius:4px;font-weight:700;margin-right:8px;\"\u003eRequest Tube Laser Quote\u003c\/a\u003e \u003ca href=\"tel:+18722685842\" style=\"display:inline-block;padding:12px 18px;border:1px solid #111;color:#111;text-decoration:none;border-radius:4px;font-weight:700;\"\u003eCall UmproTech\u003c\/a\u003e\u003c\/p\u003e\n    \u003cp style=\"font-size:13px;color:#555;margin-bottom:0;\"\u003eFinal stock, freight, rigging, accessories, loading\/unloading setup, installation, training, taxes, and written invoice terms must be confirmed before payment.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch3\u003eWhy shops choose the TubeCut 120 ProLine\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003e40 ft tube class:\u003c\/strong\u003e strong fit for long tube, structural profiles, and production workflows.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e15.7 in OD class:\u003c\/strong\u003e supports larger-diameter tube and profile work than smaller tube lasers.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e3kW to 6kW options:\u003c\/strong\u003e choose the right power level for wall thickness, throughput, and budget.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eProduction tube cutting:\u003c\/strong\u003e helps reduce saw cutting, drilling, coping, manual layout, secondary operations, and outsourcing.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eHeavy buyer fit:\u003c\/strong\u003e useful for structural fabrication, process piping, machinery, frames, rails, racks, and industrial supports.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSupport path:\u003c\/strong\u003e UmproTech can help evaluate tube specs, floor layout, delivery, rigging, installation, training, and financing options for qualified buyers.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch3\u003eRecommended buyer fit\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eChoose TubeCut 120 ProLine\u003c\/strong\u003e if you need large OD, 40 ft tube length, and production tube cutting capacity.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eChoose TubeCut 65 Pro\u003c\/strong\u003e if your work fits 26 ft class tube and smaller OD requirements.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eChoose 3-chuck zero-tail tube laser\u003c\/strong\u003e if remnant reduction, material savings, and structural tube efficiency are the top priorities.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eChoose sheet + tube combo\u003c\/strong\u003e if tube work is occasional and you also need flat sheet cutting in the same machine.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch3\u003eCommon applications\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eLarge round, square, and rectangular tube profiles\u003c\/li\u003e\n      \u003cli\u003eStructural tube, process piping, frames, rails, supports, racks, machinery components, and welded assemblies\u003c\/li\u003e\n      \u003cli\u003eStructural fabrication shops, pipe processors, OEMs, industrial manufacturers, machinery builders, and contract manufacturers\u003c\/li\u003e\n      \u003cli\u003eReplacing manual layout, saw cutting, drilling, coping, and outsourced tube laser processing\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch3\u003eKey specification summary\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eTube OD class:\u003c\/strong\u003e up to 15.7 in\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eTube length class:\u003c\/strong\u003e up to 40 ft\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eLaser power options:\u003c\/strong\u003e 3000W, 4000W, 6000W\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMachine type:\u003c\/strong\u003e tube fiber laser cutting machine\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eTypical support needs:\u003c\/strong\u003e shop power, floor space, assist gas, fume extraction, chiller, loading\/unloading plan, rigging, installation, and operator training\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch3\u003eFAQ\u003c\/h3\u003e\n    \u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWho should buy the TubeCut 120 ProLine?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eIt is best for shops that need large-diameter tube capacity, long 40 ft class tube handling, and production-level tube cutting for structural or industrial work.\u003c\/p\u003e\u003c\/details\u003e\n    \u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eShould I choose 3kW, 4kW, or 6kW?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003e3kW can be a strong value option for many tube jobs. 4kW adds flexibility. 6kW is better for higher throughput and heavier wall requirements. Final recommendation depends on material, OD, wall thickness, and production volume.\u003c\/p\u003e\u003c\/details\u003e\n    \u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eDoes UmproTech offer financing?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eFinancing may be available for qualified buyers, commonly with 24-60 month options depending on lender approval, credit profile, equipment package, and final invoice terms. Approval and terms are not guaranteed.\u003c\/p\u003e\u003c\/details\u003e\n    \u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhat information is needed for a quote?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eSend tube profile, OD, wall thickness, tube length, material, production volume, delivery ZIP code, shop power, available floor space, timeline, and whether you need installation, training, or financing.\u003c\/p\u003e\u003c\/details\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"ANCHU LASER","offers":[{"title":"3000W","offer_id":52968451965294,"sku":"AN-ANCHU-TUBECUT-120-PROLINE-3000W","price":249900.0,"currency_code":"USD","in_stock":true},{"title":"4000W","offer_id":52968451998062,"sku":"AN-ANCHU-TUBECUT-120-PROLINE-4000W","price":279900.0,"currency_code":"USD","in_stock":true},{"title":"6000W","offer_id":52968452030830,"sku":"AN-ANCHU-TUBECUT-120-PROLINE-6000W","price":339900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/anchu-laser-tubecut-120-proline-157-in-od-tube-40-ft-length-3000w-3227016.png?v=1772248268"},{"product_id":"anchu-powercut-1530-hp","title":"ANCHU PowerCut 1530 HP • 5x10 ft • 6000W–12000W Fiber Laser","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eANCHU PowerCut 1530 HP • 5x10 ft High-Power Fiber Laser (6000W–12000W)\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003eThe ANCHU PowerCut 1530 HP is an enclosed, high-power fiber laser system engineered for US job shops and OEMs that demand fast, reliable cutting of thick plate and high-mix parts. With a reinforced gantry, dual pallet changer, and a 5x10 ft (1500×3000 mm) bed, it is built for throughput and uptime in demanding production environments.\u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eWorking area:\u003c\/strong\u003e 5x10 ft (1500×3000 mm) · \u003cstrong\u003eLaser power:\u003c\/strong\u003e 6000W–12000W · \u003cstrong\u003eEnclosed design with dual pallet changer\u003c\/strong\u003e\u003c\/p\u003e\n  \u003c\/header\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e5x10 ft (1500×3000 mm) cutting bed supports large sheets and nested parts for maximum material yield.\u003c\/li\u003e\n      \u003cli\u003eAvailable with 6000W, 8000W, or 12000W fiber laser sources (IPG, MAX Photonics, Raycus) to match your throughput and thickness needs.\u003c\/li\u003e\n      \u003cli\u003eEnclosed design with safety interlocks and fume extraction ports for operator safety and clean shop air.\u003c\/li\u003e\n      \u003cli\u003eDual pallet changer enables high productivity and minimal downtime between sheet loads.\u003c\/li\u003e\n      \u003cli\u003eAutofocus cutting head and nesting from DXF\/STEP streamline setup and enable quick changeovers for high-mix production.\u003c\/li\u003e\n      \u003cli\u003eUS electrical package ensures seamless integration with North American shop power and safety standards.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6000W \/ 8000W \/ 12000W\u003c\/p\u003e\n        \u003cp\u003eChoose the right power level for your plate thickness and cutting speed requirements.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eWorking area:\u003c\/strong\u003e 5x10 ft (1500×3000 mm)\u003c\/p\u003e\n        \u003cp\u003eHandles full-size sheets for efficient nesting and reduced material waste.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eMachine design:\u003c\/strong\u003e Enclosed with reinforced gantry\u003c\/p\u003e\n        \u003cp\u003eProvides stability for high-accuracy cuts and operator protection.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eAutomation:\u003c\/strong\u003e Dual pallet changer\u003c\/p\u003e\n        \u003cp\u003eEnables continuous operation and fast sheet changeovers for higher throughput.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Autofocus\u003c\/p\u003e\n        \u003cp\u003eOptimizes piercing and cutting for a range of materials and thicknesses.