{"title":"All Fiber Laser Cutting Machines | UmproTech","description":"\u003ch2\u003eFiber Laser Cutting Machines for U.S. Fabrication Shops\u003c\/h2\u003e\u003cp\u003eBrowse fiber laser cutting machines for U.S. metal fabrication, sheet metal, job shop, manufacturing, signage, HVAC, structural, and production cutting applications. This collection is focused on actual laser cutting machine platforms, not consumables or replacement parts.\u003c\/p\u003e\u003ch3\u003eChoose by Application\u003c\/h3\u003e\u003cp\u003eStart with material type, thickness, table size, required power, production volume, floor space, enclosure preference, automation needs, and delivery ZIP code. Common options include compact 1515\/5x5 systems, 5x10 sheet lasers, 5x13 sheet lasers, open-table lasers, enclosed lasers, sheet-and-tube machines, tube lasers, and high-power production systems.\u003c\/p\u003e\u003ch3\u003eCommon Buyer Paths\u003c\/h3\u003e\u003cp\u003e3kW machines are often a practical lower-cost entry point for thinner sheet and budget-conscious shops. 6kW machines are a stronger production option for shops needing more speed and thickness range. 12kW and higher systems are better suited for heavy production and thicker material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRequest a delivered quote with material, thickness, table size, power target, ZIP code, timeline, and whether you need compressor, chiller, fume extraction, installation, training, service support, or financing.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFinancing is available for qualified buyers, typically with 24 to 60 month options, subject to approval and lender terms.\u003c\/p\u003e","products":[{"product_id":"1500-w-laser-cutting-machine-1515-5-ft-5-ft","title":"1500 W Fiber Laser Cutting Machine — 1515 (5 ft × 5 ft)","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003e1515 Fiber Laser Cutting Machine — 1.5 kW, 5 ft × 5 ft Table (60 in × 60 in)\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003eCompact 1.5 kW fiber laser for US job shops\/OEMs needing precise cutting on 5×5 sheets in tight floor space.\u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eLaser:\u003c\/strong\u003e 1.5 kW · \u003cstrong\u003eWork:\u003c\/strong\u003e 60×60 in (1524×1524 mm) · \u003cstrong\u003eAccuracy:\u003c\/strong\u003e ±0.03 mm\/m · \u003cstrong\u003eRepeat:\u003c\/strong\u003e ±0.02 mm\u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e 480V 3PH 60Hz · \u003cstrong\u003eMaterials:\u003c\/strong\u003e MS\/SS\/Al · \u003cstrong\u003eBest for:\u003c\/strong\u003e fabrication, HVAC, contract mfg\u003c\/p\u003e\n  \u003c\/header\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--overview\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eBuilt for US sheet sizes, power, and workflows\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e\n\u003cstrong\u003e5×5 format:\u003c\/strong\u003e ideal for blanks, partial sheets, and remnants without a large 5×10 footprint.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eUS electrical:\u003c\/strong\u003e 480V standard; 208–240V via transformer\/step-down.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCompact cell:\u003c\/strong\u003e ~10×8 ft footprint + clearance; easy to place near press brakes\/weld cells.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDXF\/DWG workflow:\u003c\/strong\u003e CNC nesting (CypCut\/FSCUT class) with English UI and part libraries.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eShop-ready:\u003c\/strong\u003e enclosure options, fume ports, E-stops; supports OSHA-minded guarding\/extraction plans.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey specs\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCut capacity (typical):\u003c\/strong\u003e Mild steel 10–12 mm (3\/8–1\/2\") · Stainless 4–5 mm (3\/16–1\/4\") · Aluminum 3–4 mm (1\/8–5\/32\").\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMotion:\u003c\/strong\u003e 80–100 m\/min rapids (260–330 ft\/min), 0.8–1.2 g accel; dual rack \u0026amp; pinion X\/Y, ballscrew Z, AC servos.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eHead:\u003c\/strong\u003e auto-focus + capacitive height control + collision protection.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eGases:\u003c\/strong\u003e O\u003csub\u003e2\u003c\/sub\u003e (speed MS) · N\u003csub\u003e2\u003c\/sub\u003e (clean SS) · Air (low cost).\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e industrial external chiller.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e ~3–5 t (6,600–11,000 lb).\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eOptions \u0026amp; support\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBase package:\u003c\/strong\u003e 1.5 kW laser + single 5×5 table + CNC nesting + chiller + fume connection ports.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eShuttle table:\u003c\/strong\u003e higher throughput load\/unload while cutting.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePlanning help:\u003c\/strong\u003e power\/transformer, gas, extraction, layout, rigging, and operator training.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e in-stock or typical build\/ship ~40 days (configuration dependent).\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--faq\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eFAQ\u003c\/h3\u003e\n    \u003cdetails class=\"umpro-product__faq-item\"\u003e\n      \u003csummary\u003e\u003cstrong\u003eIs 1.5 kW enough?\u003c\/strong\u003e\u003c\/summary\u003e\n      \u003cp\u003eIdeal for thin-to-mid gauge work and fast turnaround parts; go higher power if most work is thick plate or very high volume.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails class=\"umpro-product__faq-item\"\u003e\n      \u003csummary\u003e\u003cstrong\u003eWhy 5×5 vs 5×10?\u003c\/strong\u003e\u003c\/summary\u003e\n      \u003cp\u003eSmaller footprint and lower cost when you mainly run blanks\/remnants and medium-size parts.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails class=\"umpro-product__faq-item\"\u003e\n      \u003csummary\u003e\u003cstrong\u003eWhat’s needed before install?\u003c\/strong\u003e\u003c\/summary\u003e\n      \u003cp\u003e3-phase power (usually 480V), assist gas, fume extraction, and adequate concrete floor. We provide a pre-install checklist.\u003c\/p\u003e\n    \u003c\/details\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"UmproTech","offers":[{"title":"in stock","offer_id":52963707978094,"sku":"FL-1515-1500W","price":35999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/3000-w-fiber-laser-cutting-machine-1515-5-ft-5-ft-table-8461659.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-2kw-4x4ft","title":"Umprotech Enclosed Fiber Laser Cutter 2kW 4x4ft FSCUT","description":"\u003csection class=\"umpro-product\"\u003e\u003cheader class=\"umpro-product__hero\"\u003e\n\u003ch2 class=\"umpro-product__title\"\u003eUmprotech Enclosed Fiber Laser Cutter – 2 kW · 4×4 ft · FSCUT\u003c\/h2\u003e\n\u003cp class=\"umpro-product__subtitle\"\u003eA compact, fully enclosed fiber laser system engineered for US job shops, OEMs, and fabrication cells that need clean, repeatable sheet cutting in a smaller footprint. Sized for 4×4 ft blanks and high-mix production, this machine combines 2 kW fiber power, FSCUT control, and CypCut CAM for dependable throughput, accurate nesting, and stable edge quality on steel, stainless, aluminum, and brass.\u003c\/p\u003e\n\u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 2 kW · \u003cstrong\u003eBed size:\u003c\/strong\u003e 4×4 ft (48×48\") · \u003cstrong\u003eController:\u003c\/strong\u003e FSCUT with CypCut · \u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1\u003c\/p\u003e\n\u003c\/header\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n\u003cp\u003eThis 2 kW, 4×4 ft enclosed fiber laser is built for \u003cstrong\u003ereal job shop conditions\u003c\/strong\u003e—limited floor space, high-mix part flow, and the need to go from DXF to finished parts with minimum hand-holding. It combines \u003cstrong\u003eClass 1 safety\u003c\/strong\u003e, proven controller hardware, and a robust cutting head to support both prototyping and day-to-day production.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 kW fiber source (Raycus or IPG):\u003c\/strong\u003e stable, maintenance-light power for typical job-shop thickness ranges in carbon steel, stainless, aluminum, and brass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4×4 ft (48×48\") working area:\u003c\/strong\u003e ideal for panels, brackets, covers, enclosures, and nested small parts without committing space to a full 5×10 system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully enclosed, Class 1 safety design:\u003c\/strong\u003e light-tight housing with interlocked doors improves operator safety and keeps laser operations compliant in mixed-use facilities and schools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFSCUT controller + CypCut CAM:\u003c\/strong\u003e proven industrial control stack with automatic nesting, micro-joints, lead-in\/lead-out control, and real-time cut monitoring for high-mix workflows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e automatically tracks material surface and adjusts focus length, compensating for sheet warp and gauge changes to maintain kerf width and edge quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssist gas flexibility:\u003c\/strong\u003e supports nitrogen, oxygen, and shop air so you can choose between maximum edge quality, maximum speed, or lowest operating cost per part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated fume extraction \u0026amp; chiller:\u003c\/strong\u003e packaged thermal management and filtration reduce integration work, maintain beam stability, and help keep the surrounding shop clean.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for high-mix production:\u003c\/strong\u003e short setup times, easy program recall, and reliable pierce behavior make it a good fit for contract shops, OEM prototyping cells, and dedicated part families.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech enclosed 2 kW fiber laser is configured as a \u003cstrong\u003ecomplete cutting cell\u003c\/strong\u003e in a compact footprint: fiber source, cutting head, motion system, controller, chiller, and fume extraction are all matched for stable 24\/7-capable operation when installed and maintained correctly.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__specs-grid\"\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eLaser source:\u003c\/strong\u003e 2 kW fiber (Raycus or IPG)\u003c\/p\u003e\n\u003cp\u003eIndustrial fiber laser with long service life, good beam quality, and low maintenance requirements. Power level is well-suited to typical sheet gauges in job-shop environments without excessive operating cost.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eWorking area \/ bed size:\u003c\/strong\u003e 4×4 ft (48×48\")\u003c\/p\u003e\n\u003cp\u003eSupports standard quarter-sheet sizes and a wide range of nests for smaller parts. The compact bed size helps keep motion system stiffness high while minimizing footprint and material handling distances.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eController \u0026amp; CAM:\u003c\/strong\u003e FSCUT with CypCut\u003c\/p\u003e\n\u003cp\u003eIndustry-standard controller and software stack with import support for DXF, DWG, and other formats, automatic nesting, micro-joint placement, pierce control, corner smoothing, and path simulation prior to cutting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Auto-focus fiber head\u003c\/p\u003e\n\u003cp\u003eMotorized focus adjustment allows fast switching between thicknesses and materials. Automatic height sensing maintains standoff over warped sheets, improving pierce reliability and edge consistency on real-world stock.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1\u003c\/p\u003e\n\u003cp\u003eLight-tight enclosure with interlocked access doors and large viewing windows (with appropriate protective glass). Designed to reduce stray reflections and contain fumes when used with the included extraction system.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eFume extraction:\u003c\/strong\u003e Integrated\u003c\/p\u003e\n\u003cp\u003eMulti-point extraction under the cutting area helps remove smoke and particulate at the source, improving cut quality, lens life, and general shop cleanliness when properly ducted and maintained.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eCooling:\u003c\/strong\u003e Industrial chiller included\u003c\/p\u003e\n\u003cp\u003eDedicated chiller maintains stable operating temperature for the fiber source and cutting head, which is critical for consistent beam quality, focus behavior, and component longevity over long shifts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eAssist gas system:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e \/ O\u003csub\u003e2\u003c\/sub\u003e \/ air\u003c\/p\u003e\n\u003cp\u003eConfigurable for high-pressure nitrogen (bright, oxide-free edges on stainless and aluminum), oxygen (fast carbon steel cutting with small kerf), and shop air (cost-effective cutting for non-cosmetic parts).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eTypical cut range (reference only):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRepresentative thickness ranges for 2 kW (actual capacity depends on material, quality requirements, and setup): \u003cbr\u003e· Carbon steel – thin to mid-gauge plate in nitrogen or oxygen \u003cbr\u003e· Stainless – typical sheet gauges for enclosures and brackets \u003cbr\u003e· Aluminum – common thicknesses for covers and panels \u003cbr\u003e· Brass – typical signage and hardware thickness ranges\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"umpro-product__note\"\u003e\u003cem\u003e Important: final cutting thickness\/quality limits depend on material grade, assist gas purity\/pressure, nozzle selection, and cut parameters. Always verify critical jobs with sample runs and cut charts. \u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n\u003cp\u003eThis 2 kW, 4×4 ft fiber laser is designed as a \u003cstrong\u003eworkhorse for small and medium blanks\u003c\/strong\u003e, prototyping, and high-mix work. It can operate as a standalone cutting cell or sit upstream of press brakes, machining, and welding in a broader fabrication workflow.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral fabrication:\u003c\/strong\u003e brackets, gussets, flanges, tabs, base plates, and light structural details for machinery and construction projects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosures \u0026amp; panels:\u003c\/strong\u003e electrical and control panels, small cabinets, covers, machine guards, and HVAC components up to 4×4 ft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM and contract parts:\u003c\/strong\u003e nested part families for OEMs and contract manufacturing where repeatable edge quality and hole accuracy are required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignage \u0026amp; branding:\u003c\/strong\u003e letters, logos, and decorative panels in carbon steel, stainless, or brass, prepared for finishing or direct installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrototyping \u0026amp; engineering changes:\u003c\/strong\u003e fast iteration on new designs without waiting for external laser capacity—especially valuable for R\u0026amp;D cells or pilot lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated cells:\u003c\/strong\u003e pairs naturally with press brakes, hardware insertion, and welding stations for a closed-loop “cut–form–weld” workflow within a compact floor area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 2 kW enclosed fiber laser is offered as a \u003cstrong\u003ecomplete, ready-to-run system\u003c\/strong\u003e with scope tailored for US shops. Configuration choices allow you to balance cost, brand preferences, and performance needs.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser source options:\u003c\/strong\u003e Raycus or IPG fiber sources at 2 kW, selected based on your brand preference, support strategy, and budget.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl stack:\u003c\/strong\u003e FSCUT controller with CypCut CAM is standard, providing a familiar environment for many US laser operators and technicians.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssist gas setup:\u003c\/strong\u003e plumb for nitrogen, oxygen, and\/or dry shop air depending on your cut quality requirements and operating cost targets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting head:\u003c\/strong\u003e auto-focus head standard on all configurations; nozzle and lens packages selected according to material mix and typical thicknesses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure \u0026amp; extraction:\u003c\/strong\u003e full-cover housing with integrated fume extraction and industrial chiller are included to simplify installation and maintain safety.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegration options:\u003c\/strong\u003e consult for material handling, racks, and cell layout recommendations when combining the laser with press brakes, welding, or assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--process\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eProcess notes \u0026amp; cutting best practices\u003c\/h3\u003e\n\u003cp\u003eTo get the most from a 2 kW, 4×4 ft fiber system, most shops standardize a small set of \u003cstrong\u003ecutting rules and parameter templates\u003c\/strong\u003e across materials and thicknesses:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatch nozzle and gas to the job:\u003c\/strong\u003e use high-pressure nitrogen for stainless and aluminum where edge appearance and oxide-free surfaces matter; use oxygen on carbon steel when cut speed and cost per part are more critical than cosmetic edge color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDial in pierce routines:\u003c\/strong\u003e separate pierce and cut parameters for thicker materials. Managing pierce height, time, and gas pressure improves reliability and protects the protective window and lens.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse appropriate lead-ins and micro-joints:\u003c\/strong\u003e CypCut supports optimized lead-in shapes and micro-joint placement. Use them to combat small-part tip-up and reduce edge marking on cosmetic faces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandardize parameter libraries:\u003c\/strong\u003e build and maintain a small, trusted parameter library per material and thickness (e.g., “A36-11ga-N2-finish”, “304-14ga-N2-cosmetic”), then lock those into your CypCut database for repeatable results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitor cleanliness:\u003c\/strong\u003e keep nozzles, protective windows, and the cutting table clean. Accumulated slag and spatter degrade cut quality long before the machine “looks dirty” from outside.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerify new materials with test cuts:\u003c\/strong\u003e even within one thickness, different heats and suppliers can cut differently. Run small test coupons and adjust speed, power, and gas to confirm edge quality before committing to long production runs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__note\"\u003e\u003cem\u003e Actual performance and cut quality will depend on your material suppliers, gas supply, maintenance practices, and specific parameter tuning. We recommend building internal “golden sample” parts and parameter sets for your most important materials and thicknesses. \u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n\u003cp\u003eWe partner with US job shops, OEMs, and integrators to make sure the 2 kW enclosed fiber laser is \u003cstrong\u003einstalled correctly, dialed in, and integrated\u003c\/strong\u003e with your real-world workflow—not just set on the floor.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-install review:\u003c\/strong\u003e power (voltage, amperage), floor space, crane\/fork access for installation, fume exhaust routing, and assist gas infrastructure are reviewed before shipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication review:\u003c\/strong\u003e we look at your sample parts, materials, and thickness ranges to confirm that 2 kW and a 4×4 ft bed are a good fit and to recommend nozzle\/gas setups for your mix.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgramming \u0026amp; nesting guidance:\u003c\/strong\u003e support for building CypCut templates, nesting strategies for your common sheet sizes, and best practices for micro-joints and skeleton handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator \u0026amp; maintenance training:\u003c\/strong\u003e onsite or remote training covering safety, daily checks, parameter selection, and basic troubleshooting to reduce unplanned downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOngoing support:\u003c\/strong\u003e assistance with new materials, process optimization, and integration questions as your production mix and volume evolve.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNext step:\u003c\/strong\u003e Send us a selection of your typical parts (DXF\/STEP\/PDF) and material specs, and we’ll help confirm fit, estimate cycle times, and recommend the best configuration of the 2 kW, 4×4 ft enclosed fiber laser for your shop.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966013665646,"sku":"UFL-4x4-2KW-ENC","price":69900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-enclosed-fiber-laser-cutter-12kw-4x4ft-fscut-cypcut-1017946.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-3kw-4x4ft","title":"Umprotech Enclosed Fiber Laser Cutter 3kW 4x4ft FSCUT","description":"\u003csection class=\"umpro-product umpro-product--flagship\"\u003e\u003c!-- HERO \/ OVERVIEW --\u003e\u003cheader class=\"umpro-product__hero\"\u003e\n\u003cp class=\"umpro-product__eyebrow\"\u003eEnclosed Fiber Laser Cutting Cell · Built for US Job Shops\u003c\/p\u003e\n\u003ch2 class=\"umpro-product__title\"\u003eUmprotech Enclosed Fiber Laser Cutter – 3 kW · 4×4 ft · FSCUT \/ CypCut Control · Ready-to-Run Cell\u003c\/h2\u003e\n\u003cp class=\"umpro-product__subtitle\"\u003eCompact, fully enclosed 3 kW fiber laser cutting system engineered for \u003cstrong\u003eprecision sheet metal work\u003c\/strong\u003e, high-mix production, and prototyping cells in US shops. Delivers production-grade cut quality, industrial controls, and a Class 1 safety enclosure in a \u003cstrong\u003e4×4 ft small-format footprint\u003c\/strong\u003e—without stepping down to hobby-class hardware.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__hero-grid\"\u003e\n\u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 3 kW fiber (Raycus \/ IPG) · \u003cstrong\u003eBed size:\u003c\/strong\u003e 4×4 ft (48×48\") · \u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 · \u003cstrong\u003eHead:\u003c\/strong\u003e Auto-focus fiber cutting head\u003c\/p\u003e\n\u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eController:\u003c\/strong\u003e FSCUT with CypCut nesting · \u003cstrong\u003eAssist gas:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e \/ O\u003csub\u003e2\u003c\/sub\u003e \/ dry air · \u003cstrong\u003eScope of supply:\u003c\/strong\u003e Laser + enclosure + chiller + extraction – as a complete cutting cell\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"umpro-product__hero-points\"\u003e\n\u003cli\u003eProduction-grade 3 kW fiber source in a compact 4×4 ft platform\u003c\/li\u003e\n\u003cli\u003eFull Class 1 enclosure with integrated fume extraction and industrial chiller\u003c\/li\u003e\n\u003cli\u003eFSCUT controller + CypCut CAM\/nesting included—no separate CAM required for daily work\u003c\/li\u003e\n\u003cli\u003eAuto-focus head with parameter libraries for repeatable results across operators and shifts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/header\u003e\u003c!-- POSITIONING \/ VALUE FOR US BUYERS --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003ePositioning: a production-grade small-format cutting cell\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 3 kW enclosed fiber laser is designed as a \u003cstrong\u003eflagship small-format cutting cell\u003c\/strong\u003e for job shops, OEMs, and prototyping teams that want:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh mix, short-run capability:\u003c\/strong\u003e fast changeovers, efficient nesting, and parameter libraries that make it practical to run many part numbers per shift without tying up a full-sheet 4×8 or 5×10 machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall footprint, industrial performance:\u003c\/strong\u003e drop an enclosed laser into tight floor plans, mezzanine areas, or near press brake cells without sacrificing controller quality or fiber source stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUS-focused implementation:\u003c\/strong\u003e support, documentation, parameter guidance, and application help oriented around US materials, gas supply norms, and typical job-shop part mixes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn many shops this 4×4 ft, 3 kW cell becomes the \u003cstrong\u003e“flex laser”\u003c\/strong\u003e—handling rush jobs, engineering changes, prototypes, and recurring small parts, while larger portals stay dedicated to full-sheet, high-volume production.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- TECHNICAL OVERVIEW \/ PERFORMANCE --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--performance\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eTechnical performance at a glance\u003c\/h3\u003e\n\u003cdiv class=\"umpro-product__metrics-grid\"\u003e\n\u003cdiv class=\"umpro-product__metric\"\u003e\n\u003cp class=\"umpro-product__metric-label\"\u003eTypical cutting range*\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon steel: up to ~5\/8\" (15–16 mm), application dependent\u003c\/li\u003e\n\u003cli\u003eStainless steel: up to ~1\/2\" (12 mm), application dependent\u003c\/li\u003e\n\u003cli\u003eAluminum: up to ~3\/8\" (10 mm), application dependent\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__metric-note\"\u003e*Actual capacity depends on material grade, gas, edge quality and throughput requirements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__metric\"\u003e\n\u003cp class=\"umpro-product__metric-label\"\u003eTypical accuracy envelope*\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePositioning accuracy: suitable for tight internal features and bolt patterns\u003c\/li\u003e\n\u003cli\u003eRepeatability: supports production of recurring part families with consistent fit-up\u003c\/li\u003e\n\u003cli\u003eCut quality: clean edges suitable for powder coating, brushing, or welding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__metric-note\"\u003e*Exact tolerances should be confirmed on your representative parts during trials.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__metric\"\u003e\n\u003cp class=\"umpro-product__metric-label\"\u003eTypical use cases\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrackets, flanges, gussets, and connection plates\u003c\/li\u003e\n\u003cli\u003eSmall panels, box components, and machine covers\u003c\/li\u003e\n\u003cli\u003eLogo plates, signage, and faceplates\u003c\/li\u003e\n\u003cli\u003ePrototyping and low-volume OEM parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c!-- DETAILED TECHNICAL SPECIFICATIONS --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 3 kW enclosed fiber laser is delivered as a \u003cstrong\u003efully integrated cutting cell\u003c\/strong\u003e. Fiber source, motion system, auto-focus head, enclosure, control, extraction, and chiller are engineered to work together with minimal onsite integration—once utilities and exhaust are prepared to specification.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__specs-grid\"\u003e\n\u003c!-- LASER SOURCE --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eLaser source \u0026amp; power\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 3 kW fiber (Raycus or IPG)\u003c\/p\u003e\n\u003cp\u003e3 kW fiber power provides a practical balance between:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eCutting speed on common gauges (10–14 ga) of carbon steel and stainless\u003c\/li\u003e\n\u003cli\u003eMaximum thickness capability for job-shop work\u003c\/li\u003e\n\u003cli\u003eElectrical load, gas consumption, and operating cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProven Raycus\/IPG sources give stable power delivery, consistent piercing, and good beam quality for small internal features and fine detail.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- WORKING ENVELOPE --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eWorking envelope\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eBed size \/ stroke:\u003c\/strong\u003e 4×4 ft (48×48\") nominal working area\u003c\/p\u003e\n\u003cp\u003eThe 4×4 ft envelope is sized for:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eHalf sheets and cut-down blanks\u003c\/li\u003e\n\u003cli\u003eNested small parts for press-brake cells\u003c\/li\u003e\n\u003cli\u003eDedicated tooling or fixture plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGuarding and access are optimized so operators can load blanks and remove finished parts without excessive walking or crane moves.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- CONTROLLER \u0026 SOFTWARE --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eController \u0026amp; CAM \/ nesting\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eControl:\u003c\/strong\u003e FSCUT motion and laser control\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSoftware:\u003c\/strong\u003e CypCut CAM \/ nesting included\u003c\/p\u003e\n\u003cp\u003eThe FSCUT \/ CypCut stack is widely used in industrial laser cutting, offering:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eFast DXF \/ DWG \/ STEP import\u003c\/li\u003e\n\u003cli\u003eAutomatic and interactive nesting for high material utilization\u003c\/li\u003e\n\u003cli\u003eLead-in\/lead-out strategies, micro joints, bridging, and tabbing\u003c\/li\u003e\n\u003cli\u003eCommon-line cutting to reduce pierces and cycle time\u003c\/li\u003e\n\u003cli\u003ePath simulation and sequence optimization before cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOperators can visualize the program, check pierce locations, and adjust cutting order to match workholding or part stability needs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- CUTTING HEAD --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eCutting head \u0026amp; focus control\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eHead:\u003c\/strong\u003e Auto-focus fiber cutting head with capacitive height sensing\u003c\/p\u003e\n\u003cp\u003eMotorized focus axis and built-in height sensing maintain a stable standoff and focal position even with:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eWarped sheets\u003c\/li\u003e\n\u003cli\u003eMaterial thickness changes within a job\u003c\/li\u003e\n\u003cli\u003eRemnants and partial sheets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFocus, gas pressure, and speed parameters are stored as \u003cstrong\u003elibrary presets\u003c\/strong\u003e tied to material and thickness combinations, simplifying daily operation and cross-shift consistency.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ENCLOSURE \u0026 SAFETY --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eEnclosure \u0026amp; safety\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 light-tight housing\u003c\/p\u003e\n\u003cp\u003eThe machine is supplied with:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eInterlocked doors and access points\u003c\/li\u003e\n\u003cli\u003eViewing windows for process monitoring\u003c\/li\u003e\n\u003cli\u003eDedicated cutting compartment separate from operator area\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis layout supports typical US safety expectations, simplifies risk assessment, and helps contain fumes and bright process light within the cutting envelope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- UTILITIES \/ EXTRACTION --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eUtilities, chiller \u0026amp; extraction\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eIntegrated systems:\u003c\/strong\u003e industrial chiller + fume extraction included\u003c\/p\u003e\n\u003cp\u003eThe supplied chiller maintains a stable temperature for:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eLaser source cooling circuit\u003c\/li\u003e\n\u003cli\u003eOptics \/ cutting head cooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe extraction system captures smoke near the cutting zone and connects to your building exhaust or filtration as specified. Detailed utility requirements are provided during pre-install planning.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ASSIST GASES --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eAssist gases \u0026amp; plumbing\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eAssist gases:\u003c\/strong\u003e Nitrogen (N\u003csub\u003e2\u003c\/sub\u003e), Oxygen (O\u003csub\u003e2\u003c\/sub\u003e), and dry air\u003c\/p\u003e\n\u003cp\u003eThe gas system is designed to support three primary strategies:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOxygen:\u003c\/strong\u003e high-speed cutting on carbon steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNitrogen:\u003c\/strong\u003e bright, oxide-free edges on stainless and aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry air:\u003c\/strong\u003e cost-effective cutting where a light oxide color is acceptable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe can advise on regulator selection, storage, and piping based on your expected duty cycle and thickness range.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- MOTION SYSTEM --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eMotion system \u0026amp; structure\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eMotion:\u003c\/strong\u003e servo-driven gantry with precision linear guidance\u003c\/p\u003e\n\u003cp\u003eThe motion platform is designed for:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eSmooth interpolation in corners and small radii\u003c\/li\u003e\n\u003cli\u003eAccurate hole geometry and slot repeatability\u003c\/li\u003e\n\u003cli\u003eStable performance across the full 4×4 ft travel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eServo drives and robust mechanics support continuous duty in production environments, not just intermittent prototyping.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ELECTRICAL \/ FOOTPRINT (HIGH LEVEL) --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eElectrical \u0026amp; footprint (high level)\u003c\/h4\u003e\n\u003cp\u003eDetailed electrical and footprint drawings are provided during specification, but in general the machine is designed for:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eInstallation in typical light manufacturing and fabrication facilities\u003c\/li\u003e\n\u003cli\u003eIntegration with existing 3-phase power and exhaust infrastructure\u003c\/li\u003e\n\u003cli\u003ePlacement near forming, hardware insertion, or welding cells\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRigging, access path, and anchoring requirements are reviewed before order release.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"umpro-product__note\"\u003e\u003cem\u003e Actual cutting capacity and achievable tolerances depend on material grade, assist gas, process parameters, part geometry, and edge-quality requirements. We recommend validating critical jobs with sample parts and approved cut parameters prior to committing final tolerances. \u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- APPLICATIONS \/ USE CASES --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n\u003cp\u003eThe 3 kW, 4×4 ft Umprotech enclosed fiber laser is typically deployed as a \u003cstrong\u003eprecision cutting cell\u003c\/strong\u003e for small and medium-sized parts, or as a dedicated machine for specific product lines. It can operate:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003eAs a stand-alone prototyping and short-run system near engineering and R\u0026amp;D\u003c\/li\u003e\n\u003cli\u003eAlongside press brakes, hardware insertion, and welding cells as a dedicated feeder\u003c\/li\u003e\n\u003cli\u003eWithin a job-shop environment as a flex cell for rush jobs and engineering changes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"umpro-product__usecases-grid\"\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eBrackets, flanges \u0026amp; gussets\u003c\/h4\u003e\n\u003cp\u003eHigh repeatability for hole patterns, bend reliefs, slots, and profiles used in machinery, supports, and frames. Easy to maintain hole-to-edge and hole-to-bend distances for downstream forming.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003ePanels \u0026amp; small enclosures\u003c\/h4\u003e\n\u003cp\u003eFlat patterns for cabinets, junction boxes, covers, and machine panels. Accurate bend locations and features to support fast press-brake setup and consistent assembly fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eSignage, plates \u0026amp; branding\u003c\/h4\u003e\n\u003cp\u003eLogos, text, and decorative geometry in steel, stainless, or aluminum, with edges suitable for brushing, powder coating, or direct installation after basic finishing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eMachine guards \u0026amp; safety components\u003c\/h4\u003e\n\u003cp\u003ePerforated guards, covers, and shields requiring consistent hole geometry, smooth edges, and repeatable fit-up against frames and structures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eHVAC \u0026amp; building hardware\u003c\/h4\u003e\n\u003cp\u003eBrackets, supports, access panels, and mounting hardware where dimensional consistency and clean edges help speed installation and reduce field modifications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eOEM \u0026amp; contract manufacturing\u003c\/h4\u003e\n\u003cp\u003eRecurring part families in steel, stainless, and aluminum with programs, nests, and parameter sets stored in the control for fast changeover and predictable cycle times.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003ePrototyping \u0026amp; engineering changes\u003c\/h4\u003e\n\u003cp\u003eQuick-turn samples from DXF\/STEP, letting design and manufacturing teams validate fit-up, assembly, and ergonomics without waiting on external fabrication or interrupting large-format machines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eDedicated product cells\u003c\/h4\u003e\n\u003cp\u003eDedicated to a single product family or subassembly, often located adjacent to assembly or welding, so parts flow directly from cutting into downstream operations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eIn many facilities this 4×4 ft, 3 kW cutting cell becomes the \u003cstrong\u003e“flex cell”\u003c\/strong\u003e—absorbing small-lot, high-mix work and last-minute changes while larger 4×8 or higher-power machines focus on full-sheet, long-run jobs.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- CONFIGURATIONS \u0026 OPTIONS --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 3 kW 4×4 enclosed fiber laser is offered as a \u003cstrong\u003eready-to-run package\u003c\/strong\u003e. Core components—fiber source, auto-focus head, FSCUT control, enclosure, extraction, and chiller—are standard. Configuration choices help you align the system with your existing standards and infrastructure.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber source options:\u003c\/strong\u003e 3 kW Raycus or IPG. Choose based on your installed base, service strategy, or internal engineering standards for laser sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssist gas configuration:\u003c\/strong\u003e support for nitrogen, oxygen, and dry air. We can review your thickness range, duty cycle, and part mix and recommend appropriate storage, regulation, and distribution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl stack:\u003c\/strong\u003e FSCUT controller with CypCut CAM\/nesting standard—no separate basic CAM purchase required for 2D flat-pattern work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e supplied standard with parameter libraries by material and thickness to reduce operator dependency and shorten training time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated fume extraction \u0026amp; chiller:\u003c\/strong\u003e included to simplify specification and procurement; we provide connection details for your plant exhaust and cooling water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork \u0026amp; integration:\u003c\/strong\u003e options for network connectivity and file transfer, so the machine can pull nests from your CAD\/CAM workflow or receive DXF files directly from engineering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuture automation readiness:\u003c\/strong\u003e the 4×4 table size and enclosure layout are compatible with simple material carts, loading concepts, or dedicated fixtures if you later standardize parts or kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003c!-- IMPLEMENTATION \u0026 SUPPORT --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n\u003cp\u003eWe work with US job shops, OEMs, and prototyping teams to ensure the 3 kW 4×4 enclosed fiber laser is \u003cstrong\u003especified, installed, and supported\u003c\/strong\u003e around real jobs—not just nameplate power and test coupons.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-installation review:\u003c\/strong\u003e we review power, floor space, exhaust routing, gas supply (N\u003csub\u003e2\u003c\/sub\u003e\/O\u003csub\u003e2\u003c\/sub\u003e\/air), rigging, and access paths to avoid surprises at installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart \u0026amp; material assessment:\u003c\/strong\u003e you can send representative DXF\/STEP\/PDF files and thickness ranges; we confirm process windows, assist-gas strategy, and representative cycle times.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCypCut workflow setup:\u003c\/strong\u003e support with programming, nesting defaults, micro-joint strategies, common-line cutting, and parameter library organization to match how your shop releases jobs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator \u0026amp; maintenance training:\u003c\/strong\u003e onsite or remote training covering safe operation, startup\/shutdown, basic troubleshooting, optics care, and routine maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOngoing process support:\u003c\/strong\u003e assistance as you move new parts onto the machine—fine-tuning parameters, exploring new materials, and improving throughput and edge quality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__cta\"\u003e\u003cstrong\u003eNext step:\u003c\/strong\u003e send representative part files (DXF\/STEP\/PDF) and material specifications. We’ll confirm fit, provide sample cut recommendations, and outline a suggested 3 kW 4×4 configuration for your shop layout and part mix.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- TECHNICAL FAQ --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--faq umpro-product-faq\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eTechnical FAQ – 3 kW · 4×4 ft enclosed fiber laser\u003c\/h3\u003e\n\u003cdiv class=\"umpro-product-faq__grid\"\u003e\n\u003c!-- FAQ ITEM --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhat material thickness range can the 3 kW 4×4 laser realistically handle?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003e3 kW is a very practical power level for small and mid-thickness sheet work. As a \u003cem\u003egeneral\u003c\/em\u003e guidance:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eCarbon steel: thin gauge up to roughly 5\/8\" (≈ 15–16 mm), depending on grade and edge-quality needs\u003c\/li\u003e\n\u003cli\u003eStainless steel: thin gauge up to roughly 1\/2\" (≈ 12 mm), depending on cosmetic requirements\u003c\/li\u003e\n\u003cli\u003eAluminum: thin gauge up to roughly 3\/8\" (≈ 10 mm), depending on alloy and surface finish expectations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eExact limits depend on your material supplier, assist gas, and cycle time expectations. We always recommend validating your critical parts with sample cuts and agreed parameter sets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow does the 4×4 ft bed compare to a full 4×8 or 5×10 machine?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eA 4×4 ft table is optimized for \u003cstrong\u003esmall-format work and high-mix jobs\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eShorter material travel and motion distances for many small parts\u003c\/li\u003e\n\u003cli\u003eSmaller footprint and easier enclosure integration\u003c\/li\u003e\n\u003cli\u003eLower rigging and building impact compared to large-format systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor high-volume full-sheet processing you may still choose a 4×8+ machine, but the 4×4 3 kW cell often absorbs rush jobs, prototypes, and small lots more efficiently.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhat does “full-cover, Class 1 enclosure” actually mean for our safety team?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003e“Full-cover, Class 1” means the cutting process is completely enclosed by a light-tight housing during normal operation. Interlocked doors prevent cutting when access doors are open, and viewing windows allow the operator to monitor the process without exposure to laser radiation.\u003c\/p\u003e\n\u003cp\u003eThis type of enclosure simplifies risk assessments and helps align with typical US safety expectations for laser equipment on a busy shop floor.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eIs additional CAM software required beyond CypCut?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eFor standard 2D flat pattern work, \u003cstrong\u003eCypCut is generally sufficient\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eImports DXF\/DWG\/STEP from your CAD\u003c\/li\u003e\n\u003cli\u003eProvides nesting, lead-ins, micro joints, and simulation\u003c\/li\u003e\n\u003cli\u003eOutputs programs directly to the FSCUT controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSome customers still use their existing CAD\/CAM suites for more complex workflows or integration with ERP\/MRP, but for many job shops CypCut is the primary environment for day-to-day programming and nesting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow difficult is it to train new operators on FSCUT + CypCut?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eFSCUT and CypCut are widely used in the industry, so the learning curve is reasonable for operators with basic CNC or CAD experience. Key points:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eParameter libraries reduce guesswork on speed, gas, and focus settings\u003c\/li\u003e\n\u003cli\u003eGraphical interface helps visualize nests, toolpaths, and pierces\u003c\/li\u003e\n\u003cli\u003eMost shops can get operators productive in a relatively short timeframe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur training covers safe operation, job loading, parameter selection, nesting strategies, and basic troubleshooting to get your team up to speed quickly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhat utilities do we need on site before installation?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eFull utility requirements are provided before shipment, but generally you will need:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eSuitable 3-phase electrical supply (voltage and amperage specified in our documents)\u003c\/li\u003e\n\u003cli\u003eAssist gas supply (N\u003csub\u003e2\u003c\/sub\u003e\/O\u003csub\u003e2\u003c\/sub\u003e\/dry air) with regulators and piping\u003c\/li\u003e\n\u003cli\u003eExhaust or filtration connection for the integrated fume extraction\u003c\/li\u003e\n\u003cli\u003eFloor space and access path meeting the rigging requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe review these details during the pre-installation planning stage to avoid surprises on installation day.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow often are optics and nozzles replaced, and what maintenance is typical?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eWear items such as nozzles and protective windows are consumables and are replaced based on usage, material, and care. Typical maintenance includes:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eInspecting and cleaning nozzles and lenses at defined intervals\u003c\/li\u003e\n\u003cli\u003eChecking assist gas filters and lines\u003c\/li\u003e\n\u003cli\u003eVerifying chiller levels and basic system diagnostics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe provide maintenance intervals and checklists as part of the documentation and training package so your team can keep the machine in stable production.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eCan we integrate the laser with our existing CAD\/ERP workflow?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eYes. Most shops integrate the machine by:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eExporting DXF\/DWG\/STEP from CAD tied to part numbers in ERP\/MRP\u003c\/li\u003e\n\u003cli\u003eImporting those files into CypCut for nesting and parameter assignment\u003c\/li\u003e\n\u003cli\u003eUsing network shares or defined folders for file handoff\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe can review your current workflow and suggest a simple, robust handoff process between engineering and the laser cell.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhat is the typical lead time and what happens before the machine ships?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eLead times vary, but before shipment we typically:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eFinalize configuration (laser source, gas strategy, integration details)\u003c\/li\u003e\n\u003cli\u003eReview utilities, floor layout, and rigging requirements\u003c\/li\u003e\n\u003cli\u003eConfirm sample parts and parameter sets where needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis ensures that when the machine arrives, your facility is ready and ramp-up is focused on production parts—not infrastructure surprises.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow do we know if the 3 kW 4×4 configuration is the right fit for our shop?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eThe best way is to look at real parts. We typically:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eReview a sample of your parts (DXF\/STEP\/PDF) and thickness range\u003c\/li\u003e\n\u003cli\u003eDiscuss your volume, mix, and how jobs are released today\u003c\/li\u003e\n\u003cli\u003eIdentify which parts are better suited to this 4×4 flex cell vs. a full-sheet machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFrom there we can outline expected cycle times, recommend gas strategies, and confirm whether a 3 kW 4×4 configuration will cover your priority work.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c\/div\u003e\n\u003cp class=\"umpro-product-faq__closing\"\u003e\u003cstrong\u003eStill have technical questions?\u003c\/strong\u003e Share your part drawings, material grades, and expected quantities. We’ll provide a targeted assessment and configuration recommendation for your specific use case.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966013731182,"sku":"UFL-4x4-3KW-ENC","price":79900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-enclosed-fiber-laser-cutter-12kw-4x4ft-fscut-cypcut-1017946.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-6kw-4x4ft","title":"Umprotech Enclosed Fiber Laser Cutter 6kW 4x4ft | FSCUT CypCut","description":"\u003csection class=\"umpro-product umpro-product--flagship\"\u003e\n  \u003c!-- HERO \/ OVERVIEW --\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003cp class=\"umpro-product__eyebrow\"\u003eEnclosed Fiber Laser Cutting Cell · Compact High-Performance Platform\u003c\/p\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003e\n      Umprotech Enclosed Fiber Laser Cutter – 6 kW · 4×4 ft · FSCUT \/ CypCut\n    \u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003e\n      A fully enclosed, industrial-grade fiber laser cutting system delivering \u003cstrong\u003e6 kW of power\u003c\/strong\u003e on a\n      compact \u003cstrong\u003e4×4 ft (48×48\") bed\u003c\/strong\u003e. Built for US job shops, OEMs, and fabrication cells that need\n      \u003cstrong\u003ehigh-mix, high-precision sheet metal cutting\u003c\/strong\u003e with robust safety, stable process control, and\n      throughput that bridges the gap between entry-level and ultra-high-power systems.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__hero-grid\"\u003e\n      \u003cp class=\"umpro-product__hero-line\"\u003e\n        \u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber (Raycus \/ IPG) ·\n        \u003cstrong\u003eBed size:\u003c\/strong\u003e 4×4 ft (48×48\") ·\n        \u003cstrong\u003eController:\u003c\/strong\u003e FSCUT with CypCut CAM \/ nesting\n      \u003c\/p\u003e\n      \u003cp class=\"umpro-product__hero-line\"\u003e\n        \u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 ·\n        \u003cstrong\u003eHead:\u003c\/strong\u003e Auto-focus fiber cutting head ·\n        \u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e \/ O\u003csub\u003e2\u003c\/sub\u003e \/ dry air (configuration dependent)\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cul class=\"umpro-product__hero-points\"\u003e\n      \u003cli\u003e6 kW fiber power in a compact, fully enclosed 4×4 ft cutting cell\u003c\/li\u003e\n      \u003cli\u003eBalanced performance for thin to mid-thick materials in a small-format footprint\u003c\/li\u003e\n      \u003cli\u003eFSCUT controller with CypCut nesting, simulation, and process control\u003c\/li\u003e\n      \u003cli\u003eAuto-focus head and integrated chiller\/extraction for stable, repeatable results\u003c\/li\u003e\n      \u003cli\u003eIdeal for high-mix, low-volume work and dedicated small-part cells\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/header\u003e\n\n  \u003c!-- POSITIONING \/ VALUE FOR US BUYERS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 6 kW, 4×4 ft enclosed fiber laser is engineered as a\n      \u003cstrong\u003emid-high power small-format cutting cell\u003c\/strong\u003e—a sweet spot between 3 kW entry-class machines and\n      10–12 kW full-sheet platforms. It gives US shops the power to move beyond thin-gauge only work, without the\n      footprint or infrastructure demands of a full 4×8 or 5×10 system.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003e6 kW fiber laser power (Raycus \/ IPG):\u003c\/strong\u003e delivers high cutting speeds on thin and mid-gauge\n        material and strong capability on thicker sections, supporting a wide range of typical job-shop and OEM part\n        families in stainless, carbon steel, aluminum, and brass.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eCompact 4×4 ft (48×48\") bed:\u003c\/strong\u003e optimized for smaller parts, fixtures, and short-run jobs where\n        full-sheet capacity is not required. Easy to locate near press brakes, welding cells, or R\u0026amp;D areas where\n        floor space is limited but throughput and quality still matter.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFull-cover, Class 1 enclosure:\u003c\/strong\u003e fully enclosed, light-tight housing with interlocked doors and\n        integrated viewing windows. Helps safety teams approve installation in shared shop environments and keeps\n        process light and fumes contained to the cutting chamber.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegrated fume extraction \u0026amp; industrial chiller:\u003c\/strong\u003e built-in fume extraction and dedicated\n        chiller support stable operation, clean optics, and a safer work area—especially important in high-duty or\n        multi-shift production environments.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e adapts to sheet warp, material thickness, and surface variations,\n        keeping focus and standoff consistent across the 4×4 ft working area. Reduces dross, minimizes edge variation,\n        and helps maintain cut quality on mixed thickness jobs.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFSCUT controller with CypCut software:\u003c\/strong\u003e widely used industrial control stack, providing\n        intelligent nesting, lead-in\/out optimization, micro joints, corner smoothing, and simulation. Reduces\n        programming time and scrap for high-mix, low-volume work.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eHigh-mix, repeatable production:\u003c\/strong\u003e the 6 kW power level and small-format bed make this an\n        excellent flex cell for job shops and OEMs running frequent changeovers and recurring part families where\n        repeatability, not just raw power, is critical.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eRaycus or IPG source options:\u003c\/strong\u003e select the fiber source that matches your existing installed\n        base, preferred service network, and internal engineering standards.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- PERFORMANCE OVERVIEW --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--performance\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003ePerformance profile: 6 kW power · 4×4 ft reach\u003c\/h3\u003e\n    \u003cp\u003e\n      A 6 kW fiber source on a 4×4 ft platform provides a \u003cstrong\u003ebalanced performance envelope\u003c\/strong\u003e—more than\n      enough power for aggressive cutting on thin and mid-gauge materials, plus useful overhead for thicker sections,\n      all within a compact cell footprint.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__metrics-grid\"\u003e\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eTypical material coverage*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eMild steel: thin gauge up into structural thicknesses, application dependent\u003c\/li\u003e\n          \u003cli\u003eStainless steel: common gauges for panels, enclosures, and process equipment\u003c\/li\u003e\n          \u003cli\u003eAluminum: light and mid-gauge alloys for structural and cosmetic parts\u003c\/li\u003e\n          \u003cli\u003eBrass \/ copper alloys: within defined thickness windows, suitable for many specialty components\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *Exact limits depend on alloy, assist gas, and edge-quality \/ productivity requirements.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eThroughput characteristics*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eSignificantly higher speeds than 2–3 kW systems on many gauges\u003c\/li\u003e\n          \u003cli\u003eReduced pierce times and improved cycle times on heavier sections\u003c\/li\u003e\n          \u003cli\u003eEffective for small-part nests where part counts per hour matter\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *We recommend part- and material-specific cycle time estimates using your nests and process targets.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eQuality \u0026amp; repeatability*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eEdges suitable for welding, painting, or powder coating with proper parameter tuning\u003c\/li\u003e\n          \u003cli\u003eConsistent hole and slot geometry for recurring part families\u003c\/li\u003e\n          \u003cli\u003eStable performance over long runs with correct maintenance and parameter management\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *Final tolerances should be verified using sample cuts on your parts and fixturing.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- DETAILED TECHNICAL SPECIFICATIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 6 kW 4×4 enclosed fiber laser is supplied as a\n      \u003cstrong\u003efully integrated cutting cell\u003c\/strong\u003e. The fiber source, motion platform, auto-focus head, enclosure,\n      extraction, chiller, and control stack are engineered to work together with minimal onsite integration—once\n      utilities and exhaust are prepared to specification.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n\n      \u003c!-- LASER SOURCE --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eLaser power \u0026amp; source\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber (Raycus or IPG)\u003c\/p\u003e\n        \u003cp\u003e\n          6 kW is a strong mid-high power level for a compact cutting cell:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eHigh-speed cutting on common thin and mid-gauge sheets\u003c\/li\u003e\n          \u003cli\u003eEnough overhead for many thicker applications in steel and stainless\u003c\/li\u003e\n          \u003cli\u003eReduced pierce time and more robust cutting on challenging geometries\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Raycus and IPG are proven industrial laser suppliers with stable power delivery and established service\n          networks in production environments.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- WORKING ENVELOPE --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eWorking envelope\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eBed size \/ stroke:\u003c\/strong\u003e 4×4 ft (48×48\") nominal working area\u003c\/p\u003e\n        \u003cp\u003e\n          The compact 4×4 ft working area is ideal for:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eSmall and mid-sized parts, brackets, and panels\u003c\/li\u003e\n          \u003cli\u003eDedicated product cells near forming or welding\u003c\/li\u003e\n          \u003cli\u003ePrototyping cells and engineering labs with limited floor space\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          While it does not handle full 4×8 or 5×10 sheets, it excels at nested small parts and kit-based jobs, often\n          acting as an offload or flex cell alongside larger lasers.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CONTROLLER \/ CAM --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eController \u0026amp; CAM \/ nesting\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eControl:\u003c\/strong\u003e FSCUT industrial motion and laser control\u003c\/p\u003e\n        \u003cp\u003e\u003cstrong\u003eSoftware:\u003c\/strong\u003e CypCut CAM \/ nesting\u003c\/p\u003e\n        \u003cp\u003e\n          FSCUT and CypCut are widely used in production fiber laser systems and provide:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eDXF \/ DWG \/ STEP import from your CAD tools\u003c\/li\u003e\n          \u003cli\u003eAutomatic and interactive nesting for 4×4 ft sheets and blanks\u003c\/li\u003e\n          \u003cli\u003eLead-in\/lead-out strategies, corner smoothing, and micro joints\u003c\/li\u003e\n          \u003cli\u003eCommon-line cutting and bridging to reduce pierces and cycle time\u003c\/li\u003e\n          \u003cli\u003eSimulation and path visualization for process verification\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          The interface supports both high-mix programming and repeat production, with parameter and library structures\n          that help standardize performance across shifts.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CUTTING HEAD --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eCutting head \u0026amp; auto-focus\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Auto-focus fiber cutting head with capacitive height sensing\u003c\/p\u003e\n        \u003cp\u003e\n          The auto-focus cutting head:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eAutomatically adjusts focus for different material thicknesses and types\u003c\/li\u003e\n          \u003cli\u003eMaintains standoff and focus despite sheet warp or surface variation\u003c\/li\u003e\n          \u003cli\u003eHelps keep kerf width and edge appearance consistent across the 4×4 ft table\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Parameter libraries tie focus, gas pressure, and speed to specific material\/thickness combinations, simplifying\n          operation and reducing reliance on trial-and-error.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ENCLOSURE \/ SAFETY --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eEnclosure \u0026amp; safety\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 light-tight housing\u003c\/p\u003e\n        \u003cp\u003e\n          The enclosure is designed for shared shop environments and includes:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eInterlocked access doors that disable cutting when open\u003c\/li\u003e\n          \u003cli\u003eViewing windows for process monitoring without direct exposure\u003c\/li\u003e\n          \u003cli\u003eInternal lighting and clear access to the cutting zone for setup and cleaning\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          This simplifies risk assessments for safety teams and reduces required laser-protection zones around the cell.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- UTILITIES \/ CHILLER \/ EXTRACTION --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eUtilities, chiller \u0026amp; fume extraction\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e industrial chiller and integrated fume extraction system\u003c\/p\u003e\n        \u003cp\u003e\n          The chiller provides stable cooling for:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eLaser source cooling circuit\u003c\/li\u003e\n          \u003cli\u003eOptics and cutting head cooling\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          The extraction system captures process smoke at the cutting zone and routes it to your building exhaust or\n          filtration, helping maintain air quality and reducing contamination on optical surfaces and machine components.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ASSIST GASES --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eAssist gases \u0026amp; strategy\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eAssist gases:\u003c\/strong\u003e Nitrogen (N\u003csub\u003e2\u003c\/sub\u003e), Oxygen (O\u003csub\u003e2\u003c\/sub\u003e), and dry air (configuration dependent)\u003c\/p\u003e\n        \u003cp\u003e\n          Typical strategies include:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003e\n\u003cstrong\u003eOxygen:\u003c\/strong\u003e high-speed cutting on carbon steel with an oxidized edge color\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003eNitrogen:\u003c\/strong\u003e bright, oxide-free edges on stainless and aluminum\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003eDry air:\u003c\/strong\u003e cost-sensitive cutting where a light oxide tint is acceptable\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          We can help estimate gas consumption and recommend cylinder, bulk tank, or compressor-based solutions based\n          on duty cycle, preferred gas strategy, and part mix.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- MOTION SYSTEM --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eMotion system \u0026amp; structure\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eMotion:\u003c\/strong\u003e servo-driven gantry with precision linear guidance\u003c\/p\u003e\n        \u003cp\u003e\n          The motion platform is designed for:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eSmooth interpolation of small radii and tight internal features\u003c\/li\u003e\n          \u003cli\u003eAccurate positioning across the full 4×4 ft working envelope\u003c\/li\u003e\n          \u003cli\u003eStable cut quality under continuous-duty production loads\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Servo drives and robust structural design support the acceleration and speed needed to take advantage of 6 kW\n          power on compact nests.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ELECTRICAL \/ FOOTPRINT --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eElectrical \u0026amp; footprint (high level)\u003c\/h4\u003e\n        \u003cp\u003e\n          Detailed electrical and footprint drawings are provided during specification. Generally, the system is\n          intended to fit into:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eStandard US 3-phase industrial power infrastructure\u003c\/li\u003e\n          \u003cli\u003eFabrication bays, compact production cells, or R\u0026amp;D labs\u003c\/li\u003e\n          \u003cli\u003eFloor layouts with typical rigging and access constraints\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Pre-installation planning covers access paths, clearances, and anchoring requirements to avoid surprises\n          during installation and commissioning.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n    \u003c\/div\u003e\n\n    \u003cp class=\"umpro-product__note\"\u003e\n      \u003cem\u003e\n        Cutting capacity, tolerances, and cycle times depend on material grade, assist gas, process parameters, part\n        geometry, and quality requirements. We recommend validating critical jobs and tolerances using sample parts and\n        approved parameter sets prior to full production release.\n      \u003c\/em\u003e\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- APPLICATIONS \/ USE CASES --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003e\n      The 6 kW, 4×4 ft Umprotech enclosed fiber laser is typically specified as a\n      \u003cstrong\u003ecompact production cell\u003c\/strong\u003e for small and mid-sized parts, or as a dedicated machine for a specific\n      product family or subassembly. It can operate as:\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eA standalone cutting station near forming and welding\u003c\/li\u003e\n      \u003cli\u003eA high-mix, small-part flex cell supporting larger full-sheet lasers\u003c\/li\u003e\n      \u003cli\u003eA dedicated cell for recurring OEM kits and assemblies\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cdiv class=\"umpro-product__usecases-grid\"\u003e\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003ePrecision brackets \u0026amp; structural components\u003c\/h4\u003e\n        \u003cp\u003e\n          High repeatability on brackets, gussets, connection plates, and structural details where hole positioning,\n          edge quality, and slot geometry are critical for fit-up and welding.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003ePanels \u0026amp; small enclosures\u003c\/h4\u003e\n        \u003cp\u003e\n          Flat patterns for small cabinets, covers, faceplates, and electrical panels. Accurate bend lines and\n          features support efficient press-brake forming and consistent assembly.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eMachine guards \u0026amp; safety hardware\u003c\/h4\u003e\n        \u003cp\u003e\n          Guards, screens, covers, and safety panels in steel or stainless, with consistent perforation patterns and\n          clean edges to meet safety and ergonomic requirements around machinery.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eSignage, branding \u0026amp; decorative plates\u003c\/h4\u003e\n        \u003cp\u003e\n          Letters, logos, and decorative geometries cut in stainless and aluminum, often finished with brushing,\n          powder coating, or architectural treatments for visual applications.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eHVAC \u0026amp; building components\u003c\/h4\u003e\n        \u003cp\u003e\n          Brackets, supports, mounting plates, and smaller panels for HVAC and building systems where repeatable\n          geometry and clean edges help reduce installation time and field rework.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003ePrototyping \u0026amp; engineering changes\u003c\/h4\u003e\n        \u003cp\u003e\n          Rapid prototypes and engineering change runs in steel, stainless, and aluminum, allowing design and\n          manufacturing teams to iterate geometry and fit-up without tying up larger full-sheet machines.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eContract manufacturing \u0026amp; OEM work\u003c\/h4\u003e\n        \u003cp\u003e\n          Recurring part families for OEMs and contract customers, with nests and parameters stored in the control for\n          quick recall, similar performance over time, and predictable cycle times.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eHigh-mix \/ low-volume specialty jobs\u003c\/h4\u003e\n        \u003cp\u003e\n          Ideal for shops that run many part numbers per shift, with frequent material and thickness changes. The\n          6 kW power envelope supports aggressive parameters while CypCut helps keep nesting and changeovers efficient.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cp\u003e\n      In many facilities, the 6 kW 4×4 cell becomes the\n      \u003cstrong\u003e“small-part workhorse”\u003c\/strong\u003e—absorbing high-mix, small-format jobs and freeing full-sheet machines to\n      focus on large nests and long-run production.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- CONFIGURATIONS \u0026 OPTIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 6 kW 4×4 ft enclosed fiber laser is provided as a\n      \u003cstrong\u003eready-to-run system\u003c\/strong\u003e. Core components—fiber source, auto-focus head, FSCUT control, full\n      enclosure, extraction, and chiller—are included as standard. Configuration choices let you align the cell with\n      your material mix, utilities, and internal standards.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFiber source options:\u003c\/strong\u003e Raycus or IPG at 6 kW. Choose based on your existing installed base,\n        service providers, and equipment preferences.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAssist gas configuration:\u003c\/strong\u003e support for nitrogen, oxygen, and dry air (configuration dependent).\n        We can recommend supply options (cylinders, bulk tanks, compressors) sized for your duty cycle and materials.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eControl stack:\u003c\/strong\u003e FSCUT controller with CypCut CAM\/nesting as standard—no separate basic CAM\n        purchase required for flat-sheet programming and simulation.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e included as standard, with parameter libraries by material and\n        thickness to reduce guesswork and simplify operator training.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFull-cover enclosure \u0026amp; extraction:\u003c\/strong\u003e integrated to simplify safety approvals, provide a\n        clean installation footprint, and contain fumes and process light.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIndustrial chiller:\u003c\/strong\u003e sized for 6 kW duty, supplied with the system for stable temperature\n        control of the laser source and optics.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eNetwork \u0026amp; integration:\u003c\/strong\u003e support for typical network connectivity and file transfer, enabling\n        integration into a CAD\/ERP-driven job-release workflow using shared folders or defined import paths.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegration-ready cell layout:\u003c\/strong\u003e compact footprint suitable for integration into forming,\n        welding, or assembly cells, with options to add simple material carts or fixtures in the future.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp\u003e\n      For more specialized needs—such as advanced automation, pallet systems, or unique fixturing—our team can discuss\n      tailored cell concepts built around the 6 kW 4×4 platform.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- IMPLEMENTATION \u0026 SUPPORT --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003e\n      We work with US job shops, OEMs, and integrators to ensure the 6 kW 4×4 enclosed fiber laser is\n      \u003cstrong\u003especified, installed, and supported\u003c\/strong\u003e around real production work—not just catalog numbers. The\n      focus is on uptime, safety, and predictable part quality.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePre-installation planning:\u003c\/strong\u003e review of power, floor space, exhaust routing, gas supply\n        (N\u003csub\u003e2\u003c\/sub\u003e\/O\u003csub\u003e2\u003c\/sub\u003e\/air), rigging routes, and access clearances. This significantly reduces risk and\n        surprise costs at installation.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePart \u0026amp; material review:\u003c\/strong\u003e you can share representative parts (DXF\/STEP\/PDF) and thickness\n        ranges. We confirm that a 6 kW 4×4 configuration is appropriate for your work and estimate representative\n        cycle times.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eCypCut workflow setup:\u003c\/strong\u003e assistance with nesting defaults, layer conventions, lead-in\/lead-out\n        schemes, micro-joint strategies, and parameter libraries aligned with your part families and standards.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOperator \u0026amp; maintenance training:\u003c\/strong\u003e onsite or remote training covering safe operation,\n        startup\/shutdown steps, routine checks, basic troubleshooting, and maintenance on optics, nozzles, and filters.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOngoing process support:\u003c\/strong\u003e help with new materials, cut-quality improvements, cycle-time\n        optimization, and integration questions as more work migrates onto the 6 kW cell.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp class=\"umpro-product__cta\"\u003e\n      \u003cstrong\u003eNext step:\u003c\/strong\u003e send us representative part files (DXF\/STEP\/PDF) and your material specifications.\n      We’ll confirm fit, outline expected cycle times, and recommend a 6 kW 4×4 configuration and assist-gas strategy\n      tailored to your shop and production goals.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- TECHNICAL FAQ --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--faq umpro-product-faq\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eTechnical FAQ – 6 kW · 4×4 ft enclosed fiber laser\u003c\/h3\u003e\n\n    \u003cdiv class=\"umpro-product-faq__grid\"\u003e\n\n      \u003c!-- FAQ 1 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Where does a 6 kW, 4×4 ft laser fit between 3 kW and 12 kW machines?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            A 6 kW, 4×4 ft cell sits in the middle of the power spectrum:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eNoticeably faster and more capable on thicker material than 2–3 kW systems\u003c\/li\u003e\n            \u003cli\u003eLower infrastructure, gas, and capital requirements than 10–12 kW full-sheet lasers\u003c\/li\u003e\n            \u003cli\u003eWell suited to shops that cut a mix of thin and mid-gauge material on smaller parts\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            For many US job shops and OEMs, 6 kW delivers a strong balance of throughput and operating cost in a\n            compact footprint.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 2 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What thickness range is realistic on a 6 kW small-format cell?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            6 kW provides a wide practical envelope for thin and mid-gauge materials and extends into many thicker\n            applications. The exact range depends on:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eMaterial grade (mild steel vs. high-strength vs. stainless vs. aluminum)\u003c\/li\u003e\n            \u003cli\u003eAssist gas strategy (N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, or air)\u003c\/li\u003e\n            \u003cli\u003eDesired edge quality, tolerances, and downstream operations\u003c\/li\u003e\n            \u003cli\u003eThroughput requirements (cycle time targets, part volumes)\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We recommend validating your key material\/thickness combinations with sample cuts and agreed parameter\n            windows before locking in final tolerances.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 3 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Why choose a 4×4 ft bed instead of a 4×8 or 5×10 platform?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            A 4×4 ft bed is ideal when:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eYour part mix is predominantly small and medium-sized components\u003c\/li\u003e\n            \u003cli\u003eFloor space near forming or welding is limited\u003c\/li\u003e\n            \u003cli\u003eYou already have full-sheet capacity elsewhere and need a compact flex cell\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            This format allows you to place the cell close to downstream operations and keep material travel short,\n            while still leveraging 6 kW of cutting power.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 4 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Is CypCut sufficient for programming, or do we need additional CAM software?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            For flat-sheet laser work, \u003cstrong\u003eCypCut is typically the primary programming and nesting environment\u003c\/strong\u003e.