{"title":"Machine Retrofit \u0026 Upgrade Services","description":"\u003cp\u003eIndustrial machine retrofit, modernization, controls, electrical, hydraulic and productivity upgrade services from UmproTech.\u003c\/p\u003e","products":[{"product_id":"kollmorgen-servo-drive-motion-control-retrofit-service","title":"Kollmorgen Servo Drive \u0026 Motion Control Retrofit Service","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the Kollmorgen servo and drive package on a CNC machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eServo drive, motor, encoder and controller assessment\u003c\/li\u003e\n\u003cli\u003eObsolete component replacement and migration planning\u003c\/li\u003e\n\u003cli\u003eParameter, fieldbus and communication transfer\u003c\/li\u003e\n\u003cli\u003eAxis tuning, homing and machine-interface integration\u003c\/li\u003e\n\u003cli\u003eStartup testing and motion-performance verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines losing position, alarming on the drives or running hot under duty\u003c\/li\u003e\n\u003cli\u003eOwners whose motor or drive generation is no longer obtainable\u003c\/li\u003e\n\u003cli\u003eShops raising acceleration or duty cycle on existing motion hardware\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with mixed-generation drive packages\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMotor and drive package\u003c\/th\u003e\n\u003ctd\u003eBrand, model, frame size, feedback type and cabling\u003c\/td\u003e\n\u003ctd\u003eFeedback type decides whether motors can be reused\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical coupling\u003c\/th\u003e\n\u003ctd\u003eGearbox ratio, coupling, belt or direct mount\u003c\/td\u003e\n\u003ctd\u003eA drive swap that ignores the mechanics gives you tuned vibration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl interface\u003c\/th\u003e\n\u003ctd\u003ePulse, analog or bus protocol between control and drive\u003c\/td\u003e\n\u003ctd\u003eProtocol compatibility is the first thing that either works or does not\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLoad and duty\u003c\/th\u003e\n\u003ctd\u003eAxis mass, acceleration, duty cycle and thermal load\u003c\/td\u003e\n\u003ctd\u003eSizing on real duty avoids the classic undersized retrofit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCabinet and power\u003c\/th\u003e\n\u003ctd\u003eCabinet space, cooling, incoming supply and braking resistors\u003c\/td\u003e\n\u003ctd\u003eRegenerative loads and heat are usually underestimated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eComponent selection on a cnc machine is part of the configuration, not a fixed bill of materials. These are the assemblies and the options each is chosen from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive options\u003c\/th\u003e\n\u003ctd\u003eKollmorgen\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo motor and drive options\u003c\/th\u003e\n\u003ctd\u003eYaskawa \/ Delta \/ Fuji \/ Panasonic\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVFD and inverter options\u003c\/th\u003e\n\u003ctd\u003eDelta \/ Yaskawa \/ ABB \/ Schneider Electric\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLinear scale and position-feedback options\u003c\/th\u003e\n\u003ctd\u003eHeidenhain \/ Givi Misure \/ Magnescale\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe assessment starts from your data, not from a model number:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eMotor and drive nameplate photos for each affected axis\u003c\/li\u003e\n\u003cli\u003eControl brand, model and the interface it uses to the drives\u003c\/li\u003e\n\u003cli\u003ePhotos of the cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWhat the machine does wrong now — position loss, alarms, overheating, noise\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNew drives do not fix worn ballscrews, racks or bearings\u003c\/li\u003e\n\u003cli\u003eEncoder and feedback mismatches may force motor replacement as well\u003c\/li\u003e\n\u003cli\u003eRetuning on your real parts is part of the job — budget the machine time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eComponent lead time is confirmed in writing before the machine is released from production, and the shutdown is scheduled against it. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eProvide those details and the response states configuration, freight, unloading and startup scope in writing. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482529517934,"sku":"UM-COMP-KOLL-036","price":3900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/kollmorgen-servo-drive-motion-control-retrofit-white-v1_1e024a9b-a80e-44fa-9bea-6ab39fc3365c.png?v=1786025861"},{"product_id":"sew-eurodrive-motor-gearbox-drive-retrofit-service","title":"SEW-EURODRIVE Motor, Gearbox \u0026 Drive Retrofit Service","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eSEW-EURODRIVE Motor, Gearbox \u0026amp; Drive Retrofit Service — independent retrofit and upgrade work carried out on the SEW-EURODRIVE servo and drive package of a CNC machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMotor, gearbox, inverter and encoder assessment\u003c\/li\u003e\n\u003cli\u003eObsolete component replacement and ratio-selection planning\u003c\/li\u003e\n\u003cli\u003eParameter, fieldbus and controller integration\u003c\/li\u003e\n\u003cli\u003eMounting, shaft, coupling and load compatibility review\u003c\/li\u003e\n\u003cli\u003eStartup testing and motion verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines losing position, alarming on the drives or running hot under duty\u003c\/li\u003e\n\u003cli\u003eOwners whose motor or drive generation is no longer obtainable\u003c\/li\u003e\n\u003cli\u003eShops raising acceleration or duty cycle on existing motion hardware\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with mixed-generation drive packages\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMotor and drive package\u003c\/th\u003e\n\u003ctd\u003eBrand, model, frame size, feedback type and cabling\u003c\/td\u003e\n\u003ctd\u003eFeedback type decides whether motors can be reused\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical coupling\u003c\/th\u003e\n\u003ctd\u003eGearbox ratio, coupling, belt or direct mount\u003c\/td\u003e\n\u003ctd\u003eA drive swap that ignores the mechanics gives you tuned vibration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl interface\u003c\/th\u003e\n\u003ctd\u003ePulse, analog or bus protocol between control and drive\u003c\/td\u003e\n\u003ctd\u003eProtocol compatibility is the first thing that either works or does not\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLoad and duty\u003c\/th\u003e\n\u003ctd\u003eAxis mass, acceleration, duty cycle and thermal load\u003c\/td\u003e\n\u003ctd\u003eSizing on real duty avoids the classic undersized