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eFile compatibility:\u003c\/strong\u003e DXF \/ STEP nesting\u003c\/p\u003e\n        \u003cp\u003eStreamlines workflow from CAD to cut parts.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eFume extraction:\u003c\/strong\u003e Integrated ports\u003c\/p\u003e\n        \u003cp\u003eSupports connection to shop air handling for a clean environment.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eElectrical package:\u003c\/strong\u003e US standard\u003c\/p\u003e\n        \u003cp\u003eReady for North American voltage and safety compliance.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser sources:\u003c\/strong\u003e IPG, MAX Photonics, Raycus\u003c\/p\u003e\n        \u003cp\u003eProven fiber laser brands for reliability and serviceability.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003eThis high-power fiber laser is a core asset for standalone cutting cells or as part of an integrated fabrication line with press brakes, welders, and automation. Ideal for contract manufacturers and OEMs handling thick plate, large panels, and high part volumes.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eCutting of steel, stainless, and aluminum plate (thicknesses depend on selected power source)\u003c\/li\u003e\n      \u003cli\u003eProduction of brackets, panels, frames, structural members, and nested part batches\u003c\/li\u003e\n      \u003cli\u003eSupports high-mix\/low-volume and repeat production for job shops and OEMs\u003c\/li\u003e\n      \u003cli\u003eFits into workflows with press brakes, saws, and welding cells for end-to-end fabrication\u003c\/li\u003e\n      \u003cli\u003eUsed in machinery, metal fabrication, HVAC, and general manufacturing\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003eThe PowerCut 1530 HP can be tailored to your shop's requirements, with multiple laser power levels and integration-ready features.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003eStandard 5x10 ft (1500×3000 mm) bed with dual pallet changer\u003c\/li\u003e\n      \u003cli\u003eChoose from 6000W, 8000W, or 12000W fiber laser sources\u003c\/li\u003e\n      \u003cli\u003eLaser source options: IPG, MAX Photonics, or Raycus\u003c\/li\u003e\n      \u003cli\u003eAutofocus cutting head included as standard\u003c\/li\u003e\n      \u003cli\u003eUS electrical and safety package for straightforward installation\u003c\/li\u003e\n      \u003cli\u003eIntegrated fume extraction ports for shop air handling\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003eWe partner with US fabricators to ensure a smooth installation, from pre-install checks (power, floor, material flow) to safety and operator training. Our team can review your parts, materials, and thickness requirements to confirm the right configuration before you commit.\u003c\/p\u003e\n    \u003cp\u003eWe support your team with nesting strategies, basic program setup, and best practices for maximizing throughput and uptime. Our experience with high-mix, high-power laser applications helps you get productive quickly.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003ePre-install consultation for power, layout, and material handling\u003c\/li\u003e\n      \u003cli\u003eApplication review to confirm fit for your part mix and thicknesses\u003c\/li\u003e\n      \u003cli\u003eTraining and handover to get your operators cutting efficiently\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eNext step: Send us a few sample parts (DXF\/STEP\/PDF) and we’ll confirm fit, cycle time, and the best configuration for your workflow.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"ANCHU LASER","offers":[{"title":"6000W","offer_id":52968453603694,"sku":"AN-ANCHU-POWERCUT-1530-HP-6000W","price":299900.0,"currency_code":"USD","in_stock":true},{"title":"8000W","offer_id":52968453636462,"sku":"AN-ANCHU-POWERCUT-1530-HP-8000W","price":369900.0,"currency_code":"USD","in_stock":true},{"title":"12000W","offer_id":52968453669230,"sku":"AN-ANCHU-POWERCUT-1530-HP-12000W","price":499900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/anchu-powercut-1530-hp-5x10-ft-6000w-12000w-fiber-laser-6743002.png?v=1772248268"},{"product_id":"anchu-powercut-2040-hp","title":"ANCHU LASER PowerCut 2040 HP | 8000W–15000W Fiber Laser, 6.56x13.12 ft","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eANCHU LASER PowerCut 2040 HP – 8000W–15000W Fiber Laser, 6.56x13.12 ft (2000×4000 mm)\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003eThe ANCHU PowerCut 2040 HP is a fully enclosed, high-power fiber laser system engineered for US fabrication shops and OEMs needing reliable, high-throughput cutting of thick plate and large-format parts. With a reinforced gantry, dual pallet changer, and advanced safety features, it’s designed for production environments where uptime, cut quality, and operator safety are critical.\u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\n      \u003cstrong\u003eLaser Power:\u003c\/strong\u003e 8000W–15000W · \u003cstrong\u003eBed Size:\u003c\/strong\u003e 6.56x13.12 ft (2000×4000 mm) · \u003cstrong\u003eEnclosed, Dual Pallet\u003c\/strong\u003e\n    \u003c\/p\u003e\n  \u003c\/header\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003eHigh-power fiber laser sources (8000W, 12000W, 15000W) for fast, clean cutting of thick plate and a wide range of metals\u003c\/li\u003e\n      \u003cli\u003eLarge 6.56x13.12 ft (2000×4000 mm) bed accommodates full-size sheets and large-format parts, reducing setups and material handling\u003c\/li\u003e\n      \u003cli\u003eFully enclosed cutting area with safety interlocks and fume extraction ports for operator safety and compliance\u003c\/li\u003e\n      \u003cli\u003eDual pallet changer maximizes throughput and keeps production moving during part loading\/unloading\u003c\/li\u003e\n      \u003cli\u003eAutofocus cutting head and nesting from DXF\/STEP for efficient job setup and high part yield\u003c\/li\u003e\n      \u003cli\u003eUS electrical package and integration support for seamless installation in North American shops\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 8000W, 12000W, 15000W\u003c\/p\u003e\n        \u003cp\u003eHigh wattage enables fast cutting of thick plate and high-volume production runs.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eBed size:\u003c\/strong\u003e 6.56x13.12 ft (2000×4000 mm)\u003c\/p\u003e\n        \u003cp\u003eHandles full-size sheets and oversized parts, ideal for large panels, frames, and nested jobs.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Fully enclosed with safety interlocks\u003c\/p\u003e\n        \u003cp\u003eProtects operators and meets safety standards for high-power laser processing.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003ePallet system:\u003c\/strong\u003e Dual automatic pallet changer\u003c\/p\u003e\n        \u003cp\u003eReduces downtime between jobs and supports continuous production flow.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Autofocus\u003c\/p\u003e\n        \u003cp\u003eEnables rapid material changeovers and consistent cut quality across thicknesses.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eSoftware:\u003c\/strong\u003e Nesting from DXF\/STEP\u003c\/p\u003e\n        \u003cp\u003eStreamlines programming and material utilization for high-mix jobs.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eFume extraction:\u003c\/strong\u003e Integrated ports\u003c\/p\u003e\n        \u003cp\u003eSupports clean operation and air quality in the shop.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e US package\u003c\/p\u003e\n        \u003cp\u003eConfigured for North American power standards and compliance.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser sources:\u003c\/strong\u003e IPG, MAX Photonics, Raycus\u003c\/p\u003e\n        \u003cp\u003eReliable, globally recognized fiber laser sources for consistent performance.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003eThe PowerCut 2040 HP is built for high-mix, high-volume metal fabrication—ideal as a standalone cutting cell or as part of an integrated line with press brakes, welding cells, or automated material handling.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eCutting of thick steel, stainless, and aluminum plate (within power and process limits)\u003c\/li\u003e\n      \u003cli\u003eLarge panels, frames, machine bases, and structural components\u003c\/li\u003e\n      \u003cli\u003ePart nesting for contract manufacturing, job shops, and OEM production\u003c\/li\u003e\n      \u003cli\u003eHVAC, machinery, enclosures, and custom fabrication\u003c\/li\u003e\n      \u003cli\u003eSupports high-mix\/low-volume and repeat production scenarios\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003eThe PowerCut 2040 HP is available in multiple high-power configurations and can be tailored to your shop’s needs.