\n            It supports:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eImport of DXF\/DWG\/STEP from CAD tools\u003c\/li\u003e\n            \u003cli\u003eFull control over nesting, lead-ins, micro joints, and cutting sequence\u003c\/li\u003e\n            \u003cli\u003eSimulation and path visualization before cutting\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Many shops still integrate with upper-level systems (ERP, MES, quoting tools), but day-to-day cutting\n            programs are usually created and tuned directly in CypCut.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 5 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How challenging is it to train operators on a 6 kW machine with FSCUT + CypCut?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            For operators with some CNC, CAD, or manufacturing experience, the learning curve is manageable. Training\n            focuses on:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eSafe startup\/shutdown, interlocks, and daily safety checks\u003c\/li\u003e\n            \u003cli\u003eLoading nests, selecting materials, and managing parameter sets\u003c\/li\u003e\n            \u003cli\u003eResponding to alarms and basic troubleshooting steps\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Parameter libraries, graphical nests, and simulation tools help standardize results across multiple\n            operators and shifts, which is critical for high-mix environments.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 6 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What utilities and infrastructure are required before installation?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Before the machine ships, you receive a detailed pre-installation checklist. In general, you should plan for:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003e3-phase power with specified voltage and amperage capacity\u003c\/li\u003e\n            \u003cli\u003eAssist gas supply (N\u003csub\u003e2\u003c\/sub\u003e\/O\u003csub\u003e2\u003c\/sub\u003e\/air) sized for your duty cycle\u003c\/li\u003e\n            \u003cli\u003eExhaust or filtration connections for the integrated fume extraction\u003c\/li\u003e\n            \u003cli\u003eFloor space, rigging routes, and access heights appropriate for the 4×4 cell\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Closing these items ahead of time ensures that commissioning focuses on your parts and processes, rather\n            than last-minute facility changes.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 7 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What does routine maintenance look like on a 6 kW fiber laser cell?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Routine maintenance centers on protection of optics, assist gas cleanliness, and basic mechanical checks.\n            Typical tasks include:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eInspecting and cleaning\/replacing nozzles and protective windows\u003c\/li\u003e\n            \u003cli\u003eChecking assist gas filters, hoses, and pressure stability\u003c\/li\u003e\n            \u003cli\u003eMonitoring chiller fluid levels, temperature, and alarms\u003c\/li\u003e\n            \u003cli\u003eCleaning the cutting area and verifying motion system health\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We provide recommended intervals and procedures, and training covers how to perform these tasks safely and\n            effectively.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 8 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How does the fully enclosed Class 1 design influence safety and shop layout?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            The fully enclosed Class 1 design simplifies many aspects of laser safety:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eThe beam is contained during normal operation; cutting stops when doors are open\u003c\/li\u003e\n            \u003cli\u003eLaser safety zones can be smaller and more clearly defined\u003c\/li\u003e\n            \u003cli\u003eOperators typically work without broad-area laser eyewear around the cell\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            This often makes it easier to position the cell in busy shop areas next to other equipment, as safety\n            considerations are focused around the machine enclosure and loading\/unloading zones.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 9 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Can this 6 kW 4×4 cell integrate with our existing CAD\/ERP workflow?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Yes. Most integrations follow a straightforward pattern:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eDesigns and part data managed in your CAD and ERP\/MRP systems\u003c\/li\u003e\n            \u003cli\u003eFlat patterns exported from CAD as DXF\/DWG\/STEP files\u003c\/li\u003e\n            \u003cli\u003eFiles imported into CypCut for nesting, parameter assignment, and simulation\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We can help define file flows, folder structures, and naming conventions that tie engineering, scheduling,\n            and the laser cell together without adding unnecessary complexity.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 10 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How do we know if a 6 kW 4×4 configuration is the right fit for our shop?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            The best way is to evaluate your actual work. We typically:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eReview representative part drawings, thickness ranges, and yearly volumes\u003c\/li\u003e\n            \u003cli\u003eIdentify which parts fit well into a 4×4 small-format cell vs. full-sheet machines\u003c\/li\u003e\n            \u003cli\u003eEstimate cycle times, utilization, and throughput for a 6 kW platform\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            From there, we can compare this configuration with alternative power levels or table formats and recommend\n            a setup that aligns with your bottlenecks, space constraints, and growth plans.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n    \u003c\/div\u003e\n\n    \u003cp class=\"umpro-product-faq__closing\"\u003e\n      \u003cstrong\u003eStill have technical questions?\u003c\/strong\u003e Share your part drawings, material grades, and expected\n      quantities. We’ll provide a targeted assessment and configuration recommendation for your 6 kW 4×4 fiber laser cell.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e\n","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966013763950,"sku":"UFL-4x4-6KW-ENC","price":119900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-enclosed-fiber-laser-cutter-12kw-4x4ft-fscut-cypcut-1017946.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-12kw-4x4ft","title":"Umprotech Enclosed Fiber Laser Cutter 12kW 4x4ft | FSCUT CypCut","description":"\u003csection class=\"umpro-product umpro-product--flagship\"\u003e\n  \u003c!-- HERO \/ OVERVIEW --\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003cp class=\"umpro-product__eyebrow\"\u003eHigh-Power Enclosed Fiber Laser · Compact Small-Format Production Cell\u003c\/p\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003e\n      Umprotech Enclosed Fiber Laser Cutter – 12 kW · 4×4 ft · FSCUT \/ CypCut\n    \u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003e\n      A fully enclosed, Class 1 fiber laser cutting system delivering \u003cstrong\u003e12 kW of power\u003c\/strong\u003e in a compact\n      \u003cstrong\u003e4×4 ft (48×48\") format\u003c\/strong\u003e. Designed for US job shops, OEMs, and fabrication cells that need\n      \u003cstrong\u003ehigh throughput, safety, and consistent edge quality\u003c\/strong\u003e on a wide range of metals—without the\n      footprint of a full-sheet machine. Ideal as a high-power flex cell near forming, welding, or R\u0026amp;D.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__hero-grid\"\u003e\n      \u003cp class=\"umpro-product__hero-line\"\u003e\n        \u003cstrong\u003eLaser power:\u003c\/strong\u003e 12 kW fiber (Raycus \/ IPG) ·\n        \u003cstrong\u003eBed size:\u003c\/strong\u003e 4×4 ft (48×48\") ·\n        \u003cstrong\u003eController:\u003c\/strong\u003e FSCUT with CypCut CAM \/ nesting\n      \u003c\/p\u003e\n      \u003cp class=\"umpro-product__hero-line\"\u003e\n        \u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 ·\n        \u003cstrong\u003eHead:\u003c\/strong\u003e Auto-focus fiber cutting head ·\n        \u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e \/ O\u003csub\u003e2\u003c\/sub\u003e \/ dry air (configuration dependent)\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cul class=\"umpro-product__hero-points\"\u003e\n      \u003cli\u003e12 kW fiber laser power in a compact, fully enclosed 4×4 ft cell\u003c\/li\u003e\n      \u003cli\u003eProduction-grade FSCUT controller with CypCut nesting and simulation\u003c\/li\u003e\n      \u003cli\u003eFull-cover, Class 1 enclosure with integrated fume extraction and chiller\u003c\/li\u003e\n      \u003cli\u003eAuto-focus cutting head with height sensing for mixed thickness and warped sheets\u003c\/li\u003e\n      \u003cli\u003eBuilt for US shops needing high throughput in limited floor space\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/header\u003e\n\n  \u003c!-- POSITIONING \/ VALUE --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 12 kW, 4×4 ft enclosed fiber laser is positioned as a\n      \u003cstrong\u003eflagship small-format cutting cell\u003c\/strong\u003e for shops that want the advantages of high-power fiber cutting\n      without committing the floor space or capital of a large 4×8 or 5×10 platform.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003e12 kW power in a compact footprint:\u003c\/strong\u003e combines high-power cutting performance with a\n        space-efficient 4×4 ft table. Ideal for cells where floor space is at a premium—such as R\u0026amp;D labs, prototype\n        areas, and dedicated product cells near welding or assembly.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eHigh throughput on small to mid-sized parts:\u003c\/strong\u003e the high power density over a smaller working\n        envelope delivers very fast cycle times for brackets, panels, and precision components, especially when nests\n        are tuned for short part paths.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFull-cover, Class 1 safety enclosure:\u003c\/strong\u003e the light-tight design with interlocks supports typical\n        US laser safety expectations, simplifies risk assessments, and helps contain process light and fumes in busy\n        production areas.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto-focus head for high-mix work:\u003c\/strong\u003e the auto-focus cutting head tracks sheet warp and gauge\n        changes, maintaining consistent kerf width and edge quality when running mixed materials or frequent\n        changeovers.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFSCUT controller with CypCut:\u003c\/strong\u003e industrial-grade control hardware and CAM\/nesting software\n        enable fast DXF\/STEP import, intelligent nesting, simulation, and fine control of lead-ins, micro joints, and\n        process parameters.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegrated utilities:\u003c\/strong\u003e a dedicated industrial chiller and fume extraction system are included,\n        giving you a complete cutting cell when connected to power, assist gas, and exhaust infrastructure.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eRaycus or IPG laser source options:\u003c\/strong\u003e choose the 12 kW fiber source that best aligns with your\n        existing installed base, service preferences, or internal equipment standards.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegration-ready flex cell:\u003c\/strong\u003e easily placed near press brakes, welding fixtures, and assembly\n        stations, feeding downstream operations with short material moves and minimal WIP.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- PERFORMANCE OVERVIEW --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--performance\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003ePerformance: 12 kW power · 4×4 ft reach\u003c\/h3\u003e\n    \u003cp\u003e\n      With \u003cstrong\u003e12 kW of fiber power\u003c\/strong\u003e concentrated over a \u003cstrong\u003e4×4 ft working area\u003c\/strong\u003e, this cell\n      offers a unique blend of high power and small-format agility. It is particularly effective when shops need:\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eHigh-speed cutting on thin and mid-gauge sheet with very short cycle times\u003c\/li\u003e\n      \u003cli\u003eCapability to push into heavier sections for specialty or high-value parts\u003c\/li\u003e\n      \u003cli\u003eCompact, enclosed operation for R\u0026amp;D, pilot cells, or space-constrained production areas\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cdiv class=\"umpro-product__metrics-grid\"\u003e\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eTypical application focus*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eThin and mid-gauge steel brackets, flanges, and enclosures at very high speeds\u003c\/li\u003e\n          \u003cli\u003eHigher-thickness jobs where extra power shortens pierce and cut times\u003c\/li\u003e\n          \u003cli\u003eHigh-mix part families where quality and throughput must both be maintained\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *Exact thickness and performance windows depend on material grade, assist gas, and edge-quality requirements.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eThroughput characteristics\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eShort part paths and nests that fully leverage 12 kW in a small envelope\u003c\/li\u003e\n          \u003cli\u003eReduced pierce times and rapid acceleration\/deceleration\u003c\/li\u003e\n          \u003cli\u003eHigh part counts per hour on smaller components and kit-based nests\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          Effective as a dedicated cell for high-value or high-mix small parts where laser time is a bottleneck.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eQuality \u0026amp; consistency*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eEdge quality suitable for many welding, painting, and coating applications\u003c\/li\u003e\n          \u003cli\u003eRepeatable geometry on recurring product families and fixtures\u003c\/li\u003e\n          \u003cli\u003eStable performance on long shifts with proper parameter management\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *Final tolerances and finish expectations should be confirmed using sample cuts on your materials.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- DETAILED TECHNICAL SPECIFICATIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 12 kW 4×4 enclosed fiber laser is delivered as a\n      \u003cstrong\u003ecomplete cutting cell\u003c\/strong\u003e. Laser, motion platform, auto-focus head, control stack, full enclosure,\n      extraction, and chiller are supplied as an integrated package to minimize onsite integration work.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n\n      \u003c!-- LASER SOURCE --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eLaser power \u0026amp; source\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 12 kW fiber (Raycus or IPG options)\u003c\/p\u003e\n        \u003cp\u003e\n          A 12 kW source provides:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eHigh-speed cutting of thin and mid-gauge materials\u003c\/li\u003e\n          \u003cli\u003eIncreased capability for thicker sections and demanding alloys\u003c\/li\u003e\n          \u003cli\u003eShorter pierce times and more robust cutting conditions\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Raycus and IPG are established industrial laser suppliers, offering stable power delivery and proven\n          industrial performance.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- WORKING ENVELOPE --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eWorking envelope\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eBed size \/ stroke:\u003c\/strong\u003e 4×4 ft (48×48\") nominal working area\u003c\/p\u003e\n        \u003cp\u003e\n          The compact table is optimized for:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eSmall-format parts and short-run production\u003c\/li\u003e\n          \u003cli\u003ePrototype work and engineering changes near R\u0026amp;D or design teams\u003c\/li\u003e\n          \u003cli\u003eDedicated product cells where parts flow directly into forming or welding\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          The small footprint allows placement in areas where a full 4×8 or 5×10 machine is not practical.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CONTROL \/ CAM --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eController \u0026amp; CAM \/ nesting\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eControl:\u003c\/strong\u003e FSCUT industrial motion and laser control\u003c\/p\u003e\n        \u003cp\u003e\u003cstrong\u003eSoftware:\u003c\/strong\u003e CypCut CAM \/ nesting\u003c\/p\u003e\n        \u003cp\u003e\n          The FSCUT + CypCut stack delivers:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eDXF \/ DWG \/ STEP import from your CAD system\u003c\/li\u003e\n          \u003cli\u003eAutomatic and interactive nesting for the 4×4 ft format\u003c\/li\u003e\n          \u003cli\u003eLead-in\/lead-out control, micro joints, tabbing, and corner smoothing\u003c\/li\u003e\n          \u003cli\u003eCommon-line cutting and bridging to reduce pierces and cycle time\u003c\/li\u003e\n          \u003cli\u003ePath simulation and sequence control before starting the job\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          This control stack is widely used in industrial laser applications, making it easier to hire or train\n          operators familiar with the interface.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CUTTING HEAD --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eCutting head \u0026amp; auto-focus\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Auto-focus fiber cutting head with capacitive height sensing\u003c\/p\u003e\n        \u003cp\u003e\n          The auto-focus system:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eAutomatically adjusts focus according to material thickness\u003c\/li\u003e\n          \u003cli\u003eCompensates for sheet warp and camber across the 4×4 ft bed\u003c\/li\u003e\n          \u003cli\u003eHelps maintain a consistent kerf width and pierce quality\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Parameter presets link focus height, assist gas, and cutting speed to material and thickness combinations,\n          supporting repeatable results across shifts and operators.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ENCLOSURE \/ SAFETY --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eEnclosure \u0026amp; safety\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 light-tight housing with interlocks\u003c\/p\u003e\n        \u003cp\u003e\n          The enclosure provides:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eInterlocked doors that prevent cutting when open\u003c\/li\u003e\n          \u003cli\u003eViewing windows for process monitoring without direct exposure to laser radiation\u003c\/li\u003e\n          \u003cli\u003eIsolated cutting area, containing sparks and process light\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          This design simplifies compliance with typical US laser safety expectations and allows placement in busier\n          production areas alongside other equipment.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- UTILITIES \/ CHILLER \/ EXTRACTION --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eUtilities, chiller \u0026amp; fume extraction\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e industrial chiller + integrated fume extraction\u003c\/p\u003e\n        \u003cp\u003e\n          The chiller maintains stable cooling for:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eLaser source cooling circuit\u003c\/li\u003e\n          \u003cli\u003eOptics and cutting head cooling\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          The fume extraction system captures process smoke near the cutting zone and routes it to your exhaust or\n          filtration infrastructure, supporting cleaner shop air and helping to protect optics and mechanics.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ASSIST GASES --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eAssist gases \u0026amp; strategy\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eAssist gases:\u003c\/strong\u003e Nitrogen (N\u003csub\u003e2\u003c\/sub\u003e), Oxygen (O\u003csub\u003e2\u003c\/sub\u003e), and dry air (configuration dependent)\u003c\/p\u003e\n        \u003cp\u003e\n          Typical usage includes:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003e\n\u003cstrong\u003eOxygen:\u003c\/strong\u003e high-speed cutting of carbon steel with oxidized edge\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003eNitrogen:\u003c\/strong\u003e bright, oxide-free edges for stainless and aluminum\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003eDry air:\u003c\/strong\u003e cost-effective cutting when some oxide color is acceptable\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          We can recommend gas storage, regulation, and distribution concepts based on your duty cycle and material mix.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- MOTION SYSTEM --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eMotion system \u0026amp; structure\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eMotion:\u003c\/strong\u003e servo-driven gantry with precision linear guidance\u003c\/p\u003e\n        \u003cp\u003e\n          The motion platform is tuned for:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eHigh-speed interpolation over short part paths\u003c\/li\u003e\n          \u003cli\u003eAccurate hole and slot geometry on small parts\u003c\/li\u003e\n          \u003cli\u003eRepeatable positioning over the full 4×4 ft area\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Mechanical stiffness and servo control support continuous operation in production environments.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ELECTRICAL \/ FOOTPRINT --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eElectrical \u0026amp; footprint (high level)\u003c\/h4\u003e\n        \u003cp\u003e\n          Detailed electrical and footprint drawings are provided during the specification phase. In general, the\n          machine is designed to fit into:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eTypical US industrial 3-phase power environments\u003c\/li\u003e\n          \u003cli\u003eCompact fabrication cells, R\u0026amp;D labs, and pilot production areas\u003c\/li\u003e\n          \u003cli\u003eFloor layouts with standard rigging and access constraints\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Pre-install planning covers access paths, clearances, and anchoring needs to minimize surprises at installation.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n    \u003c\/div\u003e\n\n    \u003cp class=\"umpro-product__note\"\u003e\n      \u003cem\u003e\n        Actual cutting capacity, throughput, and tolerances depend on material grade, assist gas, nesting strategy,\n        process parameters, and edge-quality requirements. We recommend validating critical jobs and tolerances through\n        sample parts and agreed parameter sets before full production release.\n      \u003c\/em\u003e\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- APPLICATIONS \/ USE CASES --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003e\n      The 12 kW, 4×4 ft Umprotech enclosed fiber laser is often specified as a\n      \u003cstrong\u003ecompact high-power cell\u003c\/strong\u003e for small and mid-sized parts, or as a dedicated machine for a specific\n      product family. It can function as:\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eA high-power flex cell near press brakes and welding stations\u003c\/li\u003e\n      \u003cli\u003eA prototyping and pilot-production system near engineering teams\u003c\/li\u003e\n      \u003cli\u003eA dedicated product cell feeding one or more assembly lines\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cdiv class=\"umpro-product__usecases-grid\"\u003e\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003ePrecision brackets \u0026amp; structural components\u003c\/h4\u003e\n        \u003cp\u003e\n          High repeatability for brackets, gussets, flanges, and connection plates used in machinery, equipment, and\n          structural assemblies—where hole patterns and fit-up must be consistent over long product runs.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003ePanels \u0026amp; small enclosures\u003c\/h4\u003e\n        \u003cp\u003e\n          Flat patterns for small cabinets, junction boxes, covers, and machine panels. Accurate features support\n          efficient forming and reliable assembly in downstream processes.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eMachine guards \u0026amp; safety components\u003c\/h4\u003e\n        \u003cp\u003e\n          Guards, covers, screens, and safety shields where consistent hole geometry, smooth edges, and repeatable\n          fit-up are critical for both safety and ergonomics.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eSignage, plates \u0026amp; branding elements\u003c\/h4\u003e\n        \u003cp\u003e\n          Logos, lettering, and decorative geometry in steel, stainless, and aluminum, with edges suitable for brushing,\n          powder coating, or architectural finishes.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eHVAC \u0026amp; building hardware\u003c\/h4\u003e\n        \u003cp\u003e\n          Small panels, brackets, supports, and mounting hardware for HVAC and building systems, where dimensional\n          consistency reduces installation time and field rework.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003ePrototyping \u0026amp; engineering changes\u003c\/h4\u003e\n        \u003cp\u003e\n          Rapid-turn prototypes and engineering changes in stainless, carbon steel, and aluminum. Engineering teams can\n          iterate on geometry and fit-up without waiting on large-format machines or external suppliers.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eContract manufacturing \u0026amp; OEM part flow\u003c\/h4\u003e\n        \u003cp\u003e\n          Dedicated to recurring part families for OEMs or contract manufacturing work, with programs, nests, and\n          parameter sets stored in the control for quick recall and consistent performance.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eHigh-mix \/ low-volume specialty work\u003c\/h4\u003e\n        \u003cp\u003e\n          Ideal for specialty or high-value parts where a compact high-power cell delivers fast turnaround, while\n          larger full-sheet machines are used for bulk flat-sheet production.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cp\u003e\n      In many facilities, the 12 kW 4×4 laser becomes the\n      \u003cstrong\u003e“high-power flex cell”\u003c\/strong\u003e—absorbing rush jobs, specialty parts, and engineering changes, while\n      larger machines focus on full-sheet, long-run production.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- CONFIGURATIONS \u0026 OPTIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 12 kW 4×4 ft enclosed fiber laser is supplied as a\n      \u003cstrong\u003eready-to-run system\u003c\/strong\u003e. Core elements—fiber source, auto-focus head, FSCUT control, full enclosure,\n      extraction, and industrial chiller—are standard. Configuration choices allow you to align the cell with your\n      material strategy, standards, and plant infrastructure.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFiber source options:\u003c\/strong\u003e 12 kW Raycus or 12 kW IPG. Choose based on your installed base,\n        preferred service network, or internal engineering standards.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAssist gas configuration:\u003c\/strong\u003e support for nitrogen, oxygen, and dry air (configuration dependent).\n        We can review your thickness range, duty cycle, and edge-quality requirements to recommend an assist gas\n        strategy and storage concept.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eControl stack:\u003c\/strong\u003e FSCUT controller with CypCut CAM \/ nesting as standard—no separate basic CAM\n        license required for 2D flat-sheet programming, nesting, and simulation.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e supplied as standard, with parameter libraries organized by material\n        and thickness to reduce operator dependency and simplify training.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFull-cover enclosure \u0026amp; extraction:\u003c\/strong\u003e included to simplify safety approvals and minimize\n        design effort around fume capture and shielding.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIndustrial chiller:\u003c\/strong\u003e sized for 12 kW duty, included with the system to provide stable thermal\n        conditions for both laser source and optics.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eNetwork \u0026amp; workflow integration:\u003c\/strong\u003e support for common network connections and file transfer,\n        enabling integration into your CAD\/ERP-driven job-release process with shared folders or defined import paths.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eCompact cell configuration:\u003c\/strong\u003e the 4×4 format is well suited to single-variant cells or specialty\n        lines where the laser is located very close to forming, welding, or assembly.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- IMPLEMENTATION \u0026 SUPPORT --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003e\n      We understand the practical realities of integrating high-power laser systems into US job shops, OEM lines, and\n      R\u0026amp;D environments. Our focus is on \u003cstrong\u003euptime, safety, and predictable quality\u003c\/strong\u003e rather than just\n      nameplate power.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePre-installation planning:\u003c\/strong\u003e review of power requirements, floor space, exhaust routing, gas\n        supply (N\u003csub\u003e2\u003c\/sub\u003e\/O\u003csub\u003e2\u003c\/sub\u003e\/air), rigging, and access paths to minimize surprises at installation.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePart \u0026amp; material assessment:\u003c\/strong\u003e review of representative parts (DXF\/STEP\/PDF) and thickness\n        ranges to confirm that a 12 kW 4×4 configuration is appropriate for your application and throughput targets.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eCypCut workflow setup:\u003c\/strong\u003e assistance with nesting strategies, layer conventions, micro joints,\n        lead-in\/out defaults, and parameter libraries tailored to your part families.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOperator \u0026amp; maintenance training:\u003c\/strong\u003e onsite or remote training covering safe operation, daily\n        checks, parameter selection, basic troubleshooting, and maintenance routines for optics, nozzles, and filters.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOngoing process support:\u003c\/strong\u003e help with new materials, cut-quality tuning, cycle-time optimization,\n        and integration questions as more work moves onto the 12 kW cell.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp class=\"umpro-product__cta\"\u003e\n      \u003cstrong\u003eNext step:\u003c\/strong\u003e send us representative part files (DXF\/STEP\/PDF) and your material specifications.\n      We’ll confirm fit, estimate cycle times, and recommend a 12 kW 4×4 configuration and assist-gas strategy aligned\n      with your workflows and production goals.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- TECHNICAL FAQ --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--faq umpro-product-faq\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eTechnical FAQ – 12 kW · 4×4 ft enclosed fiber laser\u003c\/h3\u003e\n\n    \u003cdiv class=\"umpro-product-faq__grid\"\u003e\n\n      \u003c!-- FAQ 1 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Why put a 12 kW laser on a 4×4 ft table instead of a full-sheet platform?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            A 4×4 ft table with 12 kW power is ideal when you:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eFocus on smaller parts, kits, and assemblies rather than full-sheet nests\u003c\/li\u003e\n            \u003cli\u003eHave limited floor space near forming or welding cells\u003c\/li\u003e\n            \u003cli\u003eNeed a high-power “flex cell” for specialty parts and rush jobs\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            You gain the cutting performance of a high-power source while keeping footprint, rigging, and integration\n            requirements closer to those of a small-format machine.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 2 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What thickness range is realistic on a 12 kW small-format cell?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            12 kW provides ample headroom for thin and mid-gauge materials and extends well into thicker sections.\n            However, practical limits depend on:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eMaterial grade and supplier consistency\u003c\/li\u003e\n            \u003cli\u003eAssist gas choice and delivery (N\u003csub\u003e2\u003c\/sub\u003e vs O\u003csub\u003e2\u003c\/sub\u003e vs dry air)\u003c\/li\u003e\n            \u003cli\u003eDesired edge quality and downstream weld \/ coating requirements\u003c\/li\u003e\n            \u003cli\u003eRequested cycle times and part volumes\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We recommend validating your key material and thickness combinations with sample cuts and agreed parameter\n            windows before committing final tolerances.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 3 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How does this 12 kW 4×4 system compare to a 3 kW or 6 kW machine for small parts?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            For small parts, 12 kW can significantly reduce cycle times through:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eHigher cutting speeds on thin and mid-gauge material\u003c\/li\u003e\n            \u003cli\u003eShorter pierce times and faster acceleration\/deceleration\u003c\/li\u003e\n            \u003cli\u003eMore robust process windows on challenging geometries or thicker sections\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Whether this is justified versus 3–6 kW depends on your mix of thicknesses, volume per part number, and\n            bottlenecks in your current workflow. We can model cycle times using your nesting examples to help decide.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 4 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Is CypCut enough for programming, or do we need additional CAM software?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            For flat-sheet laser work, \u003cstrong\u003eCypCut is usually the main programming and nesting environment\u003c\/strong\u003e.\n            It handles:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eImport of DXF\/DWG\/STEP from CAD\u003c\/li\u003e\n            \u003cli\u003eNesting, lead-in\/lead-out control, micro joints, and sequence management\u003c\/li\u003e\n            \u003cli\u003eSimulation and verification before cutting\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Many shops use higher-level systems for quoting or ERP integration, but day-to-day cutting programs are\n            typically built and refined in CypCut on the FSCUT controller.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 5 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How difficult is it to train operators on FSCUT + CypCut for a high-power machine?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Training focuses on \u003cstrong\u003esafe operation first\u003c\/strong\u003e, then on efficient use of the control:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eSafe startup \/ shutdown, interlocks, and daily safety checks\u003c\/li\u003e\n            \u003cli\u003eLoading nests, adjusting sequence, and managing parameter sets\u003c\/li\u003e\n            \u003cli\u003eBasic troubleshooting of alarms and process deviations\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            For operators with CNC or CAD\/CAM experience, the learning curve is manageable. Parameter libraries and\n            graphical nesting views help standardize performance between shifts.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 6 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What utilities and infrastructure do we need in place before installation?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Prior to shipment, you receive a detailed pre-installation checklist. In general, you should plan for:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eAppropriate 3-phase power with specified voltage and amperage\u003c\/li\u003e\n            \u003cli\u003eAssist gas storage and regulation sized for your duty cycle\u003c\/li\u003e\n            \u003cli\u003eExhaust or filtration connection for the fume extraction system\u003c\/li\u003e\n            \u003cli\u003eFloor space, rigging paths, and access clearances for the 4×4 cell\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Reviewing and closing these items early helps ensure installation and commissioning focus on bringing your\n            parts into production, not last-minute infrastructure changes.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 7 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What maintenance is typical for a 12 kW fiber laser in daily production?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Routine maintenance primarily involves optics, gas systems, and mechanical inspections. Typical tasks include:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eInspecting and cleaning nozzles and protective windows at defined intervals\u003c\/li\u003e\n            \u003cli\u003eMonitoring assist gas filters, lines, and pressure stability\u003c\/li\u003e\n            \u003cli\u003eChecking chiller levels, alarms, and temperature setpoints\u003c\/li\u003e\n            \u003cli\u003eBasic mechanical inspections and cleaning of the cutting area\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We provide maintenance schedules and checklists, and training includes how to carry out these tasks safely\n            for a high-power system.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 8 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How does the fully enclosed Class 1 design impact our safety program and layout?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            A fully enclosed Class 1 design simplifies many aspects of laser safety:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eThe cutting process is contained; interlocks prevent cutting with doors open\u003c\/li\u003e\n            \u003cli\u003eOperators normally do not need broad-area laser PPE around the cell\u003c\/li\u003e\n            \u003cli\u003eRisk assessments focus on defined access points, rather than open-beam exposure\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            This often makes it easier to locate the cell near other equipment, as the primary hazards are localized to\n            the enclosed machine and its loading\/unloading zones.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 9 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Can we integrate the 12 kW 4×4 cell into an existing CAD\/ERP-driven workflow?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Yes. Typical integration patterns include:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eCreating models and drawings in your existing CAD system\u003c\/li\u003e\n            \u003cli\u003eExporting flat patterns as DXF\/DWG\/STEP tied to part numbers in ERP\/MRP\u003c\/li\u003e\n            \u003cli\u003eImporting those files into CypCut for nesting, parameter assignment, and simulation\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We can help you define folder structures, naming conventions, and job-release steps to align engineering,\n            planning, and the laser cell.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 10 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How do we decide if a 12 kW 4×4 configuration is the right fit for our shop?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            The best way is to look at real jobs. We typically:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eReview representative parts (DXF\/STEP\/PDF), thickness ranges, and volumes\u003c\/li\u003e\n            \u003cli\u003eIdentify which parts are better suited to a compact high-power cell vs. full-sheet machines\u003c\/li\u003e\n            \u003cli\u003eEstimate cycle times and utilization for a 12 kW 4×4 cell using your nesting examples\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            From there, we can compare this configuration to alternative power levels or table sizes and recommend a\n            setup that aligns with your bottlenecks, space constraints, and growth plans.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n    \u003c\/div\u003e\n\n    \u003cp class=\"umpro-product-faq__closing\"\u003e\n      \u003cstrong\u003eStill have technical questions?\u003c\/strong\u003e Share your part drawings, material grades, and expected\n      quantities. We’ll provide a targeted assessment and configuration recommendation for your 12 kW 4×4 fiber laser cell.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e\n","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966013796718,"sku":"UFL-4x4-12KW-ENC","price":189900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-enclosed-fiber-laser-cutter-12kw-4x4ft-fscut-cypcut-1017946.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-2kw-4x8ft","title":"Umprotech Enclosed Fiber Laser Cutter 2kW 4x8ft FSCUT","description":"\u003csection class=\"umpro-product\"\u003e\u003cheader class=\"umpro-product__hero\"\u003e\n\u003ch2 class=\"umpro-product__title\"\u003eUmprotech Enclosed Fiber Laser Cutter – 2 kW, 4×8 ft, FSCUT\u003c\/h2\u003e\n\u003cp class=\"umpro-product__subtitle\"\u003eA fully enclosed 2 kW fiber laser system built for US job shops, OEMs, and fabrication cells that live on \u003cstrong\u003e4×8 ft sheet work\u003c\/strong\u003e. This model combines a 2 kW Raycus or IPG source, FSCUT controller, and CypCut CAM in a Class 1 enclosure with integrated fume extraction and chiller—delivering clean edges, stable performance, and predictable cycle times for high-mix and repeat production.\u003c\/p\u003e\n\u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 2 kW · \u003cstrong\u003eBed size:\u003c\/strong\u003e 4×8 ft (48×96\") · \u003cstrong\u003eController:\u003c\/strong\u003e FSCUT \/ CypCut · \u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1\u003c\/p\u003e\n\u003c\/header\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n\u003cp\u003eThis 2 kW, 4×8 ft enclosed fiber laser is designed as a \u003cstrong\u003eproduction-ready cutting cell\u003c\/strong\u003e for shops that need the flexibility of job-shop work with the repeatability of OEM production. It drops into existing fab lines with standard 4×8 sheet flow and provides Class 1 safety for mixed-use facilities.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 kW Raycus or IPG fiber source:\u003c\/strong\u003e stable, low-maintenance power platform for typical job-shop thicknesses in carbon steel, stainless, aluminum, and brass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard 4×8 ft (48×96\") bed:\u003c\/strong\u003e processes full sheets without trimming or re-squaring, maximizing nesting efficiency and reducing material handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully enclosed, Class 1 safety:\u003c\/strong\u003e light-tight, interlocked enclosure lets you run the machine in shared shop spaces while protecting operators and bystanders from laser radiation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFSCUT controller + CypCut CAM:\u003c\/strong\u003e widely used industrial control stack with DXF import, automatic nesting, micro-joints, and cut-path optimization to keep high-mix work flowing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e motorized focus adjustment tracks material thickness and warp, maintaining kerf width, edge quality, and piercing reliability across the sheet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssist gas flexibility:\u003c\/strong\u003e supports nitrogen, oxygen, and shop air so you can balance edge appearance, cutting speed, and cost per part for each job.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated fume extraction and industrial chiller:\u003c\/strong\u003e included as standard, reducing integration work and helping maintain consistent beam quality and machine uptime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized for high-mix production:\u003c\/strong\u003e job storage, parameter libraries, and intuitive CypCut tools support frequent part changes, prototypes, and repeat orders.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 2 kW 4×8 ft enclosed fiber laser is supplied as a \u003cstrong\u003ecomplete cutting package\u003c\/strong\u003e: laser source, motion system, controller, chiller, and extraction are matched to deliver predictable performance in production conditions when installed and maintained correctly.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__specs-grid\"\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 2 kW fiber (Raycus or IPG)\u003c\/p\u003e\n\u003cp\u003eIndustrial-grade fiber source with high wall-plug efficiency, long service life, and consistent beam quality. 2 kW is a strong fit for typical sheet gauges in job-shop and OEM environments without excessive operating cost.\u003c\/p\u003e\n\u003c\/div\u003e\n```\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eWorking area:\u003c\/strong\u003e 4×8 ft (48×96\" \/ ~1219×2438 mm)\u003c\/p\u003e\n\u003cp\u003eHandles full-size 4×8 sheets directly, enabling efficient nesting, minimal scrap, and straightforward material handling with standard carts and racks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eController \u0026amp; CAM:\u003c\/strong\u003e FSCUT with CypCut\u003c\/p\u003e\n\u003cp\u003eSupports DXF\/DWG import, automatic nesting, lead-in\/lead-out control, micro-joints, corner smoothing, pierce optimization, and graphical simulation so programmers can verify paths before cutting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Auto-focus fiber head\u003c\/p\u003e\n\u003cp\u003eMotorized focus and capacitive height sensing maintain the correct standoff and focus position over warped or imperfect sheets, improving edge quality and cut stability across the full 4×8 bed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1\u003c\/p\u003e\n\u003cp\u003eLight-tight housing with interlocked access doors and appropriately filtered viewing windows. Designed to contain reflections, fumes, and noise, and to simplify safety compliance in mixed-use facilities or schools.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eFume extraction:\u003c\/strong\u003e Integrated system\u003c\/p\u003e\n\u003cp\u003eMulti-point extraction under the cutting zone pulls smoke and particulate at the source, improving lens life, cut quality, and overall shop cleanliness when properly ducted and maintained.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eCooling system:\u003c\/strong\u003e Industrial chiller\u003c\/p\u003e\n\u003cp\u003eDedicated chiller maintains stable temperatures for the laser source and cutting head, which is critical for beam stability, repeatable focus behavior, and long component life during multi-shift operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, dry air\u003c\/p\u003e\n\u003cp\u003eConfigure nitrogen for bright, oxide-free edges (stainless\/aluminum), oxygen for fast carbon steel cutting, and shop air for cost-effective cutting of non-cosmetic components where slight oxidation is acceptable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eMotion system:\u003c\/strong\u003e Servo-driven gantry\u003c\/p\u003e\n\u003cp\u003ePrecision servo motors and rigid gantry construction (rack-and-pinion or linear guides, depending on configuration) maintain path accuracy, sharp internal corners, and repeatable contouring across the sheet.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eTypical cutting range (reference only):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRepresentative ranges for 2 kW (exact limits depend on material, gas, and quality requirements): \u003cbr\u003e· Carbon steel – thin sheet up to mid-gauge plate in O\u003csub\u003e2\u003c\/sub\u003e or N\u003csub\u003e2\u003c\/sub\u003e \u003cbr\u003e· Stainless steel – typical enclosure and bracket gauges in N\u003csub\u003e2\u003c\/sub\u003e \u003cbr\u003e· Aluminum – common panel and cover thicknesses in N\u003csub\u003e2\u003c\/sub\u003e or air \u003cbr\u003e· Brass – standard signage and hardware thicknesses\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"umpro-product__note\"\u003e\u003cem\u003e Important: final cutting capacity and quality are highly dependent on material grade, surface condition, gas purity\/pressure, nozzle selection, and cut parameters. Always validate critical jobs with sample cuts. \u003c\/em\u003e\u003c\/p\u003e\n```\u003c\/section\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n\u003cp\u003eWith its standard 4×8 ft format and 2 kW power level, this enclosed fiber laser becomes a \u003cstrong\u003ecore cutting asset\u003c\/strong\u003e for shops moving from plasma\/shear work into laser, or adding a second machine dedicated to high-mix sheets and repeat OEM parts.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanels \u0026amp; enclosures:\u003c\/strong\u003e electrical and control cabinets, covers, access panels, and skins for industrial equipment and automation systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrackets \u0026amp; structural details:\u003c\/strong\u003e gussets, mounting plates, connection brackets, light structural members, and welded sub-components for machinery or construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHVAC \u0026amp; duct components:\u003c\/strong\u003e flat patterns for ductwork, plenums, flanges, and support brackets with clean edges ready for forming and assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine guards \u0026amp; safety panels:\u003c\/strong\u003e perforated plates, covers, and guards in steel or stainless, prepared for bending and installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignage \u0026amp; OEM branding:\u003c\/strong\u003e letters, logos, perforated panels, and decorative covers in stainless, aluminum, or brass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-mix\/low-volume production:\u003c\/strong\u003e job-shop work where DXF files are constantly changing, and the need is to go from quote to finished parts quickly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated fab cells:\u003c\/strong\u003e upstream cutting for press brakes, hardware insertion, welding, and final assembly in lean manufacturing lines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 2 kW 4×8 ft enclosed fiber laser is delivered as a \u003cstrong\u003eproduction-ready package\u003c\/strong\u003e, with configuration options that let you align brand preferences, performance, and operating cost with your shop’s strategy.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser source:\u003c\/strong\u003e 2 kW Raycus or IPG fiber source, selected for your preferred support model and budget.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl \u0026amp; software:\u003c\/strong\u003e FSCUT controller with CypCut CAM as standard, including nesting, micro-joints, fly-cutting (where applicable), and parameter libraries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssist gas configuration:\u003c\/strong\u003e plumbed for nitrogen, oxygen, and\/or dry shop air depending on your mix of cosmetic vs. non-cosmetic work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting head \u0026amp; optics:\u003c\/strong\u003e auto-focus head standard, with nozzle and protective window kits selected for your typical materials and thickness ranges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure package:\u003c\/strong\u003e full-cover Class 1 housing, integrated fume extraction, and industrial chiller included; consult for ducting and exhaust layout recommendations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegration options:\u003c\/strong\u003e recommendations for infeed\/outfeed racks, carts, and interface points when tying into press brakes, welding cells, or automation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--process\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eProcess notes \u0026amp; cutting best practices\u003c\/h3\u003e\n\u003cp\u003eTo get the most out of a 2 kW, 4×8 ft fiber laser, many US shops standardize a small set of \u003cstrong\u003einternal cutting rules\u003c\/strong\u003e and parameter templates:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair gas and nozzle with the job:\u003c\/strong\u003e nitrogen + small nozzle for stainless\/aluminum with cosmetic edges; oxygen + appropriate nozzle for carbon steel production where oxide layer is acceptable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse dedicated parameter libraries:\u003c\/strong\u003e create and lock parameter sets per material and thickness (e.g., “A36-11ga-O2-fast”, “304-14ga-N2-finish”) and store them in CypCut to ensure repeatability between shifts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTune pierce strategies for thicker materials:\u003c\/strong\u003e separate pierce and cut settings with controlled pierce power, time, and height to increase reliability and protect optics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply micro-joints where needed:\u003c\/strong\u003e use micro-tabs and smart lead-ins to prevent part tip-up and minimize scarring on visible edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep optics and table clean:\u003c\/strong\u003e regularly inspect nozzles, protective windows, and the cutting bed. Build simple maintenance checklists into daily and weekly routines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValidate new materials:\u003c\/strong\u003e for any new supplier or material grade, run short test programs to confirm edge quality and adjust speed, power, and gas before committing to long runs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__note\"\u003e\u003cem\u003e Actual cut speed, edge quality, and maximum thickness capability will vary by material grade, batch, and setup. We recommend keeping “golden sample” parts and parameter sets as internal references. \u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n\u003cp\u003eWe work closely with US job shops, OEMs, and contract manufacturers to make sure your 2 kW enclosed fiber laser is \u003cstrong\u003eproperly specified, installed, and integrated\u003c\/strong\u003e into your real production flow, not just dropped on the floor.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-installation review:\u003c\/strong\u003e power (voltage, amperage), floor loading, access for installation, exhaust routing, and gas supply are reviewed in advance to avoid surprises.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication evaluation:\u003c\/strong\u003e send sample parts and thickness ranges; we confirm suitability, discuss assist gas choices, and recommend nozzle\/parameter strategies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgramming \u0026amp; nesting support:\u003c\/strong\u003e initial help with CypCut nesting, part libraries, micro-joint strategies, and skeleton removal approaches tailored to your shop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator \u0026amp; maintenance training:\u003c\/strong\u003e onsite or remote sessions covering safety, daily checks, parameter selection, basic troubleshooting, and best practices for long-term uptime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOngoing assistance:\u003c\/strong\u003e support for process optimization, new material qualification, and integration questions as your production mix evolves.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNext step:\u003c\/strong\u003e send a sample set of parts (DXF\/STEP\/PDF) and material specs, and we’ll help confirm fit, estimate cycle times, and recommend the right configuration of the 2 kW, 4×8 ft enclosed fiber laser for your shop.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966013829486,"sku":"UFL-4x8-2KW-ENC","price":89900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-12kw-enclosed-fiber-laser-cutter-6x20ft-fscut-5723155.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-3kw-4x8ft","title":"Umprotech Enclosed Fiber Laser Cutter 3kW 4x8ft FSCUT","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eUmprotech Enclosed Fiber Laser Cutter – 3 kW · 4×8 ft · FSCUT\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003e\n      A fully enclosed 3 kW fiber laser cutting system engineered for US job shops, OEMs, and fabrication cells that\n      need more speed and thickness capacity than entry-level lasers, without moving up to a large-format or high-kW\n      platform. The 3 kW source in a standard 4×8 ft (48×96\") envelope delivers clean, repeatable cuts on steel,\n      stainless, aluminum, and more—backed by industrial FSCUT control and CypCut CAM.\n    \u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\n      \u003cstrong\u003eLaser power:\u003c\/strong\u003e 3 kW ·\n      \u003cstrong\u003eBed size:\u003c\/strong\u003e 4×8 ft (48×96\") ·\n      \u003cstrong\u003eController:\u003c\/strong\u003e FSCUT with CypCut ·\n      \u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1\n    \u003c\/p\u003e\n  \u003c\/header\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cp\u003e\n      The 3 kW, 4×8 ft Umprotech enclosed fiber laser is designed as a \u003cstrong\u003eproduction-ready cutting cell\u003c\/strong\u003e\n      for shops that run thicker gauges, want faster cycle times, or are replacing plasma\/shear work with laser\n      precision. It combines standard North American sheet handling with the safety and cleanliness of a fully\n      enclosed Class 1 system.\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003e3 kW fiber laser power:\u003c\/strong\u003e adds cutting headroom versus 1–2 kW systems, supporting\n        typical 3 kW ranges in mild steel, stainless, and aluminum for contract fabrication, OEM components,\n        and general job shop work.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eStandard 4×8 ft (48×96\") bed:\u003c\/strong\u003e accepts full-size North American sheets for efficient\n        nesting, reduced trim waste, and straightforward material handling with common carts and racks.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFull-cover, Class 1 enclosure:\u003c\/strong\u003e light-tight housing with safety interlocks and filtered\n        windows, suitable for mixed-use production floors where laser safety and clean air are critical.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegrated fume extraction and industrial chiller:\u003c\/strong\u003e included as part of the package to\n        maintain cut quality, protect optics, and support multi-shift operation when installed correctly.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFSCUT controller with CypCut CAM:\u003c\/strong\u003e widely used industrial control stack with fast DXF import,\n        intelligent nesting, micro-joints, corner smoothing, and simulation for reduced programming time and\n        predictable cycle times.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e motorized focus adjustment tracks thickness changes and sheet warp,\n        keeping kerf width, pierce reliability, and edge quality consistent across the entire 4×8 bed.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eRaycus or IPG fiber source options:\u003c\/strong\u003e choose the powertrain that fits your internal standards,\n        service model, and budget without changing the overall machine concept.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAssist gas flexibility:\u003c\/strong\u003e supports N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, and dry air, allowing you to\n        balance edge quality, speed, and cost per part depending on material and job type.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cp\u003e\n      This 3 kW enclosed fiber laser is delivered as a \u003cstrong\u003ecomplete cutting system\u003c\/strong\u003e: fiber source,\n      motion platform, controller, enclosure, chiller, and fume extraction are designed to work together as a\n      production cell when installed and maintained according to specification.\n    \u003c\/p\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 3 kW fiber (Raycus or IPG)\u003c\/p\u003e\n        \u003cp\u003e\n          Industrial-grade fiber source sized for higher cutting speeds and increased thickness envelope compared to\n          1–2 kW systems, while still keeping electrical and gas consumption manageable for mid-size shops.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eWorking area \/ bed size:\u003c\/strong\u003e 4×8 ft (48×96\" \/ ~1219×2438 mm)\u003c\/p\u003e\n        \u003cp\u003e\n          Designed around standard 4×8 sheet stock for structural parts, panels, and OEM flat patterns; supports\n          efficient nesting strategies and straightforward integration with existing material storage.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eController \u0026amp; CAM:\u003c\/strong\u003e FSCUT with CypCut\u003c\/p\u003e\n        \u003cp\u003e\n          Includes DXF\/DWG import, automatic and manual nesting, lead-in\/lead-out control, micro-joints, common-edge\n          cutting, corner smoothing, and graphical simulation, helping programmers verify toolpaths before cutting.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Auto-focus fiber cutting head\u003c\/p\u003e\n        \u003cp\u003e\n          Motorized focus and capacitive height sensing handle varying plate flatness and thickness; focus presets and\n          parameter libraries in CypCut simplify setup for different materials and gauges.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1\u003c\/p\u003e\n        \u003cp\u003e\n          Light-tight enclosure with interlocked doors and observation windows; designed to contain reflections,\n          smoke, and noise, and to support safety compliance in general fabrication shops, schools, and OEM plants.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eFume extraction:\u003c\/strong\u003e Integrated extraction system\u003c\/p\u003e\n        \u003cp\u003e\n          Pulls fumes at the cutting zone through ducted extraction; proper connection to your facility exhaust helps\n          protect optics, maintain beam quality, and keep the shop environment cleaner and safer.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCooling:\u003c\/strong\u003e Industrial chiller (included)\u003c\/p\u003e\n        \u003cp\u003e\n          Dedicated chiller circuit for the laser source and optics, maintaining stable temperatures for consistent\n          performance and extended component life under continuous or multi-shift production loads.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, dry air\u003c\/p\u003e\n        \u003cp\u003e\n          Configure nitrogen for oxide-free edges on stainless and aluminum, oxygen for fast production cutting of\n          carbon steel, and shop air for cost-effective cutting on non-cosmetic parts where light oxidation is\n          acceptable.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eMotion system:\u003c\/strong\u003e Servo-driven gantry\u003c\/p\u003e\n        \u003cp\u003e\n          Precision servo motors and a rigid gantry structure (with linear guides and appropriate drives) provide\n          repeatable positioning, sharp internal corners, and smooth contouring over the entire 4×8 workspace.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eTypical cutting range (reference only):\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp\u003e\n          Representative ranges for 3 kW systems (exact capacity depends on material grade, gas, and quality\n          requirements):\u003cbr\u003e\n          · Carbon steel – thin sheet through mid-gauge plate in O\u003csub\u003e2\u003c\/sub\u003e or N\u003csub\u003e2\u003c\/sub\u003e\u003cbr\u003e\n          · Stainless steel – enclosure and bracket gauges in N\u003csub\u003e2\u003c\/sub\u003e with bright edges\u003cbr\u003e\n          · Aluminum – common cover and panel thicknesses using N\u003csub\u003e2\u003c\/sub\u003e or air\u003cbr\u003e\n          · Non-ferrous (e.g., brass) – signage and hardware thicknesses within rated charts\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n    \u003c\/div\u003e\n    \u003cp class=\"umpro-product__note\"\u003e\n      \u003cem\u003e\n        Note: final cutting capacity and speed are influenced by material grade and surface, gas quality\/pressure,\n        nozzle selection, and cut parameters. Always validate critical thicknesses and edge requirements with test\n        cuts and approved part samples.\n      \u003c\/em\u003e\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003e\n      The 3 kW enclosed 4×8 system is often chosen as a \u003cstrong\u003eprimary cutting cell\u003c\/strong\u003e for shops that need to\n      handle both thin sheet and moderate plate thicknesses, with a mix of prototypes, repeat orders, and production\n      contracts. It integrates naturally with press brakes, hardware insertion, welding, and assembly lines.\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePanels \u0026amp; enclosures:\u003c\/strong\u003e flat patterns for electrical cabinets, industrial controls, machine\n        panels, and access doors in steel, stainless, and aluminum.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eBrackets \u0026amp; mounting hardware:\u003c\/strong\u003e gussets, mounting plates, support brackets, and small\n        structural details prepared for bending and welding.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eHVAC \u0026amp; ducting:\u003c\/strong\u003e flat patterns for duct sections, flanges, hanger brackets, plenums,\n        and housings with clean edges and accurate hole patterns.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eMachine guards \u0026amp; safety components:\u003c\/strong\u003e perforated guards, covers, and shields with\n        consistent hole patterns and perimeter accuracy.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOEM and contract manufacturing:\u003c\/strong\u003e repeated part families with stored programs and parameter\n        sets, simplifying scheduling and cross-shift operation.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eGeneral job-shop work:\u003c\/strong\u003e one-off and prototype parts alongside small production runs, where\n        quick DXF import and nesting are critical to profitability.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegration into fab cells:\u003c\/strong\u003e upstream cutting for press brakes, robotic welding cells, and\n        final assembly, with tooling and bend lines placed in CAD\/CAM for smooth handoff.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 3 kW 4×8 enclosed fiber laser is shipped as a \u003cstrong\u003eready-to-run production platform\u003c\/strong\u003e,\n      with configuration choices that let you align the system with your internal standards, throughput targets, and\n      material mix.\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eBase system:\u003c\/strong\u003e 3 kW fiber laser (Raycus or IPG), full-cover Class 1 enclosure, auto-focus\n        cutting head, FSCUT controller with CypCut CAM, integrated fume extraction, and industrial chiller.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFiber source options:\u003c\/strong\u003e Raycus or IPG at 3 kW—selected based on your preferred support network,\n        budget, and in-house standards.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAssist gas configuration:\u003c\/strong\u003e plumbing and regulator options for N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e,\n        and dry air; we can help define gas strategy by material, thickness, and edge quality requirements.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eSoftware \u0026amp; workflow:\u003c\/strong\u003e CypCut standard; support for parameter libraries, job templates,\n        and integration with your drawing and ERP workflow (e.g. DXF-driven job queues).\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eHandling \u0026amp; integration:\u003c\/strong\u003e recommendations for sheet carts, racks, and interface points when\n        tying the laser into press brake cells, welding stations, or automation.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eSafety \u0026amp; compliance:\u003c\/strong\u003e guarding, interlocks, and enclosure design support typical US\n        shop safety practices; consult for local code and ventilation requirements.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--process\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eProcess notes \u0026amp; best practices for 3 kW cutting\u003c\/h3\u003e\n    \u003cp\u003e\n      Getting full value from a 3 kW fiber laser means standardizing a few \u003cstrong\u003einternal cutting rules\u003c\/strong\u003e\n      and parameter sets tailored to your material mix:\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAlign gas choice with edge requirements:\u003c\/strong\u003e use nitrogen for bright edges on stainless and\n        aluminum, oxygen for high-speed carbon steel cutting where oxide is acceptable, and dry air for non-cosmetic\n        production parts where cost per part is critical.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eBuild parameter libraries by material \u0026amp; thickness:\u003c\/strong\u003e create named sets (e.g.\n        “A36-10ga-O2”, “304-14ga-N2-finish”, “5052-0.125-air”) and lock them into CypCut so operators select recipes\n        rather than guessing at speed and power.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOptimize pierce routines for thicker gauges:\u003c\/strong\u003e use dedicated pierce settings (time, power,\n        height) to minimize spatter, improve reliability, and protect the nozzle\/protective window on heavy cuts.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eUse micro-joints where needed:\u003c\/strong\u003e apply micro-tabs on small parts or internal scrap to prevent\n        tip-up and collisions, then tune tab size and location for easy removal and clean cosmetic edges.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eMaintain optics and table regularly:\u003c\/strong\u003e establish daily checks for nozzle alignment and\n        protective windows, plus weekly\/monthly routines for lens inspection, fume extraction filters, and slat\n        condition on the cutting bed.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eValidate new materials with trial cuts:\u003c\/strong\u003e for any new supplier or grade, run short test nests\n        to confirm edge quality and adjust cut speed, power, and gas pressure before committing to full production.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp class=\"umpro-product__note\"\u003e\n      \u003cem\u003e\n        Capacity and quality always depend on the combination of material, tooling, gas, and parameter setup. We\n        recommend keeping “golden sample” parts and approved parameter sets to benchmark performance over time.\n      \u003c\/em\u003e\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003e\n      We partner with US job shops, OEMs, and contract manufacturers to make sure your 3 kW, 4×8 ft fiber laser is\n      \u003cstrong\u003especified, installed, and integrated\u003c\/strong\u003e for your actual parts—not just installed on the floor.\n      From first parts to steady production, our team focuses on practical throughput and edge quality.\n    \u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePre-installation planning:\u003c\/strong\u003e review power, floor loading, access, exhaust routing, and gas\n        supply so the machine arrives to a ready site with minimal surprises.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eApplication review:\u003c\/strong\u003e send sample parts and thickness ranges; we confirm feasibility, discuss\n        gas strategy, and propose starting parameters for your main materials.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eProgramming \u0026amp; nesting support:\u003c\/strong\u003e assistance with CypCut setup, nesting rules, micro-joint\n        strategy, and skeleton handling tailored to your workflow and downstream operations.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOperator \u0026amp; maintenance training:\u003c\/strong\u003e onsite or remote training covering safety, startup and\n        shutdown, parameter selection, basic troubleshooting, optics care, and maintenance intervals.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOngoing process support:\u003c\/strong\u003e help with new materials, parameter optimization, and integration\n        questions as you bring more parts and jobs onto the laser.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003e\n      \u003cstrong\u003eNext step:\u003c\/strong\u003e send us a selection of your typical parts (DXF\/STEP\/PDF) along with material grades\n      and thicknesses, and we’ll estimate cycle times, confirm fit, and recommend the best 3 kW, 4×8 ft configuration\n      for your shop.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e\n","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966013862254,"sku":"UFL-4x8-3KW-ENC","price":99900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-12kw-enclosed-fiber-laser-cutter-6x20ft-fscut-5723155.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-6kw-4x8ft","title":"Umprotech Enclosed Fiber Laser Cutter 6kW 4x8ft FSCUT","description":"\u003csection class=\"umpro-product\"\u003e\u003cheader class=\"umpro-product__hero\"\u003e\n\u003ch2 class=\"umpro-product__title\"\u003eUmprotech Enclosed Fiber Laser Cutter – 6 kW · 4×8 ft · FSCUT Control\u003c\/h2\u003e\n\u003cp class=\"umpro-product__subtitle\"\u003eA fully enclosed 6 kW fiber laser cutting system designed for North American job shops, OEMs, and fabrication cells that need high-speed cutting on standard 4×8 sheets, with industrial controls and stable process hardware. Built around the 4×8 ft (48×96″) shop standard, this machine combines throughput, edge quality, and Class 1 safety for demanding mixed-material, mixed-gauge production.\u003c\/p\u003e\n\u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW · \u003cstrong\u003eBed size:\u003c\/strong\u003e 4×8 ft (48×96″) · \u003cstrong\u003eController:\u003c\/strong\u003e FSCUT \/ CypCut · \u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1\u003c\/p\u003e\n\u003c\/header\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 6 kW enclosed fiber laser is positioned as a \u003cstrong\u003eproduction-grade 4×8 cutting cell\u003c\/strong\u003e for shops that need to cut faster, go thicker, or pull work back from plasma and turret punching—without jumping into an oversized or custom-format platform. It is built around proven components and a control stack widely used in North American fabrication.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 kW fiber laser power:\u003c\/strong\u003e delivers high cutting speeds and extended thickness capability on carbon steel, stainless, and aluminum compared to 2–3 kW systems—ideal for structural parts, heavier brackets, and thicker plates within typical 6 kW ranges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard 4×8 ft (48×96″) bed:\u003c\/strong\u003e accepts common North American sheet sizes straight from racks and pallets, simplifies nesting strategies, and keeps material handling in line with existing shop equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-cover, Class 1 enclosure:\u003c\/strong\u003e light-tight housing with interlocked doors and viewing windows, keeping operators protected from laser radiation and containing fumes and particulate for a cleaner production environment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFSCUT controller with CypCut CAM:\u003c\/strong\u003e industrial motion control and CAM suite with DXF import, automatic and manual nesting, micro-joints, common-line cutting, and simulation to verify toolpaths before cutting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e automatically adjusts focus height to match sheet thickness and real-world warp, maintaining stable kerf width, pierce performance, and edge quality across the full 4×8 area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated fume extraction and industrial chiller:\u003c\/strong\u003e included as part of the system, helping to protect optics, maintain beam stability, and support multi-shift production when installed with proper exhaust and cooling infrastructure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaycus or IPG fiber source options:\u003c\/strong\u003e choose the powertrain that aligns with your internal standards, service preferences, and budget—without changing the machine concept or control environment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssist gas flexibility (N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, air):\u003c\/strong\u003e run nitrogen for bright, oxide-free edges, oxygen for high-speed carbon steel production, or dry air for cost-sensitive parts where light oxidation is acceptable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n\u003cp\u003eThe 6 kW Umprotech enclosed fiber laser is delivered as a \u003cstrong\u003ecomplete cutting package\u003c\/strong\u003e: fiber source, motion platform, auto-focus head, controller, full enclosure, fume extraction, and chiller are designed to work together as a single production cell when installed to specification.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__specs-grid\"\u003e```\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber (Raycus or IPG)\u003c\/p\u003e\n\u003cp\u003eHigh-power fiber source provides the cutting headroom to process thicker gauges and run higher feed rates on mild steel, stainless, and aluminum, while maintaining tight beam quality and stable operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eBed size \/ working area:\u003c\/strong\u003e 4×8 ft (48×96″ \/ ~1219×2438 mm)\u003c\/p\u003e\n\u003cp\u003eSized for standard 4×8 sheets, supporting efficient nesting of mixed part families, panel work, brackets, and job-shop components without specialty stock or re-squaring operations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eController \u0026amp; CAM:\u003c\/strong\u003e FSCUT control with CypCut\u003c\/p\u003e\n\u003cp\u003eCombines real-time motion control with CypCut’s CAM features: DXF import, automatic\/interactive nesting, lead-in\/lead-out optimization, micro-joints, common-line cutting, corner smoothing, and cut-path simulation to verify jobs before production.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Auto-focus fiber cutting head\u003c\/p\u003e\n\u003cp\u003eMotorized focus axis with capacitive height sensing automatically maintains focal position as material thickness and flatness vary. Parameter presets in CypCut allow recall of optimized focus positions, gas settings, and speeds by material and gauge.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1\u003c\/p\u003e\n\u003cp\u003eLight-tight, interlocked cabin with viewing windows designed for laser safety, fume containment, and noise reduction. Suitable for mixed-use production floors and shops where operators and visitors move through the cutting area frequently.