retrofit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCabinet and power\u003c\/th\u003e\n\u003ctd\u003eCabinet space, cooling, incoming supply and braking resistors\u003c\/td\u003e\n\u003ctd\u003eRegenerative loads and heat are usually underestimated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eA cnc machine is specified per assembly rather than from one fixed part number. The options below are the shortlist this configuration is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive options\u003c\/th\u003e\n\u003ctd\u003eSEW-EURODRIVE\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo motor and drive options\u003c\/th\u003e\n\u003ctd\u003eYaskawa \/ Delta \/ Fuji \/ Panasonic\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVFD and inverter options\u003c\/th\u003e\n\u003ctd\u003eDelta \/ Yaskawa \/ ABB \/ Schneider Electric\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLinear scale and position-feedback options\u003c\/th\u003e\n\u003ctd\u003eHeidenhain \/ Givi Misure \/ Magnescale\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eSend this set and the first-round questions are already answered:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eMotor and drive nameplate photos for each affected axis\u003c\/li\u003e\n\u003cli\u003eControl brand, model and the interface it uses to the drives\u003c\/li\u003e\n\u003cli\u003ePhotos of the cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWhat the machine does wrong now — position loss, alarms, overheating, noise\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNew drives do not fix worn ballscrews, racks or bearings\u003c\/li\u003e\n\u003cli\u003eEncoder and feedback mismatches may force motor replacement as well\u003c\/li\u003e\n\u003cli\u003eRetuning on your real parts is part of the job — budget the machine time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eParts lead time and the production shutdown window are quoted as separate lines, and the machine is taken out of production only once parts are on hand. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSend the details above and the response is a written quotation covering the equipment, freight, unloading and startup scope. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482530599278,"sku":"UM-COMP-SEW-035","price":3900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/sew-eurodrive-motor-gearbox-drive-retrofit-white-v1_73b03044-2207-42a2-9458-9282e23858f3.png?v=1786025863"},{"product_id":"lenze-drive-motor-motion-control-retrofit-service","title":"Lenze Drive, Motor \u0026 Motion Control Retrofit Service","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eLenze Drive, Motor \u0026amp; Motion Control Retrofit Service — independent retrofit and upgrade work carried out on the Lenze servo and drive package of a CNC machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDrive, motor, encoder and controller assessment\u003c\/li\u003e\n\u003cli\u003eObsolete component replacement and migration planning\u003c\/li\u003e\n\u003cli\u003eParameter, fieldbus and communication transfer\u003c\/li\u003e\n\u003cli\u003eMotor tuning, homing and machine-interface integration\u003c\/li\u003e\n\u003cli\u003eStartup testing and motion verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines losing position, alarming on the drives or running hot under duty\u003c\/li\u003e\n\u003cli\u003eOwners whose motor or drive generation is no longer obtainable\u003c\/li\u003e\n\u003cli\u003eShops raising acceleration or duty cycle on existing motion hardware\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with mixed-generation drive packages\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMotor and drive package\u003c\/th\u003e\n\u003ctd\u003eBrand, model, frame size, feedback type and cabling\u003c\/td\u003e\n\u003ctd\u003eFeedback type decides whether motors can be reused\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical coupling\u003c\/th\u003e\n\u003ctd\u003eGearbox ratio, coupling, belt or direct mount\u003c\/td\u003e\n\u003ctd\u003eA drive swap that ignores the mechanics gives you tuned vibration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl interface\u003c\/th\u003e\n\u003ctd\u003ePulse, analog or bus protocol between control and drive\u003c\/td\u003e\n\u003ctd\u003eProtocol compatibility is the first thing that either works or does not\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLoad and duty\u003c\/th\u003e\n\u003ctd\u003eAxis mass, acceleration, duty cycle and thermal load\u003c\/td\u003e\n\u003ctd\u003eSizing on real duty avoids the classic undersized retrofit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCabinet and power\u003c\/th\u003e\n\u003ctd\u003eCabinet space, cooling, incoming supply and braking resistors\u003c\/td\u003e\n\u003ctd\u003eRegenerative loads and heat are usually underestimated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eEach major assembly on a cnc machine is selected at configuration. The shortlist below is what the build is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive options\u003c\/th\u003e\n\u003ctd\u003eLenze\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo motor and drive options\u003c\/th\u003e\n\u003ctd\u003eYaskawa \/ Delta \/ Fuji \/ Panasonic\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVFD and inverter options\u003c\/th\u003e\n\u003ctd\u003eDelta \/ Yaskawa \/ ABB \/ Schneider Electric\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLinear scale and position-feedback options\u003c\/th\u003e\n\u003ctd\u003eHeidenhain \/ Givi Misure \/ Magnescale\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eNothing is quoted before the affected assembly is identified. Send the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eMotor and drive nameplate photos for each affected axis\u003c\/li\u003e\n\u003cli\u003eControl brand, model and the interface it uses to the drives\u003c\/li\u003e\n\u003cli\u003ePhotos of the cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWhat the machine does wrong now — position loss, alarms, overheating, noise\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNew drives do not fix worn ballscrews, racks or bearings\u003c\/li\u003e\n\u003cli\u003eEncoder and feedback mismatches may force motor replacement as well\u003c\/li\u003e\n\u003cli\u003eRetuning on your real parts is part of the job — budget the machine time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eThe quotation separates parts lead time from the shutdown window, and the machine stays in production until the parts have arrived. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eWith those details the response is a written quotation rather than a price range. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482531025262,"sku":"UM-COMP-LENZE-034","price":3900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/fiber-laser-servo-motor-drive-upgrade-white-v1_f413c0a2-db24-4590-8823-98f16ca073af.png?v=1786025865"},{"product_id":"rittal-electrical-enclosure-cabinet-cooling-retrofit","title":"Rittal Electrical Enclosure \u0026 Cabinet Cooling Retrofit","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the Rittal PLC, HMI and electrical package on a CNC machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eElectrical enclosure condition and heat-load assessment\u003c\/li\u003e\n\u003cli\u003eCabinet, cooling unit, fan, filter and heat-exchanger replacement planning\u003c\/li\u003e\n\u003cli\u003eSealing, cable-entry and environmental-protection improvements\u003c\/li\u003e\n\u003cli\u003eThermostat, alarm and controller integration\u003c\/li\u003e\n\u003cli\u003eTemperature testing and electrical-cabinet verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines running a PLC or HMI platform that is no longer supported\u003c\/li\u003e\n\u003cli\u003eOwners without program source or wiring documentation for a critical machine\u003c\/li\u003e\n\u003cli\u003ePlants standardizing control platforms and spare-part stock across a line\u003c\/li\u003e\n\u003cli\u003eShops adding safety functions that the existing control cannot carry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstalled platform\u003c\/th\u003e\n\u003ctd\u003ePLC and HMI brand, model, firmware and program availability\u003c\/td\u003e\n\u003ctd\u003eWhether the existing program can be migrated or must be rewritten\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProgram and documentation\u003c\/th\u003e\n\u003ctd\u003eSource program, I\/O list and wiring diagrams\u003c\/td\u003e\n\u003ctd\u003eWithout documentation the job becomes reverse engineering, which is billed differently\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O count and cabinet space\u003c\/th\u003e\n\u003ctd\u003ePhysical I\/O, spare capacity and cabinet layout\u003c\/td\u003e\n\u003ctd\u003eCabinet space and heat load are the practical limits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrives and motors\u003c\/th\u003e\n\u003ctd\u003eDrive brand, model and communication protocol\u003c\/td\u003e\n\u003ctd\u003eProtocol mismatch between control and drives is a common blocker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and safety relays\u003c\/td\u003e\n\u003ctd\u003eAny control change re-opens the guarding assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eThe assemblies below are specified while the cnc machine is configured; the shortlist shows the options available for each.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eRittal\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVFD and inverter options\u003c\/th\u003e\n\u003ctd\u003eDelta \/ Yaskawa \/ ABB \/ Schneider Electric\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive options\u003c\/th\u003e\n\u003ctd\u003eEstun \/ Yaskawa \/ Delta \/ Siemens\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety light curtain and interlock options\u003c\/th\u003e\n\u003ctd\u003eSICK \/ Pilz \/ Keyence \/ Banner\u003c\/td\u003e\n\u003ctd\u003eGuarding scope by risk assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe scope is written from these, not from the machine name:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent PLC and HMI brand, model and firmware version\u003c\/li\u003e\n\u003cli\u003ePhotos of the control cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams, I\/O lists and any PLC program backup\u003c\/li\u003e\n\u003cli\u003eA description of the faults or limitations you are trying to solve\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMissing program source can turn a migration into a full rewrite\u003c\/li\u003e\n\u003cli\u003eObsolete field devices may need replacing alongside the control\u003c\/li\u003e\n\u003cli\u003eMachine safety validation after the retrofit is the owner's responsibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eTwo figures are quoted: how long the parts take, and how long the machine is out of production. The shutdown is booked once parts are on hand. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSubmit the intake form with those details and the quotation is prepared against your application rather than a generic specification. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482531385710,"sku":"UM-COMP-RITT-033","price":2900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/cnc-control-panel-rebuild-modernization-white-v1_739413bc-4cac-4cb2-af28-b26f55eb1438.png?v=1786025867"},{"product_id":"airtac-pneumatic-system-retrofit-component-upgrade","title":"AirTAC Pneumatic System Retrofit \u0026 Component Upgrade","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent retrofit and upgrade work on the AirTAC pneumatic package of a production machine in U.S. shops.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eValve manifold, cylinder and air-preparation assessment\u003c\/li\u003e\n\u003cli\u003eObsolete or failed component replacement planning\u003c\/li\u003e\n\u003cli\u003ePLC, sensor and electrical interface integration\u003c\/li\u003e\n\u003cli\u003ePressure, flow, tubing and leak-reduction review\u003c\/li\u003e\n\u003cli\u003eStartup testing and pneumatic-function verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines with slow, weak or inconsistent pneumatic actuation\u003c\/li\u003e\n\u003cli\u003eOwners whose valve or cylinder series has been discontinued\u003c\/li\u003e\n\u003cli\u003ePlants standardizing pneumatic components and fittings across a line\u003c\/li\u003e\n\u003cli\u003eShops adding safety exhaust or dump valves to an older machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAir supply\u003c\/th\u003e\n\u003ctd\u003eCompressor capacity, pressure, dryer and receiver volume\u003c\/td\u003e\n\u003ctd\u003eMost pneumatic complaints are a supply problem, not a component problem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eValve and cylinder package\u003c\/th\u003e\n\u003ctd\u003eBrand, model, port size, stroke and mounting\u003c\/td\u003e\n\u003ctd\u003eDetermines whether the upgrade is a swap or a bracket job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAir preparation\u003c\/th\u003e\n\u003ctd\u003eFilter, regulator, lubricator and condensate handling\u003c\/td\u003e\n\u003ctd\u003eWater and oil carry-over destroy new valves quickly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl interface\u003c\/th\u003e\n\u003ctd\u003eSolenoid voltage, I\/O and safety exhaust requirements\u003c\/td\u003e\n\u003ctd\u003eSafety exhaust and dump valves are frequently missing on older machines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTubing and fittings\u003c\/th\u003e\n\u003ctd\u003eLine size, routing and leak condition\u003c\/td\u003e\n\u003ctd\u003eUndersized tubing quietly limits cycle speed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eA production