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003eLaser power options: 8000W, 12000W, 15000W\u003c\/li\u003e\n      \u003cli\u003eChoice of fiber laser source: IPG, MAX Photonics, or Raycus\u003c\/li\u003e\n      \u003cli\u003eAutofocus cutting head included as standard\u003c\/li\u003e\n      \u003cli\u003eUS electrical package for straightforward installation\u003c\/li\u003e\n      \u003cli\u003eIntegrated fume extraction and safety interlocks\u003c\/li\u003e\n      \u003cli\u003eDual pallet changer standard for all configurations\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003eWe support US fabricators and OEMs from pre-installation planning through commissioning. Our team reviews your power, floor space, and material flow requirements to ensure a smooth fit and fast ramp-up. We can assist with nesting strategies, cut parameter setup, and operator training to maximize productivity from day one.\u003c\/p\u003e\n    \u003cp\u003eNext step: Send us your sample parts (DXF\/STEP\/PDF) and we’ll confirm fit, cycle time, and best configuration for your workflow.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"ANCHU LASER","offers":[{"title":"8000W","offer_id":52968455274862,"sku":"AN-ANCHU-POWERCUT-2040-HP-8000W","price":399900.0,"currency_code":"USD","in_stock":true},{"title":"12000W","offer_id":52968455307630,"sku":"AN-ANCHU-POWERCUT-2040-HP-12000W","price":549900.0,"currency_code":"USD","in_stock":true},{"title":"15000W","offer_id":52968455340398,"sku":"AN-ANCHU-POWERCUT-2040-HP-15000W","price":649900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/anchu-laser-powercut-2040-hp-8000w-15000w-fiber-laser-656x1312-ft-2016919.png?v=1772248268"},{"product_id":"um-1530b-open","title":"UmproTech 1530B 5x10 Open Fiber Laser Cutting Machine — 1.5kW to 6kW","description":"\u003ch2\u003eUmproTech 1530B 5x10 Open Fiber Laser Cutting Machine — 1.5kW to 6kW\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQuote-first industrial laser package for U.S. fabrication shops.\u003c\/strong\u003e The UmproTech 1530B is a 5x10 open-type fiber laser platform for sheet metal cutting, built for shops that want a practical production machine without paying for a fully enclosed shuttle-table system.\u003c\/p\u003e\u003cp\u003eThis page is not meant to be treated like a small online checkout item. Final machine fit, laser power, delivery, unloading, compressor, installation, training, support, taxes, and financing should be confirmed before invoice.\u003c\/p\u003e\u003ch3\u003eBest Fit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJob shops and fabrication teams cutting mild steel, stainless, aluminum, galvanized sheet, and similar materials\u003c\/li\u003e\n\u003cli\u003eBuyers comparing entry production fiber laser options from 1.5kW, 2kW, 3kW, and 6kW\u003c\/li\u003e\n\u003cli\u003eShops that want a 5x10 sheet capacity with a lower entry cost than an enclosed system\u003c\/li\u003e\n\u003cli\u003eOwners who need a delivered quote with freight, install, training, and financing options\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePower Selection Guide\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.5kW to 2kW:\u003c\/strong\u003e lower-cost entry option for thinner material and lighter production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3kW:\u003c\/strong\u003e strong budget-to-production balance for many shops cutting common sheet thicknesses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6kW:\u003c\/strong\u003e better fit for faster production, thicker material range, and more throughput.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRequest a Delivered Quote\u003c\/h3\u003e\u003cp\u003eFor the fastest accurate quote, send:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial type and maximum thickness\u003c\/li\u003e\n\u003cli\u003eTypical sheet size and expected production volume\u003c\/li\u003e\n\u003cli\u003ePreferred laser power: 1.5kW, 2kW, 3kW, or 6kW\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and unloading plan\u003c\/li\u003e\n\u003cli\u003eWhether you need compressor, chiller, dust collection, installation, startup, training, or financing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCall or text sales:\u003c\/strong\u003e \u003ca href=\"tel:+18722685842\"\u003e+1 (872) 268-5842\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e \u003ca href=\"mailto:am@umpro-tech.com\"\u003eam@umpro-tech.com\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eWhat UmproTech Can Quote With the Machine\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMachine configuration review based on your material and cutting goals\u003c\/li\u003e\n\u003cli\u003eFreight and delivered-price estimate to your ZIP code\u003c\/li\u003e\n\u003cli\u003eCompressor and auxiliary equipment options\u003c\/li\u003e\n\u003cli\u003eInstallation, startup, and operator training options\u003c\/li\u003e\n\u003cli\u003eU.S. support, service planning, spare parts, and consumables review\u003c\/li\u003e\n\u003cli\u003eFinancing options for qualified buyers, typically 24-60 month programs, subject to approval and lender terms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore You Buy\u003c\/h3\u003e\u003cp\u003eFinal price, stock, lead time, freight, taxes, power requirements, accessories, installation scope, warranty terms, and invoice details must be confirmed in writing. Product images and listed configurations may vary from the final quoted package.\u003c\/p\u003e","brand":"UmproTech","offers":[{"title":"1500","offer_id":52980085326190,"sku":"UM LCTEC1530B-1500CW","price":34300.0,"currency_code":"USD","in_stock":true},{"title":"2000","offer_id":52980085358958,"sku":"UM LCTEC1530B-2000CW","price":41300.0,"currency_code":"USD","in_stock":true},{"title":"3000","offer_id":52980085391726,"sku":"UM LCTEC1530B-3000CW","price":48300.0,"currency_code":"USD","in_stock":true},{"title":"6000","offer_id":52980085424494,"sku":"UM LCTEC1530B-6000CW","price":85750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-1530b-open-fiber-laser-15303050-mm-15-6-kw-maxphotonics-3557063.png?v=1772248267"},{"product_id":"um-1530s-open","title":"UmproTech 1530S 5x10 Open Fiber Laser Cutting Machine — Raycus 1.5kW to 6kW","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2\u003eUmproTech 1530S 5x10 Open Fiber Laser Cutting Machine — Raycus 1.5kW to 6kW\u003c\/h2\u003e\n    \u003cp\u003e\u003cstrong\u003eBest fit:\u003c\/strong\u003e U.S. fabrication shops, OEMs, job shops, and manufacturers that want a 5x10 open fiber laser platform with Raycus source options and a practical quote-first buying path.\u003c\/p\u003e\n    \u003cp\u003e\u003cstrong\u003eWorking area:\u003c\/strong\u003e 1530 x 3050 mm \/ approx. 5 ft x 10 ft · \u003cstrong\u003ePower options:\u003c\/strong\u003e 1.5kW, 2kW, 3kW, 6kW · \u003cstrong\u003eUse case:\u003c\/strong\u003e mild steel, stainless steel, aluminum, brackets, panels, enclosures, frames, signs, HVAC parts, and general sheet metal production.\u003c\/p\u003e\n  \u003c\/header\u003e\n\n  \u003csection style=\"border:1px solid #ddd;padding:18px;margin:18px 0;background:#f8f8f8;border-radius:8px;\"\u003e\n    \u003ch3 style=\"margin-top:0;\"\u003eCompare 3kW and 6kW fiber laser options before you buy\u003c\/h3\u003e\n    \u003cp\u003eThe 1530S is a practical 5x10 sheet fiber laser for buyers comparing entry-level and production cutting systems. A 3kW configuration is often attractive for thinner material and budget-sensitive shops. A 6kW configuration is stronger for production speed, thicker mild steel, and heavier daily use.\u003c\/p\u003e\n    \u003cp\u003e\u003cstrong\u003eSend us:\u003c\/strong\u003e material type, maximum thickness, sheet size, production volume, shop power, delivery ZIP code, timeline, and whether you want financing options.\u003c\/p\u003e\n    \u003cp\u003e\u003cstrong\u003eFinancing may be available for qualified buyers\u003c\/strong\u003e, commonly with 24-60 month options depending on lender approval, credit profile, equipment package, and final invoice terms.\u003c\/p\u003e\n    \u003cp\u003e\u003ca href=\"\/es\/pages\/contact\" style=\"display:inline-block;padding:12px 18px;background:#111;color:#fff;text-decoration:none;border-radius:4px;font-weight:700;margin-right:8px;\"\u003eRequest Delivered Quote\u003c\/a\u003e \u003ca href=\"tel:+18722685842\" style=\"display:inline-block;padding:12px 18px;border:1px solid #111;color:#111;text-decoration:none;border-radius:4px;font-weight:700;\"\u003eCall UmproTech\u003c\/a\u003e\u003c\/p\u003e\n    \u003cp style=\"font-size:13px;color:#555;margin-bottom:0;\"\u003eFinal price depends on configuration, stock, freight, taxes, accessories, compressor\/gas setup, installation, training, and written invoice terms.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch3\u003eWhy shops choose the 1530S\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003e5x10 sheet capacity:\u003c\/strong\u003e supports common U.S. sheet metal workflows and full-size sheet cutting.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRaycus source options:\u003c\/strong\u003e available in 1.5kW, 2kW, 3kW, and 6kW configurations.