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eFume extraction:\u003c\/strong\u003e Integrated extraction system\u003c\/p\u003e\n\u003cp\u003eDucted extraction pulls smoke and particulates from the cutting zone; when connected to your building exhaust system it helps protect optics, maintain cut quality, and keep the surrounding area cleaner and safer for operators and downstream processes like painting and assembly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eCooling:\u003c\/strong\u003e Industrial chiller (included)\u003c\/p\u003e\n\u003cp\u003eDedicated chiller maintains stable temperature for the laser source and optics, supporting long-duty cycles, multi-shift operation, and consistent cutting performance under varying ambient conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eAssist gases:\u003c\/strong\u003e Nitrogen, oxygen, dry air\u003c\/p\u003e\n\u003cp\u003eGas plumbing and controls support multiple assist gases; oxygen for high-speed carbon steel cutting, nitrogen for clean edges on stainless and aluminum, and dry air as a cost-effective option for select jobs and non-cosmetic parts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eMotion system:\u003c\/strong\u003e Servo-driven gantry\u003c\/p\u003e\n\u003cp\u003ePrecision servo drives, linear guides, and a rigid gantry structure provide repeatable positioning and smooth contouring, enabling sharp internal corners, accurate holes, and consistent geometry across the full 4×8 ft working envelope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003cp\u003e\u003cstrong\u003eTypical cutting range (reference only):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRepresentative ranges for 6 kW systems (exact capabilities depend on material grade, condition, gas type, gas pressure, and edge-quality requirements):\u003cbr\u003e· Carbon steel – thin sheet through heavier plate in O\u003csub\u003e2\u003c\/sub\u003e or N\u003csub\u003e2\u003c\/sub\u003e\u003cbr\u003e· Stainless steel – panel and enclosure gauges in N\u003csub\u003e2\u003c\/sub\u003e with bright edges\u003cbr\u003e· Aluminum – typical machinery covers, panels, and structural profiles\u003cbr\u003e· Non-ferrous (e.g., brass) – signage and hardware within manufacturer-recommended charts\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"umpro-product__note\"\u003e\u003cem\u003e Final cutting capacity and recommended thickness limits are defined by the laser source, optics, gas supply, and desired edge quality. Critical jobs should be validated with test cuts and approved sample parts. \u003c\/em\u003e\u003c\/p\u003e\n```\u003c\/section\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n\u003cp\u003eThe 6 kW 4×8 Umprotech enclosed fiber laser is often specified as a \u003cstrong\u003eprimary sheet cutting cell\u003c\/strong\u003e for plants replacing plasma or punch-heavy workflows, and for shops that want to consolidate thin- and mid-gauge cutting onto a single, high-throughput platform.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanels \u0026amp; enclosures:\u003c\/strong\u003e flat patterns for electrical cabinets, industrial control housings, machine panels, and access doors with accurate bend lines and hole patterns for downstream forming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrackets, gussets, and subframes:\u003c\/strong\u003e support members, bracket families, and structural details processed at higher speeds and tighter tolerances than plasma or mechanical shearing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine guards \u0026amp; safety components:\u003c\/strong\u003e perforated guards, covers, and shields with consistent perforation patterns and smooth, burr-minimized edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHVAC and building hardware:\u003c\/strong\u003e duct flanges, wall brackets, hangers, plenums, and support components cut from galvanized or coated steels where edge quality and dimensional accuracy matter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM and contract manufacturing:\u003c\/strong\u003e part families in steel, stainless, and aluminum with stored programs and parameter sets, enabling quick changeovers and reliable repeat orders.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJob shop and prototype work:\u003c\/strong\u003e quick-turn parts from customer DXFs, plus small production runs, where fast programming and nesting directly support quoting accuracy and delivery times.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegration into fab cells:\u003c\/strong\u003e upstream cutting for press brake cells, hardware insertion, robotic welding, and assembly lines, with cut patterns designed for efficient downstream handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 6 kW 4×8 ft enclosed fiber laser is offered as a \u003cstrong\u003eproduction-ready platform\u003c\/strong\u003e with configuration choices to align with your internal standards, gas strategy, and automation roadmap.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase configuration:\u003c\/strong\u003e 6 kW fiber source (Raycus or IPG), full-cover Class 1 enclosure, auto-focus cutting head, FSCUT controller with CypCut, integrated fume extraction, and industrial chiller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber source options:\u003c\/strong\u003e Raycus or IPG at 6 kW—selected based on your support preferences, installed base, and budget constraints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssist gas setup:\u003c\/strong\u003e configuration for N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, and\/or dry air, with guidance on regulators, storage, and supply needed for your material mix and throughput targets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoftware workflow:\u003c\/strong\u003e CypCut CAM standard, with support for parameter libraries, job templates, and integration into your existing drawing and ERP-driven job release process.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomation \u0026amp; handling (by project):\u003c\/strong\u003e compatibility with loading\/unloading concepts, conveyors, and downstream forming\/welding cells; discuss options for future automation or staged upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety \u0026amp; compliance:\u003c\/strong\u003e enclosure and interlock design supports typical US safety practices; consult for local code, ventilation, and permitting requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--process\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eProcess notes \u0026amp; best practices for 6 kW cutting\u003c\/h3\u003e\n\u003cp\u003eTo fully leverage a 6 kW platform, many shops standardize a set of \u003cstrong\u003einternal cutting rules and parameter libraries\u003c\/strong\u003e so operators rely on proven recipes rather than trial-and-error.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefine clear gas strategy:\u003c\/strong\u003e use oxygen for speed on carbon steel where oxide is acceptable; nitrogen for bright, oxide-free edges on stainless and aluminum; and dry air for select parts where cost per part is the main driver and slight edge oxidation is acceptable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild and lock parameter libraries:\u003c\/strong\u003e create named cut sets in CypCut for each material, thickness, and gas combination (e.g., “A36-3\/16-O2”, “304-11ga-N2-Finish”, “5052-0.190-air”) and lock them down after validation to avoid drift over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate pierce and cut settings:\u003c\/strong\u003e especially on thicker gauges, use optimized pierce routines (multi-step pierce, reduced power, appropriate height) to minimize spatter and protect the nozzle and protective window, then transition to higher-speed cutting parameters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse micro-joints and common-line cutting wisely:\u003c\/strong\u003e apply micro-tabs on small or scrap parts to avoid tip-up and collisions; use common-line cutting where geometry allows to reduce cycle time and heat input into the sheet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImplement regular optics and table maintenance:\u003c\/strong\u003e daily checks for nozzle condition and alignment, protective window cleanliness, and weekly\/monthly routines for lens inspection, extraction filter checks, and slat replacement or rotation keep cut quality stable and predictable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQualify new materials with short test nests:\u003c\/strong\u003e when changing suppliers, coatings, or grades, run small test patterns to confirm edge quality, dross behavior, and dimensional accuracy before launching full production nests.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__note\"\u003e\u003cem\u003e Actual performance and capacity depend on material quality, gas supply, cut parameters, and maintenance. We recommend maintaining “golden sample” parts and validated parameter sets as references for long-term process control. \u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n\u003cp\u003eWe work directly with US job shops, OEMs, and contract manufacturers to ensure the 6 kW 4×8 enclosed fiber laser is \u003cstrong\u003especified, installed, and integrated\u003c\/strong\u003e for your real-world part mix and throughput goals—not just dropped on the floor. From site readiness to first production lots, our focus is on uptime and repeatable quality.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-installation review:\u003c\/strong\u003e power requirements, floor loading, access\/rigging routes, exhaust routing, and gas infrastructure so the machine arrives to a prepared site.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication and part review:\u003c\/strong\u003e send typical part drawings (DXF\/STEP\/PDF) and thickness ranges; we confirm feasibility, discuss gas usage, and estimate cycle times and nesting strategies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgramming \u0026amp; nesting support:\u003c\/strong\u003e assistance with CypCut setup, parameter library creation, nesting rules, micro-joint strategy, and skeleton removal tailored to your downstream workflows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator and maintenance training:\u003c\/strong\u003e onsite or remote sessions covering safety, startup\/shutdown, job loading, parameter selection, basic troubleshooting, and preventive maintenance routines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOngoing process support:\u003c\/strong\u003e help with new materials, parameter optimization, and integration questions as more jobs are migrated onto the laser.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNext step:\u003c\/strong\u003e send us representative parts (DXF\/STEP\/PDF) along with material grades and thicknesses. We’ll confirm fit, outline expected cycle times, and recommend the best 6 kW 4×8 configuration for your shop.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966013895022,"sku":"UFL-4x8-6KW-ENC","price":139900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-12kw-enclosed-fiber-laser-cutter-6x20ft-fscut-5723155.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-12kw-4x8ft","title":"Umprotech Enclosed Fiber Laser Cutter 12kW 4x8ft FSCUT","description":"\u003csection class=\"umpro-product umpro-product--flagship\"\u003e\u003c!-- HERO \/ OVERVIEW --\u003e\u003cheader class=\"umpro-product__hero\"\u003e\n\u003cp class=\"umpro-product__eyebrow\"\u003eHigh-Power Enclosed Fiber Laser Cutting Cell · Built for US Production\u003c\/p\u003e\n\u003ch2 class=\"umpro-product__title\"\u003eUmprotech Enclosed Fiber Laser Cutter – 12 kW · 4×8 ft · FSCUT \/ CypCut Control\u003c\/h2\u003e\n\u003cp class=\"umpro-product__subtitle\"\u003eHigh-power, fully enclosed fiber laser cutting system designed for US job shops, OEMs, and fabrication plants that need \u003cstrong\u003efast, repeatable full-sheet processing\u003c\/strong\u003e. Built around a 12 kW fiber source and a standard 4×8 ft (48×96\") bed, this machine delivers industrial-grade throughput, cut quality, and safety for demanding production environments—without compromising on control, nesting, or operator ergonomics.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__hero-grid\"\u003e\n\u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eLaser Power:\u003c\/strong\u003e 12 kW fiber (Raycus \/ IPG) · \u003cstrong\u003eBed Size:\u003c\/strong\u003e 4×8 ft (48×96\") · \u003cstrong\u003eController:\u003c\/strong\u003e FSCUT with CypCut CAM \/ nesting\u003c\/p\u003e\n\u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 · \u003cstrong\u003eHead:\u003c\/strong\u003e Auto-focus fiber cutting head · \u003cstrong\u003eAssist Gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e \/ O\u003csub\u003e2\u003c\/sub\u003e \/ dry air\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"umpro-product__hero-points\"\u003e\n\u003cli\u003eHigh-power 12 kW fiber source for thick plate and high-speed thin-gauge cutting\u003c\/li\u003e\n\u003cli\u003e4×8 ft bed matches common US sheet sizes for efficient nesting and inventory\u003c\/li\u003e\n\u003cli\u003eFully enclosed, Class 1 design with integrated fume extraction and industrial chiller\u003c\/li\u003e\n\u003cli\u003eFSCUT controller with CypCut nesting for fast DXF\/STEP-to-part workflow\u003c\/li\u003e\n\u003cli\u003eRaycus or IPG source options to match your standards and service preferences\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/header\u003e\u003c!-- POSITIONING \/ VALUE FOR US BUYERS --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 12 kW, 4×8 ft enclosed fiber laser is positioned as a \u003cstrong\u003ehigh-throughput full-sheet cutting cell\u003c\/strong\u003e for US fabrication shops that need:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 kW fiber power for serious throughput:\u003c\/strong\u003e cut common gauges at very high speed and push into thicker plate ranges on carbon steel, stainless, and aluminum. The power envelope supports both fast, thin-gauge production and robust processing of heavier sections, depending on your assist gas and edge-quality needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard 4×8 ft (48×96\") bed:\u003c\/strong\u003e sized for US sheet formats to simplify material purchasing, handling, and nesting. Full-sheet nests reduce skeleton handling and make it easier to schedule large batches and kit-based jobs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-cover, Class 1 safety enclosure:\u003c\/strong\u003e light-tight housing with interlocks and viewing windows, plus integrated fume extraction and industrial chiller. Supports safe operation in busy plants, simplifies risk assessments for safety teams, and helps keep process smoke under control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e tracks material thickness and warp, maintaining consistent kerf width, pierce behavior, and edge quality across the full 4×8 ft working envelope—even when running mixed thicknesses or remnants within a shift.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFSCUT controller with CypCut software:\u003c\/strong\u003e widely used industrial control stack, giving your programmers and operators access to fast DXF\/STEP import, nesting, lead-in\/lead-out control, micro-joints, common-line cutting, and simulation—all tailored for high-mix and high-throughput work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaycus or IPG fiber source options:\u003c\/strong\u003e choose based on your installed base, preferred service network, and internal engineering standards for laser sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegration-ready for fabrication cells:\u003c\/strong\u003e well suited as a primary cutting center feeding press brakes, panel benders, hardware insertion, welding, and assembly lines. Network connectivity and file workflows align with modern CAD\/ERP environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003c!-- TECHNICAL PERFORMANCE OVERVIEW --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--performance\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eHigh-power cutting performance\u003c\/h3\u003e\n\u003cp\u003eA 12 kW fiber source in a 4×8 ft envelope provides enough headroom to handle both \u003cstrong\u003ehigh-speed thin-gauge work\u003c\/strong\u003e and \u003cstrong\u003ethicker plate applications\u003c\/strong\u003e, depending on your material, assist gas, and edge-quality requirements.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__metrics-grid\"\u003e\n\u003cdiv class=\"umpro-product__metric\"\u003e\n\u003cp class=\"umpro-product__metric-label\"\u003eTypical thickness envelope*\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon steel: thin gauge up through heavy plate ranges (application dependent)\u003c\/li\u003e\n\u003cli\u003eStainless steel: from light gauge up into structural thicknesses\u003c\/li\u003e\n\u003cli\u003eAluminum: from thin sheet up into thicker sections, alloy and finish dependent\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__metric-note\"\u003e*Exact limits depend on alloy, assist gas, desired edge quality, and cycle time expectations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__metric\"\u003e\n\u003cp class=\"umpro-product__metric-label\"\u003eProductivity focus\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-speed cutting of 10–14 gauge material\u003c\/li\u003e\n\u003cli\u003eFull-sheet nesting for extended unattended cycles\u003c\/li\u003e\n\u003cli\u003eReduced pierce time and faster acceleration \/ deceleration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__metric-note\"\u003eIdeal as a primary production laser for shops where laser time is the bottleneck.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__metric\"\u003e\n\u003cp class=\"umpro-product__metric-label\"\u003eQuality \u0026amp; repeatability*\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean edges suitable for painting, powder coating, or welding prep\u003c\/li\u003e\n\u003cli\u003eTight internal features and reliable hole geometry\u003c\/li\u003e\n\u003cli\u003eConsistent fit-up on recurring part families and kits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__metric-note\"\u003e*Final tolerances should always be validated on your own parts and fixturing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c!-- DETAILED TECHNICAL SPECIFICATIONS --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 12 kW 4×8 enclosed fiber laser is delivered as a \u003cstrong\u003ecomplete cutting cell\u003c\/strong\u003e, with laser source, motion system, auto-focus head, full enclosure, fume extraction, chiller, and FSCUT control stack supplied as a unified package.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__specs-grid\"\u003e\n\u003c!-- LASER POWER --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eLaser power \u0026amp; source\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 12 kW fiber (Raycus or IPG)\u003c\/p\u003e\n\u003cp\u003eHigh-power fiber output supports:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eVery high cutting speeds on thin and mid-gauge materials\u003c\/li\u003e\n\u003cli\u003eEntry into heavier plate for structural and machinery components\u003c\/li\u003e\n\u003cli\u003eShorter pierce times and robust cutting of thicker sections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoth Raycus and IPG are proven industrial laser sources with stable power delivery, supporting long duty cycles and demanding production schedules.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- WORKING ENVELOPE --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eWorking envelope\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eBed size \/ stroke:\u003c\/strong\u003e 4×8 ft (48×96\") nominal working area\u003c\/p\u003e\n\u003cp\u003eThis standard US sheet format:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eAligns with common stock sizes from US steel suppliers\u003c\/li\u003e\n\u003cli\u003eSupports full-sheet nests for long unattended runs\u003c\/li\u003e\n\u003cli\u003eReduces offcut complexity and skeleton handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe machine can also run partial sheets, remnants, and blanks, with CypCut nesting adjusted for your material usage strategy.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- CONTROLLER \/ CAM --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eController \u0026amp; CAM \/ nesting\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eControl:\u003c\/strong\u003e FSCUT motion and laser control\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSoftware:\u003c\/strong\u003e CypCut CAM \/ nesting\u003c\/p\u003e\n\u003cp\u003eFSCUT + CypCut provide the core of the programming workflow:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eDXF \/ DWG \/ STEP import from your CAD system\u003c\/li\u003e\n\u003cli\u003eAutomatic and interactive nesting for full-sheet layouts\u003c\/li\u003e\n\u003cli\u003eLead-in\/lead-out optimization, micro joints, and tabbing\u003c\/li\u003e\n\u003cli\u003eCommon-line cutting to reduce pierces and cycle time\u003c\/li\u003e\n\u003cli\u003eCut-path simulation and sequence control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe controller is widely adopted in industrial environments, making it easier to find operators and integrate the machine into existing CNC workflows.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- CUTTING HEAD --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eCutting head \u0026amp; auto-focus\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Auto-focus fiber laser cutting head\u003c\/p\u003e\n\u003cp\u003eThe motorized focus axis and capacitive height sensing system:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eTrack sheet warp and camber across the full 4×8 ft area\u003c\/li\u003e\n\u003cli\u003eAdjust focus for different thicknesses and materials\u003c\/li\u003e\n\u003cli\u003eMaintain consistent kerf width and pierce quality\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eParameter sets tie focus height, speed, and gas pressure to specific material \/ thickness combinations for repeatable results across operators and shifts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ENCLOSURE \/ SAFETY --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eEnclosure \u0026amp; safety\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 light-tight housing\u003c\/p\u003e\n\u003cp\u003eThe enclosure includes:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eInterlocked doors and access panels\u003c\/li\u003e\n\u003cli\u003eViewing windows for process monitoring\u003c\/li\u003e\n\u003cli\u003eInternal lighting for visibility of the cutting area\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis layout helps align with typical US laser safety expectations, making it easier for safety teams to assess and approve the installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- UTILITIES \/ CHILLER \/ EXTRACTION --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eUtilities, chiller \u0026amp; extraction\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e integrated fume extraction and industrial chiller\u003c\/p\u003e\n\u003cp\u003eThe chiller provides stable cooling for:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eLaser source cooling circuit\u003c\/li\u003e\n\u003cli\u003eOptics and cutting head cooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe fume extraction system captures process smoke at the cutting zone and routes it to your plant exhaust or filtration system, helping maintain air quality and protect optics and mechanics.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ASSIST GASES --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eAssist gases \u0026amp; strategy\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eAssist gases:\u003c\/strong\u003e Nitrogen (N\u003csub\u003e2\u003c\/sub\u003e), Oxygen (O\u003csub\u003e2\u003c\/sub\u003e), and dry air\u003c\/p\u003e\n\u003cp\u003eTypical strategies include:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOxygen:\u003c\/strong\u003e high-speed cutting of carbon steel with an oxidized edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNitrogen:\u003c\/strong\u003e bright, oxide-free edges on stainless and aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry air:\u003c\/strong\u003e cost-efficient cutting where a light oxide color is acceptable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe can help estimate consumption and recommend gas storage \/ regulation based on your duty cycle and material mix.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- MOTION SYSTEM --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eMotion system \u0026amp; structure\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eMotion:\u003c\/strong\u003e servo-driven gantry with precision linear guidance\u003c\/p\u003e\n\u003cp\u003eDesigned to support:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eSmooth high-speed motion with controlled acceleration \/ deceleration\u003c\/li\u003e\n\u003cli\u003eAccurate interpolation on small features and tight radii\u003c\/li\u003e\n\u003cli\u003eRepeatable positioning across the full 4×8 ft sheet area\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRobust structural design and servo drives help maintain performance in continuous production environments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ELECTRICAL \/ FOOTPRINT (HIGH LEVEL) --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eElectrical \u0026amp; footprint (high level)\u003c\/h4\u003e\n\u003cp\u003eDetailed drawings and requirements are provided during specification, but the system is designed for:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eIntegration into typical US industrial 3-phase power infrastructure\u003c\/li\u003e\n\u003cli\u003ePlacement in fabrication bays, production cells, or dedicated laser rooms\u003c\/li\u003e\n\u003cli\u003eRigging via standard industrial methods, reviewed in advance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe review access paths, overhead clearances, and anchoring needs prior to shipment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"umpro-product__note\"\u003e\u003cem\u003e Actual cutting capacity, achievable tolerances, and throughput depend on material grade, assist gas, process parameters, part geometry, nesting strategy, and edge-quality requirements. Critical parts and tolerances should always be validated using sample cuts and approved parameter sets. \u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- APPLICATIONS \/ USE CASES --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 12 kW 4×8 enclosed fiber laser is engineered as a \u003cstrong\u003eprimary production laser\u003c\/strong\u003e for flat-sheet processing. It can operate as a standalone cutting cell or as part of an integrated fabrication line with press brakes, panel benders, saws, hardware insertion, and welding stations.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__usecases-grid\"\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003ePanels \u0026amp; enclosures\u003c\/h4\u003e\n\u003cp\u003eHigh-throughput processing of full-sheet nests for electrical cabinets, machine enclosures, HVAC panels, and architectural elements, with accurate bend lines and features for downstream forming.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eBrackets, gussets \u0026amp; structural parts\u003c\/h4\u003e\n\u003cp\u003eBrackets, flanges, connection plates, stiffeners, and gussets for machinery, construction, and structural fabrications—where repeatable hole patterns and edge quality are essential for welding and assembly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eMachine guards \u0026amp; safety components\u003c\/h4\u003e\n\u003cp\u003ePerforated guards, covers, and shields in steel or stainless, with consistent geometry and surface quality, supporting both safety and visual standards on machinery and equipment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eHVAC \u0026amp; building hardware\u003c\/h4\u003e\n\u003cp\u003eDuct components, mounting hardware, access panels, and brackets where clean edges and dimensional consistency support fast assembly and installation in the field.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eSignage \u0026amp; branding plates\u003c\/h4\u003e\n\u003cp\u003eLetters, logos, and decorative profiles in stainless and aluminum with edges suitable for brushing, powder coating, or architectural finishes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eOEM \u0026amp; contract manufacturing\u003c\/h4\u003e\n\u003cp\u003eRecurring part families for machinery, vehicles, equipment, and industrial products. Programs, nests, and parameter sets can be stored and recalled for consistent performance over long product lifecycles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eHigh-mix \/ low-volume work\u003c\/h4\u003e\n\u003cp\u003eMixed alloys and thicknesses processed on a single machine, with CypCut enabling efficient nesting, fast turnarounds, and reduced setup time between jobs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003ePrototype to production transition\u003c\/h4\u003e\n\u003cp\u003eStart with prototype runs and pilot builds, then scale into ongoing production on the same platform. This reduces risk when moving from engineering validation into steady-state manufacturing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eFor many shops, this 12 kW 4×8 cell becomes the \u003cstrong\u003eprimary laser asset\u003c\/strong\u003e, handling both long-run full-sheet production and faster-turn, high-mix work as scheduling demands change.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- CONFIGURATIONS \u0026 OPTIONS --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 12 kW 4×8 enclosed fiber laser is supplied as a \u003cstrong\u003eready-to-run package\u003c\/strong\u003e. Core elements—laser source, auto-focus head, FSCUT control, full enclosure, chiller, and extraction—are standard. Configuration options allow alignment with your standards, gas strategy, and integration approach.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser source options:\u003c\/strong\u003e 12 kW Raycus or 12 kW IPG. Choose based on your existing installed base, service partners, or internal engineering guidelines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssist gas configuration:\u003c\/strong\u003e support for nitrogen, oxygen, and dry air. We can review your part mix and thickness ranges and recommend suitable storage, regulation, and line routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl stack:\u003c\/strong\u003e FSCUT controller with CypCut CAM \/ nesting as standard. No separate basic CAM purchase is required for 2D flat-sheet programming, nesting, and simulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e supplied as standard, with parameter libraries organized by material and thickness to simplify daily operation and cross-shift consistency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-cover enclosure \u0026amp; extraction:\u003c\/strong\u003e included to simplify safety approvals and provide a clean installation footprint in production bays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial chiller:\u003c\/strong\u003e sized for 12 kW duty and included with the system. Supports thermal stability and consistent performance on long production runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork \u0026amp; workflow integration:\u003c\/strong\u003e support for typical network connections and file-transfer methods so the machine can integrate into your existing CAD\/ERP or job-release process.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomation readiness:\u003c\/strong\u003e the 4×8 platform is compatible with common loading \/ unloading concepts and simple material carts if you later decide to automate material handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003c!-- IMPLEMENTATION \u0026 SUPPORT --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n\u003cp\u003eWe work closely with US job shops, OEMs, and contract manufacturers to ensure the 12 kW 4×8 fiber laser is \u003cstrong\u003especified, installed, and supported\u003c\/strong\u003e around real production requirements—not just brochure numbers. The focus is on uptime, predictable quality, and clear ROI.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-installation planning:\u003c\/strong\u003e detailed review of power, floor space, exhaust routing, gas supply, rigging, and access paths. This reduces risk at installation and helps ensure a smooth start-up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart \u0026amp; application review:\u003c\/strong\u003e you can share representative DXF\/STEP\/PDF files and thickness ranges. We confirm process windows, suggest assist gas strategies, and estimate representative cycle times.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCypCut workflow setup:\u003c\/strong\u003e assistance with programming, nesting setups, standard micro-joint strategies, common-line cutting, and parameter libraries tailored to your part mix.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator \u0026amp; maintenance training:\u003c\/strong\u003e onsite or remote training covering safe operation, startup\/shutdown, parameter selection, routine checks, and basic troubleshooting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOngoing process support:\u003c\/strong\u003e help with new materials, cut-quality optimization, cycle-time improvements, and integration questions as more of your work moves onto the 12 kW cell.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__cta\"\u003e\u003cstrong\u003eNext step:\u003c\/strong\u003e send us representative part files (DXF\/STEP\/PDF) and material specifications. We’ll confirm fit, outline expected cycle times, and recommend the best 12 kW 4×8 configuration for your shop and production goals.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- TECHNICAL FAQ --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--faq umpro-product-faq\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eTechnical FAQ – 12 kW · 4×8 ft enclosed fiber laser\u003c\/h3\u003e\n\u003cdiv class=\"umpro-product-faq__grid\"\u003e\n\u003c!-- FAQ ITEM --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhat thickness range can a 12 kW, 4×8 fiber laser realistically handle?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003e12 kW provides substantial headroom for both thin and thick materials. In practice, the machine is used for thin-gauge work at very high speeds and for heavier plate where edge quality and throughput can still be competitive with other cutting processes. Exact limits depend on:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eMaterial grade and supplier\u003c\/li\u003e\n\u003cli\u003eAssist gas choice (N\u003csub\u003e2\u003c\/sub\u003e vs O\u003csub\u003e2\u003c\/sub\u003e vs air)\u003c\/li\u003e\n\u003cli\u003eDesired edge quality and downstream operations (welding, coating, etc.)\u003c\/li\u003e\n\u003cli\u003eRequired cycle times and part volumes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe recommend running sample cuts on your specific materials and thickness ranges to confirm cut windows and final tolerances before committing production standards.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow does 12 kW compare to a 6 kW or 8 kW system for typical job-shop work?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eRelative to mid-power systems, 12 kW generally offers:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eHigher cutting speeds on thin and mid-gauge material\u003c\/li\u003e\n\u003cli\u003eMore capability in thicker plate ranges\u003c\/li\u003e\n\u003cli\u003eShorter pierce times and reduced cycle time per part on demanding jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhether 12 kW is the right choice depends on your material mix, thickness distribution, and production volumes. We can analyze your part mix to help decide if the additional power delivers a clear ROI compared to a 6–8 kW system.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eIs CypCut enough, or do we need separate CAM software?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eFor most flat-sheet laser applications, \u003cstrong\u003eCypCut is sufficient\u003c\/strong\u003e and is used as the primary programming and nesting environment. It handles:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eGeometry import from DXF\/DWG\/STEP\u003c\/li\u003e\n\u003cli\u003eFull-sheet nesting and common-line cutting\u003c\/li\u003e\n\u003cli\u003eLead-ins, micro joints, and sequence control\u003c\/li\u003e\n\u003cli\u003eProgram simulation and verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSome facilities still integrate with higher-level CAM or ERP systems for quoting, routing, or scheduling, but daily cutting programs typically flow through CypCut.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow steep is the learning curve for operators on FSCUT + CypCut?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eOperators with CNC or CAD experience generally adapt quickly. CypCut provides a graphical environment where they can see nests, pierces, and cut paths before starting the job. Our training covers:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eSafe startup \/ shutdown and daily checks\u003c\/li\u003e\n\u003cli\u003eLoading and adjusting nests\u003c\/li\u003e\n\u003cli\u003eSelecting parameters and materials from libraries\u003c\/li\u003e\n\u003cli\u003eBasic troubleshooting and simple parameter tuning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eParameter libraries significantly reduce daily guesswork and help standardize performance across multiple shifts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhat utilities and infrastructure do we need before installation?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eYou will receive a detailed pre-installation document, but in general you should plan for:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eSuitable 3-phase power with the specified voltage and amperage\u003c\/li\u003e\n\u003cli\u003eAssist gas supply (N\u003csub\u003e2\u003c\/sub\u003e\/O\u003csub\u003e2\u003c\/sub\u003e\/air) with adequate storage and regulation\u003c\/li\u003e\n\u003cli\u003eBuilding exhaust or filtration connection for the integrated fume extraction\u003c\/li\u003e\n\u003cli\u003eClear floor space, access paths, and rigging routes to the installation location\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese items are reviewed in detail before shipment so that installation proceeds smoothly and commissioning time is focused on your parts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhat ongoing maintenance is required for a 12 kW fiber laser?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eRoutine maintenance is primarily focused on optics protection, gas systems, and general mechanical health. Typical tasks include:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eInspecting and replacing nozzles and protective windows as needed\u003c\/li\u003e\n\u003cli\u003eChecking assist gas filtration and line condition\u003c\/li\u003e\n\u003cli\u003eMonitoring chiller levels and basic diagnostics\u003c\/li\u003e\n\u003cli\u003ePerforming periodic mechanical inspections and cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe provide maintenance schedules and checklists, and training covers how to carry out these tasks safely and correctly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow does the fully enclosed Class 1 design affect daily operation?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eThe Class 1 enclosure means that under normal conditions, laser radiation is contained within the machine. Interlocks prevent cutting when access doors are open. For operators, this translates to:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eSimple, repeatable operating routines\u003c\/li\u003e\n\u003cli\u003eReduced need for strict laser protective eyewear around the cell\u003c\/li\u003e\n\u003cli\u003eCleaner and more controlled cutting area with contained process light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor safety teams, a fully enclosed design simplifies risk assessments and helps integrate the cell into busy production areas alongside other equipment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eCan we integrate this machine into our existing CAD\/ERP workflow?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eYes. Typical integration patterns include:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eDriving geometry from your CAD system and part numbers from ERP\/MRP\u003c\/li\u003e\n\u003cli\u003eStoring DXF\/DWG\/STEP files in shared folders or PLM-controlled locations\u003c\/li\u003e\n\u003cli\u003eImporting these files into CypCut for nesting and parameter assignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe can review your current workflow and propose a simple handoff structure that keeps engineering, scheduling, and the laser cell aligned.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow do we determine if a 12 kW 4×8 cell is the right fit for our shop?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eThe best approach is to analyze your current and future part mix. We typically:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eReview representative part drawings and thickness distributions\u003c\/li\u003e\n\u003cli\u003eDiscuss your current bottlenecks and throughput targets\u003c\/li\u003e\n\u003cli\u003eEstimate cycle times and utilization on a 12 kW platform\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFrom there we can compare 12 kW against lower-power options and help decide which configuration aligns best with your budget, growth plans, and production strategy.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c\/div\u003e\n\u003cp class=\"umpro-product-faq__closing\"\u003e\u003cstrong\u003eStill have technical questions?\u003c\/strong\u003e Share your part drawings, material grades, and quantities. We’ll provide a targeted assessment and a configuration recommendation tailored to your production environment.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966014288238,"sku":"UFL-4x8-12KW-ENC","price":209900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-12kw-enclosed-fiber-laser-cutter-6x20ft-fscut-5723155.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-2kw-5x10ft","title":"Umprotech Enclosed Fiber Laser Cutter 2kW 5x10ft | FSCUT CypCut","description":"\u003csection class=\"umpro-product umpro-product--flagship\"\u003e\u003c!-- HERO \/ OVERVIEW --\u003e\u003cheader class=\"umpro-product__hero\"\u003e\n\u003cp class=\"umpro-product__eyebrow\"\u003eEnclosed Fiber Laser Cutting Cell · Optimized for US Sheet Formats\u003c\/p\u003e\n\u003ch2 class=\"umpro-product__title\"\u003eUmprotech Enclosed Fiber Laser Cutter – 2 kW · 5×10 ft · FSCUT \/ CypCut\u003c\/h2\u003e\n\u003cp class=\"umpro-product__subtitle\"\u003eA fully enclosed 2 kW fiber laser cutting system built for US job shops, OEMs, and fabrication cells that need \u003cstrong\u003ereliable, production-ready sheet cutting\u003c\/strong\u003e without oversizing power or budget. The 5×10 ft (60×120\") bed matches standard US material sizes, while the FSCUT controller with CypCut software streamlines programming, nesting, and shop-floor productivity for high-mix and recurring work.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__hero-grid\"\u003e\n\u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 2 kW fiber (Raycus \/ IPG) · \u003cstrong\u003eBed size:\u003c\/strong\u003e 5×10 ft (60×120\") · \u003cstrong\u003eController:\u003c\/strong\u003e FSCUT with CypCut CAM \/ nesting\u003c\/p\u003e\n\u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 · \u003cstrong\u003eHead:\u003c\/strong\u003e Auto-focus cutting head · \u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e \/ O\u003csub\u003e2\u003c\/sub\u003e \/ dry air (configuration dependent)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"umpro-product__hero-points\"\u003e\n\u003cli\u003e2 kW fiber power in a production-ready 5×10 ft platform\u003c\/li\u003e\n\u003cli\u003eFull-sheet nesting on standard US 60×120\" stock\u003c\/li\u003e\n\u003cli\u003eFully enclosed, Class 1 design with integrated extraction and chiller\u003c\/li\u003e\n\u003cli\u003eFSCUT + CypCut stack for fast DXF\/STEP-to-part workflow\u003c\/li\u003e\n\u003cli\u003eRaycus or IPG source options to align with your standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/header\u003e\u003c!-- POSITIONING \/ VALUE FOR US BUYERS --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 2 kW, 5×10 ft enclosed fiber laser is designed as a \u003cstrong\u003ecost-effective full-sheet cutting cell\u003c\/strong\u003e for shops that want:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced power for everyday work:\u003c\/strong\u003e 2 kW fiber is a proven power level for typical gauges of carbon steel, stainless, and aluminum in job-shop and OEM work. It delivers clean edges and practical cycle times without the higher infrastructure and gas consumption associated with very high-power systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry-standard 5×10 ft (60×120\") bed:\u003c\/strong\u003e sized to match common US sheet formats, making it easy to source stock, standardize nests, and run full-sheet jobs with fewer skeletons and offcuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-cover, Class 1 enclosure:\u003c\/strong\u003e light-tight housing with interlocked access points and viewing windows, helping safety teams approve the installation and shielding operators and other equipment from process light and fumes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e adapts to sheet warp, thickness changes, and remnants, helping reduce dross and inconsistent edges—especially important on mixed thickness jobs and partially used sheets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFSCUT controller with CypCut software:\u003c\/strong\u003e widely used industrial control stack, enabling intelligent nesting, lead-in\/lead-out optimization, micro-joints, common-line cutting, and full-sheet simulation for efficient high-mix work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady for production environments:\u003c\/strong\u003e full-sheet bed, enclosed design, and integrated utilities make this a practical core asset for contract manufacturing, OEM panel work, and job-shop production cells.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaycus or IPG 2 kW fiber source:\u003c\/strong\u003e choose based on your installed base, preferred service partners, and internal engineering standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003c!-- PERFORMANCE OVERVIEW --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--performance\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003ePerformance profile: 2 kW power · 5×10 ft reach\u003c\/h3\u003e\n\u003cp\u003eA 2 kW fiber laser on a 5×10 ft platform provides a \u003cstrong\u003eworkhorse combination\u003c\/strong\u003e for everyday flat-sheet work, handling typical gauges and part types found in general fabrication, machinery, and OEM panels.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__metrics-grid\"\u003e\n\u003cdiv class=\"umpro-product__metric\"\u003e\n\u003cp class=\"umpro-product__metric-label\"\u003eTypical material coverage*\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMild \/ carbon steel: typical gauges for brackets, guards, and panel work\u003c\/li\u003e\n\u003cli\u003eStainless steel: common thicknesses for covers, enclosures, and food\/medical components\u003c\/li\u003e\n\u003cli\u003eAluminum: light and mid-gauge alloys for panels, signage, and machine components\u003c\/li\u003e\n\u003cli\u003eBrass \/ copper alloys: application dependent and thickness limited, but supported in many use cases\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__metric-note\"\u003e*Actual ranges depend on grade, assist gas, cycle time expectations, and desired edge quality.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__metric\"\u003e\n\u003cp class=\"umpro-product__metric-label\"\u003eProductivity focus\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEfficient cutting of thin and mid-gauge sheets with moderate power consumption\u003c\/li\u003e\n\u003cli\u003eFull-sheet nesting to maximize material utilization on 5×10 stock\u003c\/li\u003e\n\u003cli\u003eMixed-part nests for high-mix, repeat work and kit-based jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__metric-note\"\u003eIdeal as a first production laser or as a dedicated full-sheet workhorse alongside higher-power systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__metric\"\u003e\n\u003cp class=\"umpro-product__metric-label\"\u003eQuality \u0026amp; repeatability*\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConsistent edges suitable for painting, powder coating, or welding prep\u003c\/li\u003e\n\u003cli\u003eReliable hole geometry and slot repeatability\u003c\/li\u003e\n\u003cli\u003eStable performance across recurring part families and long-term programs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__metric-note\"\u003e*Final tolerances should be validated on your parts, fixturing, and downstream processes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c!-- DETAILED TECHNICAL SPECIFICATIONS --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 2 kW enclosed fiber laser is supplied as a \u003cstrong\u003ecomplete cutting cell\u003c\/strong\u003e: fiber source, motion platform, auto-focus head, control, enclosure, extraction, and chiller are engineered and delivered together to create a ready-to-integrate station in your fabrication flow.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__specs-grid\"\u003e\n\u003c!-- LASER POWER --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eLaser power \u0026amp; source\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 2 kW fiber (Raycus or IPG options)\u003c\/p\u003e\n\u003cp\u003e2 kW provides a practical balance between cutting speed, thickness capability, and operating cost:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eWell suited to common gauges used in general fabrication and OEM panels\u003c\/li\u003e\n\u003cli\u003eModerate power draw and assist gas usage compared to high-power systems\u003c\/li\u003e\n\u003cli\u003eStable, predictable cutting behavior for day-to-day production\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoth Raycus and IPG sources are widely used in industry, with established reliability and support networks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- WORKING ENVELOPE --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eWorking envelope\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eBed size \/ stroke:\u003c\/strong\u003e 5×10 ft (60×120\") nominal working area\u003c\/p\u003e\n\u003cp\u003eThe 5×10 ft table is designed around US sheet formats, providing:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eFull-sheet nests that maximize material utilization\u003c\/li\u003e\n\u003cli\u003eCapacity for large panels, guards, and machine covers\u003c\/li\u003e\n\u003cli\u003eFlexibility for partial sheets, remnants, and blanks when required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe physical layout allows forklift or overhead crane loading according to your shop standards and safety practices.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- CONTROLLER \/ CAM --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eController \u0026amp; CAM \/ nesting\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eControl:\u003c\/strong\u003e FSCUT industrial motion and laser control\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSoftware:\u003c\/strong\u003e CypCut CAM \/ nesting\u003c\/p\u003e\n\u003cp\u003eFSCUT + CypCut provide a familiar and capable workflow for flat-sheet programming:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eDXF \/ DWG \/ STEP import from your CAD environment\u003c\/li\u003e\n\u003cli\u003eAutomatic and interactive nesting on full 5×10 sheets\u003c\/li\u003e\n\u003cli\u003eLead-in\/lead-out optimization and corner smoothing\u003c\/li\u003e\n\u003cli\u003eMicro joints, bridging, and tabbing to stabilize parts\u003c\/li\u003e\n\u003cli\u003ePath simulation and sequence control before cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe interface supports high-mix work and repeat jobs, and is widely adopted in modern fiber laser cells.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- CUTTING HEAD --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eCutting head \u0026amp; auto-focus\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Auto-focus fiber cutting head with capacitive height sensing\u003c\/p\u003e\n\u003cp\u003eThe auto-focus system and height control:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eTrack sheet warp and camber across the 5×10 ft area\u003c\/li\u003e\n\u003cli\u003eAdjust focus for different thicknesses and materials\u003c\/li\u003e\n\u003cli\u003eMaintain consistent kerf and edge quality over the full sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eParameter presets link focus height, speed, and gas pressure to your preferred settings by material and thickness, simplifying daily operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ENCLOSURE \/ SAFETY --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eEnclosure \u0026amp; safety\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 light-tight housing\u003c\/p\u003e\n\u003cp\u003eThe enclosure is designed to support typical US shop safety expectations:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eInterlocked doors and access panels to prevent cutting when open\u003c\/li\u003e\n\u003cli\u003eViewing windows for process monitoring without direct exposure\u003c\/li\u003e\n\u003cli\u003eIsolated cutting chamber to contain process light and sparks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis reduces the need for broad laser safety zoning around the machine and simplifies risk assessment for safety and facilities teams.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- UTILITIES \/ CHILLER \/ EXTRACTION --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eUtilities, chiller \u0026amp; fume extraction\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e integrated fume extraction and industrial chiller\u003c\/p\u003e\n\u003cp\u003eThe chiller provides stable cooling for:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eLaser source cooling circuit\u003c\/li\u003e\n\u003cli\u003eOptics and cutting head cooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe extraction system captures process smoke and particulates at the cutting zone and routes them to your plant exhaust or filtration, supporting cleaner shop air and protecting machine components.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ASSIST GASES --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eAssist gases \u0026amp; strategy\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eAssist gases:\u003c\/strong\u003e Nitrogen (N\u003csub\u003e2\u003c\/sub\u003e), Oxygen (O\u003csub\u003e2\u003c\/sub\u003e), and dry air (configuration dependent)\u003c\/p\u003e\n\u003cp\u003eCommon usage patterns include:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOxygen:\u003c\/strong\u003e general-purpose cutting on mild steel with oxidized edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNitrogen:\u003c\/strong\u003e bright, oxide-free edges on stainless and aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry air:\u003c\/strong\u003e cost-effective cutting where a light oxide color is acceptable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe can advise on gas storage, regulation, and distribution based on your duty cycle and primary materials.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- MOTION SYSTEM --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eMotion system \u0026amp; structure\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eMotion:\u003c\/strong\u003e servo-driven gantry with precision linear guidance\u003c\/p\u003e\n\u003cp\u003eThe motion platform is built for:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eSmooth motion and interpolation at typical cutting speeds\u003c\/li\u003e\n\u003cli\u003eAccurate positioning across the entire 5×10 ft table\u003c\/li\u003e\n\u003cli\u003eConsistent hole and feature geometry for recurring parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMechanical stiffness and servo control help maintain cut quality during extended production shifts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ELECTRICAL \/ FOOTPRINT --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eElectrical \u0026amp; footprint (high level)\u003c\/h4\u003e\n\u003cp\u003eDetailed electrical and footprint drawings are provided during specification. In general, the machine is intended to fit into:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eTypical US industrial 3-phase power environments\u003c\/li\u003e\n\u003cli\u003eFabrication bays, laser rooms, or integrated production cells\u003c\/li\u003e\n\u003cli\u003eRigging and floor layouts using standard material-handling methods\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAccess paths, overhead clearances, and anchoring are reviewed in advance as part of the pre-installation process.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"umpro-product__note\"\u003e\u003cem\u003e Cutting capacity, achievable tolerances, and throughput depend on material grade, assist gas, nesting strategy, process parameters, and edge-quality expectations. For critical jobs, we recommend validating with sample parts and confirmed cut parameters before locking in production tolerances. \u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- APPLICATIONS \/ USE CASES --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n\u003cp\u003eThe 2 kW, 5×10 ft Umprotech enclosed fiber laser is often deployed as a \u003cstrong\u003eprimary flat-sheet cutting asset\u003c\/strong\u003e for general fabrication or as a dedicated cell feeding press brakes, saws, hardware insertion, and welding. It is well-suited to both high-mix work and recurring production.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__usecases-grid\"\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eFlat part production\u003c\/h4\u003e\n\u003cp\u003ePanels, brackets, base plates, support plates, and machine guards for general fabrication and OEM machinery. Full 5×10 nests allow kits and assemblies to be cut from a single sheet where practical.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eEnclosures \u0026amp; panels\u003c\/h4\u003e\n\u003cp\u003eFlat patterns for electrical enclosures, HVAC cabinets, junction boxes, and machine covers. Accurate features support efficient press-brake forming and consistent assembly fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eHVAC \u0026amp; building hardware\u003c\/h4\u003e\n\u003cp\u003eDuct components, access panels, mounting brackets, and support hardware where repeatable geometry and clean edges help reduce field rework and installation time.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eSignage \u0026amp; decorative work\u003c\/h4\u003e\n\u003cp\u003eLettering, logo plates, and decorative cut-outs in steel, stainless, and aluminum, with edges suitable for brushing, powder coating, or architectural finishes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eMachine guards \u0026amp; safety components\u003c\/h4\u003e\n\u003cp\u003eGuards, screens, and covers requiring consistent hole patterns and smooth edges to meet safety and ergonomic expectations around machinery and production lines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eHigh-mix \/ low-volume production\u003c\/h4\u003e\n\u003cp\u003eContract manufacturing and job-shop work where many part numbers share the same machine, and CypCut nesting helps keep setups and changeovers efficient across shifts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003ePrototype and repeat orders\u003c\/h4\u003e\n\u003cp\u003ePrototyping of new parts followed by recurring production using the same nests and parameter sets, supporting a smooth transition from engineering trials to regular shipments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eOEM panels \u0026amp; kits\u003c\/h4\u003e\n\u003cp\u003eOEMs can standardize panel, bracket, and kit layouts on 5×10 sheets, storing nests and parameter sets for each product family to ensure consistent performance over the life of the program.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eIn many shops, the 2 kW 5×10 machine serves as a \u003cstrong\u003egeneral-purpose workhorse\u003c\/strong\u003e—handling day-to-day jobs and repeat programs—while leaving higher-power or specialized equipment available for very thick materials or specialized processes.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- CONFIGURATIONS \u0026 OPTIONS --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 2 kW 5×10 enclosed fiber laser is offered as a \u003cstrong\u003eready-to-run system\u003c\/strong\u003e. Core elements—fiber source, auto-focus head, FSCUT control, enclosure, extraction, and chiller—are standard. Configuration choices allow the machine to be aligned with your material strategy and plant standards.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber source options:\u003c\/strong\u003e 2 kW Raycus or 2 kW IPG. Choose based on your installed base, service preferences, or internal equipment standards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssist gas configuration:\u003c\/strong\u003e support for nitrogen, oxygen, and dry air (configuration dependent). We can assist in selecting regulators, storage, and line sizes based on your thickness range and expected duty cycle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl stack:\u003c\/strong\u003e FSCUT controller with CypCut CAM \/ nesting as standard—no separate basic CAM purchase needed for 2D flat-sheet programming, nesting, and simulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e supplied as standard, with parameter libraries organized by material and thickness to simplify day-to-day use across multiple operators.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-cover enclosure \u0026amp; extraction:\u003c\/strong\u003e included to simplify safety approvals and to provide a clean, contained cutting environment on the shop floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial chiller:\u003c\/strong\u003e included and sized appropriately for 2 kW duty, supporting stable thermal conditions for the laser source and optics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork \u0026amp; workflow integration:\u003c\/strong\u003e support for typical network connections and file transfer, allowing nests and programs to be pulled from shared folders or integrated with existing CAD\/ERP workflows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuture automation readiness:\u003c\/strong\u003e table layout amenable to later integration of simple material carts or loading concepts, should you wish to automate material handling in the future.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003c!-- IMPLEMENTATION \u0026 SUPPORT --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n\u003cp\u003eWe work closely with US job shops, OEMs, and system integrators to ensure that the 2 kW 5×10 enclosed fiber laser is \u003cstrong\u003especified, installed, and supported\u003c\/strong\u003e around real parts and real workflows—not just catalog data. The focus is on predictable uptime, clear ROI, and smooth adoption on the shop floor.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-installation review:\u003c\/strong\u003e assessment of power, floor space, exhaust routing, gas supply, rigging, and access paths. This planning reduces surprises at installation and shortens the time to first production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart \u0026amp; material review:\u003c\/strong\u003e you can share representative DXF\/STEP\/PDF files and thickness ranges. We help confirm that a 2 kW, 5×10 configuration is appropriate for your material mix and performance targets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCypCut workflow setup:\u003c\/strong\u003e assistance with nesting defaults, layer conventions, micro-joint strategies, and parameter libraries aligned with your part families and priorities.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator \u0026amp; maintenance training:\u003c\/strong\u003e onsite or remote training that covers safe operation, startup \/ shutdown procedures, routine checks, basic troubleshooting, and maintenance best practices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOngoing process support:\u003c\/strong\u003e help with new materials, cut-quality tuning, and cycle-time optimization as more jobs are moved onto the 2 kW cell.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__cta\"\u003e\u003cstrong\u003eNext step:\u003c\/strong\u003e send us representative part files (DXF\/STEP\/PDF) and your material specifications. We’ll confirm fit, estimate cycle times, and recommend an appropriate 2 kW 5×10 configuration and gas strategy for your workflow and production goals.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- TECHNICAL FAQ --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--faq umpro-product-faq\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eTechnical FAQ – 2 kW · 5×10 ft enclosed fiber laser\u003c\/h3\u003e\n\u003cdiv class=\"umpro-product-faq__grid\"\u003e\n\u003c!-- FAQ ITEM 1 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhat material thickness range is realistic for a 2 kW, 5×10 fiber laser?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eA 2 kW fiber laser is typically used for \u003cstrong\u003ethin and mid-gauge\u003c\/strong\u003e material in job-shop and OEM applications. While exact limits depend on material grade, assist gas, and edge-quality expectations, 2 kW generally covers:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eCommon gauges for brackets, panels, and guards in mild steel\u003c\/li\u003e\n\u003cli\u003eTypical thicknesses for stainless covers and enclosures\u003c\/li\u003e\n\u003cli\u003eLight to mid-gauge aluminum plates and panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVery thick plate can be cut within certain windows but may involve slower speeds or different expectations for edge quality. We recommend validating your critical jobs with sample cuts and agreed parameter sets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM 2 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow does a 2 kW system compare to higher-power lasers (e.g. 3 kW, 6 kW) for everyday work?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eFor many shops, 2 kW is a \u003cstrong\u003esweet spot for everyday work\u003c\/strong\u003e in thin and mid-gauge material:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eLower initial investment compared to higher-power systems\u003c\/li\u003e\n\u003cli\u003eModerate electrical and gas consumption\u003c\/li\u003e\n\u003cli\u003eAdequate speed for common gauges used in panels, brackets, and guards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHigher-power systems offer advantages on thicker plate and very high-speed thin-gauge cutting, but for many general-fabrication and OEM panel applications, 2 kW provides a strong balance of cost and capability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM 3 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhy choose a 5×10 ft bed instead of a 4×8 ft machine?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eA 5×10 ft (60×120\") bed offers more nesting area and aligns with another common US sheet format:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eMore parts per sheet on many nests compared to 4×8\u003c\/li\u003e\n\u003cli\u003eFlexibility to handle larger panels and guards\u003c\/li\u003e\n\u003cli\u003ePotential to reduce skeletons and offcuts on certain part families\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf your supply chain and part sizes already favor 5×10 material, this format may improve utilization and reduce handling compared to smaller beds.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM 4 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eIs CypCut sufficient, or do we need additional CAM software?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eFor flat-sheet laser work, \u003cstrong\u003eCypCut is typically the primary programming and nesting environment\u003c\/strong\u003e. It supports:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eDXF \/ DWG \/ STEP import\u003c\/li\u003e\n\u003cli\u003eNesting, lead-ins, micro joints, and sequence control\u003c\/li\u003e\n\u003cli\u003eSimulation and program verification before cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSome facilities also use higher-level CAM or ERP systems for quoting, routing, or scheduling, but day-to-day cutting usually flows through CypCut on the FSCUT controller.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM 5 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhat is the learning curve for operators on FSCUT + CypCut?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eOperators with basic CNC or CAD experience generally become productive quickly. Training focuses on:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eSafe startup \/ shutdown and daily checks\u003c\/li\u003e\n\u003cli\u003eLoading nests and adjusting cut sequences when needed\u003c\/li\u003e\n\u003cli\u003eSelecting appropriate parameter sets for materials and thicknesses\u003c\/li\u003e\n\u003cli\u003eBasic troubleshooting and response to alarms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eParameter libraries, clear nesting visuals, and simulation tools reduce guesswork and help standardize performance between shifts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM 6 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhat utilities and floor-space considerations are required before installation?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eBefore installation we provide a detailed checklist. In general you should plan for:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eAppropriate 3-phase power with specified voltage and amperage\u003c\/li\u003e\n\u003cli\u003eAssist gas storage and regulation suitable for your duty cycle\u003c\/li\u003e\n\u003cli\u003eExhaust or filtration connections for the fume extraction\u003c\/li\u003e\n\u003cli\u003eClear floor space, access paths, and rigging routes for the 5×10 cell\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eReviewing these items early helps ensure that installation and commissioning focus on bringing your parts into production, not on last-minute infrastructure changes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM 7 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow often do nozzles, lenses, and protective windows need service or replacement?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eWear items are treated as consumables and their life depends on:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eMaterial type and thickness\u003c\/li\u003e\n\u003cli\u003eAssist gas quality and cleanliness\u003c\/li\u003e\n\u003cli\u003eCut parameters and overall duty cycle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRegular inspection and cleaning, along with adherence to maintenance schedules, keeps performance stable and minimizes unplanned downtime. We provide recommended intervals and procedures as part of the documentation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM 8 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow does the fully enclosed Class 1 design affect daily workflow?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eIn practice, the fully enclosed Class 1 design means:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eOperators load and unload through defined doors or access points\u003c\/li\u003e\n\u003cli\u003eCutting occurs in a light-tight chamber, reducing exposure to bright process light\u003c\/li\u003e\n\u003cli\u003eInterlocks prevent cutting when doors are open, simplifying safety procedures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis design typically simplifies risk assessments and allows placement of the cell in busier fabrication areas without extensive laser safety zoning around the machine.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM 9 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eCan we integrate the 2 kW 5×10 cell into our existing CAD\/ERP workflow?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eYes. Typical integrations look like:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eModels and drawings created in your CAD system\u003c\/li\u003e\n\u003cli\u003eFlat patterns exported as DXF\/DWG or STEP\u003c\/li\u003e\n\u003cli\u003eFiles passed to CypCut via network shares or defined folders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe can help define a simple, robust file flow that ties engineering, scheduling, and the laser cell together without adding unnecessary complexity.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ ITEM 10 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow can we tell if a 2 kW 5×10 configuration is the right fit for our shop?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eThe best approach is to examine your actual parts and material mix. We typically:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eReview a cross-section of your parts (DXF\/STEP\/PDF)\u003c\/li\u003e\n\u003cli\u003eLook at thickness distributions, yearly volumes, and desired lead times\u003c\/li\u003e\n\u003cli\u003eEstimate representative cycle times on a 2 kW platform and compare to alternatives\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFrom there, we can confirm whether a 2 kW 5×10 system will cover your main workload, or if a different power level or table format would better support your growth and throughput targets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c\/div\u003e\n\u003cp class=\"umpro-product-faq__closing\"\u003e\u003cstrong\u003eStill have technical questions?\u003c\/strong\u003e Share your part drawings, materials, and expected quantities. We’ll provide a targeted assessment and configuration recommendation for your 2 kW 5×10 fiber laser cell.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966014550382,"sku":"UFL-5x10-2KW-ENC","price":109900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-12kw-enclosed-fiber-laser-cutter-6x20ft-fscut-5723155.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-3kw-5x10ft","title":"UmproTech 3kW Enclosed Fiber Laser Cutter – 5 x 10 ft FSCUT","description":"\u003ch2\u003e3kW Enclosed 5 x 10 ft Fiber Laser Cutter for U.S. Fabrication Shops\u003c\/h2\u003e\u003cp\u003eThe UmproTech 3kW enclosed fiber laser cutter is built for U.S. fabrication shops, job shops, manufacturers, sign shops, HVAC contractors, and metalworking businesses that need full-sheet cutting capacity with a more contained machine layout than an open-table laser.\u003c\/p\u003e\u003cp\u003eThis 5 x 10 ft enclosed fiber laser is positioned for shops cutting steel, stainless steel, aluminum, panels, brackets, covers, signs, cabinets, production blanks, and general sheet metal parts where cutting quality, workflow, and operator environment matter.\u003c\/p\u003e\u003ch3\u003eBest Fit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eU.S. shops needing enclosed 5 x 10 ft sheet cutting capacity\u003c\/li\u003e\n\u003cli\u003eFabrication shops upgrading from plasma, outsourcing, older CO2 systems, or open cutting systems\u003c\/li\u003e\n\u003cli\u003eManufacturers cutting steel, stainless, aluminum, and repeat production parts\u003c\/li\u003e\n\u003cli\u003eBuyers comparing 1500W, 3kW, and 6kW fiber laser options\u003c\/li\u003e\n\u003cli\u003eShops that want a stronger production step than entry-level 1500W systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy Choose 3kW Enclosed\u003c\/h3\u003e\u003cp\u003eA 3kW enclosed fiber laser can be a practical middle point for buyers who want stronger cutting capability than a 1500W system while keeping budget and shop requirements more controlled than higher-power production machines. The enclosed layout can also support a more professional cutting cell and improved workflow planning.\u003c\/p\u003e\u003ch3\u003eWhen to Choose More Power\u003c\/h3\u003e\u003cp\u003eIf your shop regularly cuts thicker material, needs faster cycle times, runs multiple shifts, or wants more capacity for demanding stainless or aluminum work, a 6kW or higher-power system may be a better recommendation. If your work is mostly thin sheet and budget-sensitive, a 1500W system may be enough.\u003c\/p\u003e\u003ch3\u003eQuote Checklist\u003c\/h3\u003e\u003cp\u003eFor the most accurate delivered quote, send these details:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial type: mild steel, stainless, aluminum, galvanized, or mixed work\u003c\/li\u003e\n\u003cli\u003eMaximum thickness and most common daily thickness\u003c\/li\u003e\n\u003cli\u003eSheet size, part size, and production volume\u003c\/li\u003e\n\u003cli\u003eCurrent process: outsourcing, plasma, CO2, saw cutting, or existing fiber laser\u003c\/li\u003e\n\u003cli\u003eShop location and target delivery timeline\u003c\/li\u003e\n\u003cli\u003eWhether you need compressor, extraction, installation, training, support, or financing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAvailable Quote Add-Ons\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMachine configuration and final package review\u003c\/li\u003e\n\u003cli\u003eFreight and delivered-price estimate\u003c\/li\u003e\n\u003cli\u003eCompressor and shop-air recommendation\u003c\/li\u003e\n\u003cli\u003eExtraction, safety, and workflow planning\u003c\/li\u003e\n\u003cli\u003eStartup, installation, and operator training options\u003c\/li\u003e\n\u003cli\u003eWarranty, parts, and service support review\u003c\/li\u003e\n\u003cli\u003eFinancing options for qualified buyers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant Before Purchase\u003c\/h3\u003e\u003cp\u003eFinal stock, configuration, freight, taxes, accessories, installation requirements, training, and delivery timing must be confirmed before invoice. Product images and listed configuration may vary from the final quoted package.\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs 3kW a good choice for a first fiber laser?\u003c\/strong\u003e\u003cbr\u003eYes, for many shops that want more capability than an entry 1500W system while still keeping the package practical for general fabrication work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I choose enclosed or open type?\u003c\/strong\u003e\u003cbr\u003eAn enclosed machine may be better when workflow, operator environment, and a more contained cutting cell are important. Open systems may be more budget-focused.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I request a delivered quote?\u003c\/strong\u003e\u003cbr\u003eYes. The best quote includes your application, material thickness, delivery location, accessory needs, installation needs, and timeline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs financing available?\u003c\/strong\u003e\u003cbr\u003eFinancing may be available for qualified buyers. Include your budget range and timeline when requesting the quote.\u003c\/p\u003e","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966014583150,"sku":"UFL-5x10-3KW-ENC","price":119900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-12kw-enclosed-fiber-laser-cutter-6x20ft-fscut-5723155.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-6kw-5x10ft","title":"Umprotech Enclosed Fiber Laser Cutter 6kW 5x10ft FSCUT","description":"\u003csection class=\"umpro-product umpro-product--flagship\"\u003e\n  \u003c!-- HERO \/ OVERVIEW --\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003cp class=\"umpro-product__eyebrow\"\u003eEnclosed Fiber Laser Cutting Cell · High-Throughput 5×10 Platform\u003c\/p\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003e\n      Umprotech Enclosed Fiber Laser Cutter – 6 kW · 5×10 ft · FSCUT \/ CypCut\n    \u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003e\n      A fully enclosed \u003cstrong\u003e6 kW fiber laser cutting system\u003c\/strong\u003e on a standard\n      \u003cstrong\u003e5×10 ft (60×120\") bed\u003c\/strong\u003e, with FSCUT controller and CypCut CAM\/nesting. Built for US job shops,\n      OEMs, and fabrication cells that require \u003cstrong\u003ehigh throughput, operator safety, and consistent cut quality\u003c\/strong\u003e\n      on mixed-metal 5×10 sheets—without compromising on diagnostics, process control, or shop-floor usability.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__hero-grid\"\u003e\n      \u003cp class=\"umpro-product__hero-line\"\u003e\n        \u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber (Raycus \/ IPG) ·\n        \u003cstrong\u003eBed size:\u003c\/strong\u003e 5×10 ft (60×120\") ·\n        \u003cstrong\u003eController:\u003c\/strong\u003e FSCUT with CypCut CAM \/ nesting\n      \u003c\/p\u003e\n      \u003cp class=\"umpro-product__hero-line\"\u003e\n        \u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 ·\n        \u003cstrong\u003eHead:\u003c\/strong\u003e Auto-focus fiber cutting head ·\n        \u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e \/ O\u003csub\u003e2\u003c\/sub\u003e \/ air (configuration dependent)\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cul class=\"umpro-product__hero-points\"\u003e\n      \u003cli\u003e6 kW fiber power for fast cutting and robust process windows on 5×10 sheets\u003c\/li\u003e\n      \u003cli\u003eStandard 60×120\" bed for efficient nesting, stock handling, and kit-based workflows\u003c\/li\u003e\n      \u003cli\u003eFull-cover, Class 1 enclosure with integrated fume extraction and industrial chiller\u003c\/li\u003e\n      \u003cli\u003eFSCUT controller with CypCut for advanced nesting, simulation, and diagnostics\u003c\/li\u003e\n      \u003cli\u003eAuto-focus head and mixed-gas capability for multi-material production\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/header\u003e\n\n  \u003c!-- POSITIONING \/ VALUE FOR US BUYERS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 6 kW, 5×10 ft enclosed fiber laser is positioned as a\n      \u003cstrong\u003ehigh-throughput full-sheet production cell\u003c\/strong\u003e for US shops that want to combine the\n      \u003cstrong\u003ecutting speed and headroom of 6 kW power\u003c\/strong\u003e with the \u003cstrong\u003ematerial efficiency of standard 5×10 stock\u003c\/strong\u003e.\n      It’s built around a proven FSCUT\/CypCut stack and industrial-grade utilities for stable, repeatable performance.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003e6 kW fiber laser (Raycus \/ IPG):\u003c\/strong\u003e offers high linear speeds, strong piercing performance, and\n        robust cutting conditions on a range of thicknesses in stainless, carbon steel, aluminum, and brass. Ideal for\n        shops that routinely handle mid-thick and heavier gauges, not just thin sheet.