machine is specified per assembly rather than from one fixed part number. The options below are the shortlist this configuration is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePneumatic component options\u003c\/th\u003e\n\u003ctd\u003eAirTAC\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eSiemens \/ Schneider Electric \/ Delta \/ Omron\u003c\/td\u003e\n\u003ctd\u003eConfigured at build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eComponent identification comes first. Photographs of the nameplate and the open control cabinet answer most first-round questions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003ePhotos of the valve bank, air preparation unit and cylinders\u003c\/li\u003e\n\u003cli\u003eCompressor size, pressure and dryer type\u003c\/li\u003e\n\u003cli\u003eCycle time you have now and cycle time you need\u003c\/li\u003e\n\u003cli\u003eA description of the fault — slow, weak, inconsistent, leaking\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComponent upgrades cannot beat an undersized or wet air supply\u003c\/li\u003e\n\u003cli\u003eCylinder speed is limited by port size and tubing, not by brand\u003c\/li\u003e\n\u003cli\u003eSafety-related pneumatic circuits must be validated after any change\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eParts availability drives the schedule. The shutdown window is agreed separately and only after the components are confirmed in stock. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSend those details through the intake form and the written quotation follows against your application. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482532467054,"sku":"UM-COMP-AIR-032","price":2500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/airtac-pneumatic-system-retrofit-component-upgrade-white-v1_e6d1617a-56c3-4af7-9bae-b70e39a1b25a.png?v=1786025869"},{"product_id":"smc-pneumatic-valve-cylinder-air-system-retrofit","title":"SMC Pneumatic Valve, Cylinder \u0026 Air System Retrofit","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the SMC pneumatic package on a production machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eValve manifold, cylinder and air-preparation assessment\u003c\/li\u003e\n\u003cli\u003eObsolete component replacement and compatibility planning\u003c\/li\u003e\n\u003cli\u003ePLC, sensor and communication integration\u003c\/li\u003e\n\u003cli\u003ePressure, flow, tubing and leak-reduction review\u003c\/li\u003e\n\u003cli\u003eStartup testing and pneumatic-function verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines with slow, weak or inconsistent pneumatic actuation\u003c\/li\u003e\n\u003cli\u003eOwners whose valve or cylinder series has been discontinued\u003c\/li\u003e\n\u003cli\u003ePlants standardizing pneumatic components and fittings across a line\u003c\/li\u003e\n\u003cli\u003eShops adding safety exhaust or dump valves to an older machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAir supply\u003c\/th\u003e\n\u003ctd\u003eCompressor capacity, pressure, dryer and receiver volume\u003c\/td\u003e\n\u003ctd\u003eMost pneumatic complaints are a supply problem, not a component problem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eValve and cylinder package\u003c\/th\u003e\n\u003ctd\u003eBrand, model, port size, stroke and mounting\u003c\/td\u003e\n\u003ctd\u003eDetermines whether the upgrade is a swap or a bracket job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAir preparation\u003c\/th\u003e\n\u003ctd\u003eFilter, regulator, lubricator and condensate handling\u003c\/td\u003e\n\u003ctd\u003eWater and oil carry-over destroy new valves quickly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl interface\u003c\/th\u003e\n\u003ctd\u003eSolenoid voltage, I\/O and safety exhaust requirements\u003c\/td\u003e\n\u003ctd\u003eSafety exhaust and dump valves are frequently missing on older machines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTubing and fittings\u003c\/th\u003e\n\u003ctd\u003eLine size, routing and leak condition\u003c\/td\u003e\n\u003ctd\u003eUndersized tubing quietly limits cycle speed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eA production machine is specified per assembly rather than from one fixed part number. The options below are the shortlist this configuration is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePneumatic component options\u003c\/th\u003e\n\u003ctd\u003eSMC\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eSiemens \/ Schneider Electric \/ Delta \/ Omron\u003c\/td\u003e\n\u003ctd\u003eConfigured at build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe assessment starts from your data, not from a model number:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003ePhotos of the valve bank, air preparation unit and cylinders\u003c\/li\u003e\n\u003cli\u003eCompressor size, pressure and dryer type\u003c\/li\u003e\n\u003cli\u003eCycle time you have now and cycle time you need\u003c\/li\u003e\n\u003cli\u003eA description of the fault — slow, weak, inconsistent, leaking\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComponent upgrades cannot beat an undersized or wet air supply\u003c\/li\u003e\n\u003cli\u003eCylinder speed is limited by port size and tubing, not by brand\u003c\/li\u003e\n\u003cli\u003eSafety-related pneumatic circuits must be validated after any change\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eParts availability drives the schedule. The shutdown window is agreed separately and only after the components are confirmed in stock. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSend those details through the intake form and the written quotation follows against your application. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482532827502,"sku":"UM-COMP-SMC-031","price":2500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/festo-pneumatic-system-automation-upgrade-white-v1_bc25de71-179a-4597-aac1-1f9c1de42948.png?v=1786025871"},{"product_id":"festo-pneumatic-system-retrofit-automation-upgrade","title":"Festo Pneumatic System Retrofit \u0026 Automation Upgrade","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the Festo pneumatic package on a production machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eValve terminal, cylinder and air-preparation assessment\u003c\/li\u003e\n\u003cli\u003eObsolete component replacement and migration planning\u003c\/li\u003e\n\u003cli\u003ePLC, fieldbus and sensor integration\u003c\/li\u003e\n\u003cli\u003ePressure, flow, tubing and leak-reduction review\u003c\/li\u003e\n\u003cli\u003eStartup testing and pneumatic-function verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines with slow, weak or inconsistent pneumatic actuation\u003c\/li\u003e\n\u003cli\u003eOwners whose valve or cylinder series has been discontinued\u003c\/li\u003e\n\u003cli\u003ePlants standardizing pneumatic components and