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eOpen table design:\u003c\/strong\u003e practical loading access and lower complexity compared with premium enclosed systems.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eGood first production laser:\u003c\/strong\u003e strong fit for shops moving from outsourced cutting, plasma, saw, or manual operations into in-house laser cutting.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSupport path:\u003c\/strong\u003e UmproTech can help coordinate delivery, installation, startup, training, accessories, and financing options for qualified buyers.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch3\u003eRecommended buyer fit\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eChoose 3kW\u003c\/strong\u003e for lower entry cost, thinner-to-mid gauge work, and general fabrication.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eChoose 6kW\u003c\/strong\u003e for faster throughput, thicker mild steel, and heavier production requirements.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eChoose sheet + tube combo\u003c\/strong\u003e if you regularly cut tube\/profile work in addition to flat sheet.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eChoose compact 5x5\u003c\/strong\u003e if floor space and small parts matter more than full 5x10 sheet capacity.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch3\u003eCommon applications\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eJob shop sheet metal cutting\u003c\/li\u003e\n      \u003cli\u003eBrackets, plates, panels, enclosures, gussets, signs, HVAC parts, and frames\u003c\/li\u003e\n      \u003cli\u003eOEM production, contract manufacturing, repair shops, machinery builders, and fabrication teams\u003c\/li\u003e\n      \u003cli\u003eDownstream bending, welding, finishing, and assembly workflows\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch3\u003eKey specification summary\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWorking area:\u003c\/strong\u003e 1530 x 3050 mm \/ approx. 5 ft x 10 ft\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eLaser power options:\u003c\/strong\u003e 1500W, 2000W, 3000W, 6000W\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMachine type:\u003c\/strong\u003e open type sheet fiber laser cutting machine\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e mild steel, stainless steel, aluminum, and other laser-suitable metals depending on final configuration\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eTypical support needs:\u003c\/strong\u003e assist gas, chiller, compressor or gas setup, fume extraction, shop power, rigging, installation, and operator training\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch3\u003eFAQ\u003c\/h3\u003e\n    \u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eIs the 1530S good for a first 5x10 fiber laser?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eYes. It is a practical fit for many shops that want a full 5x10 work area and configurable power without moving straight into a more expensive enclosed system.\u003c\/p\u003e\u003c\/details\u003e\n    \u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eShould I buy 3kW or 6kW?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003e3kW is usually better for budget-conscious buyers and thinner-to-mid gauge material. 6kW is better for production speed and thicker mild steel work.\u003c\/p\u003e\u003c\/details\u003e\n    \u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eDoes UmproTech offer financing?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eFinancing may be available for qualified buyers, commonly with 24-60 month options depending on lender approval, credit profile, equipment package, and final invoice terms. Approval and terms are not guaranteed.\u003c\/p\u003e\u003c\/details\u003e\n    \u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eCan UmproTech quote delivery and installation?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eYes. Send your delivery ZIP code, shop power, machine configuration, installation needs, compressor\/gas setup, and timeline so UmproTech can prepare a more accurate delivered quote.\u003c\/p\u003e\u003c\/details\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"UmproTech","offers":[{"title":"1500","offer_id":52980085817710,"sku":"UM LCTEC1530s-1500CW","price":41300.0,"currency_code":"USD","in_stock":true},{"title":"2000","offer_id":52980085850478,"sku":"UM LCTEC1530s-2000CW","price":48300.0,"currency_code":"USD","in_stock":true},{"title":"3000","offer_id":52980085883246,"sku":"UM LCTEC1530s-3000CW","price":55300.0,"currency_code":"USD","in_stock":true},{"title":"6000","offer_id":52980085916014,"sku":"UM LCTEC1530s-6000CW","price":92750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-1530s-open-type-fiber-laser-15303050-mm-raycus-1572432.png?v=1772248267"},{"product_id":"um-ts62-tube","title":"UmproTech TS62 8kW Tube Fiber Laser – 6m x 220mm Capacity","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eUmproTech TS62 – 8 kW Tube Fiber Laser, 6,000 mm x 220 mm\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003eThe TS62 is a high-power tube fiber laser engineered for US job shops and OEMs needing fast, precise cutting of long, heavy-wall tubes and profiles. With a robust 8,000 W fiber laser source and automatic handling, it’s built for high-volume production and demanding part mixes.\u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eMax tube length:\u003c\/strong\u003e 6,000 mm · \u003cstrong\u003eTube diameter:\u003c\/strong\u003e up to 220 mm · \u003cstrong\u003eLaser power:\u003c\/strong\u003e 8,000 W\u003c\/p\u003e\n  \u003c\/header\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003eProcesses tubes up to 6,000 mm length and 220 mm diameter for large frames, structural members, and heavy profiles.\u003c\/li\u003e\n      \u003cli\u003e8,000 W fiber laser source delivers high cutting speed and thick-wall capability on steel, stainless, and alloys.\u003c\/li\u003e\n      \u003cli\u003eAutomatic pneumatic chucks and tube supports enable fast, reliable loading and positioning for continuous production.\u003c\/li\u003e\n      \u003cli\u003eIndustrial chiller and centralized lubrication reduce maintenance and maximize uptime in demanding shop environments.\u003c\/li\u003e\n      \u003cli\u003eDesigned for integration into high-volume tube cutting cells or as a standalone system for contract manufacturing.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 8,000 W\u003c\/p\u003e\n        \u003cp\u003eHigh power output for fast processing of thick-wall tubes and heavy-duty profiles.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eMax tube length:\u003c\/strong\u003e 6,000 mm\u003c\/p\u003e\n        \u003cp\u003eHandles standard 6 m stock for efficient nesting and minimal waste.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eTube diameter:\u003c\/strong\u003e up to 220 mm\u003c\/p\u003e\n        \u003cp\u003eAccommodates a wide range of round, square, and rectangular tube sizes for diverse applications.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eAutomatic pneumatic chucks \u0026amp; tube supports\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp\u003eEnable fast changeovers and secure clamping for repeatable accuracy.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eIndustrial chiller \u0026amp; centralized lubrication\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp\u003eSupport continuous operation and reduce downtime for maintenance.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003eThe TS62 fits seamlessly into fabrication shops, automation cells, and OEM lines where high-throughput tube and pipe cutting is critical. It’s ideal for both high-mix\/low-volume and repeat production runs.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eStructural frames, machine bases, and welded assemblies\u003c\/li\u003e\n      \u003cli\u003eFabricated tubing for machinery, construction, and general fabrication\u003c\/li\u003e\n      \u003cli\u003eHVAC, furniture, and contract manufacturing\u003c\/li\u003e\n      \u003cli\u003eHeavy-wall and large-diameter tube profiles for industrial projects\u003c\/li\u003e\n      \u003cli\u003eIntegration with downstream forming, welding, and assembly cells\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003eThe TS62 is available in a high-power 8,000 W configuration with engineered automation for demanding shops. Standard features include automatic pneumatic chucks, tube supports, industrial chiller, and centralized lubrication.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e8,000 W fiber laser source (standard)\u003c\/li\u003e\n      \u003cli\u003eAutomatic pneumatic chucks and tube supports\u003c\/li\u003e\n      \u003cli\u003eIndustrial chiller and lubrication system\u003c\/li\u003e\n      \u003cli\u003eAvailable with multiple tube handling and loading solutions (on request)\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003eOur team works closely with US fabricators and OEMs to ensure smooth installation and integration. We review your part mix, materials, and shop layout to confirm fit and performance before purchase. On-site commissioning, operator training, and basic programming support are included to help your team ramp up quickly.