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eStandard 5×10 ft (60×120\") bed:\u003c\/strong\u003e matches a common US sheet format, allowing you to use standard\n        stock, nesting larger parts or higher part counts per sheet. This improves material utilization and reduces\n        skeleton handling versus smaller platforms.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFull-cover, Class 1 enclosure:\u003c\/strong\u003e light-tight, interlocked housing that meets typical US safety\n        expectations. Operators can run the machine in busy production environments while containing process light and\n        fumes inside the cutting chamber.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegrated fume extraction \u0026amp; industrial chiller:\u003c\/strong\u003e included as standard, so you receive a\n        complete cutting cell rather than a bare cutting platform. Proper cooling and fume capture help protect optics,\n        electronics, and the broader shop environment.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e tracks thickness changes and sheet warp across the full 5×10 bed,\n        maintaining focus, kerf width, and edge consistency on mixed-gauge jobs, remnants, and non-perfect stock.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFSCUT controller with CypCut CAM:\u003c\/strong\u003e widely adopted industrial control environment with intelligent\n        nesting, toolpath optimization, micro-joints, corner smoothing, and simulation for predictable cycle times and\n        reduced scrap.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eMixed-metal production:\u003c\/strong\u003e with the right assist gas strategy, the cell supports day-to-day\n        switching between carbon steel, stainless, aluminum, and brass. CypCut libraries and process parameters help\n        standardize results across shifts.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegration-ready:\u003c\/strong\u003e designed to sit at the core of a fabrication cell, feeding press brakes,\n        panel benders, hardware insertion, and welding stations with 5×10-based nests and kits.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- PERFORMANCE OVERVIEW --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--performance\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003ePerformance: 6 kW power · 5×10 ft full-sheet capability\u003c\/h3\u003e\n    \u003cp\u003e\n      A \u003cstrong\u003e6 kW fiber source\u003c\/strong\u003e combined with a \u003cstrong\u003e5×10 ft bed\u003c\/strong\u003e provides a robust\n      performance envelope for job shops and OEM lines that need full-sheet processing with the speed to keep up with\n      downstream forming and welding capacity.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__metrics-grid\"\u003e\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eTypical material coverage*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eMild\/carbon steel: thin and mid-to-heavy gauges typical for frames, panels, and structural details\u003c\/li\u003e\n          \u003cli\u003eStainless steel: gauges used in enclosures, process equipment, and architectural components\u003c\/li\u003e\n          \u003cli\u003eAluminum: panels, covers, and frames across thin and mid-gauge ranges\u003c\/li\u003e\n          \u003cli\u003eBrass \/ copper alloys: within defined thickness windows for plates, tags, and decorative parts\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *Exact workable ranges depend on alloy, assist gas, and desired edge quality vs. speed.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eThroughput characteristics*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eSubstantial speed increase over 2–3 kW systems, especially on mid-thickness materials\u003c\/li\u003e\n          \u003cli\u003eFaster piercing and better performance on thicker sections\u003c\/li\u003e\n          \u003cli\u003eHigh part counts per 5×10 sheet when nesting is optimized for 6 kW parameters\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *We recommend cycle-time estimation using your actual nests, materials, and cut-quality targets.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eQuality \u0026amp; repeatability*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eEdges suitable for welding, painting, and powder coating with tuned parameters\u003c\/li\u003e\n          \u003cli\u003eConsistent feature geometry across full-sheet nests and repeat orders\u003c\/li\u003e\n          \u003cli\u003eStable performance over multiple shifts when maintenance and parameters are managed correctly\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *Final tolerances should be confirmed with sample parts and fixturing under your actual process conditions.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- DETAILED TECHNICAL SPECIFICATIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 6 kW 5×10 enclosed fiber laser is delivered as a \u003cstrong\u003eturnkey cutting cell\u003c\/strong\u003e. The fiber\n      source, motion platform, auto-focus head, control, enclosure, extraction, and chiller are configured to work\n      together as an integrated system once connected to your power, assist gas, and exhaust infrastructure.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n\n      \u003c!-- LASER SOURCE --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eLaser power \u0026amp; source\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber (Raycus or IPG options)\u003c\/p\u003e\n        \u003cp\u003e\n          6 kW provides:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eHigh-speed cutting across thin and mid-thickness ranges in steel, stainless, and aluminum\u003c\/li\u003e\n          \u003cli\u003eImproved cutting performance and pierce behavior on heavier gauges compared to 3 kW systems\u003c\/li\u003e\n          \u003cli\u003eStronger process windows for high-mix work where part geometry and thickness vary\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Raycus and IPG are established industrial fiber laser vendors, giving you access to proven power delivery and\n          service networks commonly used in production environments.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- WORKING ENVELOPE --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eWorking envelope\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eBed size \/ stroke:\u003c\/strong\u003e 5×10 ft (60×120\") nominal working area\u003c\/p\u003e\n        \u003cp\u003e\n          The 5×10 ft platform is optimized for:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eFull-sheet nesting for panels, brackets, and kits\u003c\/li\u003e\n          \u003cli\u003eLarge components that exceed 4×8 dimensions\u003c\/li\u003e\n          \u003cli\u003eEfficient material utilization with fewer offcuts and skeletons\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          The machine can also process partial sheets and remnants, while still benefiting from CypCut’s nesting and\n          path-optimization tools.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CONTROL \/ CAM --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eController \u0026amp; CAM \/ nesting\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eControl:\u003c\/strong\u003e FSCUT industrial motion and laser control\u003c\/p\u003e\n        \u003cp\u003e\u003cstrong\u003eSoftware:\u003c\/strong\u003e CypCut CAM \/ nesting suite\u003c\/p\u003e\n        \u003cp\u003e\n          Together, FSCUT and CypCut provide a complete flat-sheet programming environment:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eImport of DXF\/DWG\/STEP files from your CAD software\u003c\/li\u003e\n          \u003cli\u003eAutomatic and interactive nesting on full 5×10 sheets\u003c\/li\u003e\n          \u003cli\u003eLead-in\/lead-out strategies, micro joints, and corner smoothing\u003c\/li\u003e\n          \u003cli\u003eCommon-line cutting, bridging, and sequence control to reduce pierces and cycle time\u003c\/li\u003e\n          \u003cli\u003eSimulation and graphical path views for program verification before cutting\u003c\/li\u003e\n          \u003cli\u003eDiagnostic tools and alarms linked to motion, laser, and IO events\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          The control stack is widely used in industrial laser systems, making it easier to hire operators and find\n          external support when needed.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CUTTING HEAD --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eCutting head \u0026amp; auto-focus\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Auto-focus fiber cutting head with capacitive height sensing\u003c\/p\u003e\n        \u003cp\u003e\n          The auto-focus head:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eAutomatically adjusts focus for different material thicknesses and types\u003c\/li\u003e\n          \u003cli\u003eMaintains consistent stand-off over warped or imperfect 5×10 sheets\u003c\/li\u003e\n          \u003cli\u003eSupports stable kerf width, pierce quality, and edge appearance across the bed\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Parameter libraries tie focus position, gas pressures, and speeds to specific material\/thickness setups,\n          reducing operator guesswork and improving repeatability.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ENCLOSURE \/ SAFETY --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eEnclosure \u0026amp; safety\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 light-tight housing with interlocks\u003c\/p\u003e\n        \u003cp\u003e\n          The enclosure is engineered for shared production environments:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eInterlocked access doors that stop cutting when opened\u003c\/li\u003e\n          \u003cli\u003eViewing windows for monitoring without open-beam exposure\u003c\/li\u003e\n          \u003cli\u003eInternal lighting and clear access for loading, unloading, and cleaning\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          This design simplifies risk assessments and often reduces the need for broad “laser hazard zones” in the\n          surrounding shop area.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- UTILITIES \/ CHILLER \/ EXTRACTION --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eUtilities, chiller \u0026amp; fume extraction\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e industrial chiller and integrated fume extraction\u003c\/p\u003e\n        \u003cp\u003e\n          The chiller maintains stable temperatures for:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eLaser source cooling circuits\u003c\/li\u003e\n          \u003cli\u003eOptics and cutting head cooling\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          The extraction system captures smoke and particulates at the cutting area and routes them to your filtration\n          or exhaust system, helping keep optics cleaner and improving overall shop air quality.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ASSIST GASES --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eAssist gases \u0026amp; strategy\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eAssist gases:\u003c\/strong\u003e Nitrogen (N\u003csub\u003e2\u003c\/sub\u003e), Oxygen (O\u003csub\u003e2\u003c\/sub\u003e), and air (configuration dependent)\u003c\/p\u003e\n        \u003cp\u003eTypical usage patterns include:\u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003e\n\u003cstrong\u003eOxygen:\u003c\/strong\u003e high-speed cutting of mild steel with oxidized edges\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003eNitrogen:\u003c\/strong\u003e bright, oxide-free edges for stainless and aluminum\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003eDry air:\u003c\/strong\u003e cost-sensitive cutting where a light oxide tint is acceptable\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          We can recommend cylinder, bulk, or compressor-based solutions based on duty cycle, thickness ranges, and\n          required edge quality.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- MOTION SYSTEM --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eMotion system \u0026amp; structure\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eMotion:\u003c\/strong\u003e servo-driven gantry with precision linear guidance\u003c\/p\u003e\n        \u003cp\u003e\n          The motion platform is tuned for:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eSmooth motion on long 5×10 paths and fine features\u003c\/li\u003e\n          \u003cli\u003eAccurate feature positioning across the full working envelope\u003c\/li\u003e\n          \u003cli\u003eContinuous-duty performance in production environments\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Servo drives and mechanical stiffness help maintain cut quality over long runs and multiple shifts.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ELECTRICAL \/ FOOTPRINT --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eElectrical \u0026amp; footprint (high level)\u003c\/h4\u003e\n        \u003cp\u003e\n          Detailed connection, footprint, and loading data are provided during the specification phase. In general, the\n          system is designed for:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eStandard US 3-phase industrial power supplies\u003c\/li\u003e\n          \u003cli\u003eInstallation in fabrication bays, laser rooms, or integrated cells\u003c\/li\u003e\n          \u003cli\u003eRigging using typical material-handling and lift equipment\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Pre-installation planning covers access paths, clearances, and anchoring requirements to avoid surprises\n          during delivery and commissioning.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n    \u003c\/div\u003e\n\n    \u003cp class=\"umpro-product__note\"\u003e\n      \u003cem\u003e\n        Actual cutting capacity, tolerances, and throughput depend on material grade, assist gas, cut parameters, nesting\n        strategy, and quality targets. For critical parts, we recommend qualification via sample cutting and documented\n        parameter windows before committing final production tolerances.\n      \u003c\/em\u003e\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- APPLICATIONS \/ USE CASES --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003e\n      The 6 kW, 5×10 ft Umprotech enclosed fiber laser is frequently deployed as a\n      \u003cstrong\u003eprimary production laser\u003c\/strong\u003e in fabrication shops and OEM lines, or as a dedicated high-throughput\n      cell feeding downstream bending, welding, and assembly operations.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__usecases-grid\"\u003e\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eBrackets, frames \u0026amp; structural components\u003c\/h4\u003e\n        \u003cp\u003e\n          Brackets, gussets, supports, and frame elements in steel, stainless, and aluminum. High repeatability on hole\n          patterns and profiles supports efficient jigging, fixturing, and welding.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003ePanels, cabinets \u0026amp; machine guards\u003c\/h4\u003e\n        \u003cp\u003e\n          Large panels, guards, covers, and cabinet sides cut from full 5×10 sheets. Accurate features and bend lines\n          support consistent forming and alignment in assembly.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eOEM kits \u0026amp; assemblies\u003c\/h4\u003e\n        \u003cp\u003e\n          Kit-based nests for OEM assemblies, with parts organized on 5×10 sheets. Programs and parameter sets can be\n          stored in the control to standardize cycle times and quality across repeat orders.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eHVAC, ducting \u0026amp; building hardware\u003c\/h4\u003e\n        \u003cp\u003e\n          Duct panels, plenums, brackets, rails, and mounting hardware for HVAC and building systems, where full-sheet\n          nests and 6 kW speed help keep up with production demand.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eSignage \u0026amp; architectural elements\u003c\/h4\u003e\n        \u003cp\u003e\n          Letters, logos, perforated panels, and decorative elements cut in steel, stainless, and aluminum, with\n          parameter sets tuned for cosmetic finish and downstream surface treatments.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eContract manufacturing \u0026amp; job-shop work\u003c\/h4\u003e\n        \u003cp\u003e\n          High-mix, high-quality cutting for contract manufacturing, where the ability to handle different materials,\n          thicknesses, and geometries on 5×10 stock is essential for competitiveness.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003ePrototyping \u0026amp; pilot production\u003c\/h4\u003e\n        \u003cp\u003e\n          Pilot runs and prototypes produced on the same platform as steady-state production, reducing risk when moving\n          programs from engineering validation into regular job schedules.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eIntegration into automated lines\u003c\/h4\u003e\n        \u003cp\u003e\n          Positioned as the cutting front-end of a larger automated line, feeding robotic or semi-automated bending and\n          welding systems with predictable part quality and timing.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cp\u003e\n      In many facilities, the 6 kW 5×10 machine becomes the\n      \u003cstrong\u003e“throughput anchor”\u003c\/strong\u003e of the laser department—handling the bulk of sheet production while smaller\n      or specialty lasers focus on prototyping, thick plate, or niche materials.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- CONFIGURATIONS \u0026 OPTIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 6 kW 5×10 enclosed fiber laser is supplied as a\n      \u003cstrong\u003eready-to-run system\u003c\/strong\u003e. Core elements—fiber source, auto-focus head, FSCUT control, full enclosure,\n      extraction, and chiller—are standard. Configuration choices let you align the system with your material strategy,\n      gas infrastructure, and internal equipment standards.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFiber source options:\u003c\/strong\u003e 6 kW Raycus or 6 kW IPG. Select based on your installed base, preferred\n        service partners, or corporate standards for fiber lasers.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAssist gas configuration:\u003c\/strong\u003e support for N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, and air\n        (configuration dependent). We can help size regulators, piping, and storage for your duty cycle, thickness\n        range, and edge-quality requirements.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eControl stack:\u003c\/strong\u003e FSCUT controller with CypCut CAM\/nesting included as standard—no additional\n        flat-sheet CAM purchase required for core programming, nesting, and simulation.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e standard configuration, with parameter libraries pre-structured by\n        material and thickness to simplify daily use and training.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFull-cover enclosure \u0026amp; extraction:\u003c\/strong\u003e included to reduce engineering effort around guarding\n        and fume capture, and to support straightforward safety approvals.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIndustrial chiller:\u003c\/strong\u003e sized for 6 kW duty, providing stable thermal management for both the\n        laser source and optics under sustained production loads.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eNetwork \u0026amp; workflow integration:\u003c\/strong\u003e support for network-based file transfer and shared job\n        folders so that CAD\/ERP-driven workflows can connect into CypCut with minimal friction.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAutomation \u0026amp; integration options:\u003c\/strong\u003e for shops planning future automation, we can discuss\n        concepts such as load\/unload systems, material towers, or custom fixturing built around the 5×10 platform.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp\u003e\n      For special cases—unique materials, specific OEM standards, or custom cell layouts—our team can provide\n      application-driven configuration recommendations based on your part mix and production volume.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- IMPLEMENTATION \u0026 SUPPORT --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003e\n      We work closely with US job shops, OEMs, and integrators to ensure that the 6 kW 5×10 enclosed fiber laser is\n      \u003cstrong\u003especified, installed, and supported\u003c\/strong\u003e around real parts, real materials, and real workflows.\n      The objective is predictable uptime, not just impressive catalog numbers.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePre-installation planning:\u003c\/strong\u003e review of power capacity, floor space, rigging routes, exhaust\n        connections, and gas supply (N\u003csub\u003e2\u003c\/sub\u003e\/O\u003csub\u003e2\u003c\/sub\u003e\/air), with a focus on minimizing surprises and change\n        orders at installation.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePart \u0026amp; material review:\u003c\/strong\u003e analysis of representative parts, thickness distributions, and\n        expected volumes to confirm that a 6 kW 5×10 configuration is the right fit and to estimate cycle times.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eCypCut workflow setup:\u003c\/strong\u003e support for nesting rules, layer conventions, micro-joint strategies,\n        and parameter libraries, aligned with your preferred engineering and fabrication practices.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOperator \u0026amp; maintenance training:\u003c\/strong\u003e onsite or remote training covering safe operation,\n        startup\/shutdown, basic troubleshooting, and routine maintenance tasks for optics, nozzles, filters, and\n        mechanical components.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOngoing process support:\u003c\/strong\u003e assistance with new materials, cut-quality tuning, cycle-time\n        optimization, and integration questions as your job mix changes or volumes grow.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp class=\"umpro-product__cta\"\u003e\n      \u003cstrong\u003eNext step:\u003c\/strong\u003e send us representative part files (DXF\/STEP\/PDF), along with your material and\n      thickness ranges. We’ll confirm fit, estimate cycle times, and recommend a 6 kW 5×10 configuration and assist-gas\n      strategy aligned with your production goals and shop constraints.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- TECHNICAL FAQ --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--faq umpro-product-faq\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eTechnical FAQ – 6 kW · 5×10 ft enclosed fiber laser\u003c\/h3\u003e\n\n    \u003cdiv class=\"umpro-product-faq__grid\"\u003e\n\n      \u003c!-- FAQ 1 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How does a 6 kW 5×10 system compare to a 3 kW or 12 kW machine?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            A 6 kW 5×10 cell sits between mid-power and ultra-high-power solutions:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eSignificantly faster and more capable on thicker material than 3 kW systems\u003c\/li\u003e\n            \u003cli\u003eLower capital and operating cost than 10–12 kW full-sheet platforms\u003c\/li\u003e\n            \u003cli\u003eEnough headroom for mixed material and thickness ranges without oversizing utilities\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            For many US shops, 6 kW provides a strong balance between throughput, flexibility, and operating cost for\n            standard 5×10 sheet work.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 2 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What thickness range can we realistically process on a 6 kW 5×10 machine?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            6 kW provides a \u003cstrong\u003ebroad, practical window\u003c\/strong\u003e for thin, mid-gauge, and many heavier sections.\n            However, the exact range depends on:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eMaterial type (mild steel, high-strength steel, stainless, aluminum, brass)\u003c\/li\u003e\n            \u003cli\u003eAssist gas strategy (N\u003csub\u003e2\u003c\/sub\u003e vs O\u003csub\u003e2\u003c\/sub\u003e vs air) and available pressure\u003c\/li\u003e\n            \u003cli\u003eEdge-quality targets and downstream operations (welding, painting, finishing)\u003c\/li\u003e\n            \u003cli\u003eRequired cycle times and batch sizes\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We recommend validating key material\/thickness combinations via sample cuts and parameter tuning before\n            finalizing tolerance and throughput commitments.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 3 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Why choose a 5×10 ft bed instead of 4×8 or smaller-format platforms?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            A 5×10 bed is ideal when you want:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eHigher parts-per-sheet and better nesting flexibility compared to 4×8\u003c\/li\u003e\n            \u003cli\u003eCapacity for larger panels and guards that won’t fit on smaller tables\u003c\/li\u003e\n            \u003cli\u003eAlignment with a standard 5×10 supply chain that you already use\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            If you primarily run 60×120\" material or larger parts, the 5×10 format often reduces material waste and\n            skeleton handling versus smaller platforms.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 4 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Is CypCut sufficient for programming, or do we need a separate CAM system?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            For flat-sheet laser cutting, \u003cstrong\u003eCypCut is typically the primary CAM and nesting environment\u003c\/strong\u003e.\n            It provides:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eDXF\/DWG\/STEP import from your CAD tools\u003c\/li\u003e\n            \u003cli\u003eFull-sheet nesting, micro joints, lead-ins, and sequence control\u003c\/li\u003e\n            \u003cli\u003eSimulation and verification tools before cutting\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Many facilities still use external systems for quoting, scheduling, or ERP integration, but day-to-day\n            cutting programs on the 6 kW 5×10 machine are usually created and tuned in CypCut.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 5 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How difficult is it to train operators on FSCUT + CypCut for a 6 kW platform?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Operators with CNC, CAD, or fabrication experience typically adapt quickly. Training focuses on:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eSafe operation, including interlocks and daily safety checks\u003c\/li\u003e\n            \u003cli\u003eLoading nests, selecting materials, and managing parameter sets\u003c\/li\u003e\n            \u003cli\u003eResponding to alarms and interpreting diagnostic messages\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Parameter libraries, graphical nests, and simulation help flatten the learning curve and maintain\n            consistency between shifts.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 6 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What utilities and infrastructure are required before we install the machine?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Before shipment, you receive a detailed pre-install checklist. In general, you should plan for:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003e3-phase electrical service with appropriate voltage and amperage\u003c\/li\u003e\n            \u003cli\u003eAssist gas storage and regulation sized for your duty cycle and gas strategy\u003c\/li\u003e\n            \u003cli\u003eExhaust or filtration hookups for the integrated fume extraction system\u003c\/li\u003e\n            \u003cli\u003eFloor space, rigging paths, and height clearances suitable for a 5×10 enclosed cell\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Addressing these items early allows installation and commissioning to focus on bringing your jobs into\n            production rather than handling last-minute facility changes.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 7 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What does routine maintenance look like on a 6 kW 5×10 fiber laser cell?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Routine maintenance is centered around optics, gas systems, and mechanical checks. Typical tasks include:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eInspecting and cleaning\/replacing cutting nozzles and protective windows\u003c\/li\u003e\n            \u003cli\u003eChecking assist gas filters, hoses, and fittings for leaks or restrictions\u003c\/li\u003e\n            \u003cli\u003eMonitoring chiller fluid levels, temperature setpoints, and alarms\u003c\/li\u003e\n            \u003cli\u003eCleaning the cutting area and visually inspecting the motion system\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We provide maintenance schedules and procedures, and training includes how to safely perform these tasks on\n            a 6 kW platform.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 8 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How does the fully enclosed Class 1 design impact our safety program and layout?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            A fully enclosed Class 1 system simplifies many aspects of laser safety:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eThe laser beam is contained during normal operation; cutting stops when doors are open\u003c\/li\u003e\n            \u003cli\u003eHazard zones can be more compact and clearly defined around the enclosure\u003c\/li\u003e\n            \u003cli\u003eOperators usually don’t require broad-area laser eyewear in the surrounding area\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            This often makes it easier to place the machine in mixed-production environments near forming, welding,\n            and assembly equipment.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 9 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Can the 6 kW 5×10 cell integrate with our existing CAD\/ERP workflow?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Yes. Most integrations follow a straightforward pattern:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eEngineering manages geometry and part data in your existing CAD system\u003c\/li\u003e\n            \u003cli\u003eFlat patterns are exported as DXF\/DWG\/STEP tied to part numbers in ERP\/MRP\u003c\/li\u003e\n            \u003cli\u003eCypCut imports these files for nesting, parameter assignment, and simulation\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We can help define shared folders, naming conventions, and job-release steps so that planning, engineering,\n            and the laser cell stay aligned.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 10 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How do we determine if a 6 kW 5×10 configuration is the right fit for our operation?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            The best approach is to evaluate your real work rather than generic charts. Typically we:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eReview representative part drawings, materials, and thickness distributions\u003c\/li\u003e\n            \u003cli\u003eAnalyze yearly volumes and job-mix (high-mix vs. long-run, thin vs. thick)\u003c\/li\u003e\n            \u003cli\u003eEstimate cycle times and utilization on a 6 kW 5×10 platform using your nests\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            From there, we can compare this configuration to alternatives—such as 3 kW or 12 kW, or different table\n            sizes—and recommend a setup aligned with your constraints, growth plans, and return-on-investment targets.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n    \u003c\/div\u003e\n\n    \u003cp class=\"umpro-product-faq__closing\"\u003e\n      \u003cstrong\u003eStill have technical questions?\u003c\/strong\u003e Share your part drawings, material grades, and expected quantities.\n      We’ll provide a targeted assessment and configuration recommendation for your 6 kW 5×10 enclosed fiber laser cell.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e\n","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966015107438,"sku":"UFL-5x10-6KW-ENC","price":159900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-12kw-enclosed-fiber-laser-cutter-6x20ft-fscut-5723155.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-12kw-5x10ft","title":"Umprotech 12kW Enclosed Fiber Laser Cutter, 5x10ft, FSCUT","description":"\u003csection class=\"umpro-product umpro-product--flagship\"\u003e\u003c!-- HERO \/ OVERVIEW --\u003e\u003cheader class=\"umpro-product__hero\"\u003e\n\u003cp class=\"umpro-product__eyebrow\"\u003eEnclosed Fiber Laser Cutting Cell · Ultra High-Power 5×10 Platform\u003c\/p\u003e\n\u003ch2 class=\"umpro-product__title\"\u003eUmprotech Enclosed Fiber Laser Cutter – 12 kW · 5×10 ft · FSCUT \/ CypCut\u003c\/h2\u003e\n\u003cp class=\"umpro-product__subtitle\"\u003eA fully enclosed \u003cstrong\u003e12 kW fiber laser cutting system\u003c\/strong\u003e with a standard \u003cstrong\u003e5×10 ft (60×120\") bed\u003c\/strong\u003e and FSCUT controller with CypCut CAM\/nesting. Built for US job shops, OEMs, and contract manufacturers that need \u003cstrong\u003every high cutting speed, thick-plate capability, and repeatable quality\u003c\/strong\u003e on standard US sheet formats—while maintaining Class 1 safety, robust diagnostics, and a production-ready control stack.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__hero-grid\"\u003e\n\u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eLaser Power:\u003c\/strong\u003e 12 kW fiber (Raycus \/ IPG) · \u003cstrong\u003eBed Size:\u003c\/strong\u003e 5×10 ft (60×120\") · \u003cstrong\u003eController:\u003c\/strong\u003e FSCUT with CypCut CAM \/ nesting\u003c\/p\u003e\n\u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 · \u003cstrong\u003eHead:\u003c\/strong\u003e Auto-focus fiber cutting head · \u003cstrong\u003eAssist Gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e \/ O\u003csub\u003e2\u003c\/sub\u003e \/ air (configuration dependent)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"umpro-product__hero-points\"\u003e\n\u003cli\u003e12 kW fiber power for aggressive cutting on thin, mid, and thick sections\u003c\/li\u003e\n\u003cli\u003eFull 5×10 ft working area matched to standard US sheet stock\u003c\/li\u003e\n\u003cli\u003eClass 1 fully enclosed system with integrated fume extraction and industrial chiller\u003c\/li\u003e\n\u003cli\u003eFSCUT controller with CypCut for nesting, simulation, and process diagnostics\u003c\/li\u003e\n\u003cli\u003eIdeal for high-throughput cells, heavy fabrication, and demanding OEM applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/header\u003e\u003c!-- POSITIONING \/ VALUE FOR US BUYERS --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 12 kW, 5×10 ft enclosed fiber laser is designed as a \u003cstrong\u003eflagship production platform\u003c\/strong\u003e for US shops that want to combine \u003cstrong\u003eultra high cutting speed, robust thick-plate capability, and full-sheet 5×10 utilization\u003c\/strong\u003e in a single cell. It is aimed at facilities where laser cutting is a primary throughput constraint and where small gains in cycle time translate directly into capacity and margin.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 kW fiber laser power (Raycus \/ IPG):\u003c\/strong\u003e supports very high-speed cutting on thin and mid-gauge materials and extends into demanding thick-plate applications in mild steel, stainless, and aluminum. The additional headroom over 6 kW\/8 kW systems provides stronger process windows and shorter cycle times when properly parameterized.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull 5×10 ft (60×120\") bed size:\u003c\/strong\u003e matches standard US sheet dimensions used across heavy fabrication, machinery, and OEM panel work. Enables high part density, kit-based nests, and large panels without cropping, re-positioning, or multiple setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass 1 full-cover enclosure:\u003c\/strong\u003e light-tight, interlocked housing that confines the beam, process light, and a significant portion of fume to the cutting area. Supports safety audits and simplifies laser zoning in busy production environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFSCUT controller with CypCut CAM:\u003c\/strong\u003e an industry-standard control stack providing intelligent nesting, micro-joints, common-line cutting, and advanced toolpath control. Simulation and diagnostic tools help reduce scrap and unplanned downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e adapts to varying gauges, plate flatness, and material types, maintaining consistent focus and kerf geometry across full 5×10 sheets—including thick plate and high-energy cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated fume extraction \u0026amp; industrial chiller:\u003c\/strong\u003e supplied as part of the system, helping stabilize laser performance and shop air quality during continuous multi-shift operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixed-alloy and high-mix production:\u003c\/strong\u003e suitable for carbon steel, stainless, aluminum, and brass within the 12 kW process envelope, with assist gas strategies tuned for speed, edge quality, and cost.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-throughput production cell:\u003c\/strong\u003e ideal as the primary cutting asset feeding press brakes, panel benders, robotic welding, and assembly lines, where laser output directly governs the flow of parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003c!-- PERFORMANCE OVERVIEW --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--performance\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003ePerformance: 12 kW power · 5×10 ft full-sheet capacity\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003e12 kW fiber source\u003c\/strong\u003e on a \u003cstrong\u003e5×10 ft bed\u003c\/strong\u003e is engineered for shops where laser cutting is not just a support process, but a core production bottleneck. The power level and platform size together support aggressive throughput targets, especially when coupled with optimized nesting, assist gas, and downstream flow.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__metrics-grid\"\u003e\n\u003cdiv class=\"umpro-product__metric\"\u003e\n\u003cp class=\"umpro-product__metric-label\"\u003eTypical material coverage*\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon\/mild steel: from thin sheet into demanding thick sections (application dependent)\u003c\/li\u003e\n\u003cli\u003eStainless: thin, mid, and selected heavy gauges used in process, food, architectural, and OEM work\u003c\/li\u003e\n\u003cli\u003eAluminum: thin-to-thick plate within the process envelope, tuned for edge quality and productivity\u003c\/li\u003e\n\u003cli\u003eBrass \/ copper alloys: within defined thickness ranges and process windows\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__metric-note\"\u003e*Practical thickness limits and speeds depend on alloy, assist gas, nozzle, and quality\/performance tradeoffs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__metric\"\u003e\n\u003cp class=\"umpro-product__metric-label\"\u003eThroughput characteristics*\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSubstantial speed gains over 3–6 kW platforms on many gauges\u003c\/li\u003e\n\u003cli\u003eShorter pierce times and more robust cut-through behavior on thick plate\u003c\/li\u003e\n\u003cli\u003eHigh part counts per sheet when nests are tuned for 12 kW cutting parameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__metric-note\"\u003e*Best evaluated using your own nests, materials, and cycle-time targets under realistic gas\/infrastructure conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__metric\"\u003e\n\u003cp class=\"umpro-product__metric-label\"\u003eQuality \u0026amp; repeatability*\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEdge quality suitable for welding, machining, or coating with optimized parameters\u003c\/li\u003e\n\u003cli\u003eConsistent feature geometry across full-sheet nests and repeat batches\u003c\/li\u003e\n\u003cli\u003eCapability to standardize results across shifts via parameter libraries and diagnostics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__metric-note\"\u003e*Final tolerances and finish should be confirmed via sample cutting on your fixtures and edge-quality targets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c!-- DETAILED TECHNICAL SPECIFICATIONS --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 12 kW 5×10 enclosed fiber laser is supplied as a \u003cstrong\u003efully integrated cutting cell\u003c\/strong\u003e: fiber source, motion, auto-focus head, enclosure, extraction, chiller, and FSCUT control are all pre-engineered to work together when installed to specification.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__specs-grid\"\u003e\n\u003c!-- LASER SOURCE --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eLaser power \u0026amp; source\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 12 kW fiber (Raycus or IPG)\u003c\/p\u003e\n\u003cp\u003e12 kW is an \u003cstrong\u003eultra high-power\u003c\/strong\u003e configuration for facilities that:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eRoutinely cut thicker material where lower power levels limit productivity\u003c\/li\u003e\n\u003cli\u003eNeed aggressive cycle times on mid-gauge sheets to feed downstream equipment\u003c\/li\u003e\n\u003cli\u003eWant wider process windows and more forgiving cut conditions on challenging parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoth Raycus and IPG are established industrial fiber suppliers, offering stable output, recognized service networks, and integration into production environments worldwide.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- WORKING ENVELOPE --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eWorking envelope\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eBed size \/ stroke:\u003c\/strong\u003e 5×10 ft (60×120\") nominal working area\u003c\/p\u003e\n\u003cp\u003eThe 5×10 format allows you to:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eRun full-size US sheets without cropping or repositioning\u003c\/li\u003e\n\u003cli\u003eCombine large parts and smaller details in the same nest\u003c\/li\u003e\n\u003cli\u003eIncrease parts-per-sheet and reduce skeletons versus 4×8 platforms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe system can also utilize partial sheets and remnants; CypCut nesting tools help optimize usage of both full stock and offcuts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- CONTROLLER \/ CAM --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eController \u0026amp; CAM \/ nesting\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eControl:\u003c\/strong\u003e FSCUT industrial motion and laser control\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSoftware:\u003c\/strong\u003e CypCut CAM \/ nesting suite\u003c\/p\u003e\n\u003cp\u003eFSCUT + CypCut provide a complete 2D programming environment tuned for high-power fiber lasers:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eDXF\/DWG\/STEP import from your CAD software\u003c\/li\u003e\n\u003cli\u003eAutomatic and interactive nesting on 5×10 stock and remnants\u003c\/li\u003e\n\u003cli\u003eLead-in\/lead-out optimization, micro joints, common-line cutting, and bridging\u003c\/li\u003e\n\u003cli\u003eCorner smoothing, slowdown rules, and sequence control for edge quality and accuracy\u003c\/li\u003e\n\u003cli\u003eSimulation of toolpaths and pierces before launching production\u003c\/li\u003e\n\u003cli\u003eDiagnostic screens linked to I\/O, motion, and laser alarms for troubleshooting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe control environment is widely used in production lasers, supporting long-term maintainability and operator familiarity.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- CUTTING HEAD --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eCutting head \u0026amp; auto-focus\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Auto-focus fiber cutting head with capacitive height sensing\u003c\/p\u003e\n\u003cp\u003eOn a 12 kW platform, the cutting head is a critical component. The auto-focus design:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eAutomatically adjusts focal position for material thickness and type\u003c\/li\u003e\n\u003cli\u003eMaintains stand-off and stable coupling even on warped or cambered plates\u003c\/li\u003e\n\u003cli\u003eSupports process windows where edge quality and speed must be balanced carefully\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eParameter libraries link focus, gas pressure, and feedrate to each material\/thickness setup, reducing trial-and-error and helping protect optics from misuse.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ENCLOSURE \/ SAFETY --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eEnclosure \u0026amp; safety\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 light-tight housing with interlocks\u003c\/p\u003e\n\u003cp\u003eThe enclosure is engineered to support high-power operation in mixed-use shops:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eInterlocked doors stop cutting when opened or improperly secured\u003c\/li\u003e\n\u003cli\u003eViewing windows allow visual confirmation of cutting and pierces\u003c\/li\u003e\n\u003cli\u003eInternal lighting and clear access for loading, unloading, and cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis design simplifies safety reviews and typically reduces the need for large open-beam exclusion zones around the machine.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- UTILITIES \/ CHILLER \/ EXTRACTION --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eUtilities, chiller \u0026amp; fume extraction\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e industrial chiller and integrated fume extraction system\u003c\/p\u003e\n\u003cp\u003eWith 12 kW of power, stable cooling and fume management are essential:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eChiller circuits for the laser source and optics maintain temperature within specified ranges\u003c\/li\u003e\n\u003cli\u003eIntegrated extraction captures fumes and particulates at the cutting zone\u003c\/li\u003e\n\u003cli\u003eExhaust connections interface with your building filtration or venting systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProper implementation of cooling and extraction helps protect the machine’s optics, electronics, and your broader shop environment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ASSIST GASES --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eAssist gases \u0026amp; strategy\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, and air (configuration dependent)\u003c\/p\u003e\n\u003cp\u003eTypical gas strategies on a 12 kW platform include:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOxygen:\u003c\/strong\u003e high-speed cutting on carbon steel, especially thick sections, with oxidized edges\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNitrogen:\u003c\/strong\u003e oxide-free edges on stainless and aluminum, tuned for weld prep and surface finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry air:\u003c\/strong\u003e cost-sensitive cutting for parts where a light oxide tint is acceptable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGas consumption on 12 kW systems can be significant; we help size bulk tanks, cylinders, or compressor-based solutions according to your duty cycle and material mix.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- MOTION SYSTEM --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eMotion system \u0026amp; structure\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eMotion:\u003c\/strong\u003e servo-driven gantry with precision linear guidance\u003c\/p\u003e\n\u003cp\u003eThe motion platform is designed for:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eSmooth interpolation even at the high accelerations enabled by 12 kW power\u003c\/li\u003e\n\u003cli\u003eAccurate feature placement across the full 5×10 envelope\u003c\/li\u003e\n\u003cli\u003eRepeatable performance over long runs and multiple shifts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMechanical stiffness and tuned motion parameters are critical to taking full advantage of 12 kW cutting speeds without compromising geometry or edge quality.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ELECTRICAL \/ FOOTPRINT --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eElectrical \u0026amp; footprint (high level)\u003c\/h4\u003e\n\u003cp\u003eDetailed electrical and footprint documentation is provided during specification. In general, the system is designed for:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eUS industrial 3-phase power with capacity sized for 12 kW operation\u003c\/li\u003e\n\u003cli\u003eInstallation in fabrication bays, dedicated laser rooms, or integrated cells\u003c\/li\u003e\n\u003cli\u003eRigging and access routes typical of 5×10 enclosed laser systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePre-install planning minimizes surprises at delivery and focuses commissioning on dialing in your actual jobs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"umpro-product__note\"\u003e\u003cem\u003e Real-world thickness capability and cut quality depend on alloy, assist gas, nozzle, parameter choices, and edge-quality expectations. For critical part families, we recommend qualification runs on your material and fixtures before locking in final tolerances and cycle-time commitments. \u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- APPLICATIONS \/ USE CASES --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n\u003cp\u003eThe 12 kW, 5×10 ft Umprotech enclosed fiber laser is typically deployed as a \u003cstrong\u003eprimary production engine\u003c\/strong\u003e in heavy fabrication, machinery OEM, and high-throughput contract manufacturing environments. It can operate as a standalone cell or as part of an integrated line with forming, machining, and welding operations.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__usecases-grid\"\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eThick-plate and structural components\u003c\/h4\u003e\n\u003cp\u003eCutting of structural plates, connection details, stiffeners, and heavy brackets where traditional methods (plasma, oxy-fuel) may not meet edge-quality or downstream machining requirements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003ePanels, cabinets \u0026amp; machine covers\u003c\/h4\u003e\n\u003cp\u003eLarge panels, cabinet sides, machine covers, and base plates cut from full 5×10 sheets, with accurate features and bend allowances for efficient forming and assembly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eHigh-throughput OEM kits\u003c\/h4\u003e\n\u003cp\u003eOEMs can nest complete kits—brackets, plates, gussets, and panels—on 5×10 sheets, using 12 kW power to keep cycle times compatible with robotic welding and automated assembly downstream.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eHVAC, ducting \u0026amp; building systems\u003c\/h4\u003e\n\u003cp\u003eDuct panels, plenums, structural rails, and mounting hardware where 12 kW power covers both thin sheet and heavier support components on the same machine.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eArchitectural \u0026amp; decorative metalwork\u003c\/h4\u003e\n\u003cp\u003eSignage, architectural panels, perforated screens, and decorative elements in stainless and aluminum, with parameter sets tuned for cosmetic quality and finishing processes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eJob-shop high-mix production\u003c\/h4\u003e\n\u003cp\u003eHigh-mix, rapid-turn jobs where the combination of 12 kW speed and 5×10 nesting simplifies scheduling and allows the laser to absorb urgent work without impacting larger runs as heavily.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003ePrototyping \u0026amp; pilot builds on production hardware\u003c\/h4\u003e\n\u003cp\u003eEngineering teams can validate thick-plate and multi-material designs on the same 12 kW platform used for production, reducing risk when moving from prototype nests to full-scale jobs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eIntegration into automated cells\u003c\/h4\u003e\n\u003cp\u003eServes as the cutting front-end of a highly automated cell, paired with material towers, automated load\/unload, robotic bending, and welding, where 12 kW cutting ensures the laser is not the bottleneck.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eIn many operations, the 12 kW 5×10 cell becomes the \u003cstrong\u003ethroughput and heavy-gauge anchor\u003c\/strong\u003e, with smaller or lower-power lasers handling lighter work, prototypes, or specialized materials.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- CONFIGURATIONS \u0026 OPTIONS --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 12 kW 5×10 enclosed fiber laser is provided as a \u003cstrong\u003eready-to-run platform\u003c\/strong\u003e. All core elements—fiber source, auto-focus head, FSCUT control, full enclosure, extraction, and chiller—are standard. Configuration choices primarily align the system with your material strategy, gas infrastructure, and internal standards.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber source options:\u003c\/strong\u003e 12 kW Raycus or 12 kW IPG, selected according to your installed base, preferred service partners, and corporate standards for fiber lasers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssist gas configuration:\u003c\/strong\u003e support for N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, and air (configuration dependent). We can help you size bulk or high-pressure gas systems for a 12 kW duty cycle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl stack:\u003c\/strong\u003e FSCUT controller with CypCut CAM\/nesting included; no separate flat-sheet CAM license is required for core cutting operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e standard, with parameter libraries structured for your specific materials and thickness bands, simplifying daily operation and training.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-cover enclosure \u0026amp; extraction:\u003c\/strong\u003e integrated safety and fume-management solution to minimize project risk and engineering time around guarding and air handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial chiller:\u003c\/strong\u003e sized for continuous 12 kW duty, maintaining laser and optics performance over high-duty production cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork \u0026amp; workflow integration:\u003c\/strong\u003e supports network-based file transfer and shared job folders; easy to plug into CAD\/ERP-driven workflows with defined hand-off points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomation \u0026amp; custom cell concepts:\u003c\/strong\u003e options and guidance for future or immediate integration with load\/unload systems, towers, conveyors, or robot cells surrounding the 12 kW platform.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor unique applications—special alloys, strict internal standards, or specific OEM specifications—we can work with your engineering team to define recommended parameter windows, workflows, and layout concepts around the 12 kW 5×10 cell.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- IMPLEMENTATION \u0026 SUPPORT --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n\u003cp\u003eIntegrating a \u003cstrong\u003e12 kW 5×10 laser\u003c\/strong\u003e is a strategic decision. We support US job shops, OEMs, and integrators from early evaluation through commissioning and ramp-up, with a focus on \u003cstrong\u003ereal parts, realistic cycle times, and sustainable processes\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-installation planning:\u003c\/strong\u003e review of power capacity, gas infrastructure, exhaust routing, floor layout, rigging paths, and safety requirements so site preparation is clear before the machine ships.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart \u0026amp; process review:\u003c\/strong\u003e analysis of representative parts, materials, thickness ranges, and batch sizes to confirm that a 12 kW 5×10 configuration is aligned with your current and projected workload.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCypCut workflow setup:\u003c\/strong\u003e support for nesting templates, layer conventions, micro-joint and lead-in strategies, and parameter libraries tuned to your alloys and thicknesses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator \u0026amp; maintenance training:\u003c\/strong\u003e training on safe operation of a 12 kW system, startup\/ shutdown, basic troubleshooting, optics and nozzle care, and scheduled maintenance tasks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOngoing process support:\u003c\/strong\u003e assistance with new materials, cut-quality optimization, cycle-time improvements, and integration questions as you move more work onto the 12 kW cell.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__cta\"\u003e\u003cstrong\u003eNext step:\u003c\/strong\u003e send representative part files (DXF\/STEP\/PDF) and your material\/thickness ranges. We’ll review fit, estimate cycle times, and recommend a 12 kW 5×10 configuration and assist-gas strategy aligned with your throughput and ROI targets.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- TECHNICAL FAQ --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--faq umpro-product-faq\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eTechnical FAQ – 12 kW · 5×10 ft enclosed fiber laser\u003c\/h3\u003e\n\u003cdiv class=\"umpro-product-faq__grid\"\u003e\n\u003c!-- FAQ 1 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhen does it make sense to choose a 12 kW 5×10 system over a 6 kW or 3 kW machine?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eA 12 kW 5×10 system is justified when laser cutting is a core production bottleneck and a large portion of your workload involves mid-to-thick material or high part volumes. In particular, it is a strong fit if:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eYou frequently cut thicker plate where 3–6 kW parameters are limiting cycle times\u003c\/li\u003e\n\u003cli\u003eYour downstream forming\/welding capacity is underutilized because laser cutting can’t keep up\u003c\/li\u003e\n\u003cli\u003eYou want wider process windows and robust cut-through behavior on demanding geometries\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf most of your work is thin gauge with moderate volumes, a lower-power system may provide a better cost\/performance balance. We can help quantify this using your actual parts and volumes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 2 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhat thickness range can a 12 kW 5×10 system realistically handle?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eA 12 kW system supports \u003cstrong\u003eaggressive cutting on thin and mid-gauge sheets\u003c\/strong\u003e and extends into demanding thick-plate applications in mild steel, stainless, and aluminum. That said, real limits depend on:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eAlloy and material consistency (mild vs high-strength vs stainless vs aluminum)\u003c\/li\u003e\n\u003cli\u003eAssist gas type, purity, and available pressure\u003c\/li\u003e\n\u003cli\u003eEdge-quality and tolerance targets (e.g., weld-ready vs. to-be-machined)\u003c\/li\u003e\n\u003cli\u003eDesired balance between speed, quality, and nozzle\/consumable life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor critical thickness ranges, we recommend sample cutting and parameter tuning on your material before locking in specifications or promising cycle times to your customers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 3 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow does 12 kW power affect assist gas consumption and operating cost?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eHigher power levels generally increase assist gas usage because optimal parameters often involve higher pressures and larger nozzle sizes—especially on thick material. However, 12 kW also reduces cycle times. In practice:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eGas consumption per minute may increase, but gas consumption per part can decrease due to shorter cuts\u003c\/li\u003e\n\u003cli\u003eBulk gas solutions become more attractive at higher utilization levels\u003c\/li\u003e\n\u003cli\u003eCareful parameter tuning is important to keep gas usage and edge quality in balance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe can help estimate gas costs and suggest supply strategies based on your duty cycle and material mix.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 4 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eIs CypCut sufficient for high-mix, high-power 12 kW production?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eYes. For flat-sheet fiber lasers, \u003cstrong\u003eCypCut is commonly used as the primary programming and nesting environment\u003c\/strong\u003e, even on high-power systems. It includes:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eAdvanced nesting for full 5×10 sheets and remnants\u003c\/li\u003e\n\u003cli\u003eControl over lead-ins, micro joints, and cut sequence (critical on thick plate)\u003c\/li\u003e\n\u003cli\u003eSimulation and parameter management suited to high-power processes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSome operations integrate additional systems for quoting, order management, or MES\/ERP—but day-to-day laser programs are typically created and tuned in CypCut.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 5 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhat do we need to consider on the facility side for a 12 kW installation?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eA 12 kW installation is more demanding than lower-power systems. Key facility considerations include:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eElectrical capacity (voltage, amperage, and distribution) sized for a 12 kW laser and chiller\u003c\/li\u003e\n\u003cli\u003eAssist gas storage, pressure, and piping suitable for high flow rates and duty cycles\u003c\/li\u003e\n\u003cli\u003eExhaust and filtration capacity to handle higher fume generation from thick-plate cutting\u003c\/li\u003e\n\u003cli\u003eFloor space, access paths, and clearances for a full 5×10 enclosed platform\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese points are covered in detail in the pre-installation documentation we provide during the specification phase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 6 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow complex is operator training for a 12 kW fiber laser with FSCUT + CypCut?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eThe basic interface is similar to lower-power FSCUT\/CypCut systems, but 12 kW adds extra responsibility in terms of safety, parameter control, and maintenance discipline. Training covers:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eSafe startup\/shutdown procedures and interlock checks\u003c\/li\u003e\n\u003cli\u003eLoading nests, selecting material and thickness libraries, and adjusting parameters within defined limits\u003c\/li\u003e\n\u003cli\u003eResponding to alarms, inspecting optics\/nozzles, and recognizing early signs of process instability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith clear procedures and parameter libraries, operators with CNC or fabrication experience can become productive relatively quickly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 7 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhat does routine maintenance look like on a 12 kW system, and how critical is it?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eOn a 12 kW system, routine maintenance is especially important because of the higher energy density and throughput. Typical recurring tasks include:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eRegular inspection and cleaning\/replacement of nozzles and protective windows\u003c\/li\u003e\n\u003cli\u003eChecking assist gas filters, hoses, and fittings for contamination or leaks\u003c\/li\u003e\n\u003cli\u003eMonitoring chiller performance, fluid levels, and alarm history\u003c\/li\u003e\n\u003cli\u003eCleaning the cutting area and inspecting the motion system for wear or contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePreventive maintenance schedules and checklists are provided, and training emphasizes the impact of maintenance on cut quality, uptime, and consumable life at 12 kW.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 8 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow does the fully enclosed Class 1 design interact with our safety program at 12 kW?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eThe Class 1 enclosure is designed to contain the beam and process light under normal operation, even at 12 kW. For your safety program, this typically means:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eLaser hazard zones can be localized around the enclosure and loading area\u003c\/li\u003e\n\u003cli\u003eOperators typically do not require broad-area laser eyewear outside the machine\u003c\/li\u003e\n\u003cli\u003eSafety reviews focus on interlock integrity, procedures, and lockout\/tagout practices\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe provide documentation to support safety audits and help ensure that procedures align with your internal standards.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 9 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eCan the 12 kW 5×10 system integrate with our existing CAD\/ERP\/MES workflows?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eYes. Integration typically follows a pattern similar to lower-power systems, with more emphasis on scheduling and nesting efficiency. Common setups include:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eGeometry and part metadata managed in your existing CAD and ERP\/MRP tools\u003c\/li\u003e\n\u003cli\u003eFlat patterns exported as DXF\/DWG\/STEP with consistent naming tied to part numbers\u003c\/li\u003e\n\u003cli\u003eCypCut importing these files for nesting, lead-in strategies, and parameter assignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe can help define folder structures, naming conventions, and job-release workflows to keep engineering, planning, and the 12 kW cell synchronized.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 10 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow do we determine if a 12 kW 5×10 configuration is the right investment level for us?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eThe decision should be based on your actual work and bottlenecks—not just headline power numbers. We typically work through:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003ePart mix: thickness distribution, materials, and geometry complexity\u003c\/li\u003e\n\u003cli\u003eVolumes: yearly part counts, batch sizes, and growth projections\u003c\/li\u003e\n\u003cli\u003eCurrent constraints: where your existing cutting, forming, or welding capacity is falling behind\u003c\/li\u003e\n\u003cli\u003eROI: estimated cycle-time savings and throughput gains compared to lower-power options\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUsing your part data and real assumptions about utilization, we can compare 12 kW 5×10 against alternatives and recommend whether it should be your primary cutting platform, part of a multi-machine strategy, or a future-stage upgrade.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c\/div\u003e\n\u003cp class=\"umpro-product-faq__closing\"\u003e\u003cstrong\u003eStill evaluating 12 kW?\u003c\/strong\u003e Send us a sample of your part mix (DXF\/STEP\/PDF) and basic volume data. We’ll prepare a targeted assessment and configuration recommendation for your 12 kW 5×10 enclosed fiber laser cell.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966015795566,"sku":"UFL-5x10-12KW-ENC","price":229900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-12kw-enclosed-fiber-laser-cutter-6x20ft-fscut-5723155.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-2kw-6x12ft","title":"Umprotech Enclosed Fiber Laser Cutter 2kW 6x12ft FSCUT","description":"\u003csection class=\"umpro-product umpro-product--flagship\"\u003e\n  \u003c!-- HERO \/ OVERVIEW --\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003cp class=\"umpro-product__eyebrow\"\u003eEnclosed Fiber Laser Cutting Cell · Large-Format 6×12 Platform\u003c\/p\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003e\n      Umprotech Enclosed Fiber Laser Cutter – 2 kW · 6×12 ft · FSCUT \/ CypCut\n    \u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003e\n      A fully enclosed, \u003cstrong\u003eproduction-ready 2 kW fiber laser system\u003c\/strong\u003e on a\n      \u003cstrong\u003e6×12 ft (72×144\") bed\u003c\/strong\u003e, built for US job shops, OEMs, and fabrication cells that need\n      \u003cstrong\u003eclean, consistent sheet cutting\u003c\/strong\u003e on large-format stock. The FSCUT controller with CypCut CAM\n      streamlines nesting and job setup, while the Class 1 enclosure, integrated fume extraction, and industrial\n      chiller support safe, stable operation in demanding environments.\n    \u003c\/p\u003e\n    \u003cdiv class=\"umpro-product__hero-grid\"\u003e\n      \u003cp class=\"umpro-product__hero-line\"\u003e\n        \u003cstrong\u003eLaser power:\u003c\/strong\u003e 2 kW fiber (Raycus \/ IPG) ·\n        \u003cstrong\u003eBed size:\u003c\/strong\u003e 6×12 ft (72×144\") ·\n        \u003cstrong\u003eController:\u003c\/strong\u003e FSCUT with CypCut CAM \/ nesting\n      \u003c\/p\u003e\n      \u003cp class=\"umpro-product__hero-line\"\u003e\n        \u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 ·\n        \u003cstrong\u003eHead:\u003c\/strong\u003e Auto-focus fiber cutting head ·\n        \u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e \/ O\u003csub\u003e2\u003c\/sub\u003e \/ air (configuration dependent)\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cul class=\"umpro-product__hero-points\"\u003e\n      \u003cli\u003e2 kW fiber power for everyday thin and mid-gauge sheet fabrication\u003c\/li\u003e\n      \u003cli\u003eLarge 6×12 ft platform for high-yield nesting and large-format parts\u003c\/li\u003e\n      \u003cli\u003eClass 1 fully enclosed design with fume extraction and industrial chiller\u003c\/li\u003e\n      \u003cli\u003eFSCUT controller with CypCut for nesting, simulation, and process control\u003c\/li\u003e\n      \u003cli\u003eBalanced operating cost and capability for general fabrication and OEM work\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/header\u003e\n\n  \u003c!-- POSITIONING \/ VALUE FOR US BUYERS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 2 kW, 6×12 ft enclosed fiber laser is positioned as a\n      \u003cstrong\u003elarge-format, mid-power production cell\u003c\/strong\u003e—ideal for shops that want the material efficiency and\n      design freedom of full 6×12 sheets, without the cost and utility demands of very high-power lasers. It’s a solid\n      fit for high-mix fabrication, OEM panels, and contract manufacturing where thin and mid-gauge material dominates.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003e2 kW fiber power for everyday production:\u003c\/strong\u003e a proven power level for thin and typical mid-gauge\n        carbon steel, stainless, and aluminum used in panels, cabinets, frames, and guards. Balances speed, cut quality,\n        and operating cost for day-to-day shop work.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eLarge 6×12 ft (72×144\") bed:\u003c\/strong\u003e supports high-yield nesting on full-size sheets. Ideal for large\n        panels, enclosure shells, and long parts, as well as high-density nests of smaller components. Reduces skeleton\n        handling and offcuts compared to smaller tables.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFull-cover, Class 1 enclosure:\u003c\/strong\u003e light-tight, interlocked housing with viewing windows and\n        integrated fume capture. Supports safety approvals and helps contain process fumes and light in busy fabrication\n        bays.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e automatically tracks material thickness and moderate sheet warp across\n        the 6×12 bed, helping maintain stable kerf width and edge quality, reducing dross and touch-up time.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFSCUT controller with CypCut CAM:\u003c\/strong\u003e a widely adopted industrial control and nesting stack,\n        supporting DXF\/STEP import, intelligent nesting, micro joints, common-line cutting, and simulation for predictable\n        cycle times and scrap control.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegrated fume extraction \u0026amp; industrial chiller:\u003c\/strong\u003e delivered as part of a complete cell, not\n        as add-ons. Stable thermal management and fume control support consistent cut quality and longer component life.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAssist gas flexibility:\u003c\/strong\u003e gas plumbing supports nitrogen, oxygen, and air (configuration\n        dependent), allowing you to dial in edge quality and operating cost per job.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegration-ready large-format platform:\u003c\/strong\u003e fits into cells with press brakes, saws, and welding\n        fixtures where full-size 6×12 sheets are the standard feedstock.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- PERFORMANCE OVERVIEW --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--performance\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003ePerformance: 2 kW power · 6×12 ft reach\u003c\/h3\u003e\n    \u003cp\u003e\n      A \u003cstrong\u003e2 kW fiber source\u003c\/strong\u003e on a \u003cstrong\u003e6×12 ft bed\u003c\/strong\u003e gives fabrication shops a cost-effective\n      way to cut large-format sheets while keeping power draw, gas usage, and total cost of ownership under control.\n      It’s particularly well suited to thin and mid-gauge materials where plate-cutting speeds of higher-power lasers\n      are not required.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__metrics-grid\"\u003e\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eTypical material coverage*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eThin and mid-gauge mild\/carbon steel for brackets, frames, and panels\u003c\/li\u003e\n          \u003cli\u003eStainless steel thicknesses common in cabinets, food\/medical, and architectural work\u003c\/li\u003e\n          \u003cli\u003eAluminum panels, covers, and profiles within 2 kW process windows\u003c\/li\u003e\n          \u003cli\u003eBrass and thin copper alloys in defined thickness ranges for labels, plates, and decorative parts\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *Practical ranges depend on alloy, assist gas, and required edge quality vs. cutting speed.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eThroughput characteristics*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eGood productivity on thin and mid-gauge materials used in everyday fabrication\u003c\/li\u003e\n          \u003cli\u003eHigh part counts per sheet thanks to 6×12 nesting area\u003c\/li\u003e\n          \u003cli\u003eWell suited to high-mix nests of smaller parts where sheet size matters more than extreme power\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *Best evaluated using your own nests and quality targets under realistic gas and utility conditions.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eQuality \u0026amp; repeatability*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eEdge quality suitable for bending, welding, and coating with tuned parameters\u003c\/li\u003e\n          \u003cli\u003eConsistent feature geometry across large 6×12 nests\u003c\/li\u003e\n          \u003cli\u003eStable performance over production shifts with routine maintenance and parameter control\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *Final tolerance and finish should be confirmed via sample cutting on your materials and fixtures.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- DETAILED TECHNICAL SPECIFICATIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 2 kW 6×12 enclosed fiber laser is supplied as a\n      \u003cstrong\u003ecomplete cutting cell\u003c\/strong\u003e. The fiber source, auto-focus head, motion system, enclosure, extraction,\n      chiller, and FSCUT controller are delivered as an integrated package for straightforward installation and startup.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003c!-- LASER SOURCE --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eLaser power \u0026amp; source\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 2 kW fiber (Raycus or IPG options)\u003c\/p\u003e\n        \u003cp\u003e\n          2 kW is a \u003cstrong\u003ebalanced power level\u003c\/strong\u003e for general sheet metal fabrication:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eEfficient cutting of thin and mid-gauge materials common in fabrication shops\u003c\/li\u003e\n          \u003cli\u003eLower power consumption and reduced infrastructure demands versus high-power systems\u003c\/li\u003e\n          \u003cli\u003ePredictable process behavior and simplified parameter sets for daily work\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Raycus and IPG are established industrial fiber sources, supporting stable power delivery and recognized\n          service networks.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- WORKING ENVELOPE --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eWorking envelope\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eBed size \/ stroke:\u003c\/strong\u003e 6×12 ft (72×144\") nominal working area\u003c\/p\u003e\n        \u003cp\u003e\n          The 6×12 format is ideal when you want:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eLarge-format panels, cabinets, and frames cut in one setup\u003c\/li\u003e\n          \u003cli\u003eHigh-density nests of small and mid-size parts on each sheet\u003c\/li\u003e\n          \u003cli\u003eBetter material utilization and fewer skeletons compared to smaller tables\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          The system can also handle remnant sheets; CypCut nesting can be used to maximize usage of offcuts.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CONTROL \/ CAM --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eController \u0026amp; CAM \/ nesting\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eControl:\u003c\/strong\u003e FSCUT industrial motion and laser controller\u003c\/p\u003e\n        \u003cp\u003e\u003cstrong\u003eSoftware:\u003c\/strong\u003e CypCut CAM \/ nesting\u003c\/p\u003e\n        \u003cp\u003e\n          FSCUT + CypCut provide a complete flat-sheet programming workflow for 6×12 production:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eDXF\/STEP import from your CAD tools\u003c\/li\u003e\n          \u003cli\u003eAutomatic and interactive nesting on 6×12 stock and remnants\u003c\/li\u003e\n          \u003cli\u003eLead-in\/lead-out control, corner smoothing, and micro-joints\u003c\/li\u003e\n          \u003cli\u003eCommon-line cutting and bridging to reduce pierces and cycle time\u003c\/li\u003e\n          \u003cli\u003eSimulation and graphical toolpath views for program validation\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Because FSCUT\/CypCut are widely used, operators can often apply prior experience from other laser platforms.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CUTTING HEAD --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eCutting head \u0026amp; auto-focus\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Auto-focus fiber cutting head with capacitive height sensing\u003c\/p\u003e\n        \u003cp\u003e\n          The auto-focus head:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eAdjusts focus for different material thicknesses and types\u003c\/li\u003e\n          \u003cli\u003eMaintains consistent standoff across the large 6×12 working area\u003c\/li\u003e\n          \u003cli\u003eHelps control kerf width and edge quality on mixed nests and non-perfect sheets\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Parameter sets in CypCut tie focus, gas pressure, and speed to defined material\/thickness combinations,\n          simplifying operation.