fittings across a line\u003c\/li\u003e\n\u003cli\u003eShops adding safety exhaust or dump valves to an older machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAir supply\u003c\/th\u003e\n\u003ctd\u003eCompressor capacity, pressure, dryer and receiver volume\u003c\/td\u003e\n\u003ctd\u003eMost pneumatic complaints are a supply problem, not a component problem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eValve and cylinder package\u003c\/th\u003e\n\u003ctd\u003eBrand, model, port size, stroke and mounting\u003c\/td\u003e\n\u003ctd\u003eDetermines whether the upgrade is a swap or a bracket job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAir preparation\u003c\/th\u003e\n\u003ctd\u003eFilter, regulator, lubricator and condensate handling\u003c\/td\u003e\n\u003ctd\u003eWater and oil carry-over destroy new valves quickly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl interface\u003c\/th\u003e\n\u003ctd\u003eSolenoid voltage, I\/O and safety exhaust requirements\u003c\/td\u003e\n\u003ctd\u003eSafety exhaust and dump valves are frequently missing on older machines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTubing and fittings\u003c\/th\u003e\n\u003ctd\u003eLine size, routing and leak condition\u003c\/td\u003e\n\u003ctd\u003eUndersized tubing quietly limits cycle speed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eThe assemblies below are specified while the production machine is configured; the shortlist shows the options available for each.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePneumatic component options\u003c\/th\u003e\n\u003ctd\u003eFesto\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eSiemens \/ Schneider Electric \/ Delta \/ Omron\u003c\/td\u003e\n\u003ctd\u003eConfigured at build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe scope is written from these, not from the machine name:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003ePhotos of the valve bank, air preparation unit and cylinders\u003c\/li\u003e\n\u003cli\u003eCompressor size, pressure and dryer type\u003c\/li\u003e\n\u003cli\u003eCycle time you have now and cycle time you need\u003c\/li\u003e\n\u003cli\u003eA description of the fault — slow, weak, inconsistent, leaking\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComponent upgrades cannot beat an undersized or wet air supply\u003c\/li\u003e\n\u003cli\u003eCylinder speed is limited by port size and tubing, not by brand\u003c\/li\u003e\n\u003cli\u003eSafety-related pneumatic circuits must be validated after any change\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eTwo figures are quoted: how long the parts take, and how long the machine is out of production. The shutdown is booked once parts are on hand. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSubmit the intake form with those details and the quotation is prepared against your application rather than a generic specification. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482532893038,"sku":"UM-COMP-FESTO-030","price":2500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/festo-pneumatic-system-automation-upgrade-white-v1_9ff8f767-ace5-4076-9d12-32821f868c59.png?v=1786025873"},{"product_id":"hydac-hydraulic-filtration-accumulator-cooling-upgrade","title":"HYDAC Hydraulic Filtration, Accumulator \u0026 Cooling Upgrade","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent retrofit and upgrade work on the HYDAC hydraulic package of a hydraulic machine in U.S. shops.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFilter, accumulator, cooler and sensor assessment\u003c\/li\u003e\n\u003cli\u003eContamination-control and oil-condition improvement planning\u003c\/li\u003e\n\u003cli\u003ePressure, temperature and differential-pressure monitoring integration\u003c\/li\u003e\n\u003cli\u003eAccumulator sizing, precharge and safety review\u003c\/li\u003e\n\u003cli\u003eStartup testing and hydraulic-system verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines with drift, slow cycles, overheating or a persistent leak\u003c\/li\u003e\n\u003cli\u003eOwners whose valve, pump or cylinder model is no longer obtainable\u003c\/li\u003e\n\u003cli\u003ePlants correcting oil contamination before it damages new components\u003c\/li\u003e\n\u003cli\u003eShops raising duty on an existing hydraulic circuit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCircuit and schematic\u003c\/th\u003e\n\u003ctd\u003eExisting schematic, pressure settings and circuit type\u003c\/td\u003e\n\u003ctd\u003eThe schematic decides whether a component swap is a swap or a redesign\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePump and motor\u003c\/th\u003e\n\u003ctd\u003ePump type, displacement, motor rating and condition\u003c\/td\u003e\n\u003ctd\u003eSets what the circuit can actually deliver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eValves and manifolds\u003c\/th\u003e\n\u003ctd\u003eValve brand, model, response and manifold porting\u003c\/td\u003e\n\u003ctd\u003ePorting mismatches are the usual reason a valve upgrade stalls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiltration, cooling and oil\u003c\/th\u003e\n\u003ctd\u003eFilter rating, cooler capacity and oil condition\u003c\/td\u003e\n\u003ctd\u003eContamination is what kills new components in the first month\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCylinders and seals\u003c\/th\u003e\n\u003ctd\u003eBore, rod condition, seal type and leak history\u003c\/td\u003e\n\u003ctd\u003eDecides reseal versus rebuild versus replace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eComponent selection on a hydraulic machine is part of the configuration, not a fixed bill of materials. These are the assemblies and the options each is chosen from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHydraulic valve options\u003c\/th\u003e\n\u003ctd\u003eHYDAC\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHydraulic pump and power-unit options\u003c\/th\u003e\n\u003ctd\u003eBosch Rexroth \/ Parker \/ HAWE \/ Yuken\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeal and cylinder-packing options\u003c\/th\u003e\n\u003ctd\u003eNOK \/ Hallite \/ Parker \/ Trelleborg\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiltration and cooling options\u003c\/th\u003e\n\u003ctd\u003eHYDAC \/ Parker \/ matched filtration and cooler\u003c\/td\u003e\n\u003ctd\u003eCircuit-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eComponent identification comes first. Photographs of the nameplate and the open control cabinet answer most first-round questions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eHydraulic schematic if you have it, plus photos of the power unit\u003c\/li\u003e\n\u003cli\u003ePump, valve and cylinder nameplate photos\u003c\/li\u003e\n\u003cli\u003eOil analysis or the date of the last oil and filter change\u003c\/li\u003e\n\u003cli\u003eA description of the symptom — drift, slow cycle, heat, noise, leak\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNew components fail fast in contaminated oil — flushing is scope, not an upsell\u003c\/li\u003e\n\u003cli\u003eCylinder bore damage usually means a rebuild, not a reseal\u003c\/li\u003e\n\u003cli\u003eCircuit redesign may change the control requirement as well\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eLead time and downtime are quoted separately; the shutdown is scheduled around parts availability rather than around the order date. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eOnce those are confirmed, the quotation states the configuration, freight and installation scope in writing. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482533646702,"sku":"UM-COMP-HYDAC-029","price":3900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/press-brake-hydraulic-system-rebuild-modernization-white-v1_1047da77-5494-4d53-83ae-310c5edba4b7.png?v=1786025876"},{"product_id":"parker-hydraulic-system-retrofit-component-upgrade","title":"Parker Hydraulic System Retrofit \u0026 Component Upgrade","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eParker Hydraulic System Retrofit \u0026amp; Component Upgrade — independent retrofit and upgrade work carried out on the Parker hydraulic package of a hydraulic machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHydraulic pump, valve, cylinder and manifold assessment\u003c\/li\u003e\n\u003cli\u003eObsolete component replacement and cross-reference planning\u003c\/li\u003e\n\u003cli\u003ePressure, flow, filtration and cooling-system review\u003c\/li\u003e\n\u003cli\u003eElectrical solenoid and controller-interface integration\u003c\/li\u003e\n\u003cli\u003eLeak testing, hydraulic tuning and functional verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines with drift, slow cycles, overheating or a persistent leak\u003c\/li\u003e\n\u003cli\u003eOwners whose valve, pump or cylinder model is no longer obtainable\u003c\/li\u003e\n\u003cli\u003ePlants correcting oil contamination before it damages new components\u003c\/li\u003e\n\u003cli\u003eShops raising duty on an existing hydraulic circuit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCircuit and schematic\u003c\/th\u003e\n\u003ctd\u003eExisting schematic, pressure settings and circuit type\u003c\/td\u003e\n\u003ctd\u003eThe schematic decides whether a component swap is a swap or a redesign\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePump and motor\u003c\/th\u003e\n\u003ctd\u003ePump type, displacement, motor rating and condition\u003c\/td\u003e\n\u003ctd\u003eSets what the circuit can actually deliver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eValves and manifolds\u003c\/th\u003e\n\u003ctd\u003eValve brand, model, response and manifold porting\u003c\/td\u003e\n\u003ctd\u003ePorting mismatches are the usual reason a valve upgrade stalls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiltration, cooling and oil\u003c\/th\u003e\n\u003ctd\u003eFilter rating, cooler capacity and oil condition\u003c\/td\u003e\n\u003ctd\u003eContamination is what kills new components in the first month\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCylinders and seals\u003c\/th\u003e\n\u003ctd\u003eBore, rod condition, seal type and leak history\u003c\/td\u003e\n\u003ctd\u003eDecides reseal versus rebuild versus replace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eThe assemblies below are specified while the hydraulic machine is configured; the shortlist shows the options available for each.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHydraulic valve options\u003c\/th\u003e\n\u003ctd\u003eParker\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHydraulic pump and power-unit options\u003c\/th\u003e\n\u003ctd\u003eBosch Rexroth \/ Parker \/ HAWE \/ Yuken\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeal and cylinder-packing options\u003c\/th\u003e\n\u003ctd\u003eNOK \/ Hallite \/ Parker \/ Trelleborg\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiltration and cooling options\u003c\/th\u003e\n\u003ctd\u003eHYDAC \/ Parker \/ matched filtration and cooler\u003c\/td\u003e\n\u003ctd\u003eCircuit-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eNothing is quoted before the affected assembly is identified. Send the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eHydraulic schematic if you have it, plus photos of the power unit\u003c\/li\u003e\n\u003cli\u003ePump, valve and cylinder nameplate photos\u003c\/li\u003e\n\u003cli\u003eOil analysis or the date of the last oil and filter change\u003c\/li\u003e\n\u003cli\u003eA description of the symptom — drift, slow cycle, heat, noise, leak\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNew components fail fast in contaminated oil — flushing is scope, not an upsell\u003c\/li\u003e\n\u003cli\u003eCylinder bore damage usually means a rebuild, not a reseal\u003c\/li\u003e\n\u003cli\u003eCircuit redesign may change the control requirement as well\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eTwo figures are quoted: how long the parts take, and how long the machine is out of production. The shutdown is booked once parts are on hand. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSubmit the intake form with those details and the quotation is prepared against your application rather than a generic specification. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482534695278,"sku":"UM-COMP-PARK-028","price":3900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/parker-hydraulic-system-retrofit-component-upgrade-white-v1_249dcf7a-0613-45f7-b004-c32fcc1b7b11.png?v=1786025879"},{"product_id":"hoerbiger-press-brake-hydraulic-valve-retrofit-service","title":"HOERBIGER Press Brake Hydraulic Valve Retrofit Service","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the HOERBIGER hydraulic and tooling package on a press brake.