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003ePre-installation review: power, floor space, and workflow planning\u003c\/li\u003e\n      \u003cli\u003eApplication support for tube profiles, thicknesses, and nesting strategies\u003c\/li\u003e\n      \u003cli\u003eTraining on operation, maintenance, and safety best practices\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eNext step: send us your tube profiles or sample parts (DXF\/STEP\/PDF) and we’ll confirm fit, cycle time, and configuration for your application.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"UmproTech","offers":[{"title":"8000","offer_id":52980088242542,"sku":"TS62 6000","price":132034.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/anchu-tubelaser-6016-us-4-kw-6m-automatic-tube-laser-6921188.png?v=1772248206"},{"product_id":"um-1530et-combo","title":"UmproTech 1530ET 5x10 Sheet and Tube Fiber Laser Cutting Machine — 6kW","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2\u003eUmproTech 1530ET 5x10 Sheet and Tube Fiber Laser Cutting Machine — 6kW\u003c\/h2\u003e\n    \u003cp\u003e\u003cstrong\u003eBest fit:\u003c\/strong\u003e U.S. fabrication shops and manufacturers that need one fiber laser for both 5x10 sheet metal cutting and tube\/profile cutting.\u003c\/p\u003e\n    \u003cp\u003e\u003cstrong\u003eWorking area:\u003c\/strong\u003e 1530 x 3050 mm \/ approx. 5 ft x 10 ft sheet capacity · \u003cstrong\u003eLaser power:\u003c\/strong\u003e 6kW · \u003cstrong\u003eUse case:\u003c\/strong\u003e sheet metal parts, tube parts, frames, brackets, enclosures, structural components, production fabrication, and mixed sheet\/tube workflows.\u003c\/p\u003e\n  \u003c\/header\u003e\n\n  \u003csection style=\"border:1px solid #ddd;padding:18px;margin:18px 0;background:#f8f8f8;border-radius:8px;\"\u003e\n    \u003ch3 style=\"margin-top:0;\"\u003eQuote a 6kW sheet + tube fiber laser for your shop\u003c\/h3\u003e\n    \u003cp\u003eThe 1530ET is designed for buyers comparing a dedicated sheet laser versus a combination sheet-and-tube fiber laser. It can be a strong fit when your shop cuts both flat parts and round\/square\/rectangular tube and wants to reduce outsourcing, secondary operations, and separate machine purchases.\u003c\/p\u003e\n    \u003cp\u003e\u003cstrong\u003eSend us:\u003c\/strong\u003e material type, max sheet thickness, tube size\/profile, tube length, production volume, sample DXF\/STEP\/PDF if available, delivery ZIP code, shop power, timeline, and whether you want financing options.\u003c\/p\u003e\n    \u003cp\u003e\u003cstrong\u003eFinancing may be available for qualified buyers\u003c\/strong\u003e, commonly with 24-60 month options depending on lender approval, credit profile, equipment package, and final invoice terms.\u003c\/p\u003e\n    \u003cp\u003e\u003ca href=\"\/es\/pages\/contact\" style=\"display:inline-block;padding:12px 18px;background:#111;color:#fff;text-decoration:none;border-radius:4px;font-weight:700;margin-right:8px;\"\u003eRequest Delivered Quote\u003c\/a\u003e \u003ca href=\"tel:+18722685842\" style=\"display:inline-block;padding:12px 18px;border:1px solid #111;color:#111;text-decoration:none;border-radius:4px;font-weight:700;\"\u003eCall UmproTech\u003c\/a\u003e\u003c\/p\u003e\n    \u003cp style=\"font-size:13px;color:#555;margin-bottom:0;\"\u003eFinal stock, freight, taxes, accessories, compressor, tube package, installation, training, and written invoice terms must be confirmed before payment.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch3\u003eWhy shops choose the 1530ET\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eTwo capabilities in one machine:\u003c\/strong\u003e cut both sheet metal and tube\/profile work from one fiber laser platform.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e6kW production power:\u003c\/strong\u003e stronger option for buyers who need speed, thicker mild steel capability, and daily production use.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e5x10 sheet workflow:\u003c\/strong\u003e supports common U.S. sheet sizes for fabrication, OEM, and contract manufacturing jobs.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eTube capability:\u003c\/strong\u003e useful for frames, railings, mechanical supports, machine structures, furniture, farm equipment, and structural components.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBetter equipment ROI:\u003c\/strong\u003e can reduce the need to buy separate sheet and tube cutting systems for mixed-work shops.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eUmproTech support path:\u003c\/strong\u003e delivery coordination, installation, startup, training, accessories, and financing options for qualified buyers.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch3\u003eRecommended buyer fit\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eChoose 1530ET\u003c\/strong\u003e if your shop cuts both sheet and tube and wants one production-focused fiber laser platform.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eChoose open 1530B\/1530S\u003c\/strong\u003e if your work is mostly flat sheet and budget is the main priority.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eChoose a dedicated tube laser\u003c\/strong\u003e if tube production is your main business and you need higher automation, larger OD, longer lengths, or heavy structural tube capacity.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch3\u003eCommon applications\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eFlat sheet parts, brackets, plates, panels, gussets, enclosures, and machine guards\u003c\/li\u003e\n      \u003cli\u003eRound tube, square tube, rectangular tube, frames, supports, rails, racks, and welded assemblies\u003c\/li\u003e\n      \u003cli\u003eJob shops, OEMs, contract manufacturers, structural fabricators, farm equipment shops, and machinery builders\u003c\/li\u003e\n      \u003cli\u003eMixed sheet\/tube production where outsourcing slows delivery or increases cost\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch3\u003eKey specification summary\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSheet working area:\u003c\/strong\u003e 1530 x 3050 mm \/ approx. 5 ft x 10 ft\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6kW\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMachine type:\u003c\/strong\u003e combination sheet and tube fiber laser cutting machine\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e mild steel, stainless steel, aluminum, and other laser-suitable metals depending on final configuration\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eTypical support needs:\u003c\/strong\u003e assist gas, compressor or nitrogen\/oxygen setup, chiller, fume extraction, shop power, rigging, tube setup, installation, and operator training\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch3\u003eFAQ\u003c\/h3\u003e\n    \u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eIs a sheet + tube laser better than a sheet-only laser?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eIt depends on your work mix. If you cut tube regularly, a combo machine can save floor space and reduce outsourcing. If almost all work is flat sheet, a sheet-only fiber laser may be simpler and lower cost.\u003c\/p\u003e\u003c\/details\u003e\n    \u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWho should choose 6kW?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003e6kW is a stronger fit for production buyers who need faster cutting, thicker mild steel capability, and better throughput than lower-power entry machines.\u003c\/p\u003e\u003c\/details\u003e\n    \u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eDoes UmproTech offer financing?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eFinancing may be available for qualified buyers, commonly with 24-60 month options depending on lender approval, credit profile, equipment package, and final invoice terms. Approval and terms are not guaranteed.\u003c\/p\u003e\u003c\/details\u003e\n    \u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eCan I get a final delivered price?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eYes. UmproTech can prepare a delivered quote after confirming machine configuration, stock, freight, installation, training, compressor\/accessories, taxes, delivery ZIP code, and invoice terms.\u003c\/p\u003e\u003c\/details\u003e\n    \u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhat information is needed for a quote?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eSend material type, max sheet thickness, tube profile\/diameter, tube wall thickness, tube length, production volume, sample files if available, delivery ZIP code, shop power, and timeline.