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ENCLOSURE \/ SAFETY --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eEnclosure \u0026amp; safety\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 light-tight housing with interlocks\u003c\/p\u003e\n        \u003cp\u003e\n          Designed for shared production spaces:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eInterlocked doors that prevent cutting when open\u003c\/li\u003e\n          \u003cli\u003eViewing windows to monitor cutting safely\u003c\/li\u003e\n          \u003cli\u003eInternal lighting and access doors for setup and maintenance\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          A Class 1 configuration helps streamline safety approvals and reduces the need for large exclusion zones.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- UTILITIES \/ CHILLER \/ EXTRACTION --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eUtilities, chiller \u0026amp; fume extraction\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e industrial chiller and integrated fume extraction\u003c\/p\u003e\n        \u003cp\u003e\n          The utility package focuses on stability and shop environment:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eChiller circuits for the laser source and optics keep temperatures within specification\u003c\/li\u003e\n          \u003cli\u003eExtraction captures fumes at the cutting area and routes them to your exhaust\/filtration system\u003c\/li\u003e\n          \u003cli\u003eStable thermal and fume conditions support consistent cut quality over long shifts\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ASSIST GASES --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eAssist gases \u0026amp; process strategy\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, and air (configuration dependent)\u003c\/p\u003e\n        \u003cp\u003e\n          Typical gas usage patterns on a 2 kW platform:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003e\n\u003cstrong\u003eOxygen:\u003c\/strong\u003e economical, high-speed cutting of mild steel with an oxidized edge\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003eNitrogen:\u003c\/strong\u003e bright, oxide-free edges on stainless and aluminum, suitable for cosmetic and weld-prep needs\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003eAir:\u003c\/strong\u003e cost-effective option where a slightly oxidized edge is acceptable\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          We can help estimate consumption and recommend storage\/pressure options based on your duty cycle and materials.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- MOTION SYSTEM --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eMotion system \u0026amp; structure\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eMotion:\u003c\/strong\u003e servo-driven gantry with precision linear guidance\u003c\/p\u003e\n        \u003cp\u003e\n          The motion platform is designed to support:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eSmooth motion over long 6×12 paths and complex profiles\u003c\/li\u003e\n          \u003cli\u003eConsistent hole and slot geometry across large nests\u003c\/li\u003e\n          \u003cli\u003eReliable performance in continuous-duty job-shop environments\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ELECTRICAL \/ FOOTPRINT --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eElectrical \u0026amp; footprint (high level)\u003c\/h4\u003e\n        \u003cp\u003e\n          Detailed drawings and connection data are provided during specification. In general, the system is intended for:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eUS industrial 3-phase power supplies sized appropriately for a 2 kW fiber and chiller\u003c\/li\u003e\n          \u003cli\u003ePlacement in fabrication bays or dedicated laser areas with space for loading 6×12 sheets\u003c\/li\u003e\n          \u003cli\u003eRigging paths and floor loading typical of large-format enclosed laser machines\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Pre-installation reviews focus on power, layout, and access so installation day is focused on cutting parts.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cp class=\"umpro-product__note\"\u003e\n      \u003cem\u003e\n        Actual cutting capacity, tolerances, and throughput depend on material grade, assist gas, parameters, and quality\n        targets. For critical parts or tight tolerances, we recommend validating results with sample cuts and agreed\n        parameter windows.\n      \u003c\/em\u003e\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- APPLICATIONS \/ USE CASES --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003e\n      The 2 kW, 6×12 ft Umprotech enclosed fiber laser is commonly used as a\n      \u003cstrong\u003elarge-format sheet-processing cell\u003c\/strong\u003e in fabrication shops and OEM lines, or as a core machine in a\n      cell with press brakes, saws, and welding fixtures. The combination of 2 kW power and 6×12 reach makes it well\n      suited to high-mix work where sheet size and nesting efficiency matter.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__usecases-grid\"\u003e\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eLarge panels \u0026amp; cabinets\u003c\/h4\u003e\n        \u003cp\u003e\n          Cutting of large cabinet walls, panels, and base plates in steel, stainless, and aluminum from full 6×12\n          sheets, with bend lines and features aligned to downstream press-brake operations.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eFrames, guards \u0026amp; structural details\u003c\/h4\u003e\n        \u003cp\u003e\n          Brackets, frames, guards, and structural elements cut at 2 kW, where edge quality and dimensional consistency\n          matter more than extreme throughput.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eHVAC \u0026amp; building hardware\u003c\/h4\u003e\n        \u003cp\u003e\n          Duct panels, plenums, mounting rails, and hardware produced from large-format sheets, benefiting from high-yield\n          nesting on a 6×12 platform.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eOEM component kits\u003c\/h4\u003e\n        \u003cp\u003e\n          Nesting complete kits—panels, brackets, and small hardware plates—on 6×12 sheets for OEM assemblies, with\n          repeatable programs and parameter sets stored in CypCut.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eSignage \u0026amp; architectural elements\u003c\/h4\u003e\n        \u003cp\u003e\n          Large-format signage, architectural panels, and decorative cut-outs in steel, stainless, and aluminum, where\n          6×12 sheets enable big pieces or multi-panel layouts.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eHigh-mix \/ low-to-mid volume work\u003c\/h4\u003e\n        \u003cp\u003e\n          Job shops and contract manufacturers running frequent changeovers, nested parts, and repeat orders where sheet\n          utilization and flexible programming are more important than maximum kW.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003ePrototypes \u0026amp; engineering changes\u003c\/h4\u003e\n        \u003cp\u003e\n          Producing prototypes or revised parts on the same 6×12 platform used for production runs, so engineering\n          changes can be evaluated with full-size nests and realistic sheet usage.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eIntegration into fabrication cells\u003c\/h4\u003e\n        \u003cp\u003e\n          Placed at the front end of a cell with press brakes, hardware insertion, and welding, feeding large-format\n          blanks and kits cut on 6×12 stock directly into downstream operations.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cp\u003e\n      In many shops, the 2 kW 6×12 becomes the \u003cstrong\u003elarge-format workhorse\u003c\/strong\u003e—handling big panels and\n      high-yield nests—while smaller or higher-power lasers focus on thicker plate or specialty materials.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- CONFIGURATIONS \u0026 OPTIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 2 kW 6×12 enclosed fiber laser is delivered as a \u003cstrong\u003eready-to-run system\u003c\/strong\u003e. Core elements\n      — fiber source, auto-focus head, FSCUT control, full enclosure, extraction, and chiller — are standard. Available\n      configuration options let you align the system with your materials, gas strategy, and internal standards.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFiber source options:\u003c\/strong\u003e 2 kW Raycus or 2 kW IPG, selected to match your preferred supplier and\n        service network.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAssist gas configuration:\u003c\/strong\u003e supports N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, and air (configuration\n        dependent). We can help specify regulators, storage, and piping for your duty cycle and thickness range.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eControl stack:\u003c\/strong\u003e FSCUT controller with CypCut CAM\/nesting included—no separate flat-sheet CAM\n        license is required for core 2D laser programming and simulation.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e standard, with CypCut parameter libraries structured by material and\n        thickness to speed setup and support operator consistency.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFull-cover enclosure \u0026amp; extraction:\u003c\/strong\u003e included as standard to simplify safety and shop air\n        projects around the installation.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIndustrial chiller:\u003c\/strong\u003e sized for 2 kW duty, supporting stable performance over extended shifts.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eNetwork \u0026amp; job management:\u003c\/strong\u003e support for network connections and shared job\/part folders so\n        that your CAD, ERP, and laser cell workflows stay aligned.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegration \u0026amp; automation support:\u003c\/strong\u003e guidance for integrating the 6×12 platform into existing\n        cells, or planning future upgrades such as material handling or basic automation.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp\u003e\n      For unique requirements—such as specific OEM standards, specialized alloys, or custom fixtures—we can work with\n      your team to define recommended configurations and processes around the 2 kW 6×12 platform.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- IMPLEMENTATION \u0026 SUPPORT --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003e\n      We support US job shops, OEMs, and integrators through evaluation, installation, and ramp-up, focusing on\n      \u003cstrong\u003eactual parts, real cycle times, and sustainable processes\u003c\/strong\u003e rather than only nameplate power.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePre-installation planning:\u003c\/strong\u003e review of power, floor space, rigging routes, exhaust connections,\n        gas supply (N\u003csub\u003e2\u003c\/sub\u003e\/O\u003csub\u003e2\u003c\/sub\u003e\/air), and safety requirements so site preparation is clear in advance.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePart \u0026amp; material review:\u003c\/strong\u003e evaluation of representative parts, materials, and thickness ranges\n        to confirm that a 2 kW 6×12 configuration matches your workload and expectations.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eCypCut workflow setup:\u003c\/strong\u003e guidance on nesting rules, layer conventions, micro-joint and lead-in\n        strategies, and parameter libraries aligned with your products.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOperator \u0026amp; maintenance training:\u003c\/strong\u003e training on safe operation, startup\/shutdown, basic\n        troubleshooting, and routine maintenance tasks such as nozzle and lens care.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOngoing process support:\u003c\/strong\u003e assistance with new materials, cut-quality tuning, and cycle-time\n        optimization as more work is moved onto the 2 kW 6×12 platform.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp class=\"umpro-product__cta\"\u003e\n      \u003cstrong\u003eNext step:\u003c\/strong\u003e send representative part files (DXF\/STEP\/PDF) along with your materials and thickness\n      ranges. We’ll review fit, estimate cycle times, and recommend a 2 kW 6×12 configuration and assist-gas strategy\n      tailored to your workflow and production goals.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- TECHNICAL FAQ --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--faq umpro-product-faq\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eTechnical FAQ – 2 kW · 6×12 ft enclosed fiber laser\u003c\/h3\u003e\n\n    \u003cdiv class=\"umpro-product-faq__grid\"\u003e\n      \u003c!-- FAQ 1 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How does a 2 kW 6×12 system compare to higher-power lasers?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            A 2 kW 6×12 machine prioritizes \u003cstrong\u003elarge-sheet utilization and everyday fabrication work\u003c\/strong\u003e over\n            extreme cutting speed on thick plate. Compared to higher-power systems:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eLower power and gas consumption and simpler infrastructure\u003c\/li\u003e\n            \u003cli\u003eSufficient capability for many thin and mid-gauge jobs in steel, stainless, and aluminum\u003c\/li\u003e\n            \u003cli\u003eLower capital cost and operating cost than 6–12 kW platforms\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            If a significant portion of your workload is heavy plate or extremely time-sensitive, higher power might be\n            justified. If your mix is mostly thin and mid-gauge, 2 kW with a 6×12 bed often delivers a very strong\n            cost\/performance balance.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 2 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What thickness range is realistic on a 2 kW machine?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            A 2 kW fiber laser is optimized for \u003cstrong\u003ethin and mid-gauge materials\u003c\/strong\u003e common in general\n            fabrication, HVAC, and OEM panels. Exact thickness ranges depend on:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eMaterial type and alloy (mild steel vs high-strength vs stainless vs aluminum)\u003c\/li\u003e\n            \u003cli\u003eAssist gas choice and available pressure\u003c\/li\u003e\n            \u003cli\u003eEdge-quality expectations (cosmetic, weld-prep, or to-be-machined)\u003c\/li\u003e\n            \u003cli\u003eRequired cutting speed and part volumes\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Thicker sections may be possible at reduced speeds or with different quality tradeoffs. We recommend\n            validating your key material\/thickness combinations with sample cuts before finalizing specs.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 3 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Why choose a 6×12 ft bed instead of 5×10 or 4×8?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            A 6×12 bed is ideal if you regularly:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eUse 72×144\" stock or design large panels and cabinets\u003c\/li\u003e\n            \u003cli\u003eBenefit from higher part counts per sheet and fewer skeletons\u003c\/li\u003e\n            \u003cli\u003eWant more flexibility in nesting large parts alongside smaller components\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            If your supply chain is already centered on 6×12 sheets, this format helps you take full advantage of that\n            material standard.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 4 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Is 2 kW enough power for a 6×12 platform?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Yes, if your primary focus is \u003cstrong\u003ethin and mid-gauge materials\u003c\/strong\u003e and you are using the 6×12\n            platform to maximize nesting and material efficiency rather than cut heavy plate at extreme speeds. In many\n            shops:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eThe majority of work falls within a thickness range well-suited to 2 kW\u003c\/li\u003e\n            \u003cli\u003eCycle time is driven more by part geometry and nesting than by absolute power\u003c\/li\u003e\n            \u003cli\u003eOperating cost and utility simplicity are higher priorities than maximum throughput\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Where thick-plate jobs are occasional rather than core, 2 kW plus 6×12 sheet capacity can be a strong\n            configuration.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 5 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How does CypCut handle nesting for large 6×12 sheets and remnants?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            CypCut is well suited to large-format nesting. It supports:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eAutomatic and interactive nesting on full 6×12 stock\u003c\/li\u003e\n            \u003cli\u003eCustom sheet definitions to match your remnant sizes\u003c\/li\u003e\n            \u003cli\u003eCommon-line cutting, bridging, and skeleton management strategies\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We can help define nesting rules and naming conventions so you can easily re-use remnants and keep track of\n            sheet utilization.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 6 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What facility requirements should we plan for with a 2 kW 6×12 system?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Compared to higher-power systems, a 2 kW machine is relatively modest on utilities, but you should still\n            plan for:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003e3-phase power sized for the laser, motion system, and chiller\u003c\/li\u003e\n            \u003cli\u003eAssist gas storage and regulation aligned with your duty cycle (cylinders or bulk)\u003c\/li\u003e\n            \u003cli\u003eExhaust or filtration capacity for the integrated fume extraction\u003c\/li\u003e\n            \u003cli\u003eFloor space and access paths for 6×12 sheet handling and rigging\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            These requirements are documented in the pre-installation information provided during specification.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 7 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What does day-to-day maintenance look like on this 2 kW 6×12 platform?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Routine maintenance is focused on keeping optics clean, gas systems stable, and mechanics in good condition:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eInspecting and cleaning\/replacing nozzles and protective lenses\u003c\/li\u003e\n            \u003cli\u003eChecking assist gas filters, connections, and leak points\u003c\/li\u003e\n            \u003cli\u003eMonitoring chiller performance and fluid levels\u003c\/li\u003e\n            \u003cli\u003eCleaning the cutting area and visually checking motion components\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We supply maintenance schedules and checklists, and training covers how to perform these tasks safely and\n            efficiently.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 8 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How does the fully enclosed Class 1 design affect safety and layout?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            The Class 1 enclosure helps contain the beam and process light, simplifying laser safety considerations:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eHazard zones can be largely confined to the enclosure and loading area\u003c\/li\u003e\n            \u003cli\u003eOperators generally do not need laser eyewear outside the immediate machine area under normal operation\u003c\/li\u003e\n            \u003cli\u003eSafety reviews focus on interlocks, procedures, and training instead of open-beam controls\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            This can make it easier to install the machine near other operations in a shared fabrication bay.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 9 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Can this 2 kW 6×12 system integrate with our existing CAD\/ERP workflow?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Yes. Typical integrations use CypCut as the cutting CAM layer:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eEngineering maintains geometry and part data in your existing CAD system\u003c\/li\u003e\n            \u003cli\u003eFlat patterns are exported as DXF\/STEP with naming aligned to ERP\/MRP part numbers\u003c\/li\u003e\n            \u003cli\u003eCypCut imports these files for nesting, parameter assignment, and simulation\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We can help define folder structures and naming standards that keep engineering, planning, and the laser\n            cell in sync.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 10 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How do we decide if a 2 kW 6×12 configuration is right for our shop?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            The best way is to look at your actual part mix and bottlenecks. We typically work through:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eMaterial and thickness distributions across your current and projected jobs\u003c\/li\u003e\n            \u003cli\u003ePart geometries and required edge qualities for each segment of work\u003c\/li\u003e\n            \u003cli\u003eCurrent constraints in cutting, forming, or welding operations\u003c\/li\u003e\n            \u003cli\u003eROI estimates comparing 2 kW 6×12 to smaller tables or higher-power options\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Based on this data, we can recommend whether a 2 kW 6×12 platform should be your primary large-format\n            machine, part of a multi-laser strategy, or a future upgrade step as volumes grow.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n    \u003c\/div\u003e\n\n    \u003cp class=\"umpro-product-faq__closing\"\u003e\n      \u003cstrong\u003eStill evaluating 2 kW on a 6×12 platform?\u003c\/strong\u003e Share sample part files and your material\/thickness\n      ranges. We’ll provide a targeted assessment and configuration recommendation for your 2 kW 6×12 enclosed fiber\n      laser cell.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e\n","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966015828334,"sku":"UFL-6x12-2KW-ENC","price":139900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-12kw-enclosed-fiber-laser-cutter-6x20ft-fscut-5723155.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-3kw-6x12ft","title":"Umprotech Enclosed Fiber Laser Cutter 3kW 6x12ft FSCUT","description":"\u003csection class=\"umpro-product umpro-product--flagship\"\u003e\n  \u003c!-- HERO \/ OVERVIEW --\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003cp class=\"umpro-product__eyebrow\"\u003eEnclosed Fiber Laser Cutting Cell · Large-Format 6×12 Platform\u003c\/p\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003e\n      Umprotech Enclosed Fiber Laser Cutter – 3 kW · 6×12 ft · FSCUT \/ CypCut\n    \u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003e\n      A fully enclosed, \u003cstrong\u003eproduction-ready 3 kW fiber laser system\u003c\/strong\u003e on a\n      \u003cstrong\u003e6×12 ft (72×144\") bed\u003c\/strong\u003e, designed for US job shops, OEMs, and fabrication cells that need\n      \u003cstrong\u003eclean, repeatable cutting on large-format sheets\u003c\/strong\u003e. Built around a 3 kW fiber source, FSCUT\n      industrial controller, and CypCut CAM\/nesting, this platform delivers high throughput and robust quality for\n      mixed metals, high-mix nests, and large panels—while maintaining Class 1 safety and stable operation over long\n      shifts.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__hero-grid\"\u003e\n      \u003cp class=\"umpro-product__hero-line\"\u003e\n        \u003cstrong\u003eLaser power:\u003c\/strong\u003e 3 kW fiber (Raycus \/ IPG) ·\n        \u003cstrong\u003eBed size:\u003c\/strong\u003e 6×12 ft (72×144\") ·\n        \u003cstrong\u003eController:\u003c\/strong\u003e FSCUT with CypCut CAM \/ nesting\n      \u003c\/p\u003e\n      \u003cp class=\"umpro-product__hero-line\"\u003e\n        \u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 ·\n        \u003cstrong\u003eHead:\u003c\/strong\u003e Auto-focus fiber cutting head ·\n        \u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e \/ O\u003csub\u003e2\u003c\/sub\u003e \/ air (configuration dependent)\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cul class=\"umpro-product__hero-points\"\u003e\n      \u003cli\u003e3 kW fiber power for fast, clean cutting on thin and mid-gauge sheet\u003c\/li\u003e\n      \u003cli\u003eLarge 6×12 ft platform for high-yield nesting and large-format cabinet\/panel work\u003c\/li\u003e\n      \u003cli\u003eClass 1 fully enclosed cell with integrated fume extraction and industrial chiller\u003c\/li\u003e\n      \u003cli\u003eFSCUT controller with CypCut for nesting, simulation, and diagnostics\u003c\/li\u003e\n      \u003cli\u003eBalanced operating costs with enough power for most everyday fabrication jobs\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/header\u003e\n\n  \u003c!-- POSITIONING \/ VALUE FOR US BUYERS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 3 kW, 6×12 ft enclosed fiber laser is positioned as a\n      \u003cstrong\u003elarge-format production workhorse\u003c\/strong\u003e for shops that cut mostly thin and mid-gauge material,\n      but need the nesting efficiency and part envelope offered by full 6×12 sheets. It’s a strong choice when you\n      want \u003cstrong\u003emore power than 2 kW\u003c\/strong\u003e for higher throughput and thicker jobs, without committing to the\n      infrastructure and cost of very high-power (6–12 kW) platforms.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003e3 kW fiber laser (Raycus \/ IPG):\u003c\/strong\u003e provides the speed and cut quality required for the majority\n        of sheet metal jobs in stainless, carbon steel, aluminum, and brass. Compared to 2 kW, 3 kW offers stronger\n        performance on mid-gauge material and more headroom for mixed-thickness nests.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eLarge 6×12 ft (72×144\") bed:\u003c\/strong\u003e handles full-size 6×12 sheets, supporting large cabinets,\n        panels, and high-density nests of smaller parts. Fewer setups and less skeleton handling compared to smaller\n        tables mean better material utilization and reduced handling time.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFull-cover, Class 1 enclosure:\u003c\/strong\u003e interlocked, light-tight housing with viewing windows and\n        integrated fume capture. Helps meet typical US laser safety expectations and simplifies risk assessments for\n        placing the machine in a shared fabrication bay.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e compensates for sheet warp and thickness changes across the full\n        6×12 bed, preserving kerf width and edge quality. Reduces manual refocusing, cut-to-cut variation, and dross\n        cleanup on mixed nests.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFSCUT controller with CypCut software:\u003c\/strong\u003e widely used control and CAM stack enabling intelligent\n        nesting, lead-in\/out optimization, micro-joints, and simulation. Operators benefit from a familiar, proven\n        interface and industrial-grade diagnostics.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegrated fume extraction \u0026amp; industrial chiller:\u003c\/strong\u003e delivered as a complete cell so you’re\n        not piecing together utilities. Stable cooling and fume management support consistent cut quality and longer\n        component life.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAssist gas flexibility:\u003c\/strong\u003e gas plumbing can be configured for nitrogen, oxygen, and air\n        (configuration dependent), letting you tune edge quality and cost per job.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eDesigned for production:\u003c\/strong\u003e built to run in multi-shift environments, with a focus on stable\n        cut parameters, repeatable nests, and straightforward operator workflows.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- PERFORMANCE OVERVIEW --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--performance\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003ePerformance: 3 kW power · 6×12 ft full-sheet capacity\u003c\/h3\u003e\n    \u003cp\u003e\n      A \u003cstrong\u003e3 kW fiber source\u003c\/strong\u003e combined with a \u003cstrong\u003e6×12 ft bed\u003c\/strong\u003e offers a practical balance\n      of throughput, capability, and cost for fabrication shops where most work falls in thin and mid-gauge ranges,\n      and where full-size 6×12 sheets are already part of the material strategy.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__metrics-grid\"\u003e\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eTypical material coverage*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eThin and mid-gauge mild\/carbon steel used in cabinets, frames, and structural sheet components\u003c\/li\u003e\n          \u003cli\u003eStainless steel gauges common in enclosures, food\/medical equipment, and architectural parts\u003c\/li\u003e\n          \u003cli\u003eAluminum panels, covers, and frames within 3 kW process windows\u003c\/li\u003e\n          \u003cli\u003eBrass and copper alloys in defined thickness ranges for plates, labels, and decorative parts\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *Exact ranges depend on alloy, assist gas, nozzle, and edge-quality vs. speed tradeoffs.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eThroughput characteristics*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eFaster throughput than 2 kW systems on many mid-gauge materials\u003c\/li\u003e\n          \u003cli\u003eHigh parts-per-sheet due to large 6×12 nesting area\u003c\/li\u003e\n          \u003cli\u003eWell suited to high-mix nests where 3 kW provides robust process windows\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *Best evaluated with your own nests and part mix under realistic gas and duty-cycle conditions.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eQuality \u0026amp; repeatability*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eEdges suitable for bending, welding, coating, or brushing with tuned parameters\u003c\/li\u003e\n          \u003cli\u003eConsistent feature geometry across full 6×12 nests and repeat orders\u003c\/li\u003e\n          \u003cli\u003eStable performance over shifts with routine maintenance and controlled parameter changes\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *For critical tolerances, we recommend qualification runs using your material and fixturing.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- DETAILED TECHNICAL SPECIFICATIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 3 kW 6×12 enclosed fiber laser is delivered as a\n      \u003cstrong\u003eturnkey cutting cell\u003c\/strong\u003e. Fiber source, motion platform, auto-focus head, control hardware\/software,\n      enclosure, extraction, and chiller are configured to function as one integrated system once connected to your\n      power, assist gas, and exhaust infrastructure.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003c!-- LASER SOURCE --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eLaser power \u0026amp; source\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 3 kW fiber (Raycus or IPG)\u003c\/p\u003e\n        \u003cp\u003e\n          3 kW provides a proven middle ground between entry-level and high-power systems:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eStrong performance on thin and mid-gauge materials in steel, stainless, and aluminum\u003c\/li\u003e\n          \u003cli\u003eHeadroom for moderate-thickness jobs that may challenge 1–2 kW machines\u003c\/li\u003e\n          \u003cli\u003eManageable power, gas, and infrastructure requirements compared to 6–12 kW platforms\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Raycus and IPG are established industrial fiber suppliers, offering stable beam quality and recognized support\n          networks in production environments.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- WORKING ENVELOPE --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eWorking envelope\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eBed size \/ stroke:\u003c\/strong\u003e 6×12 ft (72×144\") nominal working area\u003c\/p\u003e\n        \u003cp\u003e\n          The 6×12 platform enables:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eLarge panels, cabinets, and frames cut in a single setup\u003c\/li\u003e\n          \u003cli\u003eHigh-density nests of smaller components for high-mix orders\u003c\/li\u003e\n          \u003cli\u003eBetter material utilization and fewer offcuts than smaller sheet formats\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Remnant sheets can also be defined as custom sheet sizes in CypCut for optimized reuse.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CONTROLLER \/ CAM --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eController \u0026amp; CAM \/ nesting\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eControl:\u003c\/strong\u003e FSCUT industrial motion and laser controller\u003c\/p\u003e\n        \u003cp\u003e\u003cstrong\u003eSoftware:\u003c\/strong\u003e CypCut CAM \/ nesting suite\u003c\/p\u003e\n        \u003cp\u003e\n          FSCUT + CypCut form a complete workflow from DXF\/STEP to finished parts on 6×12 sheets:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eDXF\/DWG\/STEP import from common CAD tools\u003c\/li\u003e\n          \u003cli\u003eAutomatic and manual nesting on full sheets and remnants\u003c\/li\u003e\n          \u003cli\u003eLead-in\/lead-out tuning, micro-joints, corner smoothing, and sequence control\u003c\/li\u003e\n          \u003cli\u003eCommon-line cutting and bridging to reduce pierces and cycle time\u003c\/li\u003e\n          \u003cli\u003eSimulation and visual toolpath verification before cutting\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          The control stack is widely used in industry, which can reduce training time and simplify hiring for\n          operator roles.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CUTTING HEAD --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eCutting head \u0026amp; auto-focus\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Auto-focus fiber cutting head with capacitive height sensing\u003c\/p\u003e\n        \u003cp\u003e\n          The auto-focus head is designed for mixed material and thickness environments:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eAutomatic adjustment of focus position for each material\/thickness combination\u003c\/li\u003e\n          \u003cli\u003eConsistent stand-off and kerf width across the large 6×12 bed, even with moderate sheet warp\u003c\/li\u003e\n          \u003cli\u003eReduced manual intervention when switching jobs or materials\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Parameter libraries tie focus, gas pressure, and feedrate to specific material\/thickness profiles to support\n          repeatable results across shifts.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ENCLOSURE \/ SAFETY --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eEnclosure \u0026amp; safety\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 light-tight housing with safety interlocks\u003c\/p\u003e\n        \u003cp\u003e\n          The enclosure is engineered for busy fabrication environments:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eInterlocked doors that stop cutting if opened\u003c\/li\u003e\n          \u003cli\u003eViewing windows for monitoring without open-beam exposure\u003c\/li\u003e\n          \u003cli\u003eInternal lighting and access designed for loading, cleaning, and maintenance\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          A Class 1 design supports straightforward safety documentation and typically avoids large open-beam exclusion zones.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- UTILITIES \/ CHILLER \/ EXTRACTION --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eUtilities, chiller \u0026amp; fume extraction\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e industrial chiller and integrated fume extraction\u003c\/p\u003e\n        \u003cp\u003e\n          The utility package focuses on stability and shop environment:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eChiller circuits maintain laser and optics within recommended temperature ranges\u003c\/li\u003e\n          \u003cli\u003eExtraction captures fumes at the cutting zone and connects to your building exhaust or filtration\u003c\/li\u003e\n          \u003cli\u003eStable thermal and air conditions help ensure predictable cut behavior over long runs\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ASSIST GASES --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eAssist gases \u0026amp; strategy\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, and air (configuration dependent)\u003c\/p\u003e\n        \u003cp\u003e\n          Typical gas strategies on a 3 kW 6×12 platform include:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003e\n\u003cstrong\u003eOxygen:\u003c\/strong\u003e cost-effective cutting of mild steel with oxidized edges\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003eNitrogen:\u003c\/strong\u003e bright, oxide-free edges on stainless and aluminum, suited for cosmetic parts and weld prep\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003eDry air:\u003c\/strong\u003e cost-focused cutting where a light oxide tint is acceptable\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          We can help estimate gas usage and recommend cylinder or bulk solutions based on your duty cycle and mix.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- MOTION SYSTEM --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eMotion system \u0026amp; structure\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eMotion:\u003c\/strong\u003e servo-driven gantry with precision linear guidance\u003c\/p\u003e\n        \u003cp\u003e\n          The motion platform is tuned for:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eSmooth motion and accurate interpolation on long 6×12 paths\u003c\/li\u003e\n          \u003cli\u003eConsistent hole, slot, and contour geometry across the full working envelope\u003c\/li\u003e\n          \u003cli\u003eContinuous-duty production in multi-shift environments\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ELECTRICAL \/ FOOTPRINT --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eElectrical \u0026amp; footprint (high level)\u003c\/h4\u003e\n        \u003cp\u003e\n          Detailed footprint and connection data are provided during specification. At a high level, the system is\n          intended for:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eUS industrial 3-phase power sized for a 3 kW fiber laser and chiller\u003c\/li\u003e\n          \u003cli\u003eInstallation in fabrication bays or dedicated laser areas, with room for 6×12 sheet loading\u003c\/li\u003e\n          \u003cli\u003eRigging and floor loading typical of enclosed large-format laser machines\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Pre-installation planning focuses on access paths, clearances, and utilities to keep commissioning predictable.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cp class=\"umpro-product__note\"\u003e\n      \u003cem\u003e\n        Real-world capacity, tolerances, and throughput depend on material grade, assist gas, cut parameters, nesting\n        strategy, and quality targets. For critical jobs, we recommend qualification runs with your parts and materials\n        before finalizing production tolerances.\n      \u003c\/em\u003e\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- APPLICATIONS \/ USE CASES --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003e\n      The 3 kW, 6×12 ft Umprotech enclosed fiber laser is typically deployed as a\n      \u003cstrong\u003ecore production machine\u003c\/strong\u003e in fabrication cells and OEM lines—especially where large-format sheet\n      usage and high-mix job schedules are standard. It can operate as a standalone cell or as part of a broader\n      workflow with saws, press brakes, hardware insertion, and welding stations.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__usecases-grid\"\u003e\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003ePanels, cabinets \u0026amp; machine covers\u003c\/h4\u003e\n        \u003cp\u003e\n          Cutting large cabinet walls, access panels, machine covers, and base plates from full 6×12 sheets, with\n          features and bend lines aligned to downstream forming operations.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eFrames, brackets \u0026amp; structural sheet\u003c\/h4\u003e\n        \u003cp\u003e\n          Brackets, frames, stiffeners, and structural sheet components in steel, stainless, and aluminum, where\n          dimensional consistency supports efficient fixturing and welding.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eHVAC \u0026amp; building systems\u003c\/h4\u003e\n        \u003cp\u003e\n          Duct panels, plenums, rails, and mounting hardware cut from 6×12 stock, taking advantage of large-sheet\n          nesting to reduce scrap in HVAC and building hardware production.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eOEM component kits\u003c\/h4\u003e\n        \u003cp\u003e\n          Kit-based nests combining panels, brackets, and small plates for OEM assemblies. Programs and parameter sets\n          can be stored in the control to make repeat orders consistent and fast to set up.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eSignage \u0026amp; architectural metal\u003c\/h4\u003e\n        \u003cp\u003e\n          Large signage panels, architectural cladding, and decorative cut-outs in steel, stainless, and aluminum,\n          using 6×12 sheets for large pieces or multi-panel assemblies.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eHigh-mix \/ low-to-mid volume work\u003c\/h4\u003e\n        \u003cp\u003e\n          Job shops and contract manufacturers running frequent changeovers, mixed nests, and repeat orders where 3 kW\n          power and 6×12 sheet usage keep cycle times and material usage under control.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003ePrototyping \u0026amp; engineering changes\u003c\/h4\u003e\n        \u003cp\u003e\n          Producing prototypes or revised parts on the same platform used for steady-state production so geometry,\n          nesting, and material usage can be validated at full 6×12 scale.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eIntegration into fabrication cells\u003c\/h4\u003e\n        \u003cp\u003e\n          Placed at the front end of a fabrication cell feeding press brakes, hardware insertion, and welding, where\n          3 kW cutting and 6×12 nests supply a steady flow of blanks and kits to downstream operations.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cp\u003e\n      In many shops, the 3 kW 6×12 becomes the \u003cstrong\u003e“large-format generalist”\u003c\/strong\u003e—handling everything from\n      cabinet panels to mixed nests of smaller parts—while other lasers specialize in thicker plate, small-format work,\n      or niche materials.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- CONFIGURATIONS \u0026 OPTIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 3 kW 6×12 enclosed fiber laser is shipped as a \u003cstrong\u003eready-to-run cutting system\u003c\/strong\u003e. Core\n      elements—3 kW fiber source, auto-focus head, FSCUT control, full enclosure, extraction, and chiller—are included.\n      Configuration choices let you align the system with your preferred vendors, gas strategy, and internal standards.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFiber source options:\u003c\/strong\u003e 3 kW Raycus or 3 kW IPG, selected according to your existing fleet,\n        service preferences, or internal standards for laser sources.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAssist gas configuration:\u003c\/strong\u003e support for N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, and air\n        (configuration dependent). We can help size regulators, piping, and supply strategies for your cut mix and\n        duty cycle.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eControl stack:\u003c\/strong\u003e FSCUT controller with CypCut CAM\/nesting as standard—no separate flat-sheet CAM\n        license needed for core operations.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e standard configuration, with parameter libraries structured by\n        material and thickness for everyday operation.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFull-cover enclosure \u0026amp; extraction:\u003c\/strong\u003e included to simplify safety and fume projects around\n        the machine installation.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIndustrial chiller:\u003c\/strong\u003e sized for 3 kW duty, supporting stable operation over multi-shift\n        production.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eNetwork \u0026amp; job management:\u003c\/strong\u003e support for network-based file transfer and shared job\n        directories, integrating the laser into your CAD\/ERP workflow.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegration \u0026amp; automation support:\u003c\/strong\u003e guidance for integrating the 6×12 platform into existing\n        cells, or planning future upgrades such as load\/unload aids or basic automation.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp\u003e\n      For special requirements—such as unique alloys, internal OEM standards, or defined cell concepts—we can work with\n      your engineering and operations teams to recommend a configuration that fits both current needs and future growth.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- IMPLEMENTATION \u0026 SUPPORT --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003e\n      We support US job shops, OEMs, and integrators from evaluation through commissioning and ramp-up, focusing on\n      \u003cstrong\u003ereal parts, realistic cycle times, and sustainable processes\u003c\/strong\u003e, rather than only nameplate power.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePre-installation planning:\u003c\/strong\u003e review of power capacity, floor layout, rigging paths,\n        gas infrastructure (N\u003csub\u003e2\u003c\/sub\u003e\/O\u003csub\u003e2\u003c\/sub\u003e\/air), and exhaust routing, so site prep is clear before\n        shipment.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePart \u0026amp; material review:\u003c\/strong\u003e analysis of representative parts, material types, and thickness\n        ranges to confirm that a 3 kW 6×12 configuration matches your workload and performance targets.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eCypCut workflow setup:\u003c\/strong\u003e assistance with nesting rules, layer conventions, micro-joint and\n        lead-in strategies, and parameter libraries aligned with your products.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOperator \u0026amp; maintenance training:\u003c\/strong\u003e training on safe operation, startup\/shutdown, alarm\n        handling, and routine maintenance such as nozzle and lens care, filter checks, and simple adjustments.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOngoing process support:\u003c\/strong\u003e help with new materials, quality improvements, and cycle-time\n        optimization as more work is moved onto the 3 kW 6×12 cell.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp class=\"umpro-product__cta\"\u003e\n      \u003cstrong\u003eNext step:\u003c\/strong\u003e send representative part files (DXF\/STEP\/PDF) and your material\/thickness ranges.\n      We’ll review fit, estimate cycle times, and recommend a 3 kW 6×12 configuration and assist-gas strategy tailored\n      to your workflow and ROI targets.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- TECHNICAL FAQ --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--faq umpro-product-faq\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eTechnical FAQ – 3 kW · 6×12 ft enclosed fiber laser\u003c\/h3\u003e\n\n    \u003cdiv class=\"umpro-product-faq__grid\"\u003e\n      \u003c!-- FAQ 1 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          When does a 3 kW 6×12 system make more sense than 2 kW or 6 kW?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            A 3 kW 6×12 system fits when you:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003ePrimarily cut thin and mid-gauge sheet, with occasional heavier jobs\u003c\/li\u003e\n            \u003cli\u003eWant more throughput and process margin than 2 kW without the cost\/utility jump to 6 kW\u003c\/li\u003e\n            \u003cli\u003eValue large-format 6×12 nesting and material efficiency more than maximum possible cutting speed\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            If your mix is mostly light-gauge and volumes are moderate, 2 kW might be sufficient. If thick plate and\n            extreme throughput dominate, 6 kW or more may be justified. For many shops, 3 kW strikes a strong\n            balance between capability and cost.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 2 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What thickness range is realistic on a 3 kW 6×12 platform?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            3 kW is well suited to \u003cstrong\u003ethin and mid-gauge materials\u003c\/strong\u003e commonly used in fabrication and OEM\n            work. Practical limits depend on:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eMaterial (mild steel, high-strength steel, stainless, aluminum, brass)\u003c\/li\u003e\n            \u003cli\u003eAssist gas (N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, or air) and available pressure\u003c\/li\u003e\n            \u003cli\u003eRequired edge quality (cosmetic, weld-prep, or to-be-machined)\u003c\/li\u003e\n            \u003cli\u003eTarget cycle times and job volumes\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We recommend validating your key material\/thickness combinations with sample cuts and tuned parameters\n            before finalizing specs and quoting based on 3 kW cycle times.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 3 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Why choose a 6×12 ft bed instead of 5×10 or 4×8?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            A 6×12 platform is ideal if you:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eAlready source 72×144\" sheets or design large panels and cabinets\u003c\/li\u003e\n            \u003cli\u003eBenefit from higher parts-per-sheet and fewer offcuts\u003c\/li\u003e\n            \u003cli\u003eNeed flexibility to nest large parts and smaller components together\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            If your material standards are already aligned with 6×12 stock, this bed size maximizes the value of those\n            sheets and reduces cutting and handling overhead across many jobs.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 4 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Is CypCut enough for high-mix production on a 3 kW 6×12 system?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Yes. For flat-sheet cutting, \u003cstrong\u003eCypCut is typically the primary CAM and nesting environment\u003c\/strong\u003e.\n            It offers:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eAutomatic and manual nesting on 6×12 sheets and remnants\u003c\/li\u003e\n            \u003cli\u003eControl over lead-ins, micro joints, and cut sequence (important on large nests)\u003c\/li\u003e\n            \u003cli\u003eSimulation and visual verification before starting production\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Many operations add external tools for quoting or scheduling, but the cutting programs themselves are\n            usually created and maintained in CypCut.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 5 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What facility requirements should we plan for a 3 kW 6×12 installation?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Compared to higher-power systems, a 3 kW platform is moderate on utilities, but you should still plan for:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003e3-phase power sized for the laser, chiller, and motion\/control hardware\u003c\/li\u003e\n            \u003cli\u003eAssist gas storage and pressure appropriate for your material mix and duty cycle\u003c\/li\u003e\n            \u003cli\u003eExhaust or filtration capacity connected to the integrated fume extraction\u003c\/li\u003e\n            \u003cli\u003eFloor space, clearances, and rigging routes for 6×12 sheet handling and enclosure placement\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            These requirements are detailed in pre-install documentation and reviewed with you during planning.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 6 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How complex is operator training on FSCUT + CypCut for this 3 kW platform?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Operators with CNC, CAD, or fabrication experience typically adapt quickly. Training focuses on:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eSafe operation, interlock behavior, and daily checks\u003c\/li\u003e\n            \u003cli\u003eLoading nests, selecting materials, and managing parameter sets\u003c\/li\u003e\n            \u003cli\u003eResponding to alarms, interpreting basic diagnostics, and performing simple maintenance\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Parameter libraries and graphical nests help shorten the learning curve and maintain consistency across shifts.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 7 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What does routine maintenance look like on a 3 kW 6×12 system?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Routine maintenance is centered on optics, gas systems, and mechanical checks. Typical recurring tasks include:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eInspecting and cleaning or replacing nozzles and protective lenses\u003c\/li\u003e\n            \u003cli\u003eChecking assist gas filters, regulators, hoses, and fittings for contamination or leaks\u003c\/li\u003e\n            \u003cli\u003eMonitoring chiller fluid levels, temperature setpoints, and alarm history\u003c\/li\u003e\n            \u003cli\u003eCleaning the cutting area and visually inspecting motion components and cable tracks\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We provide maintenance schedules and checklists, and training covers how to perform these tasks safely\n            and effectively.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 8 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How does the Class 1 enclosure impact safety and layout in our shop?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            The fully enclosed Class 1 design simplifies laser safety management:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eLaser hazards are largely contained within the enclosure under normal operation\u003c\/li\u003e\n            \u003cli\u003eOperators typically do not need dedicated laser eyewear outside the machine during standard cutting\u003c\/li\u003e\n            \u003cli\u003eSafety planning can focus on interlocks, procedures, and loading\/unloading zones\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            This can make it easier to co-locate the laser with press brakes, weld cells, and assembly stations in the\n            same bay.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 9 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Can the 3 kW 6×12 cell integrate with our existing CAD\/ERP\/MRP workflow?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Yes. A typical integration pattern is:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eEngineering maintains geometry and revision control in your CAD and PLM tools\u003c\/li\u003e\n            \u003cli\u003eFlat patterns are exported as DXF\/STEP with naming aligned to ERP\/MRP part numbers\u003c\/li\u003e\n            \u003cli\u003eCypCut imports these files for nesting, parameter assignment, and simulation\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We can help define folder structures, naming conventions, and job-release steps so that engineering,\n            planning, and the laser cell operate from a shared source of truth.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 10 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How do we know if a 3 kW 6×12 configuration is the right fit for our shop?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            The decision should be based on your \u003cstrong\u003eactual part mix and bottlenecks\u003c\/strong\u003e. We usually work\n            through:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eMaterial and thickness distributions across your current and projected workload\u003c\/li\u003e\n            \u003cli\u003eTypical part geometries and required edge-quality\/tolerance targets\u003c\/li\u003e\n            \u003cli\u003eCurrent constraints in cutting, forming, welding, and assembly\u003c\/li\u003e\n            \u003cli\u003eROI estimates comparing 3 kW 6×12 to smaller tables or higher-power alternatives\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Using your real parts and volume assumptions, we can recommend whether a 3 kW 6×12 should be your primary\n            large-format machine, part of a multi-laser strategy, or a stepping stone toward future capacity expansion.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n    \u003c\/div\u003e\n\n    \u003cp class=\"umpro-product-faq__closing\"\u003e\n      \u003cstrong\u003eStill evaluating 3 kW on a 6×12 platform?\u003c\/strong\u003e Share sample part files and your materials\/thickness\n      ranges. We’ll provide a targeted assessment and configuration recommendation for your 3 kW 6×12 enclosed fiber\n      laser cell.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e\n","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966015861102,"sku":"UFL-6x12-3KW-ENC","price":149900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-12kw-enclosed-fiber-laser-cutter-6x20ft-fscut-5723155.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-6kw-6x12ft","title":"Umprotech Enclosed Fiber Laser Cutter 6kW 6x12ft FSCUT","description":"\u003csection class=\"umpro-product umpro-product--flagship\"\u003e\u003c!-- HERO \/ OVERVIEW --\u003e\u003cheader class=\"umpro-product__hero\"\u003e\n\u003cp class=\"umpro-product__eyebrow\"\u003eEnclosed Fiber Laser Cutting Cell · High-Power 6×12 Platform\u003c\/p\u003e\n\u003ch2 class=\"umpro-product__title\"\u003eUmprotech Enclosed Fiber Laser Cutter – 6 kW · 6×12 ft · FSCUT \/ CypCut\u003c\/h2\u003e\n\u003cp class=\"umpro-product__subtitle\"\u003eA fully enclosed, \u003cstrong\u003eproduction-grade 6 kW fiber laser system\u003c\/strong\u003e on a \u003cstrong\u003e6×12 ft (72×144\") bed\u003c\/strong\u003e, engineered for US job shops, OEMs, and fabrication cells that need \u003cstrong\u003ehigh-throughput cutting of large-format sheets\u003c\/strong\u003e in steel, stainless, aluminum, and brass. Combining a 6 kW Raycus or IPG source with FSCUT industrial control and CypCut CAM\/nesting, this system is built for \u003cstrong\u003euptime, repeatable quality, and efficient part flow\u003c\/strong\u003e in demanding mixed-metal environments.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__hero-grid\"\u003e\n\u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber (Raycus \/ IPG) · \u003cstrong\u003eBed size:\u003c\/strong\u003e 6×12 ft (72×144\") · \u003cstrong\u003eController:\u003c\/strong\u003e FSCUT with CypCut CAM \/ nesting\u003c\/p\u003e\n\u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 · \u003cstrong\u003eHead:\u003c\/strong\u003e Auto-focus fiber cutting head · \u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e \/ O\u003csub\u003e2\u003c\/sub\u003e \/ air (configuration dependent)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"umpro-product__hero-points\"\u003e\n\u003cli\u003e6 kW fiber power for high-speed cutting on thin, mid-gauge, and selected thick materials\u003c\/li\u003e\n\u003cli\u003eLarge 6×12 ft format for high-yield nesting, large panels, and long parts\u003c\/li\u003e\n\u003cli\u003eClass 1 fully enclosed cell with integrated fume extraction and industrial chiller\u003c\/li\u003e\n\u003cli\u003eFSCUT controller with CypCut for intelligent nesting, simulation, and diagnostics\u003c\/li\u003e\n\u003cli\u003eEngineered for multi-shift production, uptime, and low rework rates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/header\u003e\u003c!-- POSITIONING \/ VALUE FOR US BUYERS --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 6 kW, 6×12 ft enclosed fiber laser is designed as a \u003cstrong\u003ehigh-power, large-format production engine\u003c\/strong\u003e for shops that rely on laser cutting as a core throughput constraint. It’s aimed at operations where \u003cstrong\u003ecycle time, full-sheet utilization, and repeatable quality\u003c\/strong\u003e across a wide thickness range directly influence output, margins, and delivery reliability.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 kW fiber laser (Raycus \/ IPG):\u003c\/strong\u003e provides the power needed for high-speed cutting on thin and mid-gauge sheets and extends into solid thick-plate capability on mild steel, stainless, and aluminum. Compared to 2–3 kW systems, 6 kW significantly shortens pierce times and linear cutting times on many gauges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge 6×12 ft (72×144\") bed:\u003c\/strong\u003e accommodates full-size 6×12 sheets used in heavy fabrication, machinery, and architectural work. Enables high part density, kit-based nesting, and large panels or long profiles without re-positioning or multiple setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-cover, Class 1 enclosure:\u003c\/strong\u003e light-tight, interlocked housing with viewing windows and internal lighting. Helps contain process light and a significant portion of fume, simplifying safety audits and laser zoning in busy shop environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e automatically adapts focus to material thickness and moderate sheet warp across the full 6×12 envelope. Supports consistent kerf width, edge quality, and pierce behavior on mixed nests and stacked jobs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFSCUT controller with CypCut CAM:\u003c\/strong\u003e widely adopted industrial control stack for flat-sheet lasers. Offers intelligent nesting, micro-joint and common-line control, advanced lead-in\/out strategies, and simulation—reducing scrap, programming time, and setup uncertainty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated fume extraction \u0026amp; industrial chiller:\u003c\/strong\u003e supplied as part of the system, not as separate projects. Stable cooling and fume handling are critical for sustaining 6 kW output and protecting optics and electronics over multi-shift production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixed-metal production capability:\u003c\/strong\u003e supports carbon steel, stainless, aluminum, and brass within defined thickness ranges. Assist gas strategies can be tuned for weld-ready edges, cosmetic parts, or cost-focused cutting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for uptime \u0026amp; integration:\u003c\/strong\u003e suited as the primary cutting asset in cells feeding press brakes, panel benders, robotic welding, and assembly lines where laser output drives overall part flow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003c!-- PERFORMANCE OVERVIEW --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--performance\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003ePerformance: 6 kW power · 6×12 ft full-sheet capacity\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003e6 kW fiber source\u003c\/strong\u003e on a \u003cstrong\u003e6×12 ft bed\u003c\/strong\u003e is tuned for fabrication shops and OEMs where cutting speed, reliable pierce performance, and full-sheet nesting all matter. It provides a strong compromise between ultra high-power (8–12 kW) and mid-power (2–3 kW) systems, offering robust performance on both thinner gauges and demanding thicker jobs.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__metrics-grid\"\u003e\n\u003cdiv class=\"umpro-product__metric\"\u003e\n\u003cp class=\"umpro-product__metric-label\"\u003eTypical material coverage*\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon\/mild steel: thin sheet through demanding mid-to-thick plate (application dependent)\u003c\/li\u003e\n\u003cli\u003eStainless steel: thin and mid-gauge plus selected thicker sections with tuned parameters\u003c\/li\u003e\n\u003cli\u003eAluminum: a wide range of panel and plate thicknesses used in frames, enclosures, and structural parts\u003c\/li\u003e\n\u003cli\u003eBrass and copper alloys: defined thickness ranges supported with appropriate assist gas and parameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__metric-note\"\u003e*Exact thickness limits depend on alloy, assist gas, nozzle, cut parameters, and edge-quality requirements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__metric\"\u003e\n\u003cp class=\"umpro-product__metric-label\"\u003eThroughput characteristics*\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSubstantial speed gains over 2–3 kW systems in many gauge ranges\u003c\/li\u003e\n\u003cli\u003eShorter pierce times and stronger cut-through behavior in thicker materials\u003c\/li\u003e\n\u003cli\u003eHigh part counts per sheet thanks to the 6×12 nesting area and 6 kW cut speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__metric-note\"\u003e*Best evaluated with your actual nests and thickness mix under realistic gas and duty-cycle conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__metric\"\u003e\n\u003cp class=\"umpro-product__metric-label\"\u003eQuality \u0026amp; repeatability*\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEdge quality suitable for welding, coating, or light machining with tuned process windows\u003c\/li\u003e\n\u003cli\u003eStable cut quality across full-sheet nests and repeat jobs with defined parameter libraries\u003c\/li\u003e\n\u003cli\u003eCapability to standardize results across shifts via FSCUT\/CypCut recipes and checklists\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__metric-note\"\u003e*Critical tolerances and finish should be validated via sample cutting on your material and fixtures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c!-- DETAILED TECHNICAL SPECIFICATIONS --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n\u003cp\u003eThe 6 kW 6×12 Umprotech enclosed fiber laser is delivered as a \u003cstrong\u003ecomplete cutting cell\u003c\/strong\u003e. The fiber source, motion system, auto-focus head, control hardware\/software, enclosure, extraction, and chiller are engineered to work together when installed according to specification.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__specs-grid\"\u003e\n\u003c!-- LASER SOURCE --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eLaser power \u0026amp; source\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber (Raycus or IPG)\u003c\/p\u003e\n\u003cp\u003e6 kW is a \u003cstrong\u003ehigh-power configuration\u003c\/strong\u003e targeting operations where:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eLaser cutting is a primary throughput constraint in the fabrication flow\u003c\/li\u003e\n\u003cli\u003eBoth thin sheet and mid-to-thick plate are regularly processed on the same machine\u003c\/li\u003e\n\u003cli\u003eCycle-time reductions versus mid-power platforms translate directly into added capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRaycus and IPG fiber sources are widely used in production environments, providing stable output and recognized service and support networks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- WORKING ENVELOPE --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eWorking envelope\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eBed size \/ stroke:\u003c\/strong\u003e 6×12 ft (72×144\") nominal working area\u003c\/p\u003e\n\u003cp\u003eThe 6×12 format is chosen for:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eLarge panels, cabinets, and frames cut from full-size 6×12 sheets\u003c\/li\u003e\n\u003cli\u003eHigh-density nests of smaller parts, kits, and brackets for contract manufacturing\u003c\/li\u003e\n\u003cli\u003eReduced skeleton and offcut handling versus smaller sheet formats\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRemnants can be defined as custom sheet sizes in CypCut to maximize material utilization across jobs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- CONTROLLER \/ CAM --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eController \u0026amp; CAM \/ nesting\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eControl:\u003c\/strong\u003e FSCUT industrial motion and laser controller\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSoftware:\u003c\/strong\u003e CypCut CAM \/ nesting\u003c\/p\u003e\n\u003cp\u003eFSCUT + CypCut provide an end-to-end programming environment tuned for high-power flat-sheet cutting:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eDXF\/STEP import from your CAD system\u003c\/li\u003e\n\u003cli\u003eAutomatic and manual nesting on full 6×12 sheets and remnant sizes\u003c\/li\u003e\n\u003cli\u003eLead-in\/lead-out optimization, micro-joints, corner smoothing, and sequence control\u003c\/li\u003e\n\u003cli\u003eCommon-line cutting and bridging to reduce pierces and cycle time\u003c\/li\u003e\n\u003cli\u003eSimulation and on-screen preview of nests and toolpaths prior to cutting\u003c\/li\u003e\n\u003cli\u003eDiagnostic tools linked to I\/O, alarms, and motion\/laser status\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause the control stack is widely used, operators can often leverage prior FSCUT\/CypCut experience, shortening training time.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- CUTTING HEAD --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eCutting head \u0026amp; auto-focus\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Auto-focus fiber cutting head with capacitive height sensing\u003c\/p\u003e\n\u003cp\u003eOn a 6 kW platform, the cutting head is critical for reliability and edge quality. The auto-focus design:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eAdjusts focal position for different material thicknesses and alloys\u003c\/li\u003e\n\u003cli\u003eMaintains consistent standoff distance across the 6×12 working area, even with moderate sheet warp\u003c\/li\u003e\n\u003cli\u003eReduces manual focus adjustments and supports mixed nests across multiple gauges\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eParameter libraries in CypCut tie focus, gas pressure, and speed to each material\/thickness combination for repeatable results.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ENCLOSURE \/ SAFETY --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eEnclosure \u0026amp; safety\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 light-tight housing with interlocks\u003c\/p\u003e\n\u003cp\u003eThe enclosure is engineered for high-power operation in shared production spaces:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eInterlocked doors that stop cutting when opened or not fully closed\u003c\/li\u003e\n\u003cli\u003eViewing windows for visual confirmation of pierce and cut behavior\u003c\/li\u003e\n\u003cli\u003eInternal lighting and access points for setup, loading, and cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eClass 1 design simplifies safety reviews and usually reduces the need for large exclusion zones around the machine.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- UTILITIES \/ CHILLER \/ EXTRACTION --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eUtilities, chiller \u0026amp; fume extraction\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e industrial chiller and integrated fume extraction system\u003c\/p\u003e\n\u003cp\u003eAt 6 kW, stable cooling and fume management are essential:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eChiller circuits for the laser source and optics maintain temperature within specified ranges\u003c\/li\u003e\n\u003cli\u003eExtraction hoods capture fumes at the cutting area and route them to your plant exhaust\/filtration\u003c\/li\u003e\n\u003cli\u003eStable thermal and air conditions support consistent cut quality and machine longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!-- ASSIST GASES --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eAssist gases \u0026amp; process strategy\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, and air (configuration dependent)\u003c\/p\u003e\n\u003cp\u003eTypical gas use patterns on a 6 kW system:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOxygen:\u003c\/strong\u003e high-speed cutting of mild steel with oxidized edges; often used for thicker sections where throughput is a priority.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNitrogen:\u003c\/strong\u003e bright, oxide-free edges on stainless and aluminum, and carbon steel where weld-ready or cosmetic edges are required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry air:\u003c\/strong\u003e cost-focused option where a light oxide tint is acceptable, with careful tuning of parameters and drying\/filtration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e6 kW systems can have significant gas consumption; we can help size cylinders, bulk tanks, or compressor systems based on duty cycle and material mix.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- MOTION SYSTEM --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eMotion system \u0026amp; structure\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eMotion:\u003c\/strong\u003e servo-driven gantry with precision linear guidance\u003c\/p\u003e\n\u003cp\u003eThe motion platform is tuned to exploit 6 kW cutting speeds without sacrificing part accuracy:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eSmooth interpolation on long 6×12 paths and complex geometries\u003c\/li\u003e\n\u003cli\u003eConsistent hole and profile geometry across full-sheet nests\u003c\/li\u003e\n\u003cli\u003eRobust performance for continuous-duty job-shop and OEM environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!-- ELECTRICAL \/ FOOTPRINT --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eElectrical \u0026amp; footprint (high level)\u003c\/h4\u003e\n\u003cp\u003eDetailed drawings and electrical specifications are provided during the quoting and planning phase. In general, the system is intended for:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eUS industrial 3-phase power sized for a 6 kW laser, chiller, and motion\/control hardware\u003c\/li\u003e\n\u003cli\u003eInstallation in fabrication bays or dedicated laser areas with space for 6×12 sheet handling\u003c\/li\u003e\n\u003cli\u003eRigging paths and floor loading typical of large-format enclosed high-power lasers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePre-install planning focuses on power, access, and layout so commissioning can focus on actual parts and parameters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"umpro-product__note\"\u003e\u003cem\u003e Practical cutting capacity, tolerances, and throughput depend on alloy, assist gas, nozzle selection, nesting strategy, and edge-quality expectations. For critical work, we recommend qualification runs and agreed parameter windows before committing to production tolerances and cycle-time promises. \u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- APPLICATIONS \/ USE CASES --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n\u003cp\u003eThe 6 kW, 6×12 ft Umprotech enclosed fiber laser is typically deployed as a \u003cstrong\u003ehigh-throughput large-format production cell\u003c\/strong\u003e in fabrication shops, OEM plants, and contract manufacturers. It can run as a standalone cutting station or be integrated with forming, machining, and welding steps in a tightly coupled workflow.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__usecases-grid\"\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eLarge panels \u0026amp; cabinets\u003c\/h4\u003e\n\u003cp\u003eCutting large machine panels, cabinet sides, base plates, and access covers from full 6×12 sheets for machinery, enclosures, and architectural systems, with bend lines and features matched to downstream forming.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eFrames, brackets \u0026amp; structural components\u003c\/h4\u003e\n\u003cp\u003eHigh-speed cutting of frames, gussets, stiffeners, and structural sheet elements in steel, stainless, and aluminum, where 6 kW power and 6×12 nesting combine to support demanding part flows.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eHVAC \u0026amp; building systems\u003c\/h4\u003e\n\u003cp\u003eProduction of large-format duct panels, plenums, rails, and brackets with high sheet utilization and strong cut quality, suitable for bending and on-site installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eOEM component kits \u0026amp; assemblies\u003c\/h4\u003e\n\u003cp\u003eKit-based nesting for OEM assemblies: combining panels, brackets, and small hardware plates on the same 6×12 sheet. 6 kW power keeps cycle times compatible with downstream robotic welding and high-throughput assembly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eSignage \u0026amp; architectural metalwork\u003c\/h4\u003e\n\u003cp\u003eCutting large signage, architectural screens, and decorative panels in steel, stainless, and aluminum, where a 6×12 format allows big pieces or multi-panel layouts with minimal splicing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eHigh-mix \/ high-throughput job-shop work\u003c\/h4\u003e\n\u003cp\u003eContract manufacturing and job shops running mixed nests, frequent changeovers, and repeat orders, where 6 kW power and 6×12 sheet usage help keep lead times and material waste under control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003ePrototyping \u0026amp; pilot production on production hardware\u003c\/h4\u003e\n\u003cp\u003eEngineering teams validate designs, nests, and material strategies on the same 6 kW platform used for full-scale production, reducing risk when shifting from prototypes to volume jobs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eIntegration into automated cells\u003c\/h4\u003e\n\u003cp\u003eServes as the cutting front-end of an automated fabrication cell with load\/unload systems, towers, press brakes, and robotic welding where high cut speed and large-sheet nesting help prevent the laser from becoming a bottleneck.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eIn many operations, the 6 kW 6×12 cell becomes the \u003cstrong\u003eprimary large-format production asset\u003c\/strong\u003e, with lower-power or smaller-bed machines handling prototypes, niche materials, or specialized work.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- CONFIGURATIONS \u0026 OPTIONS --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 6 kW 6×12 enclosed fiber laser is supplied as a \u003cstrong\u003eready-to-run production platform\u003c\/strong\u003e. All core systems—fiber source, auto-focus head, FSCUT control, full enclosure, fume extraction, and chiller—are included. Configuration options allow alignment with your material mix, gas strategy, and internal standards.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber source options:\u003c\/strong\u003e 6 kW Raycus or 6 kW IPG, chosen based on installed base, preferred service partners, and corporate standards for laser sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssist gas configuration:\u003c\/strong\u003e support for N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, and air (configuration dependent). We can help specify gas storage, pressure, and piping for 6 kW duty cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl stack:\u003c\/strong\u003e FSCUT controller with CypCut CAM\/nesting as standard—no separate flat-sheet CAM purchase is required for core programming and simulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e included as standard, with CypCut parameter libraries organized by material and thickness to simplify daily operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-cover enclosure \u0026amp; fume extraction:\u003c\/strong\u003e integrated solution to minimize engineering time around guarding and air handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial chiller:\u003c\/strong\u003e sized for 6 kW operation, supporting stable performance in continuous production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork \u0026amp; file integration:\u003c\/strong\u003e support for network-based job transfer, shared folders, and integration into CAD\/ERP workflows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomation \u0026amp; integration support:\u003c\/strong\u003e guidance for connection to material towers, load\/unload systems, conveyors, or robotic cells surrounding the 6×12 platform.