\u003c\/p\u003e\u003c\/details\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"UmproTech","offers":[{"title":"6000","offer_id":52980088668526,"sku":"1530ET 6000","price":104553.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-1530et-sheet-tube-fiber-laser-15303050-mm-6000-w-9566048.png?v=1772248266"},{"product_id":"fl44-6000-4x4-open-type-fiber-laser-cutter-6000w","title":"EtalTec FL44-6000 – 4x4 ft Open-Type Fiber Laser Cutter 6000W","description":"\u003cp\u003e\u003cstrong\u003eEtalTec FL44-6000 – 4x4 ft Open-Type Fiber Laser Cutter 6000W\u003c\/strong\u003e is part of the EtalTec \u003cstrong\u003eopen-type 4x4 ft fiber laser cutting\u003c\/strong\u003e line built around the power tiers most commonly compared by U.S. buyers looking for compact sheet-metal cutting systems.\u003c\/p\u003e\u003cp\u003eThis model is positioned for buyers who want a smaller-footprint open table for metal fabrication while still choosing the right power class for their material mix, throughput target, and budget.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking format:\u003c\/strong\u003e open-type 4x4 ft fiber laser cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower class:\u003c\/strong\u003e 6000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e faster production cutting, thicker material work, higher-throughput fab shops\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption pack:\u003c\/strong\u003e auto-focus head, chiller, servo package, fume extraction, assist-gas setup, nesting software, rotary attachment consultation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e active laser-cutting catalog line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequest a quote\u003c\/strong\u003e for source brand, thickness targets, gas setup, software package, freight, and installation planning.\u003c\/p\u003e","brand":"EtalTec","offers":[{"title":"Default Title","offer_id":53428872151406,"sku":"FL44-6000-FIBER","price":59900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/temporary-placeholder-logo_e8e14785-4fe6-4638-b24e-7ec923f064bd.png?v=1779740668"},{"product_id":"fl44-8000-4x4-open-type-fiber-laser-cutter-8000w","title":"EtalTec FL44-8000 – 4x4 ft Open-Type Fiber Laser Cutter 8000W","description":"\u003cp\u003e\u003cstrong\u003eEtalTec FL44-8000 – 4x4 ft Open-Type Fiber Laser Cutter 8000W\u003c\/strong\u003e is part of the EtalTec \u003cstrong\u003eopen-type 4x4 ft fiber laser cutting\u003c\/strong\u003e line built around the power tiers most commonly compared by U.S. buyers looking for compact sheet-metal cutting systems.\u003c\/p\u003e\u003cp\u003eThis model is positioned for buyers who want a smaller-footprint open table for metal fabrication while still choosing the right power class for their material mix, throughput target, and budget.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking format:\u003c\/strong\u003e open-type 4x4 ft fiber laser cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower class:\u003c\/strong\u003e 8000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e higher-speed compact production, heavier sheet processing, more demanding industrial work\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption pack:\u003c\/strong\u003e auto-focus head, chiller, servo package, fume extraction, assist-gas setup, nesting software, rotary attachment consultation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e active laser-cutting catalog line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequest a quote\u003c\/strong\u003e for source brand, thickness targets, gas setup, software package, freight, and installation planning.\u003c\/p\u003e","brand":"EtalTec","offers":[{"title":"Default Title","offer_id":53428872184174,"sku":"FL44-8000-FIBER","price":74900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/temporary-placeholder-logo_a4a80607-a8e2-4f36-ad6f-c9862c7ea842.png?v=1779740668"},{"product_id":"fl55-6000-5x5-open-type-fiber-laser-cutter-6000w","title":"EtalTec FL55-6000 – 5x5 ft Open-Type Fiber Laser Cutter 6000W","description":"\u003cp\u003e\u003cstrong\u003eEtalTec FL55-6000 – 5x5 ft Open-Type Fiber Laser Cutter 6000W\u003c\/strong\u003e is part of the EtalTec \u003cstrong\u003eopen-type 5x5 ft fiber laser cutting\u003c\/strong\u003e line built around the power tiers most commonly compared by U.S. buyers who want more cutting area than compact 4x4 systems without stepping into full 5x10 platforms.\u003c\/p\u003e\u003cp\u003eThis model is positioned for buyers looking for a mid-format open table with the right laser power for their material thickness, throughput targets, and budget—while keeping a smaller footprint than full-sheet production lasers.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking format:\u003c\/strong\u003e open-type 5x5 ft fiber laser cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower class:\u003c\/strong\u003e 6000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e faster production cutting, thicker material work, and higher-throughput fabrication\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption pack:\u003c\/strong\u003e auto-focus head, chiller, servo package, fume extraction, assist-gas setup, nesting software, tube\/rotary consultation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e active laser-cutting catalog line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequest a quote\u003c\/strong\u003e for source brand, thickness targets, gas setup, software package, freight, and installation planning.\u003c\/p\u003e","brand":"EtalTec","offers":[{"title":"Default Title","offer_id":53428880834926,"sku":"FL55-6000-FIBER","price":64900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/ChatGPTImageMay25_2026_09_22_42AM.png?v=1779726170"},{"product_id":"fl55-8000-5x5-open-type-fiber-laser-cutter-8000w","title":"EtalTec FL55-8000 – 5x5 ft Open-Type Fiber Laser Cutter 8000W","description":"\u003cp\u003e\u003cstrong\u003eEtalTec FL55-8000 – 5x5 ft Open-Type Fiber Laser Cutter 8000W\u003c\/strong\u003e is part of the EtalTec \u003cstrong\u003eopen-type 5x5 ft fiber laser cutting\u003c\/strong\u003e line built around the power tiers most commonly compared by U.S. buyers who want more cutting area than compact 4x4 systems without stepping into full 5x10 platforms.\u003c\/p\u003e\u003cp\u003eThis model is positioned for buyers looking for a mid-format open table with the right laser power for their material thickness, throughput targets, and budget—while keeping a smaller footprint than full-sheet production lasers.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking format:\u003c\/strong\u003e open-type 5x5 ft fiber laser cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower class:\u003c\/strong\u003e 8000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e compact higher-power production, heavier sheet processing, and more demanding industrial cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption pack:\u003c\/strong\u003e auto-focus head, chiller, servo package, fume extraction, assist-gas setup, nesting software, tube\/rotary consultation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e active laser-cutting catalog line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequest a quote\u003c\/strong\u003e for source brand, thickness targets, gas setup, software package, freight, and installation planning.\u003c\/p\u003e","brand":"EtalTec","offers":[{"title":"Default Title","offer_id":53428880867694,"sku":"FL55-8000-FIBER","price":82900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/ChatGPTImageMay25_2026_09_18_33AM.png?v=1779725922"},{"product_id":"fl48-6000f-open-type-4x8-fiber-laser-6000w","title":"EtalTec FL48-6000F – Fast-Cut Open 4x8 Fiber Laser 6000W","description":"\u003cp\u003e\u003cstrong\u003eEtalTec FL48-6000F – Fast-Cut Open 4x8 Fiber Laser 6000W\u003c\/strong\u003e is part of the EtalTec \u003cstrong\u003eopen-type 4x8 ft fiber laser cutting\u003c\/strong\u003e line designed around the power classes most often compared by U.S. fabrication shops.\u003c\/p\u003e\u003cp\u003eInstead of presenting this as a generic template machine, this model is positioned as a distinct buying tier for U.S. buyers who compare speed, material thickness, power budget, and production workload on a full-sheet 4x8 open table.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking format:\u003c\/strong\u003e open-type 4x8 ft fiber laser cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower class:\u003c\/strong\u003e 6000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial positioning:\u003c\/strong\u003e Fast-Cut Open 4x8 Fiber Laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e higher-throughput fab shops cutting thicker material with faster cycle times\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption pack:\u003c\/strong\u003e auto-focus head, nesting software, chiller, fume extraction, servo package, gas console, auto nozzle cleaning, rotary\/tube consultation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e active laser-cutting catalog line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequest a quote\u003c\/strong\u003e for source brand, gas setup, thickness targets, software package, installation scope, and throughput planning.\u003c\/p\u003e","brand":"EtalTec","offers":[{"title":"Default Title","offer_id":53428882276718,"sku":"FL48-6000F-FIBER","price":74900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/temporary-placeholder-logo_10cf6dd9-81c2-407c-a858-1c46a8ee8e38.png?v=1779740671"},{"product_id":"fl48-8000i-open-type-4x8-fiber-laser-8000w","title":"EtalTec FL48-8000I – Industrial Open 4x8 Fiber Laser 8000W","description":"\u003cp\u003e\u003cstrong\u003eEtalTec FL48-8000I – Industrial Open 4x8 Fiber Laser 8000W\u003c\/strong\u003e is part of the EtalTec \u003cstrong\u003eopen-type 4x8 ft fiber laser cutting\u003c\/strong\u003e line designed around the power classes most often compared by U.S. fabrication shops.\u003c\/p\u003e\u003cp\u003eInstead of presenting this as a generic template machine, this model is positioned as a distinct buying tier for U.S. buyers who compare speed, material thickness, power budget, and production workload on a full-sheet 4x8 open table.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking format:\u003c\/strong\u003e open-type 4x8 ft fiber laser cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower class:\u003c\/strong\u003e 8000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial positioning:\u003c\/strong\u003e Industrial Open 4x8 Fiber Laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e industrial sheet processing, stronger productivity targets, heavier-duty compact production\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption pack:\u003c\/strong\u003e auto-focus head, nesting software, chiller, fume extraction, servo package, gas console, auto nozzle cleaning, rotary\/tube consultation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e active laser-cutting catalog line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequest a quote\u003c\/strong\u003e for source brand, gas setup, thickness targets, software package, installation scope, and throughput planning.\u003c\/p\u003e","brand":"EtalTec","offers":[{"title":"Default Title","offer_id":53428882309486,"sku":"FL48-8000I-FIBER","price":93900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/temporary-placeholder-logo_26b0d6c7-8fe2-4a64-8abd-ce76f750f9cc.png?v=1779740693"},{"product_id":"fl510-6000-production-5x10-open-fiber-laser","title":"EtalTec 6kW 5x10 Open Fiber Laser Cutter","description":"\u003cp\u003e\u003cstrong\u003eEtalTec FL510-6000-PRODUCTION – Full-Sheet Production Fiber Laser 5x10 6000W\u003c\/strong\u003e is part of the EtalTec \u003cstrong\u003eopen-type fiber laser line for sizes we had not covered earlier\u003c\/strong\u003e—from compact in-house systems to bigger full-sheet and long-bed industrial platforms.\u003c\/p\u003e\u003cp\u003eThis model is not presented as a generic size\/power template. It is positioned for the \u003cstrong\u003eserious production-grade full-sheet fabrication\u003c\/strong\u003e buyer, where real U.S. demand depends on floor space, material size, power budget, and how much production has to move in-house.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking format:\u003c\/strong\u003e 5x10 open-type fiber laser cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower class:\u003c\/strong\u003e 6000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial positioning:\u003c\/strong\u003e Full-Sheet Production Fiber Laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e higher-throughput full-sheet production with stronger speed and thickness capability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption pack:\u003c\/strong\u003e auto-focus head, nesting software, gas console, fume extraction, dust collection, tube\/rotary consultation, installation planning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e active laser-cutting catalog line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequest a quote\u003c\/strong\u003e for source brand, gas package, software, thickness targets, shop footprint, freight, and installation scope.\u003c\/p\u003e","brand":"EtalTec","offers":[{"title":"Default Title","offer_id":53428887290222,"sku":"FL510-6000-PRODUCTION","price":83000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/temporary-placeholder-logo_0cb91a14-59ed-4dda-8434-54cb85478772.png?v=1779740734"},{"product_id":"fl613-8000-highpower-6-5x13-open-fiber-laser","title":"EtalTec FL613-8000-HIGHPOWER – BigSheet High-Power Open Fiber Laser 6.5x13 8000W","description":"\u003cp\u003e\u003cstrong\u003eEtalTec FL613-8000-HIGHPOWER – BigSheet High-Power Open Fiber Laser 6.5x13 8000W\u003c\/strong\u003e is part of the EtalTec \u003cstrong\u003eopen-type fiber laser line for sizes we had not covered earlier\u003c\/strong\u003e—from compact in-house systems to bigger full-sheet and long-bed industrial platforms.\u003c\/p\u003e\u003cp\u003eThis model is not presented as a generic size\/power template. It is positioned for the \u003cstrong\u003ebig-sheet fabrication \/ growing industrial throughput\u003c\/strong\u003e buyer, where real U.S. demand depends on floor space, material size, power budget, and how much production has to move in-house.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking format:\u003c\/strong\u003e 6.5x13 open-type fiber laser cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower class:\u003c\/strong\u003e 8000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial positioning:\u003c\/strong\u003e BigSheet High-Power Open Fiber Laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e larger-format high-power cutting when sheet size and speed both drive the buying decision\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption pack:\u003c\/strong\u003e auto-focus head, nesting software, gas console, fume extraction, dust collection, tube\/rotary consultation, installation planning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e active laser-cutting catalog line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequest a quote\u003c\/strong\u003e for source brand, gas package, software, thickness targets, shop footprint, freight, and installation scope.\u003c\/p\u003e","brand":"EtalTec","offers":[{"title":"Default Title","offer_id":53428887355758,"sku":"FL613-8000-HIGHPOWER","price":106452.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/temporary-placeholder-logo_2696000f-f503-4f83-97c4-7bd71a7b1c00.png?v=1779740735"},{"product_id":"fl620-6000-longbed-6-5x20-open-fiber-laser","title":"EtalTec FL620-6000-LONGBED – LongBed Open Fiber Laser 6.5x20 6000W","description":"\u003cp\u003e\u003cstrong\u003eEtalTec FL620-6000-LONGBED – LongBed Open Fiber Laser 6.5x20 6000W\u003c\/strong\u003e is part of the EtalTec \u003cstrong\u003eopen-type fiber laser line for sizes we had not covered earlier\u003c\/strong\u003e—from compact in-house systems to bigger full-sheet and long-bed industrial platforms.\u003c\/p\u003e\u003cp\u003eThis model is not presented as a generic size\/power template. It is positioned for the \u003cstrong\u003elong-bed industrial fabrication \/ higher-output plate processing\u003c\/strong\u003e buyer, where real U.S. demand depends on floor space, material size, power budget, and how much production has to move in-house.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking format:\u003c\/strong\u003e 6.5x20 open-type fiber laser cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower class:\u003c\/strong\u003e 6000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial positioning:\u003c\/strong\u003e LongBed Open Fiber Laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e long-bed industrial cutting, larger plate, infrastructure and heavy fabrication workflows\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption pack:\u003c\/strong\u003e auto-focus head, nesting software, gas console, fume extraction, dust collection, tube\/rotary consultation, installation planning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e active laser-cutting catalog line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequest a quote\u003c\/strong\u003e for source brand, gas package, software, thickness targets, shop footprint, freight, and installation scope.\u003c\/p\u003e","brand":"EtalTec","offers":[{"title":"Default Title","offer_id":53428887388526,"sku":"FL620-6000-LONGBED","price":92583.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/temporary-placeholder-logo_229645b2-be5b-48a8-8925-6c38a9564e3d.png?v=1779740735"},{"product_id":"enc510-6000-shiftrun-enclosed-fiber-laser","title":"EtalTec ENC510-6000-SHIFTRUN – ShiftRun Enclosed Production Laser 5x10 6000W","description":"\u003cp\u003e\u003cstrong\u003eEtalTec ENC510-6000-SHIFTRUN – ShiftRun Enclosed Production Laser 5x10 6000W\u003c\/strong\u003e is part of the EtalTec \u003cstrong\u003eenclosed fiber lasers large high power\u003c\/strong\u003e line built for buyers who want safer, faster, and more production-focused metal cutting than open-table systems.