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor specialized requirements—unique alloys, internal OEM standards, or specific cell concepts—we can collaborate with your engineering and operations teams to define recommended configurations and workflows around the 6 kW 6×12 cell.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- IMPLEMENTATION \u0026 SUPPORT --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n\u003cp\u003eIntegrating a \u003cstrong\u003e6 kW 6×12 fiber laser\u003c\/strong\u003e is a strategic decision. We support US job shops, OEMs, and integrators from early evaluation through installation and ramp-up, focusing on \u003cstrong\u003ereal parts, realistic cycle times, and sustainable processes\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-installation planning:\u003c\/strong\u003e review of power capacity, exhaust routing, gas supply (N\u003csub\u003e2\u003c\/sub\u003e\/O\u003csub\u003e2\u003c\/sub\u003e\/air), floor layout, and rigging routes so that site preparation is clear before the machine ships.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart \u0026amp; material review:\u003c\/strong\u003e evaluation of representative parts, materials, and thickness ranges to confirm that a 6 kW 6×12 configuration is appropriately sized for your workload and growth plans.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCypCut workflow setup:\u003c\/strong\u003e assistance with nesting strategies, layer conventions, micro-joint and lead-in rules, and parameter library structure tuned to your alloys and thicknesses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator \u0026amp; maintenance training:\u003c\/strong\u003e onsite or remote training covering safe operation, startup\/shutdown, daily checks, basic troubleshooting, and routine maintenance (nozzles, lenses, filters, cleaning).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOngoing process support:\u003c\/strong\u003e support for new materials, cut-quality optimization, cycle-time improvements, and integration questions as you move more work onto the 6 kW cell.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__cta\"\u003e\u003cstrong\u003eNext step:\u003c\/strong\u003e send representative part files (DXF\/STEP\/PDF) and your material\/thickness ranges. We’ll review fit, estimate cycle times, and recommend a 6 kW 6×12 configuration and assist-gas strategy aligned with your production and ROI targets.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- TECHNICAL FAQ --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--faq umpro-product-faq\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eTechnical FAQ – 6 kW · 6×12 ft enclosed fiber laser\u003c\/h3\u003e\n\u003cdiv class=\"umpro-product-faq__grid\"\u003e\n\u003c!-- FAQ 1 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhen does a 6 kW 6×12 system make more sense than 3 kW or 12 kW?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eA 6 kW 6×12 system is a strong fit when you:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eCut both thin sheet and mid-to-thick material as part of your regular workload\u003c\/li\u003e\n\u003cli\u003eNeed clear throughput gains over 2–3 kW platforms but don’t require full 12 kW capability\u003c\/li\u003e\n\u003cli\u003eWant to balance cutting speed, operating cost, and infrastructure demands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf most work is thin and volumes are moderate, 2–3 kW may be sufficient. If very thick plate and maximum throughput dominate, 12 kW could be justified. For many shops, 6 kW is a strong middle ground.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 2 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhat thickness range is realistic on a 6 kW 6×12 platform?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003e6 kW comfortably covers \u003cstrong\u003ethin and mid-gauge materials\u003c\/strong\u003e and extends into thicker plate in carbon steel, stainless, and aluminum. The exact range depends on:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eMaterial type and alloy (mild vs high-strength steel vs stainless vs aluminum)\u003c\/li\u003e\n\u003cli\u003eAssist gas (N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, air) and available pressure\u003c\/li\u003e\n\u003cli\u003eDesired edge quality (cosmetic, weld-ready, or to-be-machined)\u003c\/li\u003e\n\u003cli\u003eRequired cycle times and expected duty cycle on thicker jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe recommend validating your key thickness ranges with sample cuts and tuned parameters before finalizing production specs and customer commitments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 3 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow does 6 kW power affect assist gas consumption and operating costs?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eAt 6 kW, assist gas flow rates and pressures often increase compared to 2–3 kW, especially on thick or high-speed cuts. However, cycle times usually drop, so:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eGas usage per minute may rise, but gas usage per part can fall due to shorter cuts\u003c\/li\u003e\n\u003cli\u003eBulk gas or optimized cylinder arrangements become more attractive at higher utilization\u003c\/li\u003e\n\u003cli\u003eWell-tuned parameters are essential to balance gas costs, edge quality, and consumable life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe can help estimate gas cost per part and suggest supply strategies based on your part mix and duty cycle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 4 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow does CypCut handle nesting and remnant management on 6×12 sheets?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eCypCut is well suited to large-format sheet strategies. It supports:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eAutomatic and interactive nesting on full 6×12 sheets\u003c\/li\u003e\n\u003cli\u003eDefinition and reuse of remnant sheet sizes\u003c\/li\u003e\n\u003cli\u003eSkeleton and common-line strategies to reduce scrap and pierces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDuring implementation, we can help define nesting rules and naming conventions that make it easy to reuse remnants and track sheet utilization across jobs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 5 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhat facility requirements should we plan for a 6 kW 6×12 installation?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eA 6 kW platform has higher utility demands than low-power systems. You should plan for:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eAppropriate 3-phase power capacity for laser, chiller, and motion\/control loads\u003c\/li\u003e\n\u003cli\u003eAssist gas storage and pressure rated for 6 kW duty (cylinders or bulk supply)\u003c\/li\u003e\n\u003cli\u003eExhaust or filtration sized for fume generation from high-speed, high-energy cuts\u003c\/li\u003e\n\u003cli\u003eFloor space, rigging paths, and clearances compatible with a 6×12 enclosed laser\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese details are covered in pre-install documentation and reviewed jointly during planning.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 6 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow complex is operator training on a 6 kW FSCUT + CypCut system?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eOperators with prior CNC, laser, or fabrication experience typically adapt quickly. Training emphasizes:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eSafe operation of a 6 kW system and understanding interlocks and safety states\u003c\/li\u003e\n\u003cli\u003eLoading nests, selecting materials and thickness libraries, and making controlled parameter adjustments\u003c\/li\u003e\n\u003cli\u003eResponding to alarms, interpreting diagnostics, and performing basic maintenance and inspection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eParameter libraries, visual nests, and clear procedures help maintain consistency across shifts and operators.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 7 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhat does routine maintenance look like on a 6 kW system, and how critical is it?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eAt 6 kW, routine maintenance is especially important to keep optics clean and processes stable. Typical tasks include:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eRoutine inspection and cleaning\/replacement of nozzles and protective windows\u003c\/li\u003e\n\u003cli\u003eChecking assist gas filters, hoses, and fittings for contamination and leaks\u003c\/li\u003e\n\u003cli\u003eMonitoring chiller operation, fluid levels, and alarm logs\u003c\/li\u003e\n\u003cli\u003eCleaning the cutting area, removing slag, and inspecting motion components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe provide maintenance schedules and checklists, and training covers how to perform these tasks safely and systematically.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 8 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow does the Class 1 enclosure affect safety programs and shop layout?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eThe Class 1 enclosure is designed to contain the beam and process light under normal operation, which:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eHelps confine laser hazards largely to the enclosure and loading\/unloading zones\u003c\/li\u003e\n\u003cli\u003eTypically avoids the need for broad-area laser eyewear in the surrounding shop\u003c\/li\u003e\n\u003cli\u003eShifts safety emphasis towards interlocks, lockout\/tagout, and procedural controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis can simplify placement of the machine near press brakes, welding cells, and assembly areas within the same fabrication bay.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 9 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eCan the 6 kW 6×12 system integrate with our existing CAD\/ERP\/MES workflow?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eYes. Integration typically looks like:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eGeometry and BOM data maintained in your existing CAD and ERP\/MRP tools\u003c\/li\u003e\n\u003cli\u003eFlat patterns exported as DXF\/STEP with naming that matches part numbers and revisions\u003c\/li\u003e\n\u003cli\u003eCypCut importing those files for nesting, parameter assignment, and job simulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe can help define folder structures, naming conventions, and job-release steps so that engineering, planning, and the laser cell are synchronized.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 10 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow do we determine if a 6 kW 6×12 configuration is the right investment for our shop?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eThe best approach is to evaluate your \u003cstrong\u003eactual parts, volumes, and bottlenecks\u003c\/strong\u003e. We typically analyze:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eYour material and thickness distribution across key product families\u003c\/li\u003e\n\u003cli\u003ePart geometries, edge-quality requirements, and tolerances\u003c\/li\u003e\n\u003cli\u003eCurrent constraints in cutting, forming, welding, and assembly\u003c\/li\u003e\n\u003cli\u003eExpected utilization and ROI versus lower-power and higher-power alternatives\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUsing your real data, we can recommend whether a 6 kW 6×12 system should be your primary cutting platform, part of a multi-laser strategy, or a staged upgrade in your broader capacity plan.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c\/div\u003e\n\u003cp class=\"umpro-product-faq__closing\"\u003e\u003cstrong\u003eStill evaluating 6 kW on a 6×12 platform?\u003c\/strong\u003e Share representative part files and your material\/thickness mix. We’ll prepare a targeted assessment and configuration recommendation for your 6 kW 6×12 enclosed fiber laser cell.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966015893870,"sku":"UFL-6x12-6KW-ENC","price":189900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-12kw-enclosed-fiber-laser-cutter-6x20ft-fscut-5723155.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-12kw-6x12ft","title":"Umprotech 12kW Enclosed Fiber Laser Cutter, 6x12 ft, FSCUT","description":"\u003csection class=\"umpro-product umpro-product--flagship\"\u003e\u003c!-- HERO \/ OVERVIEW --\u003e\u003cheader class=\"umpro-product__hero\"\u003e\n\u003cp class=\"umpro-product__eyebrow\"\u003eEnclosed Fiber Laser Cutting Cell · Ultra High-Power 6×12 Platform\u003c\/p\u003e\n\u003ch2 class=\"umpro-product__title\"\u003eUmprotech Enclosed Fiber Laser Cutter – 12 kW · 6×12 ft · FSCUT \/ CypCut\u003c\/h2\u003e\n\u003cp class=\"umpro-product__subtitle\"\u003eA fully enclosed, \u003cstrong\u003eultra high-power 12 kW fiber laser cutting system\u003c\/strong\u003e on a \u003cstrong\u003e6×12 ft (72×144″) bed\u003c\/strong\u003e, built for US job shops, OEMs, and fabrication cells where \u003cstrong\u003elaser throughput is a primary bottleneck\u003c\/strong\u003e. Combining a 12 kW Raycus or IPG fiber source, FSCUT industrial motion control, and CypCut CAM\/nesting, this platform is engineered for \u003cstrong\u003emaximum sheet throughput, operator safety, and repeatable quality\u003c\/strong\u003e on large-format steel, stainless, aluminum, and mixed-metal jobs.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__hero-grid\"\u003e\n\u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 12 kW fiber (Raycus \/ IPG) · \u003cstrong\u003eBed size:\u003c\/strong\u003e 6×12 ft (72×144″) · \u003cstrong\u003eController:\u003c\/strong\u003e FSCUT with CypCut CAM \/ nesting\u003c\/p\u003e\n\u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 · \u003cstrong\u003eHead:\u003c\/strong\u003e Auto-focus fiber cutting head · \u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e \/ O\u003csub\u003e2\u003c\/sub\u003e \/ air (configuration dependent)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"umpro-product__hero-points\"\u003e\n\u003cli\u003e12 kW fiber power for aggressive cutting on thin sheet and heavy plate\u003c\/li\u003e\n\u003cli\u003eLarge 6×12 ft format for high-yield nesting, long parts, and big panels\u003c\/li\u003e\n\u003cli\u003eClass 1 fully enclosed cabinet with integrated fume extraction and industrial chiller\u003c\/li\u003e\n\u003cli\u003eFSCUT + CypCut for intelligent nesting, simulation, and process diagnostics\u003c\/li\u003e\n\u003cli\u003eDesigned for multi-shift, high-duty cycles where uptime and cycle time drive ROI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/header\u003e\u003c!-- POSITIONING \/ VALUE FOR US BUYERS --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 12 kW, 6×12 ft enclosed fiber laser is positioned as an \u003cstrong\u003eultra high-power flagship cutting cell\u003c\/strong\u003e for shops where laser capacity limits overall output. It’s intended for operations that routinely process \u003cstrong\u003ethick plate, high-volume sheet nests, and demanding alloys\u003c\/strong\u003e—and that want to compress pierce time, reduce cycle time, and standardize quality across large-format 6×12 sheets.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 kW fiber laser (Raycus \/ IPG):\u003c\/strong\u003e delivers extremely fast cutting on thin and mid-gauge sheet and extends into heavy plate capability for mild steel, stainless, and aluminum. Compared to 4–6 kW systems, 12 kW sharply reduces pierce times and allows much higher linear cutting speeds in many thickness ranges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge 6×12 ft (72×144″) bed:\u003c\/strong\u003e handles full-size 6×12 sheets commonly used in heavy fabrication, machinery, and architectural work. Supports \u003cstrong\u003ehigh-density nesting\u003c\/strong\u003e of brackets, frames, and panels, reducing material waste and handling time per part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-cover, Class 1 enclosure:\u003c\/strong\u003e a light-tight, interlocked safety cabinet with viewing windows and internal lighting. Helps contain process light and fumes, simplifying laser zoning and safety planning in shared bays with press brakes, welding cells, and assembly stations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e automatically adjusts focus for different thicknesses and moderate sheet warp across the full 6×12 ft working envelope. Supports consistent kerf, reliable piercing, and weld-ready edges on demanding nests and stacked cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFSCUT controller with CypCut CAM:\u003c\/strong\u003e an industrial control stack widely deployed on flat-sheet lasers. Provides intelligent nesting, micro-joint and common-line control, advanced lead-in\/out strategies, and simulation, helping reduce scrap and rework while improving predictability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated fume extraction \u0026amp; industrial chiller:\u003c\/strong\u003e included as part of the system. Proper cooling and fume management are critical when running 12 kW in multi-shift duty; this configuration is designed to support stable, repeatable output across long production runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixed-metal and mixed-thickness production:\u003c\/strong\u003e capable of processing carbon steel, stainless, aluminum, and brass within defined thickness ranges. Assist gas strategies can be tuned for performance, cosmetic edges, or lowest cost per part—depending on the job.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for throughput, not demos:\u003c\/strong\u003e engineered for real-world job-shop and OEM environments where the laser cell must integrate with upstream CAD\/ERP and downstream forming, welding, and assembly operations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003c!-- PERFORMANCE OVERVIEW --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--performance\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003ePerformance: 12 kW power · 6×12 ft full-sheet capacity\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003e12 kW fiber source\u003c\/strong\u003e on a \u003cstrong\u003e6×12 ft platform\u003c\/strong\u003e is designed for operations that want to push cut speeds and pierce performance near the practical limits for many sheet and plate applications. It’s particularly attractive where laser cutting is directly tied to plant throughput and where the ability to \u003cstrong\u003eclear full 6×12 nests quickly\u003c\/strong\u003e has downstream impacts on bending, welding, and assembly.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__metrics-grid\"\u003e\n\u003cdiv class=\"umpro-product__metric\"\u003e\n\u003cp class=\"umpro-product__metric-label\"\u003eTypical material coverage*\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon\/mild steel: thin gauge through demanding thick plate applications (depending on gas and quality targets)\u003c\/li\u003e\n\u003cli\u003eStainless steel: thin and mid-gauge plus heavier sections for food, pharmaceutical, and architectural applications\u003c\/li\u003e\n\u003cli\u003eAluminum: panels and plate used in structural and enclosure work, with tuned cut parameters and gas strategy\u003c\/li\u003e\n\u003cli\u003eBrass \u0026amp; copper alloys: defined thickness ranges supported with appropriate parameters and safety considerations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__metric-note\"\u003e*Exact thickness capability depends on alloy, assist gas, nozzle, cut parameters, and the balance between edge quality and cycle time you want to achieve.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__metric\"\u003e\n\u003cp class=\"umpro-product__metric-label\"\u003eThroughput characteristics*\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOrder-of-magnitude pierce time reductions vs. lower-power systems in many gauge ranges\u003c\/li\u003e\n\u003cli\u003eVery high linear cut speeds on thin and mid-gauge sheet, especially with nitrogen or air\u003c\/li\u003e\n\u003cli\u003eStrong cut-through performance and shorter cycle times on thick steel and stainless plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__metric-note\"\u003e*Best measured on your actual nests; we can generate cycle-time estimates based on your parts and parameters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__metric\"\u003e\n\u003cp class=\"umpro-product__metric-label\"\u003eQuality \u0026amp; repeatability*\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeld-ready edges achievable with tuned 12 kW parameters on appropriate materials\u003c\/li\u003e\n\u003cli\u003eConsistent part geometry and edge appearance across full-sheet nests and repeat orders\u003c\/li\u003e\n\u003cli\u003eCut recipes managed via FSCUT\/CypCut libraries to standardize performance across shifts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__metric-note\"\u003e*Critical dimensions and edge specs should be validated via sample cuts on your material and fixturing before locking in customer tolerances.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c!-- DETAILED TECHNICAL SPECIFICATIONS --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 12 kW 6×12 enclosed fiber laser is supplied as a \u003cstrong\u003ecomplete cutting cell\u003c\/strong\u003e. The fiber laser source, motion platform, auto-focus head, control stack, Class 1 enclosure, extraction, and chiller are designed to operate as one integrated system once utilities and exhaust are connected to specification.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__specs-grid\"\u003e\n\u003c!-- LASER SOURCE --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eLaser power \u0026amp; source\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 12 kW fiber (Raycus or IPG)\u003c\/p\u003e\n\u003cp\u003e12 kW is an \u003cstrong\u003eultra high-power configuration\u003c\/strong\u003e designed for shops where:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eLaser cutting is a central bottleneck in the production process\u003c\/li\u003e\n\u003cli\u003eThick plate and heavy sections are routine, not occasional one-off jobs\u003c\/li\u003e\n\u003cli\u003eCutting speed and pierce time directly affect delivery performance and capacity planning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRaycus and IPG are established industrial suppliers with a strong track record in high-power fiber lasers, supporting stable output and service options suited to production environments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- WORKING ENVELOPE --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eWorking envelope\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eBed size \/ stroke:\u003c\/strong\u003e 6×12 ft (72×144″) nominal working area\u003c\/p\u003e\n\u003cp\u003eA 6×12 platform is well-suited to:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eLarge cabinets, chassis, and panels cut in a single setup from full sheets\u003c\/li\u003e\n\u003cli\u003eHigh-density nests of mixed brackets, frames, and small parts optimized for material yield\u003c\/li\u003e\n\u003cli\u003eArchitectural panels, large signage, and structural profiles requiring extended part length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRemnant sheets can be saved as custom sheet definitions in CypCut for reuse across future jobs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- CONTROLLER \/ CAM --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eController \u0026amp; CAM \/ nesting\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eControl:\u003c\/strong\u003e FSCUT industrial motion \u0026amp; laser controller\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSoftware:\u003c\/strong\u003e CypCut CAM \/ nesting (flat sheet)\u003c\/p\u003e\n\u003cp\u003eFSCUT + CypCut provide an integrated programming and runtime environment tailored to high-power sheet cutting on large tables:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eDXF\/STEP import from standard CAD workflows\u003c\/li\u003e\n\u003cli\u003eAutomatic and interactive nesting on full 6×12 sheets and defined remnant sizes\u003c\/li\u003e\n\u003cli\u003eLead-in\/out optimization, micro-joints, corner smoothing, and cut sequence control\u003c\/li\u003e\n\u003cli\u003eCommon-line cutting and bridging to reduce pierces and cycle time on high-density nests\u003c\/li\u003e\n\u003cli\u003eSimulation and graphical verification before cutting, with part and pierce visualization\u003c\/li\u003e\n\u003cli\u003eDiagnostic tools linked to I\/O, alarms, and motion\/laser status signals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe widespread adoption of FSCUT\/CypCut in industry can simplify hiring and training for operator and programmer roles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- CUTTING HEAD --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eCutting head \u0026amp; auto-focus\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Auto-focus fiber cutting head with capacitive height sensing\u003c\/p\u003e\n\u003cp\u003eOn a 12 kW system, the cutting head must manage high energy densities and variable thickness. The auto-focus configuration:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eAutomatically positions focus for each material\/thickness combination\u003c\/li\u003e\n\u003cli\u003eMaintains consistent standoff across the 6×12 bed even with moderate sheet warp\u003c\/li\u003e\n\u003cli\u003eReduces manual focus changes and supports rapid job changeovers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eParameter libraries in CypCut link focus position, gas pressure, and speed to each material\/thickness recipe, improving repeatability and cross-shift consistency.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ENCLOSURE \/ SAFETY --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eEnclosure \u0026amp; safety\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 safety cabinet with interlocks\u003c\/p\u003e\n\u003cp\u003eThe enclosure is engineered specifically for ultra high-power operation:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eInterlocked access doors that stop cutting if opened or not fully closed\u003c\/li\u003e\n\u003cli\u003eViewing windows for monitoring pierce and cut behavior without open-beam exposure\u003c\/li\u003e\n\u003cli\u003eInternal lighting and access points planned around 6×12 sheet loading and maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eClass 1 design helps confine laser hazards to the cabinet under normal operation and can simplify safety documentation and PPE requirements around the machine.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- UTILITIES \/ CHILLER \/ EXTRACTION --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eUtilities, chiller \u0026amp; fume extraction\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e industrial chiller and integrated fume extraction system\u003c\/p\u003e\n\u003cp\u003eAt 12 kW, stable cooling and fume management are essential for performance and reliability:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eDedicated chiller circuits for the laser and optics maintain temperatures within spec\u003c\/li\u003e\n\u003cli\u003eExtraction captures smoke and particulates at the cutting zone and routes them to your plant exhaust\/filtration\u003c\/li\u003e\n\u003cli\u003eStable thermal and environmental conditions support consistent cut behavior and long component life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!-- ASSIST GASES --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eAssist gases \u0026amp; process strategy\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, and air (configuration dependent)\u003c\/p\u003e\n\u003cp\u003e12 kW platforms benefit from carefully planned gas strategies:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOxygen:\u003c\/strong\u003e high-speed cutting of mild steel with oxidized edges; commonly used on thicker plate and where speed is prioritized over cosmetic finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNitrogen:\u003c\/strong\u003e bright, oxide-free edges for stainless, aluminum, and mild steel where weld-ready or cosmetic edges are required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry air:\u003c\/strong\u003e cost-optimized cutting on selected materials and thicknesses where some oxide tint is acceptable; requires careful parameter tuning and adequate drying\/filtration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe can help size gas supply (cylinders vs bulk vs compressor systems) based on duty cycle, material mix, and planned utilization.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- MOTION SYSTEM --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eMotion system \u0026amp; structure\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eMotion:\u003c\/strong\u003e servo-driven gantry with precision linear guidance\u003c\/p\u003e\n\u003cp\u003eThe motion system is designed to keep pace with 12 kW cutting:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eSmooth acceleration and interpolation on long 6×12 toolpaths\u003c\/li\u003e\n\u003cli\u003eConsistent feature geometry and hole quality across the full working envelope\u003c\/li\u003e\n\u003cli\u003eRobustness for continuous, multi-shift production and frequent job changes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!-- ELECTRICAL \/ FOOTPRINT --\u003e\n\u003cdiv class=\"umpro-product__spec-item\"\u003e\n\u003ch4 class=\"umpro-product__spec-title\"\u003eElectrical \u0026amp; footprint (high level)\u003c\/h4\u003e\n\u003cp\u003eFull electrical and layout documentation is provided during the quoting and planning phase. At a high level, the system is intended for:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eUS industrial 3-phase power sized for a 12 kW fiber laser, chiller, and motion\/control systems\u003c\/li\u003e\n\u003cli\u003eInstallation in fabrication bays or dedicated laser rooms with room for 6×12 sheet loading and staging\u003c\/li\u003e\n\u003cli\u003eRigging and floor loading comparable to other enclosed high-power large-format lasers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePre-install planning focuses on power, access paths, crane\/forklift capabilities, and sheet handling to keep commissioning focused on actual parts and processes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"umpro-product__note\"\u003e\u003cem\u003e Real-world cutting capability, tolerances, and throughput depend on alloy, assist gas, nozzle selection, nesting strategy, and quality expectations. For critical jobs, we recommend qualification runs with your actual parts and materials prior to finalizing production tolerances and quoting strategies. \u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- APPLICATIONS \/ USE CASES --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n\u003cp\u003eThe 12 kW, 6×12 ft Umprotech enclosed fiber laser is typically deployed as a \u003cstrong\u003eflagship production cell\u003c\/strong\u003e in fabrication plants and OEM facilities where laser cutting is a central constraint. It can run as a standalone cell or as part of a tightly integrated fabrication line feeding press brakes, panel benders, machining centers, and robotic welding cells.\u003c\/p\u003e\n\u003cdiv class=\"umpro-product__usecases-grid\"\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eHeavy cabinets, chassis \u0026amp; machine frames\u003c\/h4\u003e\n\u003cp\u003eCutting heavy cabinet panels, machine frames, base plates, and sidewalls from full 6×12 sheets, with features and bend lines aligned to downstream forming and welding operations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eStructural sheet \u0026amp; plate components\u003c\/h4\u003e\n\u003cp\u003eHigh-speed cutting of gussets, stiffeners, mounting plates, and structural sheet\/plate elements for machinery, construction, material handling systems, and heavy equipment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eOEM kit-based production\u003c\/h4\u003e\n\u003cp\u003eLarge, kit-based nests combining panels, brackets, and plates for OEM assemblies. 12 kW power helps keep overall cycle times aligned with robotic welding cells and high-throughput assembly operations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eHVAC, ducting \u0026amp; building systems\u003c\/h4\u003e\n\u003cp\u003eProduction of large duct sections, plenums, rails, and mounting structures, taking advantage of 6×12 sheet formats and high cut speeds to minimize per-part cost in competitive markets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eSignage \u0026amp; architectural metalwork\u003c\/h4\u003e\n\u003cp\u003eLarge signage, architectural screens, and decorative panels in steel, stainless, and aluminum, where 6×12 format plus 12 kW power support fast cutting of complex patterns and long profiles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eHigh-mix \/ high-volume job-shop work\u003c\/h4\u003e\n\u003cp\u003eJob shops and contract manufacturers with high utilization, frequent changeovers, and a wide thickness range, where 12 kW and 6×12 sheets provide headroom and flexibility for diverse customer workloads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003ePrototype-to-production on the same platform\u003c\/h4\u003e\n\u003cp\u003eEngineering and production can validate new parts, materials, and nests on the same 12 kW 6×12 hardware that will carry full-scale production, reducing risk when new programs launch or existing parts change.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"umpro-product__usecase\"\u003e\n\u003ch4\u003eIntegration into automated cells \u0026amp; towers\u003c\/h4\u003e\n\u003cp\u003eActs as the front-end cutting engine for automated material towers, load\/unload systems, and robotic fabrication cells where the laser’s ability to rapidly clear full 6×12 nests is essential to cell-wide OEE.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eIn many plants, the 12 kW 6×12 cell is positioned as the \u003cstrong\u003eprimary high-power asset\u003c\/strong\u003e, with lower-power machines handling prototypes, specialty materials, or overflow work.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- CONFIGURATIONS \u0026 OPTIONS --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n\u003cp\u003eThe Umprotech 12 kW 6×12 enclosed fiber laser is supplied as a \u003cstrong\u003eready-to-run high-power cutting system\u003c\/strong\u003e. Core systems—12 kW fiber source, auto-focus cutting head, FSCUT control, full enclosure, extraction, and chiller— are included. Configuration options let you align the cell with your internal standards, gas strategy, and integration plans.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber source options:\u003c\/strong\u003e 12 kW Raycus or 12 kW IPG, chosen according to your installed base, preferred service relationships, and corporate standards for laser sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssist gas configuration:\u003c\/strong\u003e support for N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, and air (configuration dependent), with guidance on storage, supply pressure, and piping to match 12 kW duty cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl stack:\u003c\/strong\u003e FSCUT controller with CypCut CAM\/nesting as standard—no separate flat-sheet CAM purchase required for typical programming, nesting, and simulation needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e supplied as standard, with parameter libraries in CypCut structured by material and thickness to simplify daily operation and cross-shift consistency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-cover enclosure \u0026amp; fume extraction:\u003c\/strong\u003e integrated cabinet and extraction system help minimize engineering time and simplify safety and air-quality planning around the laser cell.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial chiller:\u003c\/strong\u003e sized for sustained 12 kW operation in multi-shift environments, helping maintain stable beam quality and thermal conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork \u0026amp; file integration:\u003c\/strong\u003e support for network-based file transfer and integration with your CAD\/ERP\/MES systems through structured folder and naming conventions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomation \u0026amp; handling integration:\u003c\/strong\u003e optional support for planning interfaces to load\/unload systems, towers, conveyors, or robotic cells as your automation roadmap evolves.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor specific requirements—such as unique alloys, strict internal specifications, or defined cell concepts—we can collaborate with your engineering, operations, and safety teams to recommend a 12 kW 6×12 configuration, parameter strategy, and integration approach tailored to your plant.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- IMPLEMENTATION \u0026 SUPPORT --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n\u003cp\u003eDeploying a \u003cstrong\u003e12 kW 6×12 fiber laser\u003c\/strong\u003e is a strategic investment. We support US job shops, OEMs, and integrators from early evaluation through commissioning and ramp-up, focusing on \u003cstrong\u003ereal parts, realistic cycle times, and sustainable processes\u003c\/strong\u003e instead of just nameplate power.\u003c\/p\u003e\n\u003cul class=\"umpro-product__list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-installation planning:\u003c\/strong\u003e detailed review of power capacity, grounding, gas infrastructure (N\u003csub\u003e2\u003c\/sub\u003e\/O\u003csub\u003e2\u003c\/sub\u003e\/air), exhaust routing, floor layout, rigging paths, and 6×12 sheet handling so site preparation is clear before the machine ships.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart \u0026amp; material review:\u003c\/strong\u003e analysis of representative parts, materials, thickness ranges, and throughput expectations to confirm that a 12 kW 6×12 configuration fits your production needs and growth plans.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCypCut workflow setup:\u003c\/strong\u003e assistance in organizing nesting rules, layer conventions, part naming, micro-joint strategies, and parameter libraries aligned with your materials and quality targets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator \u0026amp; maintenance training:\u003c\/strong\u003e training on safe operation of a 12 kW system, startup\/shutdown, alarm handling, daily checks, and routine maintenance tasks (nozzles, lenses, filters, cleaning, and basic inspection).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOngoing process support:\u003c\/strong\u003e support for new materials, cut-quality improvements, cycle-time optimization, and integration questions as more work is moved onto the 12 kW 6×12 cell.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"umpro-product__cta\"\u003e\u003cstrong\u003eNext step:\u003c\/strong\u003e send representative part files (DXF\/STEP\/PDF) plus your material and thickness ranges. We’ll review fit, estimate cycle times, and recommend a 12 kW 6×12 configuration and assist-gas strategy aligned with your production targets and ROI expectations.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- TECHNICAL FAQ --\u003e\n\u003csection class=\"umpro-product__section umpro-product__section--faq umpro-product-faq\"\u003e\n\u003ch3 class=\"umpro-product__heading\"\u003eTechnical FAQ – 12 kW · 6×12 ft enclosed fiber laser\u003c\/h3\u003e\n\u003cdiv class=\"umpro-product-faq__grid\"\u003e\n\u003c!-- FAQ 1 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhen does a 12 kW 6×12 system make more sense than 6 kW or lower power?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eA 12 kW 6×12 system is most compelling when you:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eRoutinely cut thick plate or heavy sections, not just thin sheet\u003c\/li\u003e\n\u003cli\u003eRun high utilization on your lasers, where every minute of cycle time matters\u003c\/li\u003e\n\u003cli\u003eWant to consolidate multiple lower-power machines into a smaller number of high-power cells\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf your workload is mostly thin sheet at moderate volumes, 2–6 kW may be sufficient. When thick plate, high-volume nests, and tight lead times dominate, 12 kW offers a substantial performance margin.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 2 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhat thickness range can a 12 kW 6×12 platform realistically handle?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003e12 kW is designed to cover \u003cstrong\u003ethin sheet through demanding plate applications\u003c\/strong\u003e in carbon steel, stainless, and aluminum. Exact ranges depend on:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eMaterial (mild vs high-strength steel, stainless grades, aluminum series, copper alloys)\u003c\/li\u003e\n\u003cli\u003eAssist gas (N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, air) and available pressure\/flow\u003c\/li\u003e\n\u003cli\u003eRequired edge quality (cosmetic, weld-ready, or to be machined)\u003c\/li\u003e\n\u003cli\u003eCycle-time targets vs. consumable and gas cost constraints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe recommend running sample cuts on your actual materials and thickness ranges to confirm performance before publishing internal thickness and speed tables.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 3 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow does 12 kW power impact assist gas usage and operating cost per part?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eAt 12 kW, assist gas flow rates and pressure requirements often increase compared to lower-power systems, especially on thick or high-speed cuts. However:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eCut time per part can drop significantly due to higher speeds and faster pierces\u003c\/li\u003e\n\u003cli\u003eGas consumption per minute may rise, but gas consumption per part can fall\u003c\/li\u003e\n\u003cli\u003eBulk gas or advanced air systems become more cost-effective as utilization increases\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe can help estimate gas cost per part and suggest supply strategies matched to your duty cycle and material mix.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 4 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eDoes high power increase the risk of part quality issues like dross and taper?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eHigh power amplifies both \u003cstrong\u003ecapability\u003c\/strong\u003e and \u003cstrong\u003ethe need for good process control\u003c\/strong\u003e. With well-tuned parameters:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003e12 kW can produce clean, weld-ready edges at high speeds on many materials\u003c\/li\u003e\n\u003cli\u003ePierce and cut quality can improve, especially on thicker sections\u003c\/li\u003e\n\u003cli\u003eDross and taper can be held within tight limits by optimizing focus, speed, and gas settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe work with your parts and materials to develop parameter sets that balance speed, quality, and consumable life.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 5 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow does CypCut handle large 6×12 nests and remnant management at 12 kW speeds?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eCypCut is designed to manage large sheets and high-density nests, including:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eAutomatic and manual nesting on full 6×12 sheets with part priority controls\u003c\/li\u003e\n\u003cli\u003eCreation and reuse of remnant sheet definitions for partial leftovers\u003c\/li\u003e\n\u003cli\u003eCommon-line cutting, bridge cutting, and skeleton reduction techniques\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDuring implementation, we can help define nesting rules and conventions that make it easy to leverage 12 kW speeds while still maximizing material yield.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 6 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhat facility requirements should we expect for a 12 kW 6×12 system?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eA 12 kW platform has higher infrastructure demands than low-power systems. Plan for:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eSufficient 3-phase power capacity, including margin for chiller and auxiliary loads\u003c\/li\u003e\n\u003cli\u003eAssist gas supply sized for 12 kW duty cycles (bulk tanks or high-volume cylinder banks)\u003c\/li\u003e\n\u003cli\u003eExhaust or filtration suitable for the fume load from high-speed, high-power cutting\u003c\/li\u003e\n\u003cli\u003eFloor space, crane\/forklift access, and clearances compatible with a 6×12 enclosed laser\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese requirements are detailed in pre-install documentation and reviewed with your facilities and safety teams.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 7 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow complex is operator training on a 12 kW FSCUT + CypCut system?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eOperators with CNC or laser experience adapt quickly, but 12 kW power demands disciplined procedures. Training emphasizes:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eUnderstanding Class 1 enclosure behavior, interlocks, and emergency stops\u003c\/li\u003e\n\u003cli\u003eLoading nests, selecting parameter libraries, and making controlled adjustments\u003c\/li\u003e\n\u003cli\u003eInterpreting alarms, monitoring cut quality, and performing basic troubleshooting\u003c\/li\u003e\n\u003cli\u003eRoutine maintenance tasks impacting quality and uptime (nozzles, lenses, cleaning)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eClear procedures and parameter libraries help maintain consistency across shifts, even in busy production environments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 8 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eWhat does routine maintenance look like on a 12 kW system, and what happens if it’s neglected?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eAt 12 kW, routine maintenance is critical for both quality and component life. Typical recurring tasks include:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eInspecting and cleaning\/replacing nozzles and protective windows at defined intervals\u003c\/li\u003e\n\u003cli\u003eChecking assist gas filters, hoses, regulators, and seals for contamination and leaks\u003c\/li\u003e\n\u003cli\u003eMonitoring chiller performance, fluid levels, and alarm history\u003c\/li\u003e\n\u003cli\u003eCleaning the cutting area, removing slag, and checking motion components and cable management\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeglecting these tasks can accelerate wear on optics, degrade cut quality, and shorten intervals between unplanned downtime events.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 9 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow does the Class 1 enclosure influence our safety program and PPE requirements?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eThe Class 1 enclosure is designed to contain the laser beam and process light under normal operation. As a result:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eLaser hazards are largely confined to the inside of the cabinet\u003c\/li\u003e\n\u003cli\u003eLaser-specific PPE (e.g., eyewear) is typically focused on maintenance and service scenarios\u003c\/li\u003e\n\u003cli\u003eSafety programs emphasize interlock checks, lockout\/tagout, and safe loading\/unloading procedures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis can simplify placing the machine in shared bays with other processes, as long as procedures are documented and followed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 10 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eCan the 12 kW 6×12 cell integrate with our existing CAD\/ERP\/MES systems?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eYes. A typical integration pattern looks like:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eEngineering manages geometry and revisions in your CAD and PLM systems\u003c\/li\u003e\n\u003cli\u003eFlat patterns are exported as DXF\/STEP using part numbers and revisions that align with ERP\/MES\u003c\/li\u003e\n\u003cli\u003eCypCut imports these files for nesting, parameter assignment, and simulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe can help define folder structures, naming conventions, and job-release steps so the laser cell fits cleanly into your existing planning and scheduling systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ 11 --\u003e\n\u003carticle class=\"umpro-product-faq__item\"\u003e\n\u003ch4 class=\"umpro-product-faq__question\"\u003eHow do we decide if a 12 kW 6×12 configuration is the right investment for our shop?\u003c\/h4\u003e\n\u003cdiv class=\"umpro-product-faq__answer\"\u003e\n\u003cp\u003eThe decision should be based on your \u003cstrong\u003eactual part mix, bottlenecks, and growth plans\u003c\/strong\u003e. We typically analyze:\u003c\/p\u003e\n\u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n\u003cli\u003eYour material and thickness distribution across key product families\u003c\/li\u003e\n\u003cli\u003eCurrent and projected laser utilization and where cutting is limiting output\u003c\/li\u003e\n\u003cli\u003eEdge-quality and tolerance requirements on your most critical parts\u003c\/li\u003e\n\u003cli\u003eROI scenarios comparing 12 kW to lower-power configurations and potential automation investments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUsing your data and sample parts, we can recommend whether a 12 kW 6×12 cell should be your primary production engine, part of a multi-laser strategy, or a staged upgrade path in a broader capacity roadmap.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c\/div\u003e\n\u003cp class=\"umpro-product-faq__closing\"\u003e\u003cstrong\u003eStill evaluating 12 kW on a 6×12 platform?\u003c\/strong\u003e Share representative part files and your material\/thickness mix. We’ll prepare a focused assessment and configuration recommendation for your 12 kW 6×12 enclosed fiber laser cell, including expected cycle times and assist-gas strategies.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966015926638,"sku":"UFL-6x12-12KW-ENC","price":259900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-12kw-enclosed-fiber-laser-cutter-6x20ft-fscut-5723155.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-2kw-6x20ft","title":"Umprotech Enclosed Fiber Laser Cutter 2kW 6x20ft FSCUT","description":"\u003csection class=\"umpro-product umpro-product--flagship\"\u003e\n  \u003c!-- HERO \/ OVERVIEW --\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003cp class=\"umpro-product__eyebrow\"\u003eEnclosed Fiber Laser Cutting Cell · Long-Format 6×20 Platform\u003c\/p\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003e\n      Umprotech Enclosed Fiber Laser Cutter – 2 kW · 6×20 ft · FSCUT \/ CypCut\n    \u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003e\n      A fully enclosed, \u003cstrong\u003eproduction-ready 2 kW fiber laser cutting system\u003c\/strong\u003e on a\n      \u003cstrong\u003e6×20 ft (72×240\") bed\u003c\/strong\u003e, built for US job shops, OEMs, and fabrication cells that need\n      \u003cstrong\u003ereliable, clean cutting on oversized sheets\u003c\/strong\u003e. Combining a 2 kW Raycus or IPG fiber source with\n      FSCUT motion control and CypCut CAM\/nesting, this platform is optimized for\n      \u003cstrong\u003elong-format sheet and plate work, high-yield nesting, and safe operation\u003c\/strong\u003e on stainless, carbon\n      steel, aluminum, and brass.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__hero-grid\"\u003e\n      \u003cp class=\"umpro-product__hero-line\"\u003e\n        \u003cstrong\u003eLaser power:\u003c\/strong\u003e 2 kW fiber (Raycus \/ IPG) ·\n        \u003cstrong\u003eBed size:\u003c\/strong\u003e 6×20 ft (72×240\") ·\n        \u003cstrong\u003eController:\u003c\/strong\u003e FSCUT with CypCut CAM \/ nesting\n      \u003c\/p\u003e\n      \u003cp class=\"umpro-product__hero-line\"\u003e\n        \u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 ·\n        \u003cstrong\u003eHead:\u003c\/strong\u003e Auto-focus fiber cutting head ·\n        \u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e \/ O\u003csub\u003e2\u003c\/sub\u003e \/ air (configuration dependent)\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cul class=\"umpro-product__hero-points\"\u003e\n      \u003cli\u003e2 kW fiber power tuned for efficient cutting in common sheet and light plate ranges\u003c\/li\u003e\n      \u003cli\u003eExtra-long 6×20 ft format for large panels, long parts, and maximum nesting yield\u003c\/li\u003e\n      \u003cli\u003eClass 1 fully enclosed cabinet with integrated fume extraction and industrial chiller\u003c\/li\u003e\n      \u003cli\u003eFSCUT + CypCut for intelligent nesting, simulation, and job setup from DXF\/STEP\u003c\/li\u003e\n      \u003cli\u003eDesigned as a cost-effective, long-format production asset for mixed-metal jobs\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/header\u003e\n\n  \u003c!-- POSITIONING \/ VALUE FOR US BUYERS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 2 kW, 6×20 ft enclosed fiber laser is positioned as a\n      \u003cstrong\u003elong-format, high-yield cutting cell\u003c\/strong\u003e for shops that routinely process large blanks, long panels,\n      and multi-part nests—but do not require ultra high-power levels for heavy plate. It’s well suited when\n      \u003cstrong\u003ematerial size, nesting efficiency, and safety\u003c\/strong\u003e are the focus, and typical thickness ranges fall\n      within what 2 kW fiber handles efficiently.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eLong-format 6×20 ft (72×240\") bed:\u003c\/strong\u003e supports full-length panels, long chassis members, and\n        large architectural elements without repositioning. The extended sheet size also allows\n        \u003cstrong\u003ehigh-density nesting\u003c\/strong\u003e of brackets, frames, and small components, maximizing yield per sheet.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003e2 kW fiber laser (Raycus \/ IPG):\u003c\/strong\u003e provides a \u003cstrong\u003epractical balance\u003c\/strong\u003e between\n        cutting speed, thickness capacity, and operating cost for common sheet and light plate applications in\n        carbon steel, stainless, and aluminum, plus brass in defined ranges.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFull-cover, Class 1 enclosure:\u003c\/strong\u003e light-tight, interlocked housing with viewing windows and\n        internal lighting. Helps contain process light and fumes, making it easier to integrate a long-format laser\n        into shared bays with press brakes, welding stations, and assembly lines.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e automatically compensates for material thickness and moderate sheet\n        warp across the entire 6×20 ft working envelope. Supports consistent kerf and edge quality on long parts and\n        nested kits, reducing manual cleanup and rework.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFSCUT controller with CypCut CAM:\u003c\/strong\u003e widely used flat-sheet control stack that provides\n        intelligent nesting, micro-joints, common-line strategies, and simulation. Reduces programming time, improves\n        material yield, and standardizes cutting processes across shifts.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegrated fume extraction \u0026amp; industrial chiller:\u003c\/strong\u003e included as part of the system to\n        simplify specification and installation. Proper cooling and fume management support consistent quality and\n        uptime on long-format, multi-shift production.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOptimized for large-format, moderate thickness workloads:\u003c\/strong\u003e especially attractive for job\n        shops, OEMs, and contract manufacturers cutting mostly \u003cstrong\u003ethin to mid-gauge materials\u003c\/strong\u003e and wanting\n        the throughput and nesting benefits of 6×20 sheets without stepping into the higher costs and infrastructure\n        demands of very high-power lasers.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eBuilt for integration into real workflows:\u003c\/strong\u003e designed to tie into upstream CAD and downstream\n        forming, welding, and assembly operations where long parts and large panels are common.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- PERFORMANCE OVERVIEW --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--performance\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003ePerformance: 2 kW power · 6×20 ft long-format capacity\u003c\/h3\u003e\n    \u003cp\u003e\n      A \u003cstrong\u003e2 kW fiber source\u003c\/strong\u003e on a \u003cstrong\u003e6×20 ft platform\u003c\/strong\u003e is aimed at operations where\n      \u003cstrong\u003ematerial size, nesting efficiency, and edge quality\u003c\/strong\u003e matter as much as raw cutting speed.\n      It’s a strong fit for shops that primarily cut thin and mid-gauge sheet and light plate, and want to run\n      \u003cstrong\u003elarge-format nests with predictable operating costs\u003c\/strong\u003e.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__metrics-grid\"\u003e\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eTypical material coverage*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eCarbon\/mild steel: common sheet and light plate thicknesses used in brackets, panels, and frames\u003c\/li\u003e\n          \u003cli\u003eStainless steel: thin and mid-gauge for enclosures, covers, and architectural components\u003c\/li\u003e\n          \u003cli\u003eAluminum: panel and light structural work typical in machinery and HVAC applications\u003c\/li\u003e\n          \u003cli\u003eBrass and other alloys: defined thickness ranges with appropriate parameters and safety practices\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *Exact ranges depend on alloy, assist gas, cut parameters, and the edge-quality vs speed balance you target.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eThroughput characteristics*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eEfficient cutting on thin and mid-gauge materials in a cost-controlled power class\u003c\/li\u003e\n          \u003cli\u003eHigh part counts per sheet thanks to 6×20 ft nesting, even with moderate cut speeds\u003c\/li\u003e\n          \u003cli\u003eAbility to kit complex assemblies on a single long sheet, reducing handling between operations\u003c\/li\u003e\n          \u003cli\u003eStable, repeatable cycle times when parameter libraries are tuned for your materials\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *Best evaluated using your actual nests and part geometries; we can provide representative cycle-time estimates.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eQuality \u0026amp; repeatability*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eClean, consistent edge quality across the full 6×20 ft working area\u003c\/li\u003e\n          \u003cli\u003eDimensionally stable parts suitable for downstream bending, welding, and assembly\u003c\/li\u003e\n          \u003cli\u003eRecipe-based control via CypCut parameter libraries for cross-shift consistency\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *Critical tolerances and finishes should be validated on your materials and fixturing during qualification.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- DETAILED TECHNICAL SPECIFICATIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 2 kW 6×20 enclosed fiber laser is delivered as a \u003cstrong\u003ecomplete long-format cutting cell\u003c\/strong\u003e.\n      Fiber source, motion system, auto-focus head, control, enclosure, extraction, and chiller are supplied together\n      to create a self-contained cutting platform once power, gas, and exhaust are connected to spec.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003c!-- LASER SOURCE --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eLaser power \u0026amp; source\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 2 kW fiber (Raycus or IPG)\u003c\/p\u003e\n        \u003cp\u003e\n          2 kW is a \u003cstrong\u003eversatile, cost-conscious power level\u003c\/strong\u003e ideal for shops that:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eProcess mostly thin to mid-gauge materials and light plate\u003c\/li\u003e\n          \u003cli\u003eWant controlled operating and consumable costs\u003c\/li\u003e\n          \u003cli\u003eNeed long-format capability more than extreme thickness capacity\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Both Raycus and IPG are established industrial fiber suppliers, providing stable power output and support\n          appropriate for production environments.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- WORKING ENVELOPE --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eWorking envelope\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eBed size \/ stroke:\u003c\/strong\u003e 6×20 ft (72×240\") nominal working area\u003c\/p\u003e\n        \u003cp\u003e\n          A 6×20 platform is well suited to:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eLong panels, chassis members, and architectural strips that don’t fit on 6×12 or smaller beds\u003c\/li\u003e\n          \u003cli\u003eHigh-yield nests that combine many smaller parts on extended sheets\u003c\/li\u003e\n          \u003cli\u003eKit-based nests that group all parts for an assembly on one large blank\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Remnant management in CypCut lets you define leftover sheet regions as reusable stock for future jobs.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CONTROLLER \/ CAM --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eController \u0026amp; CAM \/ nesting\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eControl:\u003c\/strong\u003e FSCUT industrial laser \u0026amp; motion controller\u003c\/p\u003e\n        \u003cp\u003e\u003cstrong\u003eSoftware:\u003c\/strong\u003e CypCut CAM \/ nesting for flat sheet\u003c\/p\u003e\n        \u003cp\u003e\n          FSCUT + CypCut provide a familiar environment for programming and operating long-format sheet nests:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eDXF\/STEP import and part library management\u003c\/li\u003e\n          \u003cli\u003eAutomatic and manual nesting on 6×20 sheets and defined remnants\u003c\/li\u003e\n          \u003cli\u003eLead-in\/out control, micro-joints, corner smoothing, and sequence optimization\u003c\/li\u003e\n          \u003cli\u003eCommon-line and bridge cutting where appropriate to reduce pierce count\u003c\/li\u003e\n          \u003cli\u003eGraphical simulation to verify toolpaths before starting production\u003c\/li\u003e\n          \u003cli\u003eDiagnostic tools tied to alarms, I\/O, and motion\/laser status\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          The widespread use of FSCUT\/CypCut in industry can make hiring and training operators and programmers easier.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CUTTING HEAD --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eCutting head \u0026amp; auto-focus\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Auto-focus fiber cutting head with capacitive height sensing\u003c\/p\u003e\n        \u003cp\u003e\n          The auto-focus head helps maintain stable cut quality across long beds and variable material conditions:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eAutomatically adjusts focal position for each material\/thickness combo\u003c\/li\u003e\n          \u003cli\u003eCompensates for moderate sheet warp and table variation along the 20 ft length\u003c\/li\u003e\n          \u003cli\u003eReduces manual intervention during changeovers and mixed-material runs\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          CypCut parameter libraries link focus height, gas pressure, and cut speed to each recipe for consistent results.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ENCLOSURE \/ SAFETY --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eEnclosure \u0026amp; safety\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 safety cabinet with interlocks\u003c\/p\u003e\n        \u003cp\u003e\n          The enclosure is designed around long-format material handling and safety:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eInterlocked doors that halt cutting if opened or not properly closed\u003c\/li\u003e\n          \u003cli\u003eViewing windows for monitoring pierces, cut quality, and process stability\u003c\/li\u003e\n          \u003cli\u003eInterior lighting and access points aligned with 6×20 sheet loading and maintenance\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Class 1 classification helps confine laser hazards to the cabinet in normal operation, simplifying PPE\n          requirements around the machine.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- UTILITIES \/ CHILLER \/ EXTRACTION --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eUtilities, chiller \u0026amp; fume extraction\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e industrial chiller and integrated fume extraction\u003c\/p\u003e\n        \u003cp\u003e\n          Even at 2 kW, stable cooling and fume management are critical for reliability and quality:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eChiller circuits maintain laser and optics temperature within specification\u003c\/li\u003e\n          \u003cli\u003eExtraction captures fumes at the cutting area and routes them to your exhaust\/filtration\u003c\/li\u003e\n          \u003cli\u003eStable thermal and environmental conditions support consistent cut behavior and uptime\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ASSIST GASES --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eAssist gases \u0026amp; process strategy\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, and air (configuration dependent)\u003c\/p\u003e\n        \u003cp\u003e\n          2 kW systems benefit from a thoughtful gas strategy tuned to your material mix:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003e\n            \u003cstrong\u003eOxygen:\u003c\/strong\u003e efficient cutting on mild steel with oxidized edges—often used where speed is\n            favored over cosmetic finish and parts are painted or post-processed.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            \u003cstrong\u003eNitrogen:\u003c\/strong\u003e oxide-free edges on stainless, aluminum, and mild steel, suitable for weld-ready\n            and cosmetic surfaces.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            \u003cstrong\u003eAir:\u003c\/strong\u003e cost-focused option for certain materials and thicknesses where a light oxide tint\n            is acceptable and gas cost per part must be minimized.\n          \u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          We can help define gas supply (cylinders vs bulk vs compressed air) based on your duty cycle and quality targets.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- MOTION SYSTEM --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eMotion system \u0026amp; structure\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eMotion:\u003c\/strong\u003e servo-driven gantry with precision linear guidance\u003c\/p\u003e\n        \u003cp\u003e\n          The motion platform is engineered to maintain accuracy across the 6×20 ft workspace:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eSmooth interpolation and acceleration along long toolpaths\u003c\/li\u003e\n          \u003cli\u003eConsistent feature geometry, hole quality, and edge positioning over the full sheet\u003c\/li\u003e\n          \u003cli\u003eRobustness for continuous operation in job shop and OEM environments\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ELECTRICAL \/ FOOTPRINT --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eElectrical \u0026amp; footprint (high level)\u003c\/h4\u003e\n        \u003cp\u003e\n          Full electrical and layout details are supplied during quoting and planning. At a high level, the 2 kW 6×20\n          platform is intended for:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eUS industrial 3-phase power sized for a 2 kW fiber source, chiller, and motion\/control\u003c\/li\u003e\n          \u003cli\u003eInstallation in bays with enough length and clearance for 20 ft sheets and safe operator movement\u003c\/li\u003e\n          \u003cli\u003eRigging and material-handling paths suitable for long-format enclosed machinery\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Pre-install planning focuses on power, access, sheet handling, and exhaust so commissioning can focus on\n          actual parts and processes.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cp class=\"umpro-product__note\"\u003e\n      \u003cem\u003e\n        Real-world cutting capacity, tolerances, and throughput depend on alloy, assist gas, nozzle selection, nesting,\n        and edge-quality requirements. Critical jobs should be validated using your materials and parts before finalizing\n        internal standards and quoting models.\n      \u003c\/em\u003e\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- APPLICATIONS \/ USE CASES --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003e\n      The 2 kW, 6×20 ft Umprotech enclosed fiber laser is typically deployed as a\n      \u003cstrong\u003elong-format production cell\u003c\/strong\u003e for shops where part length and nesting efficiency are key. It\n      integrates well with press brakes, saws, welding fixtures, and assembly lines in OEM, job shop, and contract\n      manufacturing environments.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__usecases-grid\"\u003e\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eLong panels, cabinets \u0026amp; architectural work\u003c\/h4\u003e\n        \u003cp\u003e\n          Cutting long side panels, doors, and architectural strips from full 6×20 sheets, minimizing seams and\n          alignments in visible or structural applications.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eChassis, frames \u0026amp; machine bases\u003c\/h4\u003e\n        \u003cp\u003e\n          Producing long chassis rails, machine frames, and base plates for equipment and machinery, with features\n          aligned to downstream forming and welding processes.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eGeneral sheet metal parts \u0026amp; brackets\u003c\/h4\u003e\n        \u003cp\u003e\n          High-yield nests of brackets, small panels, and hardware plates on 6×20 sheets for contract manufacturing,\n          OEM kits, and repeat job shop work.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eHVAC, ducting \u0026amp; building systems\u003c\/h4\u003e\n        \u003cp\u003e\n          Cutting long duct sections, plenums, rails, and mounting structures where length and nesting efficiency\n          directly impact cost per part.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eOEM and contract manufacturing kits\u003c\/h4\u003e\n        \u003cp\u003e\n          Kitting multi-part assemblies on single 6×20 blanks, combining large panels and small brackets to reduce\n          handling and staging steps in downstream workflows.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003ePrototype-to-production workflows\u003c\/h4\u003e\n        \u003cp\u003e\n          Validating prototype parts and transitioning them into repeat production on the same long-format platform,\n          with parameter libraries and nests tuned over time.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eHigh-mix \/ low-volume job shop work\u003c\/h4\u003e\n        \u003cp\u003e\n          Job shops serving multiple customers and industries where part sizes vary widely, and a 6×20 format provides\n          the flexibility to nest diverse parts on a single sheet.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eIntegration in fabrication cells\u003c\/h4\u003e\n        \u003cp\u003e\n          Serving as the cutting front-end for cells with press brakes, weld stations, and assembly areas where\n          long-format parts and multi-part nests are fed directly into forming and joining workflows.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cp\u003e\n      In many operations, the 2 kW 6×20 cell becomes the \u003cstrong\u003ego-to machine for long-format, moderate-thickness\n      work\u003c\/strong\u003e, while higher-power or smaller-bed lasers handle thick plate or small-part overflow.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- CONFIGURATIONS \u0026 OPTIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 2 kW 6×20 enclosed fiber laser is supplied as a \u003cstrong\u003eready-to-run long-format cutting platform\u003c\/strong\u003e.\n      Core systems—2 kW fiber source, auto-focus head, FSCUT control, full enclosure, extraction, and chiller—are\n      standard. Configuration options help align the system with your material mix, gas strategy, and internal standards.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFiber source options:\u003c\/strong\u003e 2 kW Raycus or 2 kW IPG, chosen according to your preferred supplier,\n        installed base, and service strategy.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAssist gas configuration:\u003c\/strong\u003e support for N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, and air\n        (configuration dependent), with guidance on supply sizing and pressure for long-format, multi-shift workloads.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eControl stack:\u003c\/strong\u003e FSCUT controller with CypCut CAM\/nesting included—no separate basic CAM\n        purchase for flat-sheet programming and simulation.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e supplied as standard, with parameter libraries structured by\n        material and thickness to streamline operation.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eEnclosure \u0026amp; extraction:\u003c\/strong\u003e full-cover Class 1 enclosure and integrated fume extraction\n        included out of the box, simplifying safety and airflow planning.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIndustrial chiller:\u003c\/strong\u003e included and sized for 2 kW production duty, maintaining stable operating\n        temperatures for beam and optics.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eElectrical \u0026amp; utilities:\u003c\/strong\u003e available in configurations compatible with common US industrial\n        voltages; details finalized during evaluation and quoting.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegration \u0026amp; automation support:\u003c\/strong\u003e guidance for connecting the 6×20 cell to material\n        handling equipment, long-format loading systems, and downstream fabrication steps.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp\u003e\n      For specialized requirements—unique alloys, specific OEM design rules, or defined cell concepts—we work with\n      your engineering and operations teams to recommend a 2 kW 6×20 configuration aligned with your production and\n      cost targets.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- IMPLEMENTATION \u0026 SUPPORT --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003e\n      Deploying a \u003cstrong\u003elong-format 6×20 ft fiber laser\u003c\/strong\u003e is as much about workflow as it is about hardware.\n      We support US job shops, OEMs, and integrators from early evaluation through commissioning, focusing on\n      \u003cstrong\u003ereal parts, realistic cycle times, and practical material handling\u003c\/strong\u003e.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePre-installation planning:\u003c\/strong\u003e review of power capacity, grounding, gas supply\n        (N\u003csub\u003e2\u003c\/sub\u003e\/O\u003csub\u003e2\u003c\/sub\u003e\/air), exhaust routing, floor space, rigging, and 6×20 sheet handling so site\n        readiness is clearly defined.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePart \u0026amp; material review:\u003c\/strong\u003e evaluation of representative parts, materials, and thickness ranges\n        to confirm that a 2 kW 6×20 cell fits your work mix and capacity goals.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eCypCut workflow setup:\u003c\/strong\u003e help organizing part libraries, nesting rules, remnant strategies,\n        and parameter libraries to support your internal standards and quality requirements.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOperator \u0026amp; maintenance training:\u003c\/strong\u003e training on safe operation of a long-format Class 1\n        laser system, basic nesting, cut-quality checks, and routine maintenance to keep the machine stable and\n        productive.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOngoing process support:\u003c\/strong\u003e assistance with new materials, parameter optimization, yield\n        improvement, and workflow adjustments as more jobs move onto the 6×20 platform.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp class=\"umpro-product__cta\"\u003e\n      \u003cstrong\u003eNext step:\u003c\/strong\u003e send representative part files (DXF\/STEP\/PDF) and your material\/thickness ranges.\n      We’ll review fit, estimate cycle times, and recommend a 2 kW 6×20 configuration and assist-gas strategy tuned\n      to your production and ROI expectations.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- TECHNICAL FAQ --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--faq umpro-product-faq\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eTechnical FAQ – 2 kW · 6×20 ft enclosed fiber laser\u003c\/h3\u003e\n\n    \u003cdiv class=\"umpro-product-faq__grid\"\u003e\n      \u003c!-- FAQ 1 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          When does a 2 kW 6×20 platform make more sense than a higher-power system?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            A 2 kW 6×20 system is most compelling when you:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eCut primarily thin to mid-gauge materials and light plate\u003c\/li\u003e\n            \u003cli\u003eValue \u003cstrong\u003elarge-format nesting\u003c\/strong\u003e and part length more than extreme thickness capability\u003c\/li\u003e\n            \u003cli\u003eWant to control operating cost (power, gas, consumables) while still gaining long-format flexibility\u003c\/li\u003e\n            \u003cli\u003eRun moderate utilization or mixed workloads where ultra high power would be underused\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            If your workload includes frequent heavy plate or very high utilization, a higher-power configuration may\n            provide better throughput and ROI.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 2 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What thickness range can a 2 kW 6×20 realistically handle?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            2 kW fiber is well suited for \u003cstrong\u003etypical sheet and light plate ranges\u003c\/strong\u003e in carbon steel,\n            stainless, and aluminum. Exact values depend on:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eMaterial grade and quality (mild vs high-strength steels, stainless types, aluminum series)\u003c\/li\u003e\n            \u003cli\u003eAssist gas choice (N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, air) and available pressure\/flow\u003c\/li\u003e\n            \u003cli\u003eEdge-quality and cosmetic requirements vs desired cutting speed\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We recommend using sample parts and materials to validate your key thicknesses and adjust expectations\n            for speed vs edge finish during the application review.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 3 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How does 2 kW power affect operating costs compared to higher-power lasers?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            In many thin to mid-gauge applications, 2 kW systems can offer favorable operating cost profiles:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eLower electrical consumption than high-power alternatives\u003c\/li\u003e\n            \u003cli\u003eAssist gas consumption aligned with moderate cut speeds\u003c\/li\u003e\n            \u003cli\u003eSimpler infrastructure for power and gas supply in some facilities\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            If you are not consistently using the additional thickness capability and speed of higher-power lasers,\n            a 2 kW 6×20 can be the more economical choice over the lifetime of the machine.