\u003c\/p\u003e\u003cp\u003eThis model is positioned for the \u003cstrong\u003efull-sheet enclosed multi-shift production \/ safer daily fabrication\u003c\/strong\u003e segment, where U.S. buyers compare enclosure safety, exchange-table uptime, power class, and how aggressively they want to scale daily output.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking format:\u003c\/strong\u003e enclosed 5x10 production fiber laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower class:\u003c\/strong\u003e 6000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial positioning:\u003c\/strong\u003e ShiftRun Enclosed Production Laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e safer full-sheet cabinets, panels, signage, enclosure work, and consistent multi-shift job-shop production\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption pack:\u003c\/strong\u003e automatic exchange pallet, full enclosure, auto nozzle cleaning, high-pressure gas console, fume extraction, rotary\/tube option, automation consultation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e active enclosed production laser line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequest a quote\u003c\/strong\u003e for source brand, automation level, thickness targets, software package, gas setup, and installation planning.\u003c\/p\u003e","brand":"EtalTec","offers":[{"title":"Default Title","offer_id":53428892369262,"sku":"ENC510-6000-SHIFTRUN","price":54900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/temporary-placeholder-logo_000cde29-d206-41b0-8e50-efc539343c42.png?v=1779740739"},{"product_id":"enc612-6000-bigsheet-enclosed-fiber-laser","title":"EtalTec 6kW Enclosed 6x12 Fiber Laser","description":"\u003ch2\u003e6kW Enclosed 6x12 Fiber Laser Cutter for U.S. Big-Sheet Cutting\u003c\/h2\u003e\u003cp\u003eThe EtalTec ENC612-6000 BigSheet is a \u003cstrong\u003e6kW enclosed 6x12 fiber laser cutter\u003c\/strong\u003e for U.S. fabrication shops, manufacturers, and metalworking businesses that need larger sheet capacity with a more contained machine layout.\u003c\/p\u003e\u003cp\u003eA 6x12 ft table gives shops more room than standard 4x8 ft or 5x10 ft systems, making it a practical fit for larger panels, longer parts, bigger nests, and production work where table size matters. The 6kW power level is positioned for shops that want strong daily cutting capacity while keeping the overall investment below higher-power 12kW, 20kW, or 30kW systems.\u003c\/p\u003e\u003ch3\u003eBest Fit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eU.S. shops needing enclosed 6x12 ft cutting capacity\u003c\/li\u003e\n\u003cli\u003eFabrication teams cutting larger sheets, panels, and production parts\u003c\/li\u003e\n\u003cli\u003eManufacturers working with steel, stainless, aluminum, and sheet metal\u003c\/li\u003e\n\u003cli\u003eBuyers comparing 5x10 vs 6x12 fiber laser table sizes\u003c\/li\u003e\n\u003cli\u003eCompanies comparing machine price, delivery, compressor, installation, training, support, and financing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy Choose 6x12\u003c\/h3\u003e\u003cp\u003eA 6x12 ft enclosed fiber laser can be a strong choice when your shop needs more table capacity than a 5x10 system. If your production requires faster cutting or heavier daily output, a 12kW or higher system may be the better recommendation.\u003c\/p\u003e\u003ch3\u003eRequest a Delivered Quote\u003c\/h3\u003e\u003cp\u003eSend your material type, maximum thickness, daily production thickness, ZIP code, timeline, and whether you need a compressor, installation, training, or financing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour quote can include machine configuration, freight, compressor options, installation, startup, operator training, support, and financing options for qualified buyers.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFinancing is available for qualified buyers, typically with 24 to 60 month options, subject to approval and lender terms.\u003c\/p\u003e\u003cp\u003eFinal pricing, stock, freight, taxes, configuration, accessories, and delivery timing must be confirmed before invoice.\u003c\/p\u003e","brand":"EtalTec","offers":[{"title":"Default Title","offer_id":53428892434798,"sku":"ENC612-6000-BIGSHEET","price":83000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/temporary-placeholder-logo_ece0da61-51b0-4dec-85ba-0fb05916f624.png?v=1779740740"},{"product_id":"stce510-6000-multishift-enclosed-sheet-tube-laser","title":"EtalTec STCE510-6000-MULTISHIFT – MultiShift Full-Sheet Tube Combo Enclosed 5x10 Sheet+Tube Laser 6000W","description":"\u003cp\u003e\u003cstrong\u003eEtalTec STCE510-6000-MULTISHIFT – MultiShift Full-Sheet Tube Combo Enclosed 5x10 Sheet+Tube Laser 6000W\u003c\/strong\u003e is part of the EtalTec \u003cstrong\u003esheet + tube enclosed production line\u003c\/strong\u003e built for shops that want one enclosed system to cover both flat-sheet cutting and tube work.\u003c\/p\u003e\u003cp\u003eThis model is positioned for the \u003cstrong\u003emulti-shift enclosed hybrid production where flat sheet and tube both drive machine ROI\u003c\/strong\u003e segment, where U.S. buyers compare whether it is more economical to consolidate sheet and tube into one platform rather than running separate machines and workflows.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking format:\u003c\/strong\u003e enclosed 5x10 sheet + tube production laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower class:\u003c\/strong\u003e 6000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial positioning:\u003c\/strong\u003e MultiShift Full-Sheet Tube Combo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e multi-shift hybrid production when sheet demand and tube demand both justify a higher-capacity enclosed combo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption pack:\u003c\/strong\u003e tube chuck package, enclosed cover, auto-focus head, nesting for sheet+tube, gas console, automation consultation, loading\/unloading review\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e active sheet+tube production line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequest a quote\u003c\/strong\u003e for tube diameter range, sheet thickness targets, source brand, software package, automation scope, and installation planning.\u003c\/p\u003e","brand":"EtalTec","offers":[{"title":"Default Title","offer_id":53428903084398,"sku":"STCE510-6000-MULTISHIFT","price":219000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/temporary-placeholder-logo_43169d2d-88ee-4be4-8a6f-321e845ff8aa.png?v=1779740769"},{"product_id":"ext48-6000-production-exchange-table-tube-laser","title":"EtalTec EXT48-6000-PRODUCTION – Production Exchange + Tube Laser Enclosed 4x8 Exchange-Table + Tube Laser 6000W","description":"\u003cp\u003e\u003cstrong\u003eEtalTec EXT48-6000-PRODUCTION – Production Exchange + Tube Laser Enclosed 4x8 Exchange-Table + Tube Laser 6000W\u003c\/strong\u003e is part of the EtalTec \u003cstrong\u003eexchange-table + tube production line\u003c\/strong\u003e built for shops that want to combine higher sheet throughput with tube cutting flexibility in one enclosed system.\u003c\/p\u003e\u003cp\u003eThis model is positioned for the \u003cstrong\u003ehigher-speed compact production buyer combining sheet automation with tube capability\u003c\/strong\u003e segment, where buyers are not only comparing power—they are comparing pallet exchange uptime, tube processing value, and whether one hybrid production machine can replace multiple workflow bottlenecks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking format:\u003c\/strong\u003e enclosed 4x8 exchange-table sheet + tube laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower class:\u003c\/strong\u003e 6000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial positioning:\u003c\/strong\u003e Production Exchange + Tube Laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e faster compact production with better material flow and stronger mixed-work flexibility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption pack:\u003c\/strong\u003e dual exchange pallets, rotary tube module, enclosed cover, auto-focus head, auto nozzle cleaning, gas console, automation consultation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e active exchange-table + tube production line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequest a quote\u003c\/strong\u003e for tube diameter range, pallet cycle goals, source brand, software package, automation level, and installation planning.\u003c\/p\u003e","brand":"EtalTec","offers":[{"title":"Default Title","offer_id":53428905574766,"sku":"EXT48-6000-PRODUCTION","price":79800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/temporary-placeholder-logo_483ea907-469c-4e69-b950-0073cdf216cd.png?v=1779740769"}],"url":"https:\/\/umprotech.com\/es\/collections\/production-laser-cutting-systems-usa.oembed?page=3","provider":"UmproTech","version":"1.0","type":"link"}