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 4 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Does the 6×20 length cause accuracy issues at the far end of the bed?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            The motion system is designed to maintain accuracy and repeatability over the full 6×20 envelope using\n            servo drives and precision linear guidance. In practice, long-format accuracy depends on:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eProper installation, leveling, and alignment of the machine base\u003c\/li\u003e\n            \u003cli\u003eRegular calibration and maintenance routines\u003c\/li\u003e\n            \u003cli\u003eParameter tuning for long toolpaths and part locations across the sheet\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            During commissioning, we verify performance across multiple positions on the table using test patterns\n            and representative parts.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 5 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How does CypCut handle large 6×20 nests and remnant management?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            CypCut includes features tailored to long-format and high-yield workflows, such as:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eAutomatic and manual nesting on 6×20 sheets with priority rules and part constraints\u003c\/li\u003e\n            \u003cli\u003eCreation and reuse of remnant sheet definitions to capture leftover material\u003c\/li\u003e\n            \u003cli\u003eCommon-line cutting, skeleton reduction, and optimized cut sequences for large nests\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We can help you develop nesting rules and naming conventions aligned with your ERP\/MES and material\n            management practices.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 6 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What facility requirements should we expect for a 2 kW 6×20 installation?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            While 2 kW is more modest in power than some high-power systems, a 6×20 platform still requires attention\n            to infrastructure:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eSufficient 3-phase power capacity for the laser, controller, and chiller\u003c\/li\u003e\n            \u003cli\u003eAssist gas supply sized for your duty cycle and material mix\u003c\/li\u003e\n            \u003cli\u003eExhaust or filtration for the fume load from large-format cutting\u003c\/li\u003e\n            \u003cli\u003eFloor space, rigging paths, and sheet-handling equipment suitable for 20 ft sheets\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Pre-install planning documents and reviews help ensure your facility requirements are clearly understood\n            and met.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 7 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How steep is the learning curve for operators on FSCUT + CypCut?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Operators with CNC or previous laser experience typically adapt quickly to FSCUT\/CypCut. Training focuses on:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eSafe operation of a Class 1 enclosed long-format laser\u003c\/li\u003e\n            \u003cli\u003eLoading and aligning 6×20 sheets and monitoring cut quality\u003c\/li\u003e\n            \u003cli\u003eNest selection, parameter library usage, and basic adjustments\u003c\/li\u003e\n            \u003cli\u003eRecognizing common issues and performing basic troubleshooting\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Standardized procedures and parameter libraries make it easier for multiple operators to share the machine\n            without sacrificing consistency.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 8 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What routine maintenance does a 2 kW 6×20 system require?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Routine maintenance is key to preserving cut quality and uptime. Typical tasks include:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eInspecting and cleaning\/replacing nozzles and protective windows\u003c\/li\u003e\n            \u003cli\u003eChecking assist gas filters, hoses, and regulators for contamination and leaks\u003c\/li\u003e\n            \u003cli\u003eMonitoring chiller fluids, temperatures, and alarms\u003c\/li\u003e\n            \u003cli\u003eCleaning slag and debris from the cutting area and inspecting motion components\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We provide recommended maintenance intervals and checklists, and training covers how to perform these tasks\n            safely and effectively.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 9 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How does the Class 1 enclosure affect our safety and PPE policies?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            The Class 1 enclosure is designed to keep the laser beam and process light contained during normal\n            operation. This typically means:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eLaser-specific PPE (such as eyewear) is mainly required for maintenance and service tasks\u003c\/li\u003e\n            \u003cli\u003eDay-to-day operation focuses on interlock checks, safe loading, and lockout\/tagout procedures\u003c\/li\u003e\n            \u003cli\u003eThe machine can often be installed in shared bays with other fabrication equipment, subject to\n              internal policies\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We can support your safety and EHS teams with documentation and best practices tailored to a Class 1\n            long-format installation.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 10 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Can the 2 kW 6×20 cell integrate with our existing CAD\/ERP\/MES workflow?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Yes. A typical integration pattern looks like:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eEngineering manages geometry and revisions in your existing CAD\/PLM tools\u003c\/li\u003e\n            \u003cli\u003eFlat patterns exported as DXF\/STEP using part-number and revision conventions aligned with ERP\/MES\u003c\/li\u003e\n            \u003cli\u003eCypCut imports these files for nesting, parameter assignment, and simulation\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We help define folder structures, naming rules, and job-release practices so the laser cell fits smoothly\n            into your planning and scheduling processes.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 11 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How do we decide if a 2 kW 6×20 configuration is the right choice for our shop?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            The decision should be based on your \u003cstrong\u003epart mix, thickness ranges, and bottlenecks\u003c\/strong\u003e. We\n            typically review:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eDistribution of part lengths, widths, and thicknesses across current and projected work\u003c\/li\u003e\n            \u003cli\u003eWhere cutting is limiting throughput and how large-format nesting could improve yield\u003c\/li\u003e\n            \u003cli\u003eEdge-quality and tolerance requirements for your most critical parts\u003c\/li\u003e\n            \u003cli\u003eROI scenarios comparing a 2 kW 6×20 to higher-power or shorter-bed alternatives\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Using your sample parts and production data, we can recommend whether a 2 kW 6×20 cell should be a primary\n            cutting asset, a dedicated long-format machine, or part of a broader multi-laser strategy.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n    \u003c\/div\u003e\n\n    \u003cp class=\"umpro-product-faq__closing\"\u003e\n      \u003cstrong\u003eStill evaluating a 2 kW 6×20 long-format platform?\u003c\/strong\u003e\n      Share representative part files and your material\/thickness mix. We’ll prepare a focused assessment and\n      configuration recommendation for your 2 kW 6×20 enclosed fiber laser cell, including expected cycle times, nesting\n      strategies, and integration options.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e\n","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966015992174,"sku":"UFL-6x20-2KW-ENC","price":189900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-12kw-enclosed-fiber-laser-cutter-6x20ft-fscut-5723155.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-3kw-6x20ft","title":"Umprotech Enclosed Fiber Laser Cutter 3kW 6x20ft FSCUT","description":"\u003csection class=\"umpro-product umpro-product--flagship\"\u003e\n  \u003c!-- HERO \/ OVERVIEW --\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003cp class=\"umpro-product__eyebrow\"\u003eEnclosed Fiber Laser Cutting Cell · Long-Format 6×20 Platform\u003c\/p\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003e\n      Umprotech Enclosed Fiber Laser Cutter – 3 kW · 6×20 ft · FSCUT \/ CypCut\n    \u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003e\n      A fully enclosed, \u003cstrong\u003eproduction-grade 3 kW fiber laser cutting system\u003c\/strong\u003e on an\n      \u003cstrong\u003eextended 6×20 ft (72×240\") bed\u003c\/strong\u003e. Engineered for US job shops, OEMs, and fabrication cells that\n      need \u003cstrong\u003erepeatable accuracy, operator safety, and high-yield nesting\u003c\/strong\u003e on oversized panels and long\n      parts. Built around a 3 kW Raycus or IPG fiber source and the FSCUT controller with CypCut CAM, this platform is\n      designed as a \u003cstrong\u003eworkhorse for mixed-metal, long-format sheet metal work\u003c\/strong\u003e.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__hero-grid\"\u003e\n      \u003cp class=\"umpro-product__hero-line\"\u003e\n        \u003cstrong\u003eLaser power:\u003c\/strong\u003e 3 kW fiber (Raycus \/ IPG) ·\n        \u003cstrong\u003eBed size:\u003c\/strong\u003e 6×20 ft (72×240\") ·\n        \u003cstrong\u003eController:\u003c\/strong\u003e FSCUT with CypCut CAM \/ nesting\n      \u003c\/p\u003e\n      \u003cp class=\"umpro-product__hero-line\"\u003e\n        \u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 ·\n        \u003cstrong\u003eHead:\u003c\/strong\u003e Auto-focus cutting head ·\n        \u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e \/ O\u003csub\u003e2\u003c\/sub\u003e \/ air (configuration dependent)\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cul class=\"umpro-product__hero-points\"\u003e\n      \u003cli\u003e3 kW fiber power for balanced speed, thickness capability, and operating cost\u003c\/li\u003e\n      \u003cli\u003eLong-format 6×20 ft working envelope for oversized panels and high-yield nests\u003c\/li\u003e\n      \u003cli\u003eFully enclosed, Class 1 safety cabinet with integrated fume extraction and chiller\u003c\/li\u003e\n      \u003cli\u003eFSCUT + CypCut for intelligent nesting, simulation, and repeatable job setup\u003c\/li\u003e\n      \u003cli\u003eDesigned as a primary long-format cutting asset for mixed-material production\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/header\u003e\n\n  \u003c!-- POSITIONING \/ VALUE FOR US BUYERS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 3 kW, 6×20 ft enclosed fiber laser is positioned as a\n      \u003cstrong\u003elong-format, mid-power production cell\u003c\/strong\u003e—ideal when you need the\n      \u003cstrong\u003enesting flexibility of 6×20 sheets\u003c\/strong\u003e plus enough power to cover a broad range of sheet and plate\n      work, without stepping into ultra high-power infrastructure and gas costs.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003e3 kW fiber laser (Raycus \/ IPG):\u003c\/strong\u003e delivers robust cutting performance across stainless, carbon\n        steel, aluminum, and brass in typical \u003cstrong\u003ejob shop thickness ranges\u003c\/strong\u003e. Offers a strong balance of\n        speed, quality, and consumable usage for multi-shift work.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003e6×20 ft (72×240\") long-format bed:\u003c\/strong\u003e supports oversized panels, machine chassis, structural\n        rails, and long architectural elements in a single setup. The extended nesting area enables\n        \u003cstrong\u003ehigh-yield nests and kit-based layouts\u003c\/strong\u003e that reduce scrap and handling.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFull-cover, Class 1 enclosure:\u003c\/strong\u003e interlocked, light-tight housing with viewing windows and\n        internal lighting. Simplifies safety planning and allows the cell to live in shared bays with press brakes,\n        weld cells, and assembly lines.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e tracks thickness changes and sheet warp over the entire 6×20 ft\n        envelope, keeping kerf width and edge quality consistent on long parts and mixed nests, minimizing manual\n        grinding and rework.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFSCUT controller with CypCut CAM:\u003c\/strong\u003e industrial motion and laser controller tied to CypCut\n        nesting, enabling intelligent nesting, lead-in\/out optimization, micro-joints, and simulation. Shortens\n        programming time and standardizes part flow for high-mix and repeat orders.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegrated fume extraction \u0026amp; industrial chiller:\u003c\/strong\u003e shipped as part of the package, not as a\n        separate project. Supports stable cut quality and uptime during long production shifts and continuous operation.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOptimized for mixed workloads:\u003c\/strong\u003e ideal for shops cutting primarily \u003cstrong\u003ethin to mid-gauge\n        materials with occasional heavier sections\u003c\/strong\u003e, where 3 kW provides headroom without oversizing the\n        power class.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegration-ready platform:\u003c\/strong\u003e designed to tie into upstream CAD and downstream forming, welding,\n        and assembly processes where large panels and long parts drive overall throughput.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- PERFORMANCE OVERVIEW --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--performance\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003ePerformance: 3 kW power · 6×20 ft long-format capacity\u003c\/h3\u003e\n    \u003cp\u003e\n      A \u003cstrong\u003e3 kW fiber source\u003c\/strong\u003e on a \u003cstrong\u003e6×20 ft platform\u003c\/strong\u003e is a strong fit for shops that want\n      \u003cstrong\u003ereal thickness capability\u003c\/strong\u003e beyond entry-level systems, while leveraging \u003cstrong\u003elong-format\n      nesting\u003c\/strong\u003e. It covers most day-to-day sheet and light plate work in fabrication, machinery, HVAC, and OEM\n      sectors, with power in reserve for heavier sections when needed.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__metrics-grid\"\u003e\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eTypical material coverage*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eCarbon\/mild steel: common sheet and plate gauges used in frames, panels, and structural parts\u003c\/li\u003e\n          \u003cli\u003eStainless steel: thin, mid-gauge, and select heavy sections for food, pharma, and architectural use\u003c\/li\u003e\n          \u003cli\u003eAluminum: panels and structural pieces for enclosures, machine frames, and HVAC components\u003c\/li\u003e\n          \u003cli\u003eBrass and copper alloys: defined thickness ranges with tuned parameters and safety practices\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *Specific thickness and speed combos depend on alloy, assist gas, and edge-quality targets; these are tuned\n          during the application review.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eThroughput characteristics*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eHigh linear speeds on thin and mid-gauge material at 3 kW with nitrogen or air\u003c\/li\u003e\n          \u003cli\u003eConfident cutting and piercing on heavier sections within the 3 kW working envelope\u003c\/li\u003e\n          \u003cli\u003eHigh part counts per sheet driven by the 6×20 ft nesting area, not just raw speed\u003c\/li\u003e\n          \u003cli\u003ePredictable cycle times once CypCut parameter libraries are tuned for your workload\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *Cycle times are best evaluated using your actual nests; we can generate estimates based onyour sample parts.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eQuality \u0026amp; repeatability*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eConsistent kerf and edge appearance across the full 6×20 ft working area\u003c\/li\u003e\n          \u003cli\u003eDimensional stability suited to downstream bending, welding, and assembly\u003c\/li\u003e\n          \u003cli\u003eRecipe-driven control for repeatable results across shifts and operators\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *Critical tolerances, hole quality, and edge finishes should be validated using your parts and fixturing.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- DETAILED TECHNICAL SPECIFICATIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 3 kW 6×20 enclosed fiber laser is delivered as a \u003cstrong\u003ecomplete long-format cutting cell\u003c\/strong\u003e.\n      Fiber source, motion platform, auto-focus head, controls, enclosure, extraction, and chiller are designed to work\n      together as an integrated system when installed to specification.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003c!-- LASER SOURCE --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eLaser power \u0026amp; source\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 3 kW fiber (Raycus or IPG)\u003c\/p\u003e\n        \u003cp\u003e\n          3 kW fiber is a \u003cstrong\u003esweet spot\u003c\/strong\u003e for many fabrication shops:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eSignificantly faster and more capable than entry-level power classes\u003c\/li\u003e\n          \u003cli\u003eAble to handle a wide span of sheet and plate thicknesses in everyday production\u003c\/li\u003e\n          \u003cli\u003eMaintains more manageable gas usage and infrastructure requirements than very high-power systems\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Raycus and IPG both provide stable, industrial-grade sources, with service models appropriate for multi-shift\n          environments.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- WORKING ENVELOPE --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eWorking envelope\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eBed size \/ stroke:\u003c\/strong\u003e 6×20 ft (72×240\") nominal working area\u003c\/p\u003e\n        \u003cp\u003e\n          The 6×20 format is chosen when you:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eBuild long machine frames, chassis, or architectural elements\u003c\/li\u003e\n          \u003cli\u003eWant to nest all parts for a large assembly on a single sheet for kitted flow\u003c\/li\u003e\n          \u003cli\u003eNeed maximum part yield from long blanks or coil-fed material cut to 20 ft\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          CypCut supports defining and reusing remnant shapes so leftover material from 6×20 sheets can be tapped for\n          future work.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CONTROLLER \/ CAM --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eController \u0026amp; CAM \/ nesting\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eControl:\u003c\/strong\u003e FSCUT fiber laser motion control\u003c\/p\u003e\n        \u003cp\u003e\u003cstrong\u003eSoftware:\u003c\/strong\u003e CypCut CAM \/ nesting for flat sheet\u003c\/p\u003e\n        \u003cp\u003e\n          Together, FSCUT and CypCut provide a mature platform for large nests and varied part mixes:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eDXF\/STEP import, part library management, and revision control\u003c\/li\u003e\n          \u003cli\u003eAutomatic and interactive nesting on 6×20 blanks and custom remnant sizes\u003c\/li\u003e\n          \u003cli\u003eLead-in\/out, micro-joints, common-line cutting, and skeleton reduction strategies\u003c\/li\u003e\n          \u003cli\u003eCut-sequence and pierce optimization to manage heat and minimize warpage\u003c\/li\u003e\n          \u003cli\u003eOn-screen simulation to verify toolpaths before running long-format nests\u003c\/li\u003e\n          \u003cli\u003eReal-time diagnostics for I\/O, drives, and laser interlocks\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Because FSCUT\/CypCut are widely used, many operators and programmers will recognize the interface, reducing\n          training time.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CUTTING HEAD --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eCutting head \u0026amp; auto-focus\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Auto-focus fiber cutting head with capacitive height sensing\u003c\/p\u003e\n        \u003cp\u003e\n          The cutting head is designed to maintain stability and quality throughout the long-format workspace:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eMotorized focus axis changes focus automatically by material and thickness recipe\u003c\/li\u003e\n          \u003cli\u003eCapacitive height sensing maintains standoff distance over long toolpaths and warped sheets\u003c\/li\u003e\n          \u003cli\u003eMixed nests with multiple thicknesses are easier to manage via parameter sets\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Standardized CypCut libraries link focus height, feed rate, and gas pressure to each cut parameter set.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ENCLOSURE \/ SAFETY --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eEnclosure \u0026amp; safety\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover Class 1 safety enclosure with interlocks\u003c\/p\u003e\n        \u003cp\u003e\n          The enclosure is designed for both \u003cstrong\u003esafety\u003c\/strong\u003e and \u003cstrong\u003eserviceability\u003c\/strong\u003e:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eInterlocked doors that halt laser cutting if opened or improperly latched\u003c\/li\u003e\n          \u003cli\u003eViewing panels to monitor pierce behavior and cut quality without opening doors\u003c\/li\u003e\n          \u003cli\u003eInterior access points for cleaning, maintenance, and fine adjustments\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Class 1 operation helps confine beam hazards to inside the machine during normal use, simplifying PPE needs\n          for nearby personnel.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- UTILITIES \/ CHILLER \/ EXTRACTION --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eUtilities, chiller \u0026amp; fume extraction\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e industrial chiller and integrated fume extraction\u003c\/p\u003e\n        \u003cp\u003e\n          Long-format cutting at 3 kW still demands reliable cooling and air management:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eDedicated chiller loops maintain laser source and optics within specified temperature ranges\u003c\/li\u003e\n          \u003cli\u003eFume extraction collects smoke and particulates from the cutting zone and sends them to your exhaust\/filtration\u003c\/li\u003e\n          \u003cli\u003eStable thermal and environmental conditions support consistent edge quality and component life\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ASSIST GASES --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eAssist gases \u0026amp; process strategy\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, and air (configuration dependent)\u003c\/p\u003e\n        \u003cp\u003e\n          3 kW systems benefit from well-chosen gas strategies for each material and thickness:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003e\n            \u003cstrong\u003eOxygen:\u003c\/strong\u003e high-speed cutting on mild steel with oxide edges; often used when parts will be\n            painted or when speed is the primary objective.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            \u003cstrong\u003eNitrogen:\u003c\/strong\u003e oxide-free edges on stainless and aluminum, and clean edges on mild steel for\n            weld-ready or cosmetic surfaces.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            \u003cstrong\u003eAir:\u003c\/strong\u003e lower-cost option for certain thicknesses and materials where a light oxide tint is\n            acceptable and the focus is cost per part.\n          \u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          During application review, we help choose gas strategies that align with your quality requirements and cost\n          targets.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- MOTION SYSTEM --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eMotion system \u0026amp; structure\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eMotion:\u003c\/strong\u003e servo-driven gantry with precision linear guides\u003c\/p\u003e\n        \u003cp\u003e\n          The motion platform is tuned for long-format accuracy and smooth interpolation:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eSmooth acceleration and deceleration on long toolpaths across the 20 ft axis\u003c\/li\u003e\n          \u003cli\u003eConsistent feature geometry for holes, slots, and complex contours\u003c\/li\u003e\n          \u003cli\u003eMechanical robustness suitable for multi-shift job shop and OEM production\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ELECTRICAL \/ FOOTPRINT --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eElectrical \u0026amp; footprint (high level)\u003c\/h4\u003e\n        \u003cp\u003e\n          Detailed electrical and layout information is provided with quotations and pre-install documentation. At a\n          high level, the system is designed for:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eUS industrial 3-phase power sized for a 3 kW laser, chiller, and motion\/control loads\u003c\/li\u003e\n          \u003cli\u003eFloor space and clearances compatible with 20 ft sheet loading and operator access\u003c\/li\u003e\n          \u003cli\u003eRigging paths capable of moving a long-format enclosed system into its final position\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Pre-install planning ensures power, gas, exhaust, and space constraints are resolved before the machine\n          arrives on-site.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cp class=\"umpro-product__note\"\u003e\n      \u003cem\u003e\n        Real-world cutting capacity, tolerances, and cycle times depend on alloy, assist gas, nozzle choice, nesting,\n        and edge-quality expectations. We recommend validating critical jobs on your materials before setting internal\n        standards and quoting assumptions.\n      \u003c\/em\u003e\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- APPLICATIONS \/ USE CASES --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003e\n      The 3 kW, 6×20 ft Umprotech enclosed fiber laser is typically deployed as a\n      \u003cstrong\u003elong-format core asset\u003c\/strong\u003e for fabrication cells, OEM lines, and job shops processing oversized\n      panels and long parts. It can function as a standalone laser cell or as the cutting front-end to forming, welding,\n      and assembly workflows.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__usecases-grid\"\u003e\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eOversized panels \u0026amp; enclosures\u003c\/h4\u003e\n        \u003cp\u003e\n          Cutting long cabinet sides, doors, back panels, and structural skins for electrical enclosures, kiosks, and\n          large control cabinets, with accurate feature positioning for bending and assembly.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eMachine chassis \u0026amp; frames\u003c\/h4\u003e\n        \u003cp\u003e\n          Producing base plates, side frames, and long structural elements for machinery, material handling systems,\n          and custom equipment, all from 6×20 sheets to reduce seams and weld joints.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eStructural sheet \u0026amp; bracket work\u003c\/h4\u003e\n        \u003cp\u003e\n          High-yield nests of brackets, frames, mounting plates, and stiffeners for contract manufacturing and OEM\n          product lines, with features and edges tuned for downstream welding and assembly.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eArchitectural \u0026amp; building components\u003c\/h4\u003e\n        \u003cp\u003e\n          Long-format screens, cladding elements, decorative panels, and building hardware produced in stainless,\n          carbon steel, or aluminum, where 6×20 sheets and 3 kW power reduce handling and unit cost.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eHVAC, ducting \u0026amp; building systems\u003c\/h4\u003e\n        \u003cp\u003e\n          Cutting long duct sections, plenums, mounts, and support rails with consistent geometry and edge quality\n          suitable for rapid installation in the field.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eOEM kit-based production\u003c\/h4\u003e\n        \u003cp\u003e\n          Nesting entire assemblies on a single 6×20 blank—combining large panels, brackets, and small components—to\n          create kitted sets that flow efficiently to bending, hardware insertion, and welding cells.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eHigh-mix \/ low-volume and prototyping\u003c\/h4\u003e\n        \u003cp\u003e\n          Supporting engineering changes and prototypes along with repeat jobs, using CypCut libraries and nesting\n          strategies to keep programming overhead manageable even on complex 6×20 nests.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eIntegration into automated cells\u003c\/h4\u003e\n        \u003cp\u003e\n          Serving as the cutting engine in cells paired with automated load\/unload, towers, press brakes, and robotic\n          weld cells, where 3 kW power and 6×20 nests help drive overall cell throughput.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cp\u003e\n      In many plants, the 3 kW 6×20 platform becomes the \u003cstrong\u003eprimary long-format machine\u003c\/strong\u003e, while smaller\n      or higher-power lasers handle complementary workloads (thick plate, small-part overflow, or prototype-only work).\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- CONFIGURATIONS \u0026 OPTIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 3 kW 6×20 enclosed fiber laser is supplied as a \u003cstrong\u003ecomplete, production-ready long-format\n      cell\u003c\/strong\u003e. All core systems—3 kW fiber source, auto-focus head, enclosure, extraction, chiller, and FSCUT\n      control with CypCut—are standard. Configuration options help align the machine with your standards and workload.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFiber source options:\u003c\/strong\u003e 3 kW Raycus or 3 kW IPG, chosen based on your existing fleet,\n        internal standards, or service preferences.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAssist gas configuration:\u003c\/strong\u003e support for N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, and air\n        (configuration dependent). We can advise on tank, line, and regulator sizing for your duty cycle and materials.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eControl stack:\u003c\/strong\u003e FSCUT controller with CypCut CAM\/nesting, included as standard—no separate\n        CAM purchase required for typical flat-sheet work and simulation.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eCutting head:\u003c\/strong\u003e auto-focus fiber cutting head supplied with parameter libraries arranged by\n        material, thickness, and assist gas.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eEnclosure \u0026amp; extraction:\u003c\/strong\u003e full-cover Class 1 enclosure plus integrated fume extraction\n        included as standard, simplifying safety and air handling design.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIndustrial chiller:\u003c\/strong\u003e included and sized for 3 kW duty with continuous operation in production\n        environments.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eElectrical \u0026amp; utilities:\u003c\/strong\u003e available in configurations compatible with common US industrial\n        voltages; specifics confirmed during the quoting and planning process.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegration \u0026amp; automation support:\u003c\/strong\u003e optional guidance for tying the 6×20 cell into material\n        handling systems, towers, conveyors, and downstream fabrication steps.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp\u003e\n      For specialized requirements—unique alloys, detailed OEM specifications, or defined automated cell layouts—we\n      collaborate with your engineering and operations teams to specify a 3 kW 6×20 configuration that matches your\n      production and cost objectives.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- IMPLEMENTATION \u0026 SUPPORT --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003e\n      Introducing a \u003cstrong\u003e3 kW 6×20 long-format fiber laser\u003c\/strong\u003e is both a capacity and workflow decision.\n      We support US job shops, OEMs, and integrators from early evaluation through commissioning and ramp-up, focusing\n      on \u003cstrong\u003ereal parts, realistic run times, and practical material handling plans\u003c\/strong\u003e.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePre-installation planning:\u003c\/strong\u003e review of power, ground, assist gas (N\u003csub\u003e2\u003c\/sub\u003e\/O\u003csub\u003e2\u003c\/sub\u003e\/air),\n        exhaust routing, floor space, rigging paths, and sheet-handling strategy before machine arrival.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePart \u0026amp; material review:\u003c\/strong\u003e assessment of representative parts, alloys, thicknesses, and\n        annual volumes to confirm that a 3 kW 6×20 cell is the right fit and to frame realistic throughput expectations.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eCypCut workflow setup:\u003c\/strong\u003e guidance on folder structures, part naming, nesting rules, and\n        parameter libraries to align the laser cell with your CAD\/ERP\/MES workflows.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOperator \u0026amp; maintenance training:\u003c\/strong\u003e training on safe operation, job loading, quality checks,\n        routine maintenance, and basic troubleshooting for FSCUT\/CypCut systems in a long-format environment.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOngoing process support:\u003c\/strong\u003e help with new materials, parameter optimization, nesting improvements,\n        and integration questions as you expand usage of the 3 kW 6×20 cell.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp class=\"umpro-product__cta\"\u003e\n      \u003cstrong\u003eNext step:\u003c\/strong\u003e send representative part files (DXF\/STEP\/PDF) along with your material\/thickness\n      range and approximate volumes. We’ll review fit, estimate cycle times, and recommend a 3 kW 6×20 configuration\n      and assist-gas strategy aligned with your production and ROI targets.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- TECHNICAL FAQ --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--faq umpro-product-faq\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eTechnical FAQ – 3 kW · 6×20 ft enclosed fiber laser\u003c\/h3\u003e\n\n    \u003cdiv class=\"umpro-product-faq__grid\"\u003e\n      \u003c!-- FAQ 1 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          When is a 3 kW 6×20 platform the right choice versus 2 kW or 6–12 kW systems?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            A 3 kW 6×20 system is ideal when you:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eCut a broad mix of materials and thicknesses, not just thin sheet\u003c\/li\u003e\n            \u003cli\u003eNeed long-format nesting for large panels, chassis, or kit-based production\u003c\/li\u003e\n            \u003cli\u003eWant more power and speed than 2 kW provides, but don’t require ultra high-power plate capacity\u003c\/li\u003e\n            \u003cli\u003ePlan to run significant hours on the laser where throughput and cost balance both matter\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            If thick-plate throughput is critical, higher-power options may be recommended. If your workload is mostly\n            thin-gauge sheet at modest volumes, 2 kW might be more cost-effective.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 2 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What thickness range can we realistically expect to handle with 3 kW on a 6×20 bed?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            3 kW systems are intended to cover \u003cstrong\u003ethin sheet through moderate plate thicknesses\u003c\/strong\u003e in\n            carbon steel, stainless, and aluminum used in general fabrication, machinery, and HVAC work. The exact\n            range depends on:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eMaterial grade and surface condition\u003c\/li\u003e\n            \u003cli\u003eAssist gas type, pressure, and flow capability\u003c\/li\u003e\n            \u003cli\u003eDesired edge quality and whether parts are welded, painted, or further machined\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            During application review, we define working thickness guidelines and may recommend sample cutting for your\n            most critical materials and dimensions.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 3 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How does 3 kW power influence operating cost compared to 2 kW or 6 kW?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            3 kW can reduce cutting and pierce times versus 2 kW, especially on thicker materials, while typically\n            requiring less infrastructure and gas usage than 6 kW or above. In many shops:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eElectricity per part decreases vs 2 kW due to shorter cut times on certain jobs\u003c\/li\u003e\n            \u003cli\u003eAssist gas consumption per minute rises modestly vs 2 kW, but gas per part may improve\u003c\/li\u003e\n            \u003cli\u003eTotal cost per part sits between 2 kW and high-power systems, often offering a favorable ROI\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            The best choice depends on your thickness mix, hours of utilization, and quality requirements.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 4 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Does the 6×20 length introduce accuracy or consistency issues at the far end of the table?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            The system is designed to maintain accuracy and repeatability over the full 6×20 envelope using servo drives\n            and precision linear guidance. In practice, long-format performance depends on:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eProper installation, leveling, and base alignment\u003c\/li\u003e\n            \u003cli\u003eRegular mechanical inspection, calibration, and maintenance\u003c\/li\u003e\n            \u003cli\u003eAppropriate cutting parameters and sequences for long toolpaths\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Commissioning includes verification of accuracy and cut quality at multiple points across the table using\n            test patterns and representative parts.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 5 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How does CypCut manage large 6×20 nests and remnants in a job shop environment?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            CypCut includes tools specifically useful for long-format and high-yield workflows, such as:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eAutomatic nesting with constraints and part priorities across the full 6×20 sheet\u003c\/li\u003e\n            \u003cli\u003eManual refinement and grouping of part families or kits within a nest\u003c\/li\u003e\n            \u003cli\u003eRemnant definition and reuse, so partial sheets can be tracked and consumed efficiently\u003c\/li\u003e\n            \u003cli\u003eCommon-line and skeleton-reduction options to minimize scrap and cutting time\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We can help set up nesting and remnant practices that align with your internal material management processes.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 6 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What facility requirements should we plan for with a 3 kW 6×20 installation?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Key facility considerations include:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eSufficient 3-phase power capacity for the laser, chiller, and controls\u003c\/li\u003e\n            \u003cli\u003eAssist gas supply sized for your expected duty cycle and thickness range\u003c\/li\u003e\n            \u003cli\u003eExhaust or filtration sized for the fume volume from long-format cutting\u003c\/li\u003e\n            \u003cli\u003eFloor space, rigging access, and material-handling equipment suited to 20 ft sheets\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Pre-install documentation outlines these requirements in detail and is reviewed with your facilities team.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 7 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How complex is operator training on a 3 kW 6×20 FSCUT \/ CypCut system?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Operators with CNC or prior laser experience typically adapt quickly. Training focuses on:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eSafe operation of a Class 1 enclosed long-format system\u003c\/li\u003e\n            \u003cli\u003eConsistent loading, alignment, and clamping of 6×20 sheets\u003c\/li\u003e\n            \u003cli\u003eNest selection, parameter library usage, and minor adjustments\u003c\/li\u003e\n            \u003cli\u003eRecognizing cut-quality issues, alarms, and appropriate first-line responses\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Clear procedures and standardized cut recipes help multiple operators share the machine while maintaining\n            quality and throughput.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 8 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What does routine maintenance look like on a 3 kW long-format cell?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Routine maintenance tasks typically include:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eInspecting and replacing nozzles and protective windows at defined intervals\u003c\/li\u003e\n            \u003cli\u003eChecking assist gas filters, hoses, and regulators for contamination and leaks\u003c\/li\u003e\n            \u003cli\u003eMonitoring chiller performance, fluid condition, and alarm history\u003c\/li\u003e\n            \u003cli\u003eCleaning the cutting table, removing slag, and inspecting motion components\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We supply maintenance schedules and checklists, and training covers how to carry out these tasks safely.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 9 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How does the Class 1 enclosure influence our safety and PPE policies?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            The Class 1 enclosure is designed to contain the beam and process light during normal operation. In many\n            shops, this means:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eLaser eyewear is mainly needed for certain maintenance or service tasks\u003c\/li\u003e\n            \u003cli\u003eDaily operation emphasizes interlock checks, viewing through windows, and lockout\/tagout procedures\u003c\/li\u003e\n            \u003cli\u003eThe cell can be located in shared bays with other fabrication equipment, subject to internal policies\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We can provide documentation and example procedures to support your internal EHS review and training.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 10 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Can the 3 kW 6×20 cell integrate with our existing CAD\/ERP\/MES systems?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Yes. A common pattern is:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eGeometry and revisions managed in your CAD and PLM systems\u003c\/li\u003e\n            \u003cli\u003eFlat patterns exported as DXF\/STEP using part and revision naming aligned with ERP\/MES\u003c\/li\u003e\n            \u003cli\u003eCypCut imports these files for nesting, parameter assignment, and simulation\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We help define folder structures, naming conventions, and job-release steps so the laser cell fits smoothly\n            into your scheduling and reporting workflows.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 11 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How do we evaluate whether a 3 kW 6×20 configuration is the right move for our shop?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            The decision should be based on your \u003cstrong\u003ecurrent and projected part mix, bottlenecks, and growth\n            plans\u003c\/strong\u003e. In an evaluation, we typically review:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eDistribution of part sizes and thicknesses, especially long parts and large panels\u003c\/li\u003e\n            \u003cli\u003eCurrent cutting capacity and where laser throughput is constraining output\u003c\/li\u003e\n            \u003cli\u003eQuality, cosmetic, and tolerance requirements on your most critical parts\u003c\/li\u003e\n            \u003cli\u003eROI scenarios comparing 3 kW 6×20 with alternatives (2 kW, 6×12, or higher-power machines)\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Based on this analysis and cut tests on your materials, we can recommend whether a 3 kW 6×20 cell should be\n            your primary long-format asset or part of a broader multi-laser strategy.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n    \u003c\/div\u003e\n\n    \u003cp class=\"umpro-product-faq__closing\"\u003e\n      \u003cstrong\u003eStill evaluating a 3 kW 6×20 platform?\u003c\/strong\u003e\n      Share representative part files and your material\/thickness distribution. We’ll prepare a focused assessment and\n      configuration recommendation for your 3 kW 6×20 enclosed fiber laser cell, including expected cycle times, nesting\n      strategies, and workflow integration options.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e\n","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966016024942,"sku":"UFL-6x20-3KW-ENC","price":199900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-12kw-enclosed-fiber-laser-cutter-6x20ft-fscut-5723155.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-6kw-6x20ft","title":"Umprotech Enclosed Fiber Laser Cutter 6kW 6×20 ft FSCUT","description":"\u003csection class=\"umpro-product umpro-product--flagship\"\u003e\n  \u003c!-- HERO \/ OVERVIEW --\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003cp class=\"umpro-product__eyebrow\"\u003eHigh-Power Enclosed Fiber Laser · Long-Format 6×20 Platform\u003c\/p\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003e\n      Umprotech Enclosed Fiber Laser Cutter – 6 kW · 6×20 ft · FSCUT \/ CypCut\n    \u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003e\n      A fully enclosed, \u003cstrong\u003elong-format 6 kW fiber laser cutting system\u003c\/strong\u003e engineered for US job shops,\n      OEMs, and fabrication cells that need \u003cstrong\u003ehigh power, repeatable accuracy, and safe processing of oversized\n      sheets\u003c\/strong\u003e. Built around a 6 kW Raycus or IPG fiber source, a 6×20 ft (72×240\") bed, and FSCUT motion control\n      with CypCut CAM, this platform is designed as a \u003cstrong\u003ehigh-throughput cutting cell\u003c\/strong\u003e for stainless, carbon\n      steel, aluminum, and brass in demanding production environments.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__hero-grid\"\u003e\n      \u003cp class=\"umpro-product__hero-line\"\u003e\n        \u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber (Raycus \/ IPG) ·\n        \u003cstrong\u003eBed size:\u003c\/strong\u003e 6×20 ft (72×240\") ·\n        \u003cstrong\u003eController:\u003c\/strong\u003e FSCUT with CypCut CAM \/ nesting\n      \u003c\/p\u003e\n      \u003cp class=\"umpro-product__hero-line\"\u003e\n        \u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 ·\n        \u003cstrong\u003eHead:\u003c\/strong\u003e Auto-focus cutting head ·\n        \u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e \/ O\u003csub\u003e2\u003c\/sub\u003e \/ air (configuration dependent)\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cul class=\"umpro-product__hero-points\"\u003e\n      \u003cli\u003e6 kW fiber power for high cutting speeds and heavier plate capability\u003c\/li\u003e\n      \u003cli\u003eLong-format 6×20 ft bed for oversized panels, chassis, and high-yield nests\u003c\/li\u003e\n      \u003cli\u003eFully enclosed Class 1 safety cabinet with integrated fume extraction and chiller\u003c\/li\u003e\n      \u003cli\u003eFSCUT + CypCut stack for intelligent nesting, simulation, and diagnostic tools\u003c\/li\u003e\n      \u003cli\u003eDesigned as a flagship long-format cell for demanding throughput and repeatability\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/header\u003e\n\n  \u003c!-- POSITIONING \/ VALUE FOR US BUYERS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 6 kW, 6×20 ft enclosed fiber laser is positioned as a\n      \u003cstrong\u003ehigh-power, long-format cutting platform\u003c\/strong\u003e for US fabricators who regularly process\n      \u003cstrong\u003elarge sheets and heavier gauges\u003c\/strong\u003e. It is ideal where the limit is no longer sheet size or nesting\n      density, but \u003cstrong\u003ethroughput, pierce time, and plate thickness capability\u003c\/strong\u003e, all within a safe,\n      fully enclosed Class 1 environment.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003e6 kW fiber source (Raycus \/ IPG):\u003c\/strong\u003e delivers the power headroom required for fast cutting in\n        thicker steels and higher-speed processing of thin and mid-gauge material. Suitable for mixed workloads\n        combining sheet and plate in stainless, carbon steel, aluminum, and brass.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOversized 6×20 ft (72×240\") bed:\u003c\/strong\u003e supports large panels, machine chassis, architectural\n        elements, and high-yield nesting. Long-format sheets allow \u003cstrong\u003ekit-based nesting\u003c\/strong\u003e of entire\n        assemblies on a single blank, reducing handling and staging.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFull-cover, Class 1 enclosure:\u003c\/strong\u003e interlocked, light-tight cabinet with viewing windows and\n        internal lighting. Simplifies safety compliance and allows the cell to operate near press brakes, weld cells,\n        and assembly lines without exposing personnel to open-beam hazards.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e automatically adjusts focus height for each material\/thickness\n        recipe and compensates for sheet warp across the 20 ft length. Helps maintain kerf quality and edge consistency,\n        reducing grinding and rework on long parts and nested kits.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFSCUT controller with CypCut CAM:\u003c\/strong\u003e a proven industrial control stack that supports intelligent\n        nesting, advanced lead-in\/out strategies, micro-joints, simulation, and integrated diagnostics. Designed for\n        high-mix, multi-shift environments where uptime and repeatability are critical.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegrated fume extraction and industrial chiller:\u003c\/strong\u003e included as standard to stabilize laser\n        performance and maintain shop air quality. Proper cooling and fume management are essential for 6 kW, multi-shift\n        workloads and continuous cutting on large-format sheets.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFuture-ready for automation:\u003c\/strong\u003e the 6×20 footprint and high power level are well suited to pairing\n        with automated loading, towers, conveyors, and robotic downstream processes—building a path toward lights-out\n        or semi-automated fabrication cells.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eConfigured around real US production realities:\u003c\/strong\u003e gas strategy, electrical options, and layout\n        guidance tailored for US shop infrastructure and typical fabrication workflows.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- PERFORMANCE OVERVIEW --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--performance\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003ePerformance: 6 kW power · 6×20 ft long-format throughput\u003c\/h3\u003e\n    \u003cp\u003e\n      A \u003cstrong\u003e6 kW fiber source\u003c\/strong\u003e on a \u003cstrong\u003e6×20 ft platform\u003c\/strong\u003e enables both high-speed cutting on\n      thinner materials and capable processing of heavier plate. For many shops, this power class transforms the 6×20\n      machine into a \u003cstrong\u003eprimary production asset\u003c\/strong\u003e for both sheet and plate work across multiple alloys.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__metrics-grid\"\u003e\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eTypical material and thickness envelope*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eCarbon\/mild steel: thin sheet up through heavy plate ranges commonly used in structural and machinery work\u003c\/li\u003e\n          \u003cli\u003eStainless steel: thin and mid-gauge, plus selected heavy sections for process, architectural, and OEM applications\u003c\/li\u003e\n          \u003cli\u003eAluminum: panels, frames, and thicker structural pieces, subject to alloy and gas strategy\u003c\/li\u003e\n          \u003cli\u003eBrass and copper alloys: defined ranges with tuned parameters and suitable safety practices\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *Exact thickness capacities and speed windows are confirmed during application review using your alloys,\n          assist gases, and edge-quality requirements.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eThroughput characteristics*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eMarkedly faster pierce and cut speeds than mid-power systems, especially on thicker material\u003c\/li\u003e\n          \u003cli\u003eImproved cycle times on thin and mid-gauge sheets due to higher power and optimized gas strategies\u003c\/li\u003e\n          \u003cli\u003eHigh part output per sheet driven by 6×20 nesting, combined with 6 kW power for fast execution\u003c\/li\u003e\n          \u003cli\u003eCapacity to move high-volume, heavy parts off plasma or oxy-fuel and onto fiber where appropriate\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *Representative cycle-time estimates can be generated from your DXF\/STEP nests and expected lot sizes.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eQuality \u0026amp; consistency*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eClean edges suitable for welding, painting, or cosmetic finishing, depending on gas and parameters\u003c\/li\u003e\n          \u003cli\u003eConsistent part geometry and hole quality across the full 6×20 working area\u003c\/li\u003e\n          \u003cli\u003eRecipe-based approach in CypCut for cross-shift repeatability and controlled process variation\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *Critical tolerances, micro-features, and edge finishes should be validated on sample parts with tuned\n          cut parameters and fixturing.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- DETAILED TECHNICAL SPECIFICATIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 6 kW 6×20 enclosed fiber laser is supplied as a \u003cstrong\u003ecomplete high-power long-format cutting\n      cell\u003c\/strong\u003e. The fiber source, motion platform, cutting head, controller, enclosure, extraction, and chiller are\n      designed to work together as a cohesive system, ready to be integrated into your shop once utilities are prepared.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003c!-- LASER SOURCE --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eLaser power \u0026amp; source\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber (Raycus or IPG options)\u003c\/p\u003e\n        \u003cp\u003e\n          6 kW is a \u003cstrong\u003ehigh-power class\u003c\/strong\u003e intended for shops that:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eRoutinely cut heavier material where pierce time and speed matter\u003c\/li\u003e\n          \u003cli\u003eWant to move more plate work onto fiber from plasma or oxy-fuel\u003c\/li\u003e\n          \u003cli\u003eRequire increased throughput on thin and mid-gauge sheet at high utilization\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Established industrial suppliers (Raycus, IPG) provide stable power delivery, monitoring, and service\n          infrastructures suited to multi-shift production environments.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- WORKING ENVELOPE --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eWorking envelope\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eBed size \/ stroke:\u003c\/strong\u003e 6×20 ft (72×240\") nominal working area\u003c\/p\u003e\n        \u003cp\u003e\n          The oversized bed is designed for:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eLarge panels and skins that exceed 6×12 sheet capabilities\u003c\/li\u003e\n          \u003cli\u003eLong rails, frames, and chassis members cut in one piece\u003c\/li\u003e\n          \u003cli\u003eHigh-yield nests combining many smaller parts on a single long-format blank\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          CypCut supports creating and managing remnant shapes so partially used 6×20 sheets can be tracked and reused.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CONTROLLER \/ CAM --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eController \u0026amp; CAM \/ nesting\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eControl:\u003c\/strong\u003e FSCUT fiber laser motion controller\u003c\/p\u003e\n        \u003cp\u003e\u003cstrong\u003eSoftware:\u003c\/strong\u003e CypCut CAM \/ nesting for flat sheet\u003c\/p\u003e\n        \u003cp\u003e\n          The control stack is optimized for \u003cstrong\u003ehigh-mix, high-power flat-sheet production\u003c\/strong\u003e:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eDXF\/STEP import with part library management and revisioning\u003c\/li\u003e\n          \u003cli\u003eAutomatic and manual nesting on full 6×20 sheets and remnants\u003c\/li\u003e\n          \u003cli\u003eAdvanced lead-in\/out strategies, micro-joints, and corner treatments\u003c\/li\u003e\n          \u003cli\u003eCommon-line cutting and skeleton reduction to minimize scrap and pierce counts\u003c\/li\u003e\n          \u003cli\u003eSimulation and path visualization ahead of production, critical on large nests\u003c\/li\u003e\n          \u003cli\u003eAlarms and diagnostic tools tied to drives, I\/O, and laser status\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Widespread adoption of FSCUT\/CypCut means experienced operators may already be familiar with the interface.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CUTTING HEAD --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eCutting head \u0026amp; auto-focus\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Auto-focus fiber cutting head with capacitive height control\u003c\/p\u003e\n        \u003cp\u003e\n          The cutting head is designed to keep 6 kW power under control across a long-format table:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eMotorized focus axis adjusts automatically for each material\/thickness recipe\u003c\/li\u003e\n          \u003cli\u003eCapacitive height sensing maintains stand-off over warped sheets and long parts\u003c\/li\u003e\n          \u003cli\u003eParameter libraries in CypCut tie focus, feed, and gas to each cut condition\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          This combination helps maintain \u003cstrong\u003econsistent edge quality and hole geometry\u003c\/strong\u003e even as you move\n          between thin sheet and heavier plate within the same working envelope.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ENCLOSURE \/ SAFETY --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eEnclosure \u0026amp; safety\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover Class 1 enclosure with interlocks\u003c\/p\u003e\n        \u003cp\u003e\n          The Class 1 cabinet is designed to integrate safely into busy production environments:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eInterlocked doors that stop cutting when opened or improperly latched\u003c\/li\u003e\n          \u003cli\u003eViewing panels to monitor pierce behavior, cut quality, and process stability\u003c\/li\u003e\n          \u003cli\u003eInterior lighting and access for cleaning and maintenance on a long-format bed\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Class 1 operation helps confine laser hazards to the interior in normal use, simplifying PPE requirements\n          around the machine and supporting compliance with typical plant safety policies.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- UTILITIES \/ CHILLER \/ EXTRACTION --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eUtilities, chiller \u0026amp; fume extraction\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e industrial chiller and integrated fume extraction\u003c\/p\u003e\n        \u003cp\u003e\n          At 6 kW, \u003cstrong\u003ecooling and fume control\u003c\/strong\u003e are critical:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eChiller circuits maintain laser and optics temperatures within specification under heavy loads\u003c\/li\u003e\n          \u003cli\u003eExtraction captures smoke and particulates near the cutting zone and routes them to your exhaust\/filtration\u003c\/li\u003e\n          \u003cli\u003eStable thermal and environmental control supports consistent cut quality and equipment life\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ASSIST GASES --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eAssist gases \u0026amp; process strategy\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, and air (configuration dependent)\u003c\/p\u003e\n        \u003cp\u003e\n          A 6 kW platform offers wide process flexibility when combined with the right gas strategy:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003e\n            \u003cstrong\u003eOxygen:\u003c\/strong\u003e high cutting speeds in mild steel, especially thicker sections, with an oxidized edge\n            often suitable for painted or post-processed parts.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            \u003cstrong\u003eNitrogen:\u003c\/strong\u003e bright, oxide-free edges on stainless and aluminum, and clean edges on mild steel\n            where weld-ready or cosmetic surfaces are needed.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            \u003cstrong\u003eAir:\u003c\/strong\u003e cost-focused option for specific materials and thicknesses where light oxide is acceptable\n            and cost-per-part must be minimized.\n          \u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          We help define gas supply and regulator requirements (cylinders vs bulk vs high-pressure air) based on your\n          mix of thicknesses and annual run hours.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- MOTION SYSTEM --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eMotion system \u0026amp; structure\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eMotion:\u003c\/strong\u003e servo-driven gantry with precision linear guides\u003c\/p\u003e\n        \u003cp\u003e\n          The motion platform is designed for \u003cstrong\u003elong-format accuracy under 6 kW loads\u003c\/strong\u003e:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eSmooth accelerations and decelerations on long toolpaths across the 20 ft axis\u003c\/li\u003e\n          \u003cli\u003eConsistent geometry for slots, holes, and complex profiles throughout the table\u003c\/li\u003e\n          \u003cli\u003eRobust structure intended for high utilization in OEM and contract manufacturing settings\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ELECTRICAL \/ FOOTPRINT --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eElectrical \u0026amp; footprint (high level)\u003c\/h4\u003e\n        \u003cp\u003e\n          Detailed electrical and layout information is provided in quotation and pre-install documentation. At a high level,\n          a 6 kW 6×20 platform is intended for:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eUS industrial 3-phase power sized for a 6 kW source, motion, and chiller loads\u003c\/li\u003e\n          \u003cli\u003eFloor space and clearances appropriate for 20 ft sheet handling and operator access\u003c\/li\u003e\n          \u003cli\u003eRigging paths capable of bringing an enclosed, long-format system into its operating position\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Pre-install planning ensures that power, gas, exhaust, and handling provisions are ready before the machine\n          arrives on your floor.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cp class=\"umpro-product__note\"\u003e\n      \u003cem\u003e\n        Actual cutting capacities, tolerances, and cycle times depend on alloy, thickness, assist gas, nozzle selection,\n        nesting, and edge-quality requirements. We recommend validating critical parts and thicknesses with your\n        materials before finalizing quoting assumptions and internal standards.\n      \u003c\/em\u003e\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- APPLICATIONS \/ USE CASES --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003e\n      The 6 kW, 6×20 ft Umprotech enclosed fiber laser is typically specified as a\n      \u003cstrong\u003eflagship long-format cutting cell\u003c\/strong\u003e for OEMs, contract manufacturers, and job shops where both\n      \u003cstrong\u003epart size and material thickness\u003c\/strong\u003e push beyond what mid-power systems can comfortably handle. It\n      integrates readily into fabrication cells alongside press brakes, saws, and robotic welding stations.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__usecases-grid\"\u003e\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eOversized panels \u0026amp; industrial enclosures\u003c\/h4\u003e\n        \u003cp\u003e\n          Long side panels, large doors, backplates, and structural skins for electrical enclosures, kiosks, and\n          machinery housings cut from full 6×20 sheets with one-piece geometry and accurate features for downstream\n          forming and assembly.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eChassis, frames \u0026amp; structural components\u003c\/h4\u003e\n        \u003cp\u003e\n          Cutting long base frames, machine beds, rails, and structural members in both sheet and heavier plate, taking\n          advantage of 6 kW power for penetration and speed while using 6×20 blanks to minimize splices and weld seams.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eOEM bracket and hardware kits\u003c\/h4\u003e\n        \u003cp\u003e\n          High-yield nests of brackets, gussets, mounting plates, and hardware components on 6×20 sheets for OEM\n          assemblies and machinery builds, balancing throughput and edge quality for weld-ready production.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eArchitectural \u0026amp; building systems\u003c\/h4\u003e\n        \u003cp\u003e\n          Architectural panels, cladding, long perforated screens, and building hardware produced in stainless, carbon\n          steel, or aluminum, where 6×20 sheets and 6 kW power help reduce part counts and installation time.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eHVAC, ducting \u0026amp; large-format plenums\u003c\/h4\u003e\n        \u003cp\u003e\n          Long duct sections, plenums, transitions, and structural supports, with high nesting efficiency on 6×20\n          blanks and cut edges tuned for fast assembly and sealing in the field.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eHigh-mix \/ low-volume \u0026amp; repeat production\u003c\/h4\u003e\n        \u003cp\u003e\n          Serves both as a \u003cstrong\u003ehigh-mix job shop tool\u003c\/strong\u003e (with CypCut nesting and parameter libraries) and a\n          \u003cstrong\u003erepeat-production machine\u003c\/strong\u003e for recurring kits, assemblies, and OEM part families.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eTransitioning plate work from plasma or oxy-fuel\u003c\/h4\u003e\n        \u003cp\u003e\n          For suitable thicknesses, the 6 kW platform enables a shift from thermal processes to fiber, improving edge\n          quality, distortion, and downstream fit-up, while often reducing post-processing time.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eAutomation-ready laser cells\u003c\/h4\u003e\n        \u003cp\u003e\n          Serving as the cutting engine in automated cells with towers, loaders, and robotic downstream processes. The\n          combination of 6 kW and a 6×20 bed offers substantial capacity and flexibility for integrated production lines.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cp\u003e\n      In many facilities, the 6 kW 6×20 system becomes the \u003cstrong\u003eprimary machine for large and heavy work\u003c\/strong\u003e,\n      with smaller or lower-power lasers handling short-run or small-part loads.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- CONFIGURATIONS \u0026 OPTIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 6 kW 6×20 enclosed fiber laser is delivered as a \u003cstrong\u003efully equipped, production-ready cutting\n      cell\u003c\/strong\u003e. All core systems—6 kW fiber source, auto-focus head, enclosure, extraction, chiller, and FSCUT\n      control with CypCut—are standard. Options allow the machine to be tailored to your preferred suppliers, gas\n      strategy, and integration needs.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFiber source options:\u003c\/strong\u003e 6 kW Raycus or 6 kW IPG, selected based on your installed base,\n        service preferences, and corporate standards.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAssist gas configuration:\u003c\/strong\u003e support for N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, and air\n        (configuration dependent), with guidance on supply infrastructure sized for 6 kW production duty.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eControl stack:\u003c\/strong\u003e FSCUT controller with CypCut CAM\/nesting included as standard—no separate\n        flat-sheet CAM purchase required for core programming and simulation needs.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e supplied as standard, with parameter libraries organized by material,\n        thickness, and assist gas to simplify daily operation.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eEnclosure \u0026amp; extraction:\u003c\/strong\u003e full-cover Class 1 enclosure and integrated fume extraction as\n        standard, simplifying safety and air-management planning.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIndustrial chiller:\u003c\/strong\u003e included and sized for 6 kW continuous operation, supporting stable beam\n        quality and component life.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eElectrical \u0026amp; utilities:\u003c\/strong\u003e available in configurations compatible with common US industrial\n        voltages; specifics finalized during quoting and site planning.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegration \u0026amp; automation support:\u003c\/strong\u003e optional consultation for material handling, tower or\n        loader integration, and downstream connection to forming and welding cells.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp\u003e\n      For specialized use cases—unique alloys, specific OEM specifications, or defined automated cell layouts—we work\n      with your engineering and operations teams to recommend a 6 kW 6×20 configuration aligned with your production,\n      quality, and ROI goals.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- IMPLEMENTATION \u0026 SUPPORT --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003e\n      Deploying a \u003cstrong\u003e6 kW, 6×20 ft long-format fiber laser\u003c\/strong\u003e involves both equipment and workflow\n      considerations. We support US job shops, OEMs, and integrators from early evaluation through commissioning,\n      focusing on \u003cstrong\u003ereal parts, realistic cycle times, and practical material handling plans\u003c\/strong\u003e.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePre-installation planning:\u003c\/strong\u003e review of available power, grounding, assist gas supply\n        (N\u003csub\u003e2\u003c\/sub\u003e\/O\u003csub\u003e2\u003c\/sub\u003e\/air), exhaust routing, floor layout, rigging paths, and sheet-handling concepts\n        tailored to 20 ft blanks.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePart \u0026amp; material review:\u003c\/strong\u003e evaluation of representative parts, alloys, and thickness ranges\n        to confirm that a 6 kW 6×20 platform addresses your bottlenecks and quality targets.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eCypCut workflow setup:\u003c\/strong\u003e guidance on job folders, naming conventions, nesting rules, and\n        parameter libraries so the laser cell ties cleanly into your CAD\/ERP\/MES environment.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOperator \u0026amp; maintenance training:\u003c\/strong\u003e training on safe operation of a high-power, long-format\n        Class 1 system, nesting workflows, quality checks, and routine mechanical and optical maintenance.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOngoing process support:\u003c\/strong\u003e assistance with new materials, thickness changes, nesting\n        improvements, gas strategy adjustments, and integration questions as you scale usage of the 6 kW 6×20 cell.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp class=\"umpro-product__cta\"\u003e\n      \u003cstrong\u003eNext step:\u003c\/strong\u003e send representative part files (DXF\/STEP\/PDF), your alloy and thickness ranges, and\n      approximate annual volumes. We’ll review fit, estimate cycle times, and recommend a 6 kW 6×20 configuration,\n      nesting approach, and assist-gas strategy aligned with your production and ROI targets.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- TECHNICAL FAQ --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--faq umpro-product-faq\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eTechnical FAQ – 6 kW · 6×20 ft enclosed fiber laser\u003c\/h3\u003e\n\n    \u003cdiv class=\"umpro-product-faq__grid\"\u003e\n      \u003c!-- FAQ 1 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          When should we choose a 6 kW 6×20 system instead of 3 kW or 12 kW platforms?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            A 6 kW 6×20 cell is typically recommended when you:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eRegularly cut mid-to-heavy plate alongside thinner sheet\u003c\/li\u003e\n            \u003cli\u003eWant significantly faster pierce and cut speeds than 3 kW on thicker work\u003c\/li\u003e\n            \u003cli\u003eUse a 6×20 bed for large parts or long rails and need high throughput\u003c\/li\u003e\n            \u003cli\u003eDon’t require the ultra high-power capabilities and infrastructure of 12 kW systems\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            For mostly thin sheet and moderate volumes, 3 kW might be sufficient. For extreme plate thickness and\n            maximum throughput, 12 kW may provide additional advantages—subject to gas and facility considerations.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 2 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What thicknesses can a 6 kW system realistically support?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            6 kW systems are designed to cover \u003cstrong\u003ethin sheet through relatively heavy plate ranges\u003c\/strong\u003e in\n            carbon steel, stainless, and aluminum for typical fabrication, machinery, and OEM work. The exact thickness\n            envelope depends on:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eMaterial grade and quality (e.g., mild vs high-strength steels, stainless types, aluminum alloys)\u003c\/li\u003e\n            \u003cli\u003eAssist gas type, pressure, and flow capability (N\u003csub\u003e2\u003c\/sub\u003e\/O\u003csub\u003e2\u003c\/sub\u003e\/air)\u003c\/li\u003e\n            \u003cli\u003eRequired edge quality, tolerance, and whether parts are welded, painted, or machined\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            During application review, we define recommended working ranges for each material and validate with sample\n            cuts where required.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 3 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How does 6 kW power affect operating cost compared to 3 kW and 12 kW?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            6 kW generally provides \u003cstrong\u003eshorter cycle times\u003c\/strong\u003e than 3 kW, especially on thicker materials,\n            at the cost of higher power and gas usage. Compared to 12 kW, it often offers:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eLower peak power draw and less demanding gas infrastructure\u003c\/li\u003e\n            \u003cli\u003eMore favorable cost-per-part when ultra high-power capacity would be underutilized\u003c\/li\u003e\n            \u003cli\u003eA good balance between throughput, complexity, and operating cost for mixed workloads\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            The most economical choice depends on your thickness mix, hours of utilization, and expected growth in plate work.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 4 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Will the 6×20 length impact accuracy or repeatability at the far end of the bed?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            The machine is designed to maintain accuracy and repeatability across the entire 6×20 envelope using servo\n            drives and precision linear guides. In practice, performance depends on:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eProper installation, leveling, and base alignment\u003c\/li\u003e\n            \u003cli\u003eRoutine calibration and mechanical inspection\u003c\/li\u003e\n            \u003cli\u003eAppropriate cutting strategies for long parts and large nests\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Commissioning includes verification of cut geometry and positioning at multiple points along the table with\n            test patterns and representative parts.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 5 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How does CypCut handle large 6×20 nests and remnant usage?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            CypCut provides features well suited to long-format, high-yield cutting, including:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eAutomatic nesting with part priority, rotation, and clearance rules\u003c\/li\u003e\n            \u003cli\u003eManual refinement for kits and assemblies on a single 6×20 sheet\u003c\/li\u003e\n            \u003cli\u003eRemnant definition so partially used sheets can be stored and reused later\u003c\/li\u003e\n            \u003cli\u003eCommon-line cutting and skeleton-reduction options for scrap and time savings\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We can help configure nesting and remnant practices that align with your internal material management and ERP systems.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 6 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What facility requirements should we plan for a 6 kW 6×20 installation?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Key facility considerations for a high-power long-format cell include:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eAdequate 3-phase power capacity and distribution for a 6 kW laser, chiller, and motion\/control\u003c\/li\u003e\n            \u003cli\u003eAssist gas supply sized for your thickness ranges and daily duty cycle\u003c\/li\u003e\n            \u003cli\u003eExhaust or filtration sized for the fume volume from continuous long-format cutting\u003c\/li\u003e\n            \u003cli\u003eFloor space, rigging access, and material handling equipment suitable for 20 ft sheets\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Pre-install documentation covers these items and is reviewed with your maintenance and facilities teams.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 7 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How complex is training for operators and programmers on a 6 kW FSCUT \/ CypCut system?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Operators with CNC or laser experience typically adapt quickly to FSCUT\/CypCut. Training focuses on:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eSafe operation of a high-power, Class 1 enclosed long-format machine\u003c\/li\u003e\n            \u003cli\u003eLoading, aligning, and securing 6×20 sheets and monitoring cut quality\u003c\/li\u003e\n            \u003cli\u003eNest selection, parameter libraries, and basic adjustments for new materials\u003c\/li\u003e\n            \u003cli\u003eRecognizing common cut issues, alarms, and basic troubleshooting steps\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Structured procedures and standardized recipes help ensure consistent results across multiple operators and shifts.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 8 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What routine maintenance does a 6 kW 6×20 system require?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Routine maintenance is essential to maintaining cut quality and uptime. Typical tasks include:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eInspecting and replacing cutting nozzles and protective windows\u003c\/li\u003e\n            \u003cli\u003eChecking assist gas filters, regulators, and hoses for contamination or leaks\u003c\/li\u003e\n            \u003cli\u003eMonitoring chiller operation, fluid condition, and alarm history\u003c\/li\u003e\n            \u003cli\u003eCleaning the cutting table, removing slag, and inspecting motion components and cable carriers\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We supply recommended intervals and checklists, and training covers how to perform these tasks safely and consistently.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 9 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How does the Class 1 enclosure influence our safety and PPE policies?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            The Class 1 enclosure is designed to keep the beam and process light contained during normal operation.\n            Typically this means:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eLaser eyewear is primarily required for certain maintenance or service work, not day-to-day operation\u003c\/li\u003e\n            \u003cli\u003eOperator training emphasizes interlock checks, safe loading, and lockout\/tagout procedures\u003c\/li\u003e\n            \u003cli\u003eThe cell can often be installed in shared bays, subject to your internal EHS policies\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We can provide documentation and example procedures to support your internal safety reviews and training.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 10 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Can the 6 kW 6×20 cell integrate with our existing CAD\/ERP\/MES workflow?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Yes. A typical integration pattern is:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eGeometry and revisions managed in your CAD and PLM systems\u003c\/li\u003e\n            \u003cli\u003eFlat patterns exported as DXF\/STEP with naming aligned to part\/assembly IDs and revisions\u003c\/li\u003e\n            \u003cli\u003eCypCut imports these files for nesting, parameter assignment, and simulation\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We help define folder structures, naming conventions, and job-release steps so the laser cell fits smoothly\n            into your planning, scheduling, and reporting processes.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 11 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How do we decide if a 6 kW 6×20 configuration is the right fit for our shop?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            The decision should be based on \u003cstrong\u003epart mix, thickness distribution, bottlenecks, and growth plans\u003c\/strong\u003e.\n            In an evaluation, we typically review:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eCurrent and projected thickness ranges and material types\u003c\/li\u003e\n            \u003cli\u003eDistribution of part sizes, especially long and large-format components\u003c\/li\u003e\n            \u003cli\u003eWhere cutting currently constrains throughput (e.g., plasma capacity, existing lasers)\u003c\/li\u003e\n            \u003cli\u003eRequired edge quality, tolerances, and downstream processes (welding, painting, machining)\u003c\/li\u003e\n            \u003cli\u003eROI models comparing 6 kW 6×20 with alternatives like 3 kW 6×20, 6×12, or 12 kW systems\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Using your sample parts and production data, we can recommend whether a 6 kW 6×20 cell should serve as your\n            primary long-format asset or as part of a multi-machine strategy.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n    \u003c\/div\u003e\n\n    \u003cp class=\"umpro-product-faq__closing\"\u003e\n      \u003cstrong\u003eStill evaluating a 6 kW 6×20 long-format platform?\u003c\/strong\u003e\n      Share representative part files and your material\/thickness mix. We’ll prepare a targeted assessment and\n      configuration recommendation for your 6 kW 6×20 enclosed fiber laser cell, including expected cycle times, nesting\n      approaches, and integration options for your fabrication workflow.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e\n","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966016057710,"sku":"UFL-6x20-6KW-ENC","price":239900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-12kw-enclosed-fiber-laser-cutter-6x20ft-fscut-5723155.png?v=1772248807"},{"product_id":"umprotech-enclosed-fiber-laser-12kw-6x20ft","title":"Umprotech 12kW Enclosed Fiber Laser Cutter 6x20ft FSCUT","description":"\u003csection class=\"umpro-product umpro-product--flagship\"\u003e\n  \u003c!-- HERO \/ OVERVIEW --\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003cp class=\"umpro-product__eyebrow\"\u003eEnclosed Fiber Laser Cutting Cell · Ultra Long-Format 6×20 Platform\u003c\/p\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003e\n      Umprotech Enclosed Fiber Laser Cutter – 12 kW · 6×20 ft · FSCUT \/ CypCut\n    \u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003e\n      A fully enclosed, \u003cstrong\u003eultra high-power 12 kW fiber laser cutting system\u003c\/strong\u003e on an\n      \u003cstrong\u003eextra-long 6×20 ft (72×240″) bed\u003c\/strong\u003e, built for US job shops, OEMs, and fabrication cells that\n      process \u003cstrong\u003eoversized sheets and long profiles\u003c\/strong\u003e. Combining a 12 kW Raycus or IPG fiber source with\n      FSCUT industrial motion control and CypCut CAM\/nesting, this platform is engineered for\n      \u003cstrong\u003emaximum throughput, safety, and repeatable edge quality\u003c\/strong\u003e on stainless, carbon steel, aluminum,\n      and brass.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__hero-grid\"\u003e\n      \u003cp class=\"umpro-product__hero-line\"\u003e\n        \u003cstrong\u003eLaser power:\u003c\/strong\u003e 12 kW fiber (Raycus \/ IPG) ·\n        \u003cstrong\u003eBed size:\u003c\/strong\u003e 6×20 ft (72×240″) ·\n        \u003cstrong\u003eController:\u003c\/strong\u003e FSCUT with CypCut CAM \/ nesting\n      \u003c\/p\u003e\n      \u003cp class=\"umpro-product__hero-line\"\u003e\n        \u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 ·\n        \u003cstrong\u003eHead:\u003c\/strong\u003e Auto-focus fiber cutting head ·\n        \u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e \/ O\u003csub\u003e2\u003c\/sub\u003e \/ air (configuration dependent)\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cul class=\"umpro-product__hero-points\"\u003e\n      \u003cli\u003e12 kW fiber power for aggressive cutting of thin sheet and heavy plate\u003c\/li\u003e\n      \u003cli\u003eExtra-long 6×20 ft format for oversized panels, long parts, and ultra-high-yield nesting\u003c\/li\u003e\n      \u003cli\u003eClass 1 fully enclosed cabinet with integrated fume extraction and industrial chiller\u003c\/li\u003e\n      \u003cli\u003eFSCUT + CypCut control stack for intelligent nesting, simulation, and diagnostics\u003c\/li\u003e\n      \u003cli\u003eBuilt for multi-shift, high-duty environments where laser throughput drives plant output\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/header\u003e\n\n  \u003c!-- POSITIONING \/ VALUE FOR US BUYERS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 12 kW 6×20 ft enclosed fiber laser is positioned as an\n      \u003cstrong\u003eultra long-format flagship cutting cell\u003c\/strong\u003e for shops where both\n      \u003cstrong\u003epower\u003c\/strong\u003e and \u003cstrong\u003epart length\u003c\/strong\u003e matter. It is intended for operations that cut\n      \u003cstrong\u003elarge panels, frames, and architectural elements\u003c\/strong\u003e or want to drive maximum yield from 6×20\n      blanks, while maintaining tight control over safety and process stability.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003e12 kW fiber laser (Raycus \/ IPG):\u003c\/strong\u003e provides the energy needed for very high linear speeds on\n        thin and mid-gauge sheets and extends into demanding plate applications for carbon steel, stainless, and\n        aluminum. Compared to mid-power systems, 12 kW sharply reduces pierce time and total cycle time on many\n        thicknesses.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eExtra-long 6×20 ft (72×240″) bed:\u003c\/strong\u003e supports oversized panels, long chassis rails, and\n        architectural elements in a single setup. The extended nesting area also enables \u003cstrong\u003eexceptionally\n        high part density\u003c\/strong\u003e and kit-based nests on long blanks, reducing scrap and material handling.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFull-cover, Class 1 enclosure:\u003c\/strong\u003e a light-tight, interlocked housing with viewing windows and\n        internal lighting. Helps contain process light and much of the fume load, simplifying laser zoning and safety\n        planning in busy bays with press brakes, weld cells, and assembly stations.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAuto-focus cutting head:\u003c\/strong\u003e automatically adapts focus to material thickness and moderate sheet\n        warp over the entire 6×20 ft working envelope. Supports consistent kerf and edge quality on long parts and\n        mixed nests, limiting rework and manual grinding.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFSCUT controller with CypCut CAM:\u003c\/strong\u003e an industrial-grade control stack widely used in flat-sheet\n        laser applications. Offers intelligent nesting, micro-joints, common-line strategies, and simulation for\n        \u003cstrong\u003ereduced scrap and predictable cycle times\u003c\/strong\u003e—even on large nests and long profiles.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIntegrated fume extraction \u0026amp; industrial chiller:\u003c\/strong\u003e shipped as part of the system, not as a\n        separate project. Stable cooling and reliable extraction are essential to running 12 kW productively across\n        long shifts on large-format sheets.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOptimized for mixed alloys \u0026amp; part mixes:\u003c\/strong\u003e supports cutting of carbon steel, stainless,\n        aluminum, and brass within defined thickness ranges. Assist gas strategies can be tuned for weld-ready edges,\n        architectural finishes, or cost-focused cutting.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eDesigned for integration:\u003c\/strong\u003e intended as the core cutting asset in cells feeding press brakes,\n        panel benders, machining centers, robotic welders, and assembly lines, where laser throughput governs\n        the pace of the entire process.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- PERFORMANCE OVERVIEW --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--performance\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003ePerformance: 12 kW power · 6×20 ft long-format capability\u003c\/h3\u003e\n    \u003cp\u003e\n      A \u003cstrong\u003e12 kW fiber source\u003c\/strong\u003e on a \u003cstrong\u003e6×20 ft platform\u003c\/strong\u003e is targeted at plants and job shops\n      that need to cut \u003cstrong\u003elong parts, oversize panels, or multiple part kits\u003c\/strong\u003e on each sheet—and where\n      reducing cycle time on those nests directly frees capacity downstream. It combines the throughput of 12 kW with\n      the flexibility of an extra-long working envelope.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__metrics-grid\"\u003e\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eTypical material coverage*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eCarbon\/mild steel: thin sheet through thick plate jobs (application and gas dependent)\u003c\/li\u003e\n          \u003cli\u003eStainless steel: thin, mid-gauge, and heavy sections for food, pharma, and architectural fabrications\u003c\/li\u003e\n          \u003cli\u003eAluminum: panels and plate for enclosures, chassis, structural members, and transport components\u003c\/li\u003e\n          \u003cli\u003eBrass \u0026amp; copper alloys: selected thickness ranges with tuned parameters and safety considerations\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *Actual thickness capability and speed depend on alloy, assist gas, nozzle, and required edge quality.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eThroughput characteristics*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eVery high linear cutting speeds on thin and mid-gauge sheet with nitrogen or air\u003c\/li\u003e\n          \u003cli\u003eShort pierce times and strong cut-through behavior on thick materials\u003c\/li\u003e\n          \u003cli\u003eHigh part count per sheet thanks to 6×20 ft nesting area and 12 kW cut speeds\u003c\/li\u003e\n          \u003cli\u003ePotential to consolidate work from multiple smaller lasers into a single high-power long-format cell\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *Best evaluated with your actual nests and materials; we can estimate cycle times based on sample parts.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__metric\"\u003e\n        \u003cp class=\"umpro-product__metric-label\"\u003eQuality \u0026amp; repeatability*\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eWeld-ready edges achievable on many materials with tuned parameters and gas strategies\u003c\/li\u003e\n          \u003cli\u003eConsistent feature geometry and edge appearance across the full 6×20 ft working area\u003c\/li\u003e\n          \u003cli\u003eRepeatable results across shifts using standardized FSCUT\/CypCut parameter libraries\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"umpro-product__metric-note\"\u003e\n          *Critical dimensions and finishes should be validated on your materials and fixturing as part of qualification.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- DETAILED TECHNICAL SPECIFICATIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 12 kW 6×20 enclosed fiber laser is delivered as a \u003cstrong\u003ecomplete large-format cutting cell\u003c\/strong\u003e.\n      The fiber source, motion platform, auto-focus head, control hardware and software, full enclosure, extraction,\n      and chiller are engineered to operate as an integrated system once utilities are installed to specification.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003c!-- LASER SOURCE --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eLaser power \u0026amp; source\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 12 kW fiber (Raycus or IPG)\u003c\/p\u003e\n        \u003cp\u003e\n          12 kW is an \u003cstrong\u003eultra high-power configuration\u003c\/strong\u003e intended for shops that:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eRoutinely cut thick plate or heavy sections, not just occasional jobs\u003c\/li\u003e\n          \u003cli\u003eRun high utilization on their laser assets and are capacity-constrained at the cutting step\u003c\/li\u003e\n          \u003cli\u003eWant to shorten cycle times on large nests and long parts to free downstream capacity\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Raycus and IPG are established providers of industrial fiber sources, offering stable power output and\n          service support suited to multi-shift production environments.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- WORKING ENVELOPE --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eWorking envelope\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eBed size \/ stroke:\u003c\/strong\u003e 6×20 ft (72×240″) nominal working area\u003c\/p\u003e\n        \u003cp\u003e\n          A 6×20 format is ideal when you:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eProduce long chassis rails, architectural panels, or structural members\u003c\/li\u003e\n          \u003cli\u003eNeed to nest entire assemblies or large kits on a single long sheet\u003c\/li\u003e\n          \u003cli\u003eWant to minimize repositioning and seam welds on oversized parts\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Remnant sheets can be saved as custom sizes in CypCut so remaining material from 6×20 blanks can be reused\n          across future jobs, improving yield.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CONTROLLER \/ CAM --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eController \u0026amp; CAM \/ nesting\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eControl:\u003c\/strong\u003e FSCUT industrial motion \u0026amp; laser controller\u003c\/p\u003e\n        \u003cp\u003e\u003cstrong\u003eSoftware:\u003c\/strong\u003e CypCut CAM \/ nesting\u003c\/p\u003e\n        \u003cp\u003e\n          FSCUT + CypCut provide a tightly integrated environment for programming and running large, complex nests:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eDXF\/STEP import and part library management for recurring work\u003c\/li\u003e\n          \u003cli\u003eAutomatic and manual nesting on full 6×20 sheets and defined remnants\u003c\/li\u003e\n          \u003cli\u003eAdvanced lead-in\/out strategies, micro-joints, corner smoothing, and cut sequencing\u003c\/li\u003e\n          \u003cli\u003eCommon-line and bridge cutting to reduce pierce count and cycle time\u003c\/li\u003e\n          \u003cli\u003eVisualization and simulation of toolpaths prior to launching production\u003c\/li\u003e\n          \u003cli\u003eDiagnostics tied to alarms, I\/O, and status indicators for troubleshooting\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Since FSCUT\/CypCut are widely used on flat-sheet lasers, many operators and programmers are already familiar\n          with the interface and concepts, shortening onboarding time.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CUTTING HEAD --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eCutting head \u0026amp; auto-focus\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Auto-focus fiber cutting head with capacitive height sensing\u003c\/p\u003e\n        \u003cp\u003e\n          On a 12 kW long-format machine, the cutting head must maintain stability across both \u003cstrong\u003ehigh power\u003c\/strong\u003e\n          and \u003cstrong\u003elong travel distances\u003c\/strong\u003e. The auto-focus design:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eAdjusts focus for each material\/thickness combination without manual intervention\u003c\/li\u003e\n          \u003cli\u003eMaintains consistent standoff distance over long runs, even when sheets have moderate warp\u003c\/li\u003e\n          \u003cli\u003eSupports mixed nests that combine multiple thicknesses and alloys on one 6×20 sheet\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          CypCut parameter libraries link focus position, gas pressure, and cutting speed to each recipe for repeatable\n          performance across shifts and operators.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ENCLOSURE \/ SAFETY --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eEnclosure \u0026amp; safety\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Full-cover, Class 1 light-tight cabinet with interlocks\u003c\/p\u003e\n        \u003cp\u003e\n          The enclosure is engineered for both safety and practicality on a 6×20 platform:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eInterlocked access doors that stop cutting if opened or not fully latched\u003c\/li\u003e\n          \u003cli\u003eViewing windows for monitoring pierce, cut quality, and process stability\u003c\/li\u003e\n          \u003cli\u003eInterior lighting and designed access points to support loading, cleaning, and inspection\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          The Class 1 design helps confine laser hazards to the cabinet during normal operation, simplifying PPE and\n          safety policies around the machine.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- UTILITIES \/ CHILLER \/ EXTRACTION --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eUtilities, chiller \u0026amp; fume extraction\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e industrial chiller and integrated fume extraction system\u003c\/p\u003e\n        \u003cp\u003e\n          Stable cooling and fume handling are essential when running 12 kW on large sheets:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eChiller circuits maintain laser and optics within specified temperature ranges\u003c\/li\u003e\n          \u003cli\u003eExtraction hoods capture fumes at the cutting zone and route them to plant exhaust\/filtration\u003c\/li\u003e\n          \u003cli\u003eConsistent thermal and air conditions support predictable cut quality and component life\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ASSIST GASES --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eAssist gases \u0026amp; process strategy\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eAssist gases:\u003c\/strong\u003e N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, and air (configuration dependent)\u003c\/p\u003e\n        \u003cp\u003e\n          On a 12 kW long-format machine, gas strategy significantly impacts both quality and cost per part:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003e\n            \u003cstrong\u003eOxygen:\u003c\/strong\u003e fast cutting of mild steel with oxide edges; often used for thick plate and where\n            throughput is the primary objective.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            \u003cstrong\u003eNitrogen:\u003c\/strong\u003e oxide-free edges for stainless, aluminum, and mild steel where welding,\n            painting, or cosmetic finish is critical.\n          \u003c\/li\u003e\n          \u003cli\u003e\n            \u003cstrong\u003eDry air:\u003c\/strong\u003e cost-focused option on certain materials where a light oxide tint is acceptable,\n            with parameters tuned for 12 kW conditions.\n          \u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          We can help estimate gas consumption, size supply infrastructure, and define parameter sets aligned with\n          your thickness mix and duty cycle.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- MOTION SYSTEM --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eMotion system \u0026amp; structure\u003c\/h4\u003e\n        \u003cp\u003e\u003cstrong\u003eMotion:\u003c\/strong\u003e servo-driven gantry with precision linear guidance\u003c\/p\u003e\n        \u003cp\u003e\n          The motion platform is optimized for both \u003cstrong\u003elength\u003c\/strong\u003e and \u003cstrong\u003espeed\u003c\/strong\u003e:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eSmooth acceleration and interpolation along the full 20 ft travel\u003c\/li\u003e\n          \u003cli\u003eConsistent geometry on long parts and features distributed across the entire sheet\u003c\/li\u003e\n          \u003cli\u003eRobust construction suitable for continuous operation in production environments\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- ELECTRICAL \/ FOOTPRINT --\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003ch4 class=\"umpro-product__spec-title\"\u003eElectrical \u0026amp; footprint (high level)\u003c\/h4\u003e\n        \u003cp\u003e\n          Detailed electrical and layout documentation is provided in the proposal and planning process. At a high level,\n          the system is intended for:\n        \u003c\/p\u003e\n        \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n          \u003cli\u003eUS industrial 3-phase power sized for a 12 kW laser, chiller, and motion\/control loads\u003c\/li\u003e\n          \u003cli\u003eInstallation in fabrication bays with adequate length and clearances for 6×20 sheet handling\u003c\/li\u003e\n          \u003cli\u003eRigging paths appropriate for moving a long-format enclosed laser into position\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003e\n          Pre-install planning focuses on power, access, floor space, and sheet-handling strategy so commissioning can\n          center on parts, parameters, and workflows.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cp class=\"umpro-product__note\"\u003e\n      \u003cem\u003e\n        Real-world cutting capacity, tolerances, and throughput depend on alloy, assist gas, nozzle selection, nesting\n        strategy, and edge-quality requirements. For critical work, we recommend qualification runs on your material\n        and parts before finalizing production KPIs and quoting strategies.\n      \u003c\/em\u003e\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- APPLICATIONS \/ USE CASES --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003e\n      The 12 kW, 6×20 ft Umprotech enclosed fiber laser is typically deployed as a\n      \u003cstrong\u003ehigh-power, long-format production cell\u003c\/strong\u003e for plants and job shops that work with large panels,\n      long profiles, and kit-based nests. It can operate as a standalone laser cell or as the cutting front-end for an\n      integrated workflow with press brakes, panel benders, saws, machining centers, and robotic welding.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"umpro-product__usecases-grid\"\u003e\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eOversized panels \u0026amp; architectural elements\u003c\/h4\u003e\n        \u003cp\u003e\n          Cutting long architectural screens, cladding, soffits, and decorative panels from full-length sheets,\n          minimizing seams and splices while keeping edge quality suitable for visible installations.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eMachine bases, frames \u0026amp; chassis rails\u003c\/h4\u003e\n        \u003cp\u003e\n          Producing long machine base plates, side frames, and chassis rails for machinery, vehicles, and material\n          handling equipment in a single setup, reducing alignment and welding operations.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eLarge cabinets, enclosures \u0026amp; kiosks\u003c\/h4\u003e\n        \u003cp\u003e\n          Cutting long cabinet sides, doors, and back panels for electrical enclosures, kiosks, and control cabinets,\n          with accurately located bend lines and features for downstream forming and assembly.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eStructural sheet \u0026amp; plate components\u003c\/h4\u003e\n        \u003cp\u003e\n          High-speed production of stiffeners, gussets, mounting plates, and structural profiles in steel,\n          stainless, and aluminum, with 12 kW power offering aggressive cycle times on thicker sections.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eOEM kit-based production on long blanks\u003c\/h4\u003e\n        \u003cp\u003e\n          Kit-based nesting on 6×20 sheets, combining large panels and many small brackets or hardware plates in one\n          nest. Supports OEM and contract manufacturing where complete assemblies are kitted from each sheet.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eHVAC, ducting \u0026amp; building systems\u003c\/h4\u003e\n        \u003cp\u003e\n          Cutting extended duct sections, plenums, rails, and structural supports, leveraging 6×20 sheet formats and\n          12 kW speeds to reduce unit cost while meeting dimensional requirements.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eHigh-mix \/ high-throughput job-shop work\u003c\/h4\u003e\n        \u003cp\u003e\n          Job shops and contract manufacturers processing a mix of long and short parts, where a 6×20 format gives\n          nesting flexibility and 12 kW power ensures shorts and long profiles are cut quickly.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"umpro-product__usecase\"\u003e\n        \u003ch4\u003eIntegration into automated towers \u0026amp; cells\u003c\/h4\u003e\n        \u003cp\u003e\n          Acting as the cutting core in an automated material tower or long-format load\/unload system, feeding\n          press brakes and robotic weld cells where laser throughput strongly influences overall OEE.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cp\u003e\n      In many plants, the 12 kW 6×20 cell becomes the \u003cstrong\u003eprimary long-format production asset\u003c\/strong\u003e, with\n      smaller-bed lasers handling short parts, prototypes, and small-batch specialty work.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- CONFIGURATIONS \u0026 OPTIONS --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003e\n      The Umprotech 12 kW 6×20 enclosed fiber laser is provided as a \u003cstrong\u003eready-to-run ultra long-format\n      cutting platform\u003c\/strong\u003e. All core systems—12 kW fiber source, auto-focus head, FSCUT control, full enclosure,\n      extraction, and chiller—are included. Configuration options allow alignment with your material mix, gas\n      strategy, and internal standards.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eFiber source options:\u003c\/strong\u003e 12 kW Raycus or 12 kW IPG, selected according to your preferred\n        supplier network, internal standards, and service strategy.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAssist gas configuration:\u003c\/strong\u003e support for N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, and air\n        (configuration dependent), with guidance on sizing tanks, lines, and regulators for 12 kW utilization.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eControl stack:\u003c\/strong\u003e FSCUT controller with CypCut CAM\/nesting as standard—no separate core CAM\n        purchase required for flat-sheet programming and simulation.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eCutting head:\u003c\/strong\u003e auto-focus head included in all configurations, with parameter libraries\n        organized by material and thickness for operational simplicity.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eEnclosure \u0026amp; extraction:\u003c\/strong\u003e full-cover Class 1 enclosure and integrated fume extraction\n        supplied as standard, minimizing additional engineering around guarding and air handling.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eIndustrial chiller:\u003c\/strong\u003e included and sized for 12 kW multi-shift operation, maintaining thermal\n        stability for the laser source and optics.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eElectrical \u0026amp; utility options:\u003c\/strong\u003e available in configurations compatible with common US\n        industrial voltages; details confirmed during the application review and quoting phase.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAutomation \u0026amp; integration support:\u003c\/strong\u003e guidance for tying into long-format load\/unload\n        systems, towers, conveyors, and robotic cells as your automation roadmap evolves.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp\u003e\n      For specialized requirements—unique alloys, internal OEM specifications, or defined cell concepts—we work with\n      your engineering and operations teams to recommend a 12 kW 6×20 configuration and workflow aligned with your\n      production targets.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- IMPLEMENTATION \u0026 SUPPORT --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003e\n      Deploying a \u003cstrong\u003e12 kW 6×20 ft fiber laser\u003c\/strong\u003e is a strategic decision for any operation. We support US\n      job shops, OEMs, and integrators from early evaluation through commissioning and ramp-up, focusing on\n      \u003cstrong\u003ereal parts, realistic cycle times, and robust processes\u003c\/strong\u003e instead of just nameplate specifications.\n    \u003c\/p\u003e\n\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePre-installation planning:\u003c\/strong\u003e detailed review of power, grounding, gas supply\n        (N\u003csub\u003e2\u003c\/sub\u003e\/O\u003csub\u003e2\u003c\/sub\u003e\/air), exhaust routing, floor layout, rigging paths, and 6×20 sheet handling\n        so site preparation is clear and predictable.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003ePart \u0026amp; material review:\u003c\/strong\u003e evaluation of representative parts, alloys, thickness ranges,\n        and volume to confirm that a 12 kW 6×20 cell matches your workload and growth projections.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eCypCut workflow configuration:\u003c\/strong\u003e help defining nesting rules, naming conventions, remnant\n        strategies, and parameter libraries tuned to your material mix and quality expectations.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOperator \u0026amp; maintenance training:\u003c\/strong\u003e training on safe operation of a 12 kW enclosed system,\n        startup\/shutdown procedures, alarm interpretation, quality checks, and routine maintenance (nozzles, protective\n        glass, filters, cleaning routines).\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eOngoing process support:\u003c\/strong\u003e assistance with new materials, cut-quality enhancements, cycle-time\n        improvements, and integration questions as you move more work onto the 6×20 platform.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp class=\"umpro-product__cta\"\u003e\n      \u003cstrong\u003eNext step:\u003c\/strong\u003e send representative part files (DXF\/STEP\/PDF) and a summary of your material and\n      thickness mix. We’ll review fit, estimate cycle times, and recommend a 12 kW 6×20 configuration and assist-gas\n      strategy aligned with your production and ROI goals.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- TECHNICAL FAQ --\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--faq umpro-product-faq\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eTechnical FAQ – 12 kW · 6×20 ft enclosed fiber laser\u003c\/h3\u003e\n\n    \u003cdiv class=\"umpro-product-faq__grid\"\u003e\n      \u003c!-- FAQ 1 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          When does a 12 kW 6×20 platform make more sense than a 6×12 or smaller bed?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            A 12 kW 6×20 platform is most compelling when you:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eRegularly cut long parts, large panels, or architectural elements that exceed 12 ft\u003c\/li\u003e\n            \u003cli\u003eWant to nest entire assemblies or multiple large components on a single long blank\u003c\/li\u003e\n            \u003cli\u003eAre constrained by material handling or repositioning on shorter beds\u003c\/li\u003e\n            \u003cli\u003eNeed maximum utilization of 6×20 material coming from upstream processes or suppliers\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            If your parts fit comfortably in 6×12 or smaller formats, a shorter bed may suffice. For true long-format\n            work and maximum nesting flexibility, 6×20 provides clear advantages.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 2 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What thickness range is realistic on a 12 kW 6×20 system?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            12 kW is designed to cover \u003cstrong\u003ethin sheet through demanding plate applications\u003c\/strong\u003e in carbon\n            steel, stainless, and aluminum. Practical ranges depend on:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eMaterial and grade (mild vs high-strength steels, stainless types, aluminum series)\u003c\/li\u003e\n            \u003cli\u003eAssist gas (N\u003csub\u003e2\u003c\/sub\u003e, O\u003csub\u003e2\u003c\/sub\u003e, air) along with available pressure and flow\u003c\/li\u003e\n            \u003cli\u003eEdge-quality expectations (cosmetic vs weld-ready vs to-be-machined)\u003c\/li\u003e\n            \u003cli\u003eRequired cycle times and utilization targets\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We recommend validating your key thickness ranges with sample cutting and tuned parameters before\n            finalizing published internal thickness and speed guidelines.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 3 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How does 12 kW power affect assist gas usage and total cost per part?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            At 12 kW, assist gas flow and pressure requirements can increase compared to lower-power systems, especially\n            on thick or high-speed jobs. However:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eCut time per part typically drops significantly due to higher speed and faster pierces\u003c\/li\u003e\n            \u003cli\u003eGas consumption per minute may rise, but gas per part may fall depending on the part geometry\u003c\/li\u003e\n            \u003cli\u003eBulk gas or advanced compressed air systems become more attractive as utilization grows\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We can help model gas cost per part based on your part mix, duty cycle, and planned assist gas strategy.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 4 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Does the 6×20 length create accuracy issues at the far end of the bed?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            The motion system is designed to maintain accuracy and repeatability over the full 6×20 envelope using\n            servo drives and precision linear guidance. In practice:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eProper installation and leveling are critical to long-format accuracy\u003c\/li\u003e\n            \u003cli\u003ePeriodic maintenance and calibration help maintain performance over time\u003c\/li\u003e\n            \u003cli\u003eParameter tuning for long toolpaths ensures consistent cut behavior across the sheet\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            During commissioning, we verify performance at multiple locations on the table using representative parts\n            and test patterns.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 5 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How does CypCut handle nesting and remnant management on 6×20 sheets?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            CypCut provides robust tools for long-format sheet strategies, including:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eAutomatic and interactive nesting on full 6×20 blanks with priority rules\u003c\/li\u003e\n            \u003cli\u003eCreation and reuse of remnant sheet definitions from partially used long sheets\u003c\/li\u003e\n            \u003cli\u003eCommon-line and skeleton reduction strategies to minimize scrap and cutting time\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We help define nesting workflows, naming conventions, and remnant policies so you can consistently capture\n            yield from long-format material.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 6 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What additional facility requirements should we expect for a 6×20 machine?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Beyond typical 12 kW infrastructure needs, a 6×20 platform also requires attention to layout and handling:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eFloor space and access clearances sufficient for 20 ft bed length and operator movement\u003c\/li\u003e\n            \u003cli\u003eRigging paths sized for moving a long-format enclosed machine into position\u003c\/li\u003e\n            \u003cli\u003eSheet-handling equipment (cranes, vacuum lifters, carts) configured for 6×20 blanks\u003c\/li\u003e\n            \u003cli\u003eAppropriate staging areas for raw material and finished parts around the cell\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            These considerations are reviewed during pre-install planning with your operations and facilities teams.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 7 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How complex is operator training on a 12 kW 6×20 FSCUT + CypCut system?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Operators with prior CNC or laser experience typically adapt quickly, but both \u003cstrong\u003ehigh power\u003c\/strong\u003e\n            and \u003cstrong\u003elong-format handling\u003c\/strong\u003e increase the importance of clear procedures. Training emphasizes:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eSafe operation of a 12 kW Class 1 system and understanding interlocks and emergency functions\u003c\/li\u003e\n            \u003cli\u003eLoading and aligning 6×20 sheets safely and consistently\u003c\/li\u003e\n            \u003cli\u003eNest loading, parameter selection, and controlled adjustments\u003c\/li\u003e\n            \u003cli\u003eRecognition of cut-quality issues and basic troubleshooting steps\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Well-structured parameter libraries, visual nests, and loading procedures help maintain consistency across\n            shifts and operators.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 8 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          What does routine maintenance look like on a 12 kW long-format system?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Routine maintenance is essential for both quality and long-term reliability. Typical recurring tasks include:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eInspecting and cleaning\/replacing nozzles and protective windows at defined intervals\u003c\/li\u003e\n            \u003cli\u003eChecking assist gas filters, lines, and regulators for contamination and leaks\u003c\/li\u003e\n            \u003cli\u003eMonitoring chiller performance, fluid level, and alarm history\u003c\/li\u003e\n            \u003cli\u003eCleaning the cutting area, removing slag, and inspecting motion components and cable carriers\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We supply maintenance schedules and checklists, and training covers how to perform these tasks safely and\n            consistently in a production environment.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 9 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How does the Class 1 enclosure affect our safety program and PPE requirements?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            The Class 1 enclosure is designed to contain the beam and process light under normal operation. As a result:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eLaser-specific PPE (e.g., eyewear) is typically focused on maintenance and service operations\u003c\/li\u003e\n            \u003cli\u003eMost daily operation is managed through interlocks, procedures, and lockout\/tagout practices\u003c\/li\u003e\n            \u003cli\u003eThe laser cell can often be placed in shared bays with bending and welding, subject to company policies\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We can support your safety and EHS teams with documentation and best practices tailored to a 12 kW Class 1\n            installation.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 10 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          Can the 6×20 12 kW cell integrate with our existing CAD\/ERP\/MES workflow?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            Yes. A common integration approach is:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eEngineering maintains geometry and revisions in your CAD and PLM systems\u003c\/li\u003e\n            \u003cli\u003eFlat patterns exported as DXF\/STEP with part numbers and revisions aligned to ERP\/MES\u003c\/li\u003e\n            \u003cli\u003eCypCut imports these files for nesting, parameter assignment, and simulation\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            We help define folder structures, naming conventions, and job-release steps so the 6×20 cell fits cleanly\n            into your existing planning and scheduling processes.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n\n      \u003c!-- FAQ 11 --\u003e\n      \u003carticle class=\"umpro-product-faq__item\"\u003e\n        \u003ch4 class=\"umpro-product-faq__question\"\u003e\n          How do we evaluate whether a 12 kW 6×20 system is the right investment for our plant?\n        \u003c\/h4\u003e\n        \u003cdiv class=\"umpro-product-faq__answer\"\u003e\n          \u003cp\u003e\n            The decision should be grounded in your \u003cstrong\u003eactual part mix, bottlenecks, and growth plans\u003c\/strong\u003e.\n            We typically analyze:\n          \u003c\/p\u003e\n          \u003cul class=\"umpro-product__list umpro-product__list--compact\"\u003e\n            \u003cli\u003eDistribution of part lengths, widths, and thicknesses across key product families\u003c\/li\u003e\n            \u003cli\u003eCurrent and projected laser utilization and where cutting constrains output\u003c\/li\u003e\n            \u003cli\u003eEdge-quality, tolerance, and cosmetic requirements on critical parts\u003c\/li\u003e\n            \u003cli\u003eROI scenarios comparing 12 kW 6×20 with alternatives (shorter beds, lower power, or multiple smaller machines)\u003c\/li\u003e\n          \u003c\/ul\u003e\n          \u003cp\u003e\n            Using your sample parts and production data, we can recommend whether a 12 kW 6×20 cell should be your\n            primary long-format cutting asset, part of a broader multi-laser strategy, or staged as a future\n            expansion step.\n          \u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/article\u003e\n    \u003c\/div\u003e\n\n    \u003cp class=\"umpro-product-faq__closing\"\u003e\n      \u003cstrong\u003eStill evaluating 12 kW on a 6×20 platform?\u003c\/strong\u003e\n      Share representative part files and your material\/thickness distribution. We’ll prepare a focused assessment and\n      configuration recommendation for your 12 kW 6×20 enclosed fiber laser cell, including expected cycle times, gas\n      strategy, and workflow integration options.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e\n","brand":"Umprotech","offers":[{"title":"Default Title","offer_id":52966016090478,"sku":"UFL-6x20-12KW-ENC","price":309900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/umprotech-12kw-enclosed-fiber-laser-cutter-6x20ft-fscut-5723155.png?v=1772248807"},{"product_id":"bspro-cnc-fiber-laser-system","title":"BsPRO CNC Fiber Laser System – 4'x4', 4'x8', 5'x10' Table Sizes","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eBsPRO CNC Fiber Laser System – 4'×4', 4'×8', 5'×10'\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003eThe BsPRO CNC Fiber Laser is a fully enclosed production laser system designed for US fabrication shops that demand speed, precision, and reliability. Built for job shops, OEMs, and industrial manufacturers, the BsPRO delivers professional-grade cutting for a wide range of sheet metal applications with robust support and American engineering behind every machine.\u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\n      \u003cstrong\u003eTable sizes:\u003c\/strong\u003e 4'×4', 4'×8', 5'×10' · \u003cstrong\u003eEnclosed design\u003c\/strong\u003e · \u003cstrong\u003eIndustrial motion platform\u003c\/strong\u003e\n    \u003c\/p\u003e\n  \u003c\/header\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003eAvailable in 4'×4', 4'×8', and 5'×10' table formats to fit common US sheet sizes and workflows\u003c\/li\u003e\n      \u003cli\u003eFully enclosed cutting area with integrated safety and fume extraction interfaces for safer shop operation\u003c\/li\u003e\n      \u003cli\u003eIndustrial-grade motion system delivers high-speed, repeatable cutting for production environments\u003c\/li\u003e\n      \u003cli\u003eSupports a range of upgrades including autofocus head, advanced chiller, and camera monitoring for enhanced productivity\u003c\/li\u003e\n      \u003cli\u003eAmerican engineered and supported—responsive technical assistance from a US-based team\u003c\/li\u003e\n      \u003cli\u003eFlexible configuration options to match your part mix, material flow, and shop floor requirements\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eTable sizes:\u003c\/strong\u003e 4'×4', 4'×8', 5'×10'\u003c\/p\u003e\n        \u003cp\u003eChoose the table format that matches your material handling and part size needs—from compact prototyping to full 5'×10' production sheets.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eFully enclosed system\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp\u003eDesigned for operator safety and clean shop environments with integrated fume extraction interfaces.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eIndustrial motion platform\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp\u003eEngineered for high-speed, accurate cutting and dependable uptime in demanding fabrication settings.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eUpgradable components\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp\u003eOptions include autofocus cutting head, upgraded chiller, camera monitoring, and gas\/chiller hookup kit.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eUS engineering \u0026amp; support\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp\u003eBacked by American technical assistance for installation, troubleshooting, and ongoing productivity.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003eThe BsPRO CNC Fiber Laser is ideal as a standalone laser cell or as part of a complete fabrication workflow, complementing press brakes, saws, and welding fixtures. Its enclosed design and flexible table sizes make it a fit for job shops handling diverse part runs and OEMs with repeat production.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eSheet metal parts: brackets, panels, enclosures, frames, gussets\u003c\/li\u003e\n      \u003cli\u003eIndustries: metal fabrication, contract manufacturing, machinery, HVAC, and general job shops\u003c\/li\u003e\n      \u003cli\u003eHigh-mix\/low-volume and repeat production jobs\u003c\/li\u003e\n      \u003cli\u003eIntegration with forming, bending, and welding operations\u003c\/li\u003e\n      \u003cli\u003eSafe, clean cutting for shops with environmental and safety requirements\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003eConfigure the BsPRO Fiber Laser to match your production needs and shop environment. Choose from multiple table sizes and a range of productivity and safety upgrades.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003eTable size options: 4'×4', 4'×8', 5'×10'\u003c\/li\u003e\n      \u003cli\u003eAutofocus cutting head for fast changeovers and varied material thickness\u003c\/li\u003e\n      \u003cli\u003eUpgraded chiller for enhanced thermal management\u003c\/li\u003e\n      \u003cli\u003eCamera and monitoring package for remote supervision and process visibility\u003c\/li\u003e\n      \u003cli\u003eGas and chiller hookup kit for streamlined installation\u003c\/li\u003e\n      \u003cli\u003eAdditional accessories to tailor the system to your workflow\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003eOur team supports you through every phase—from pre-install planning (power, floor space, safety, and access) to commissioning and operator training. We help review your parts, materials, and production goals to confirm the BsPRO is the right fit for your workflow.\u003c\/p\u003e\n    \u003cp\u003eWe regularly assist US job shops and OEMs in integrating fiber lasers with existing press brakes, saws, and welding cells. Our support covers basic programming, nesting strategies, and best practices for safe, efficient operation.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003ePre-installation checks and layout planning\u003c\/li\u003e\n      \u003cli\u003eApplication review to ensure fit for your materials and part mix\u003c\/li\u003e\n      \u003cli\u003eOperator training and process onboarding\u003c\/li\u003e\n      \u003cli\u003eOngoing technical assistance from US-based experts\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eNext step: Send us your sample parts or production requirements and we’ll recommend the ideal table size and configuration for your shop.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"UmproTech","offers":[{"title":"4' × 4'","offer_id":53001051242862,"sku":"BSPRO-44","price":19995.0,"currency_code":"USD","in_stock":true},{"title":"4' × 8'","offer_id":53001051275630,"sku":"BSPRO-48","price":24995.0,"currency_code":"USD","in_stock":true},{"title":"5' × 10'","offer_id":53001051308398,"sku":"BSPRO-510","price":29995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/bspro-cnc-fiber-laser-system-4x4-4x8-5x10-table-sizes-8305356.png?v=1772248208"},{"product_id":"anchu-lasercut-3015-enclosed-us","title":"ANCHU LaserCut 3015 Enclosed US – 6 kW 10'x5' Fiber Laser","description":"\u003csection class=\"umpro-product\"\u003e\n  \u003cheader class=\"umpro-product__hero\"\u003e\n    \u003ch2 class=\"umpro-product__title\"\u003eANCHU LaserCut 3015 Enclosed US – 6 kW 10'×5' Fiber Laser Cutting Machine\u003c\/h2\u003e\n    \u003cp class=\"umpro-product__subtitle\"\u003eA fully enclosed 6 kW fiber laser system with 3000 × 1500 mm (10' × 5') working area, engineered for North American sheet metal fabrication shops that demand productivity, safety, and flexibility for a wide range of materials and part sizes.\u003c\/p\u003e\n    \u003cp class=\"umpro-product__hero-line\"\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW · \u003cstrong\u003eWorking area:\u003c\/strong\u003e 3000 × 1500 mm (10' × 5') · \u003cstrong\u003ePower:\u003c\/strong\u003e 380–480 V 3-phase\u003c\/p\u003e\n  \u003c\/header\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--highlight\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey advantages for US buyers\u003c\/h3\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--highlights\"\u003e\n      \u003cli\u003e6 kW fiber laser source (IPG\/Raycus class) balances speed and cut quality for mild steel, stainless, and aluminum.\u003c\/li\u003e\n      \u003cli\u003e3000 × 1500 mm (10' × 5') working area fits standard North American sheet sizes and a wide range of part geometries.\u003c\/li\u003e\n      \u003cli\u003eFully enclosed cabin with safety interlocks and large viewing windows for operator protection and compliance.\u003c\/li\u003e\n      \u003cli\u003eDual shuttle (exchange) tables maximize throughput by enabling simultaneous cutting and part loading\/unloading.\u003c\/li\u003e\n      \u003cli\u003eHigh-precision rack \u0026amp; pinion X\/Y drives and ballscrew Z axis deliver repeatable accuracy for demanding jobs.\u003c\/li\u003e\n      \u003cli\u003eIntegrated nesting software and remote diagnostics streamline workflow and minimize downtime.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--specs\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eKey technical specifications\u003c\/h3\u003e\n    \u003cdiv class=\"umpro-product__specs-grid\"\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eLaser power:\u003c\/strong\u003e 6 kW fiber laser\u003c\/p\u003e\n        \u003cp\u003eDelivers fast, high-quality cutting for a range of metals and thicknesses, ideal for production of common gauges up to medium plate.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eWorking area:\u003c\/strong\u003e 3000 × 1500 mm (approx. 10' × 5')\u003c\/p\u003e\n        \u003cp\u003eHandles full-size sheets for efficient nesting and reduced handling, supporting large panels, frames, and batch work.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eTable system:\u003c\/strong\u003e Dual shuttle (exchange) tables\u003c\/p\u003e\n        \u003cp\u003eEnables continuous production—load and unload while cutting without interrupting the process.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eMachine design:\u003c\/strong\u003e Fully enclosed cabin with safety interlocks\u003c\/p\u003e\n        \u003cp\u003eProtects operators and maintains a clean, safe shop environment, meeting US safety expectations.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eMotion system:\u003c\/strong\u003e Rack \u0026amp; pinion X\/Y, ballscrew Z\u003c\/p\u003e\n        \u003cp\u003eEnsures precise, repeatable positioning for tight-tolerance parts.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003ePower requirements:\u003c\/strong\u003e 380–480 V, three-phase\u003c\/p\u003e\n        \u003cp\u003eCompatible with standard US industrial power; phase converters and transformers available if needed.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"umpro-product__spec-item\"\u003e\n        \u003cp\u003e\u003cstrong\u003eCutting head:\u003c\/strong\u003e Autofocus, supports oxygen, nitrogen, and compressed air\u003c\/p\u003e\n        \u003cp\u003eFlexible gas options for best results across different materials and thicknesses.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--applications\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eCapabilities \u0026amp; typical applications\u003c\/h3\u003e\n    \u003cp\u003eThis 3015 enclosed fiber laser is a production-ready solution for job shops, OEMs, and contract manufacturers needing a reliable, versatile cutting cell for a wide range of sheet metal parts.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list\"\u003e\n      \u003cli\u003eBrackets, panels, enclosures, cabinets, and structural frames\u003c\/li\u003e\n      \u003cli\u003eHVAC ductwork, machine covers, and chassis components\u003c\/li\u003e\n      \u003cli\u003eBatch production, prototypes, and high-mix\/low-volume runs\u003c\/li\u003e\n      \u003cli\u003eSupports mild steel, stainless steel, and aluminum in common gauges up to medium plate thickness\u003c\/li\u003e\n      \u003cli\u003eIdeal for integration with press brakes, welding cells, and downstream fabrication processes\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--options\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eConfigurations \u0026amp; options\u003c\/h3\u003e\n    \u003cp\u003eThe LaserCut 3015 Enclosed US is available in a standard configuration optimized for North American shops, with options to tailor power, integration, and utilities to your facility.\u003c\/p\u003e\n    \u003cul class=\"umpro-product__list umpro-product__list--options\"\u003e\n      \u003cli\u003e6 kW fiber laser source (IPG or Raycus class, per order)\u003c\/li\u003e\n      \u003cli\u003eFully enclosed cabin with safety interlocks and large viewing windows\u003c\/li\u003e\n      \u003cli\u003eDual shuttle tables for continuous operation\u003c\/li\u003e\n      \u003cli\u003eAutofocus cutting head with oxygen, nitrogen, and compressed air compatibility\u003c\/li\u003e\n      \u003cli\u003eIntegrated nesting software and remote support\u003c\/li\u003e\n      \u003cli\u003ePower configuration: 380–480 V three-phase; phase converters and transformers available for 240 V single-phase sites\u003c\/li\u003e\n      \u003cli\u003eCompatible with ANCHU AirCut US compressor packages and N₂ nitrogen generators for a complete gas solution\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"umpro-product__section umpro-product__section--support\"\u003e\n    \u003ch3 class=\"umpro-product__heading\"\u003eImplementation \u0026amp; support for US shops\u003c\/h3\u003e\n    \u003cp\u003eWe support your investment with freight shipping, installation assistance, and operator training for a smooth start-up. Our team helps review your parts, materials, and power requirements to ensure the LaserCut 3015 fits your workflow and facility.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003ePre-installation checks for power, floor space, and material flow\u003c\/li\u003e\n      \u003cli\u003eApplication review: confirm material types, thicknesses, and part mix\u003c\/li\u003e\n      \u003cli\u003eAssistance with nesting, cutting parameters, and basic program setup\u003c\/li\u003e\n      \u003cli\u003eRemote diagnostics and ongoing technical support via Ethernet\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eNext step: Send us sample parts or material specs and we’ll confirm fit, cycle time, and configuration for your shop.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e","brand":"ANCHU","offers":[{"title":"Default Title","offer_id":53015438819694,"sku":"LC-3015-6KW-US","price":159000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/anchu-lasercut-3015-enclosed-us-6-kw-10x5-fiber-laser-2260832.png?v=1772248206"},{"product_id":"flc-2424-1000-24in-x-24in-open-fiber-laser","title":"EtalTec FLC-2424-1000 – Compact In-House Metal Laser 24\" x 24\" 1000W","description":"\u003cp\u003e\u003cstrong\u003eEtalTec FLC-2424-1000 – Compact In-House Metal Laser 24\" x 24\" 1000W\u003c\/strong\u003e is part of the EtalTec \u003cstrong\u003eopen-type fiber laser line for sizes we had not covered earlier\u003c\/strong\u003e—from compact in-house systems to bigger full-sheet and long-bed industrial platforms.\u003c\/p\u003e\u003cp\u003eThis model is not presented as a generic size\/power template. It is positioned for the \u003cstrong\u003ein-house prototyping \/ small-part metal cutting\u003c\/strong\u003e buyer, where real U.S. demand depends on floor space, material size, power budget, and how much production has to move in-house.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking format:\u003c\/strong\u003e 24\" x 24\" open-type fiber laser cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower class:\u003c\/strong\u003e 1000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial positioning:\u003c\/strong\u003e Compact In-House Metal Laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e small internal parts, prototype brackets, signage samples, R\u0026amp;D and quick in-house metal cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption pack:\u003c\/strong\u003e auto-focus head, nesting software, gas console, fume extraction, dust collection, tube\/rotary consultation, installation planning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e active laser-cutting catalog line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequest a quote\u003c\/strong\u003e for source brand, gas package, software, thickness targets, shop footprint, freight, and installation scope.\u003c\/p\u003e","brand":"EtalTec","offers":[{"title":"Default Title","offer_id":53428887126382,"sku":"FLC-2424-1000","price":34900.0,"currency_code":"USD","in_stock":true}]},{"product_id":"fl34-1500-precision-3x4-open-fiber-laser","title":"EtalTec FL34-1500-PRECISION – Precision Shop 3x4 Fiber Laser 3x4 1500W","description":"\u003cp\u003e\u003cstrong\u003eEtalTec FL34-1500-PRECISION – Precision Shop 3x4 Fiber Laser 3x4 1500W\u003c\/strong\u003e is part of the EtalTec \u003cstrong\u003eopen-type fiber laser line for sizes we had not covered earlier\u003c\/strong\u003e—from compact in-house systems to bigger full-sheet and long-bed industrial platforms.\u003c\/p\u003e\u003cp\u003eThis model is not presented as a generic size\/power template. It is positioned for the \u003cstrong\u003ecompact premium shop laser \/ precision small-format production\u003c\/strong\u003e buyer, where real U.S. demand depends on floor space, material size, power budget, and how much production has to move in-house.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking format:\u003c\/strong\u003e 3x4 open-type fiber laser cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower class:\u003c\/strong\u003e 1500W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial positioning:\u003c\/strong\u003e Precision Shop 3x4 Fiber Laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e precision short-run parts, branded metal products, small shop fabrication, compact premium installs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption pack:\u003c\/strong\u003e auto-focus head, nesting software, gas console, fume extraction, dust collection, tube\/rotary consultation, installation planning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e active laser-cutting catalog line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequest a quote\u003c\/strong\u003e for source brand, gas package, software, thickness targets, shop footprint, freight, and installation scope.\u003c\/p\u003e","brand":"EtalTec","offers":[{"title":"Default Title","offer_id":53428887159150,"sku":"FL34-1500-PRECISION","price":74000.0,"currency_code":"USD","in_stock":true}]},{"product_id":"fl34-3000-highspeed-3x4-open-fiber-laser","title":"EtalTec FL34-3000-HIGHSPEED – HighSpeed 3x4 Fiber Laser 3x4 3000W","description":"\u003cp\u003e\u003cstrong\u003eEtalTec FL34-3000-HIGHSPEED – HighSpeed 3x4 Fiber Laser 3x4 3000W\u003c\/strong\u003e is part of the EtalTec \u003cstrong\u003eopen-type fiber laser line for sizes we had not covered earlier\u003c\/strong\u003e—from compact in-house systems to bigger full-sheet and long-bed industrial platforms.\u003c\/p\u003e\u003cp\u003eThis model is not presented as a generic size\/power template. It is positioned for the \u003cstrong\u003ecompact premium shop laser \/ precision small-format production\u003c\/strong\u003e buyer, where real U.S. demand depends on floor space, material size, power budget, and how much production has to move in-house.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking format:\u003c\/strong\u003e 3x4 open-type fiber laser cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower class:\u003c\/strong\u003e 3000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial positioning:\u003c\/strong\u003e HighSpeed 3x4 Fiber Laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e precision short-run parts, branded metal products, small shop fabrication, compact premium installs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption pack:\u003c\/strong\u003e auto-focus head, nesting software, gas console, fume extraction, dust collection, tube\/rotary consultation, installation planning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e active laser-cutting catalog line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequest a quote\u003c\/strong\u003e for source brand, gas package, software, thickness targets, shop footprint, freight, and installation scope.\u003c\/p\u003e","brand":"EtalTec","offers":[{"title":"Default Title","offer_id":53428887191918,"sku":"FL34-3000-HIGHSPEED","price":84900.0,"currency_code":"USD","in_stock":true}]},{"product_id":"fl510-1500-fullsheet-5x10-open-fiber-laser","title":"EtalTec FL510-1500-FULLSHEET – Full-Sheet Starter Fiber Laser 5x10 1500W","description":"\u003cp\u003e\u003cstrong\u003eEtalTec FL510-1500-FULLSHEET – Full-Sheet Starter Fiber Laser 5x10 1500W\u003c\/strong\u003e is part of the EtalTec \u003cstrong\u003eopen-type fiber laser line for sizes we had not covered earlier\u003c\/strong\u003e—from compact in-house systems to bigger full-sheet and long-bed industrial platforms.\u003c\/p\u003e\u003cp\u003eThis model is not presented as a generic size\/power template. It is positioned for the \u003cstrong\u003eentry full-sheet fabrication \/ startup growth\u003c\/strong\u003e buyer, where real U.S. demand depends on floor space, material size, power budget, and how much production has to move in-house.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking format:\u003c\/strong\u003e 5x10 open-type fiber laser cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower class:\u003c\/strong\u003e 1500W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial positioning:\u003c\/strong\u003e Full-Sheet Starter Fiber Laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e first full-sheet fiber laser for cabinets, signs, light contract fabrication and growth-stage shops\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption pack:\u003c\/strong\u003e auto-focus head, nesting software, gas console, fume extraction, dust collection, tube\/rotary consultation, installation planning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e active laser-cutting catalog line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequest a quote\u003c\/strong\u003e for source brand, gas package, software, thickness targets, shop footprint, freight, and installation scope.\u003c\/p\u003e","brand":"EtalTec","offers":[{"title":"Default Title","offer_id":53428887224686,"sku":"FL510-1500-FULLSHEET","price":46000.0,"currency_code":"USD","in_stock":true}]},{"product_id":"fl510-3000-workhorse-5x10-open-fiber-laser","title":"EtalTec FL510-3000-WORKHORSE – Full-Sheet Workhorse Fiber Laser 5x10 3000W","description":"\u003cp\u003e\u003cstrong\u003eEtalTec FL510-3000-WORKHORSE – Full-Sheet Workhorse Fiber Laser 5x10 3000W\u003c\/strong\u003e is part of the EtalTec \u003cstrong\u003eopen-type fiber laser line for sizes we had not covered earlier\u003c\/strong\u003e—from compact in-house systems to bigger full-sheet and long-bed industrial platforms.\u003c\/p\u003e\u003cp\u003eThis model is not presented as a generic size\/power template. It is positioned for the \u003cstrong\u003egeneral full-sheet job-shop production\u003c\/strong\u003e buyer, where real U.S. demand depends on floor space, material size, power budget, and how much production has to move in-house.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking format:\u003c\/strong\u003e 5x10 open-type fiber laser cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower class:\u003c\/strong\u003e 3000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial positioning:\u003c\/strong\u003e Full-Sheet Workhorse Fiber Laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e workhorse full-sheet cutting for enclosures, panels, cabinet parts and everyday sheet-metal demand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption pack:\u003c\/strong\u003e auto-focus head, nesting software, gas console, fume extraction, dust collection, tube\/rotary consultation, installation planning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e active laser-cutting catalog line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequest a quote\u003c\/strong\u003e for source brand, gas package, software, thickness targets, shop footprint, freight, and installation scope.\u003c\/p\u003e","brand":"EtalTec","offers":[{"title":"Default Title","offer_id":53428887257454,"sku":"FL510-3000-WORKHORSE","price":62000.0,"currency_code":"USD","in_stock":true}]},{"product_id":"fl510-6000-production-5x10-open-fiber-laser","title":"EtalTec FL510-6000-PRODUCTION – Full-Sheet Production Fiber Laser 5x10 6000W","description":"\u003cp\u003e\u003cstrong\u003eEtalTec FL510-6000-PRODUCTION – Full-Sheet Production Fiber Laser 5x10 6000W\u003c\/strong\u003e is part of the EtalTec \u003cstrong\u003eopen-type fiber laser line for sizes we had not covered earlier\u003c\/strong\u003e—from compact in-house systems to bigger full-sheet and long-bed industrial platforms.\u003c\/p\u003e\u003cp\u003eThis model is not presented as a generic size\/power template. It is positioned for the \u003cstrong\u003eserious production-grade full-sheet fabrication\u003c\/strong\u003e buyer, where real U.S. demand depends on floor space, material size, power budget, and how much production has to move in-house.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking format:\u003c\/strong\u003e 5x10 open-type fiber laser cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower class:\u003c\/strong\u003e 6000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial positioning:\u003c\/strong\u003e Full-Sheet Production Fiber Laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e higher-throughput full-sheet production with stronger speed and thickness capability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption pack:\u003c\/strong\u003e auto-focus head, nesting software, gas console, fume extraction, dust collection, tube\/rotary consultation, installation planning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e active laser-cutting catalog line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequest a quote\u003c\/strong\u003e for source brand, gas package, software, thickness targets, shop footprint, freight, and installation scope.\u003c\/p\u003e","brand":"EtalTec","offers":[{"title":"Default Title","offer_id":53428887290222,"sku":"FL510-6000-PRODUCTION","price":83000.0,"currency_code":"USD","in_stock":true}]},{"product_id":"fl613-4000-bigsheet-6-5x13-open-fiber-laser","title":"EtalTec FL613-4000-BIGSHEET – BigSheet Open Fiber Laser 6.5x13 4000W","description":"\u003cp\u003e\u003cstrong\u003eEtalTec FL613-4000-BIGSHEET – BigSheet Open Fiber Laser 6.5x13 4000W\u003c\/strong\u003e is part of the EtalTec \u003cstrong\u003eopen-type fiber laser line for sizes we had not covered earlier\u003c\/strong\u003e—from compact in-house systems to bigger full-sheet and long-bed industrial platforms.\u003c\/p\u003e\u003cp\u003eThis model is not presented as a generic size\/power template. It is positioned for the \u003cstrong\u003ebig-sheet fabrication \/ growing industrial throughput\u003c\/strong\u003e buyer, where real U.S. demand depends on floor space, material size, power budget, and how much production has to move in-house.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking format:\u003c\/strong\u003e 6.5x13 open-type fiber laser cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower class:\u003c\/strong\u003e 4000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial positioning:\u003c\/strong\u003e BigSheet Open Fiber Laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e larger-format sheet work, structural panels, bigger jobs without jumping to ultra-high-power budgets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption pack:\u003c\/strong\u003e auto-focus head, nesting software, gas console, fume extraction, dust collection, tube\/rotary consultation, installation planning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e active laser-cutting catalog line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequest a quote\u003c\/strong\u003e for source brand, gas package, software, thickness targets, shop footprint, freight, and installation scope.\u003c\/p\u003e","brand":"EtalTec","offers":[{"title":"Default Title","offer_id":53428887322990,"sku":"FL613-4000-BIGSHEET","price":78852.0,"currency_code":"USD","in_stock":true}]},{"product_id":"fl613-8000-highpower-6-5x13-open-fiber-laser","title":"EtalTec FL613-8000-HIGHPOWER – BigSheet High-Power Open Fiber Laser 6.5x13 8000W","description":"\u003cp\u003e\u003cstrong\u003eEtalTec FL613-8000-HIGHPOWER – BigSheet High-Power Open Fiber Laser 6.5x13 8000W\u003c\/strong\u003e is part of the EtalTec \u003cstrong\u003eopen-type fiber laser line for sizes we had not covered earlier\u003c\/strong\u003e—from compact in-house systems to bigger full-sheet and long-bed industrial platforms.\u003c\/p\u003e\u003cp\u003eThis model is not presented as a generic size\/power template. It is positioned for the \u003cstrong\u003ebig-sheet fabrication \/ growing industrial throughput\u003c\/strong\u003e buyer, where real U.S. demand depends on floor space, material size, power budget, and how much production has to move in-house.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking format:\u003c\/strong\u003e 6.5x13 open-type fiber laser cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower class:\u003c\/strong\u003e 8000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial positioning:\u003c\/strong\u003e BigSheet High-Power Open Fiber Laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e larger-format high-power cutting when sheet size and speed both drive the buying decision\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption pack:\u003c\/strong\u003e auto-focus head, nesting software, gas console, fume extraction, dust collection, tube\/rotary consultation, installation planning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e active laser-cutting catalog line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequest a quote\u003c\/strong\u003e for source brand, gas package, software, thickness targets, shop footprint, freight, and installation scope.\u003c\/p\u003e","brand":"EtalTec","offers":[{"title":"Default Title","offer_id":53428887355758,"sku":"FL613-8000-HIGHPOWER","price":106452.0,"currency_code":"USD","in_stock":true}]},{"product_id":"fl620-6000-longbed-6-5x20-open-fiber-laser","title":"EtalTec FL620-6000-LONGBED – LongBed Open Fiber Laser 6.5x20 6000W","description":"\u003cp\u003e\u003cstrong\u003eEtalTec FL620-6000-LONGBED – LongBed Open Fiber Laser 6.5x20 6000W\u003c\/strong\u003e is part of the EtalTec \u003cstrong\u003eopen-type fiber laser line for sizes we had not covered earlier\u003c\/strong\u003e—from compact in-house systems to bigger full-sheet and long-bed industrial platforms.\u003c\/p\u003e\u003cp\u003eThis model is not presented as a generic size\/power template. It is positioned for the \u003cstrong\u003elong-bed industrial fabrication \/ higher-output plate processing\u003c\/strong\u003e buyer, where real U.S. demand depends on floor space, material size, power budget, and how much production has to move in-house.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking format:\u003c\/strong\u003e 6.5x20 open-type fiber laser cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower class:\u003c\/strong\u003e 6000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial positioning:\u003c\/strong\u003e LongBed Open Fiber Laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e long-bed industrial cutting, larger plate, infrastructure and heavy fabrication workflows\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption pack:\u003c\/strong\u003e auto-focus head, nesting software, gas console, fume extraction, dust collection, tube\/rotary consultation, installation planning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e active laser-cutting catalog line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequest a quote\u003c\/strong\u003e for source brand, gas package, software, thickness targets, shop footprint, freight, and installation scope.\u003c\/p\u003e","brand":"EtalTec","offers":[{"title":"Default Title","offer_id":53428887388526,"sku":"FL620-6000-LONGBED","price":92583.0,"currency_code":"USD","in_stock":true}]},{"product_id":"fl620-12000-highoutput-6-5x20-open-fiber-laser","title":"EtalTec FL620-12000-HIGHOUTPUT – LongBed HighOutput Open Fiber Laser 6.5x20 12000W","description":"\u003cp\u003e\u003cstrong\u003eEtalTec FL620-12000-HIGHOUTPUT – LongBed HighOutput Open Fiber Laser 6.5x20 12000W\u003c\/strong\u003e is part of the EtalTec \u003cstrong\u003eopen-type fiber laser line for sizes we had not covered earlier\u003c\/strong\u003e—from compact in-house systems to bigger full-sheet and long-bed industrial platforms.\u003c\/p\u003e\u003cp\u003eThis model is not presented as a generic size\/power template. It is positioned for the \u003cstrong\u003elong-bed industrial fabrication \/ higher-output plate processing\u003c\/strong\u003e buyer, where real U.S. demand depends on floor space, material size, power budget, and how much production has to move in-house.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking format:\u003c\/strong\u003e 6.5x20 open-type fiber laser cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower class:\u003c\/strong\u003e 12000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial positioning:\u003c\/strong\u003e LongBed HighOutput Open Fiber Laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e high-output long-bed cutting for bigger plate, tougher materials, and premium industrial throughput\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption pack:\u003c\/strong\u003e auto-focus head, nesting software, gas console, fume extraction, dust collection, tube\/rotary consultation, installation planning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e active laser-cutting catalog line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequest a quote\u003c\/strong\u003e for source brand, gas package, software, thickness targets, shop footprint, freight, and installation scope.\u003c\/p\u003e","brand":"EtalTec","offers":[{"title":"Default Title","offer_id":53428887421294,"sku":"FL620-12000-HIGHOUTPUT","price":129900.0,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/umprotech.com\/es\/collections\/all-fiber-laser-cutting-machines-umprotech.oembed","provider":"Fiber Lasers \u0026 Press Brakes in USA | UmproTech","version":"1.0","type":"link"}