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eValve block, proportional valve and manifold assessment\u003c\/li\u003e\n\u003cli\u003eObsolete component replacement and compatibility planning\u003c\/li\u003e\n\u003cli\u003eElectrical solenoid, feedback and controller integration\u003c\/li\u003e\n\u003cli\u003ePressure, synchronization and ram-response tuning\u003c\/li\u003e\n\u003cli\u003eLeak testing, calibration and test bending\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePress brakes with drift, slow cycles, heat or leaks under normal duty\u003c\/li\u003e\n\u003cli\u003eOwners converting to quick-clamp tooling or a servo-pump package\u003c\/li\u003e\n\u003cli\u003eShops whose bend repeatability has fallen off with hydraulic condition\u003c\/li\u003e\n\u003cli\u003eBuyers of used brakes needing a hydraulic condition assessment before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCylinder and seal condition\u003c\/th\u003e\n\u003ctd\u003eBore condition, rod wear, seal type and leak history\u003c\/td\u003e\n\u003ctd\u003eDecides whether a reseal is enough or a cylinder must be rebuilt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eValve package\u003c\/th\u003e\n\u003ctd\u003eProportional valve brand, model and response condition\u003c\/td\u003e\n\u003ctd\u003eThe valve is what turns a control command into a repeatable bend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePump and power unit\u003c\/th\u003e\n\u003ctd\u003ePump type, motor rating, oil condition and cooling\u003c\/td\u003e\n\u003ctd\u003eServo-pump conversions are decided here, on measured duty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTooling and clamping\u003c\/th\u003e\n\u003ctd\u003eClamping standard, tooling condition and tonnage rating\u003c\/td\u003e\n\u003ctd\u003eQuick-clamp conversion must match your existing tool inventory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl interface\u003c\/th\u003e\n\u003ctd\u003eWhether the existing control can drive the new package\u003c\/td\u003e\n\u003ctd\u003eSome upgrades force a control change — better to know before you order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eA press brake is specified per assembly rather than from one fixed part number. The options below are the shortlist this configuration is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC control\u003c\/th\u003e\n\u003ctd\u003eHOERBIGER\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed control before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFeedback devices\u003c\/th\u003e\n\u003ctd\u003eHeidenhain \/ Givi Misure \/ Magnescale linear scales\u003c\/td\u003e\n\u003ctd\u003eMatched to axis count and travel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrives and motors\u003c\/th\u003e\n\u003ctd\u003eEstun \/ Yaskawa \/ Delta \/ Siemens\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety interface\u003c\/th\u003e\n\u003ctd\u003eLazer Safe \/ DSP Fiessler \/ SICK \/ Pilz\u003c\/td\u003e\n\u003ctd\u003eScope set by risk assessment and measured stop time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical integration\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe assessment starts from your data, not from a model number:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePress brake make, model, year, tonnage and bend length\u003c\/li\u003e\n\u003cli\u003ePhotos of the hydraulic power unit, the cylinders and any visible leak\u003c\/li\u003e\n\u003cli\u003eCurrent control brand and model\u003c\/li\u003e\n\u003cli\u003eTooling clamping standard and photos of your tool inventory\u003c\/li\u003e\n\u003cli\u003eOil analysis or last service record if you have one\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eContaminated oil damages new valves quickly — flushing is part of the scope, not an extra\u003c\/li\u003e\n\u003cli\u003eTooling conversion is limited by the existing ram and bed condition\u003c\/li\u003e\n\u003cli\u003eEnergy-saving pump claims depend on your real duty cycle, not on a brochure figure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eParts availability drives the schedule. The shutdown window is agreed separately and only after the components are confirmed in stock. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSend those details through the intake form and the written quotation follows against your application. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482535448942,"sku":"UM-COMP-HOER-027","price":3900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/hoerbiger-press-brake-hydraulic-valve-retrofit-white-v1_011ce33f-07cf-458b-96b8-912eb55dfc1f.png?v=1786025881"},{"product_id":"hawe-hydraulic-power-unit-valve-retrofit-service","title":"HAWE Hydraulic Power Unit \u0026 Valve Retrofit Service","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the HAWE hydraulic package on a hydraulic machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHydraulic power-unit and manifold assessment\u003c\/li\u003e\n\u003cli\u003ePump, valve, accumulator and pressure-control replacement planning\u003c\/li\u003e\n\u003cli\u003eElectrical solenoid and control-interface integration\u003c\/li\u003e\n\u003cli\u003eLeak, pressure and flow diagnostics\u003c\/li\u003e\n\u003cli\u003eStartup testing and hydraulic tuning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines with drift, slow cycles, overheating or a persistent leak\u003c\/li\u003e\n\u003cli\u003eOwners whose valve, pump or cylinder model is no longer obtainable\u003c\/li\u003e\n\u003cli\u003ePlants correcting oil contamination before it damages new components\u003c\/li\u003e\n\u003cli\u003eShops raising duty on an existing hydraulic circuit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCircuit and schematic\u003c\/th\u003e\n\u003ctd\u003eExisting schematic, pressure settings and circuit type\u003c\/td\u003e\n\u003ctd\u003eThe schematic decides whether a component swap is a swap or a redesign\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePump and motor\u003c\/th\u003e\n\u003ctd\u003ePump type, displacement, motor rating and condition\u003c\/td\u003e\n\u003ctd\u003eSets what the circuit can actually deliver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eValves and manifolds\u003c\/th\u003e\n\u003ctd\u003eValve brand, model, response and manifold porting\u003c\/td\u003e\n\u003ctd\u003ePorting mismatches are the usual reason a valve upgrade stalls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiltration, cooling and oil\u003c\/th\u003e\n\u003ctd\u003eFilter rating, cooler capacity and oil condition\u003c\/td\u003e\n\u003ctd\u003eContamination is what kills new components in the first month\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCylinders and seals\u003c\/th\u003e\n\u003ctd\u003eBore, rod condition, seal type and leak history\u003c\/td\u003e\n\u003ctd\u003eDecides reseal versus rebuild versus replace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eComponent selection on a hydraulic machine is part of the configuration, not a fixed bill of materials. These are the assemblies and the options each is chosen from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHydraulic valve options\u003c\/th\u003e\n\u003ctd\u003eHAWE\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHydraulic pump and power-unit options\u003c\/th\u003e\n\u003ctd\u003eBosch Rexroth \/ Parker \/ HAWE \/ Yuken\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeal and cylinder-packing options\u003c\/th\u003e\n\u003ctd\u003eNOK \/ Hallite \/ Parker \/ Trelleborg\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiltration and cooling options\u003c\/th\u003e\n\u003ctd\u003eHYDAC \/ Parker \/ matched filtration and cooler\u003c\/td\u003e\n\u003ctd\u003eCircuit-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe assessment starts from your data, not from a model number:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eHydraulic schematic if you have it, plus photos of the power unit\u003c\/li\u003e\n\u003cli\u003ePump, valve and cylinder nameplate photos\u003c\/li\u003e\n\u003cli\u003eOil analysis or the date of the last oil and filter change\u003c\/li\u003e\n\u003cli\u003eA description of the symptom — drift, slow cycle, heat, noise, leak\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNew components fail fast in contaminated oil — flushing is scope, not an upsell\u003c\/li\u003e\n\u003cli\u003eCylinder bore damage usually means a rebuild, not a reseal\u003c\/li\u003e\n\u003cli\u003eCircuit redesign may change the control requirement as well\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eComponent lead time is confirmed in writing before the machine is released from production, and the shutdown is scheduled against it. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eProvide those details and the response states configuration, freight, unloading and startup scope in writing. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482536169838,"sku":"UM-COMP-HAWE-026","price":3900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/catalog-press-brake-hydraulic-servo-pump-services-white-v1_4329778b-40ce-482d-9796-41d40360ec60.jpg?v=1786025883"},{"product_id":"bosch-rexroth-hydraulic-servo-system-retrofit-service","title":"Bosch Rexroth Hydraulic \u0026 Servo System Retrofit Service","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the Bosch Rexroth hydraulic package on a hydraulic machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHydraulic valve, pump, manifold and pressure-control assessment\u003c\/li\u003e\n\u003cli\u003eServo drive, motor, encoder and controller compatibility review\u003c\/li\u003e\n\u003cli\u003eObsolete component replacement and migration planning\u003c\/li\u003e\n\u003cli\u003eElectrical, fieldbus and machine-interface integration\u003c\/li\u003e\n\u003cli\u003ePressure tuning, axis calibration and functional testing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines with drift, slow cycles, overheating or a persistent leak\u003c\/li\u003e\n\u003cli\u003eOwners whose valve, pump or cylinder model is no longer obtainable\u003c\/li\u003e\n\u003cli\u003ePlants correcting oil contamination before it damages new components\u003c\/li\u003e\n\u003cli\u003eShops raising duty on an existing hydraulic circuit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCircuit and schematic\u003c\/th\u003e\n\u003ctd\u003eExisting schematic, pressure settings and circuit type\u003c\/td\u003e\n\u003ctd\u003eThe schematic decides whether a component swap is a swap or a redesign\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePump and motor\u003c\/th\u003e\n\u003ctd\u003ePump type, displacement, motor rating and condition\u003c\/td\u003e\n\u003ctd\u003eSets what the circuit can actually deliver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eValves and manifolds\u003c\/th\u003e\n\u003ctd\u003eValve brand, model, response and manifold porting\u003c\/td\u003e\n\u003ctd\u003ePorting mismatches are the usual reason a valve upgrade stalls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiltration, cooling and oil\u003c\/th\u003e\n\u003ctd\u003eFilter rating, cooler capacity and oil condition\u003c\/td\u003e\n\u003ctd\u003eContamination is what kills new components in the first month\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCylinders and seals\u003c\/th\u003e\n\u003ctd\u003eBore, rod condition, seal type and leak history\u003c\/td\u003e\n\u003ctd\u003eDecides reseal versus rebuild versus replace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eEach major assembly on a hydraulic machine is selected at configuration. The shortlist below is what the build is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHydraulic valve options\u003c\/th\u003e\n\u003ctd\u003eBosch Rexroth\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHydraulic pump and power-unit options\u003c\/th\u003e\n\u003ctd\u003eBosch Rexroth \/ Parker \/ HAWE \/ Yuken\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeal and cylinder-packing options\u003c\/th\u003e\n\u003ctd\u003eNOK \/ Hallite \/ Parker \/ Trelleborg\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiltration and cooling options\u003c\/th\u003e\n\u003ctd\u003eHYDAC \/ Parker \/ matched filtration and cooler\u003c\/td\u003e\n\u003ctd\u003eCircuit-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe scope is written from these, not from the machine name:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eHydraulic schematic if you have it, plus photos of the power unit\u003c\/li\u003e\n\u003cli\u003ePump, valve and cylinder nameplate photos\u003c\/li\u003e\n\u003cli\u003eOil analysis or the date of the last oil and filter change\u003c\/li\u003e\n\u003cli\u003eA description of the symptom — drift, slow cycle, heat, noise, leak\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNew components fail fast in contaminated oil — flushing is scope, not an upsell\u003c\/li\u003e\n\u003cli\u003eCylinder bore damage usually means a rebuild, not a reseal\u003c\/li\u003e\n\u003cli\u003eCircuit redesign may change the control requirement as well\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eThe schedule follows parts, not the order date: lead time and shutdown window appear as two separate lines on the quotation. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eWith that information the quotation covers configuration, freight and installation scope in one written response. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482536595822,"sku":"UM-COMP-BRX-025","price":3900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/bosch-rexroth-hydraulic-servo-retrofit-white-v1_0a2e4b29-4d62-4f94-b1e4-a1a36019ca48.png?v=1786025885"},{"product_id":"hypcut-high-power-laser-software-migration-recovery","title":"HypCut High-Power Laser Software Migration \u0026 Recovery","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent retrofit and upgrade work on the HypCut software and parameter set of a CNC cutting machine in U.S. shops.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachine configuration and parameter backup\u003c\/li\u003e\n\u003cli\u003eSoftware migration to a replacement industrial computer\u003c\/li\u003e\n\u003cli\u003eController, height control, servo and gas-setting restoration\u003c\/li\u003e\n\u003cli\u003eCutting database, nesting and process-workflow transfer\u003c\/li\u003e\n\u003cli\u003eFunctional checks and representative test cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShops whose nesting or control software is no longer supported on current hardware\u003c\/li\u003e\n\u003cli\u003eOwners who need parameters, recipes and post-processors carried across a migration\u003c\/li\u003e\n\u003cli\u003ePlants standardizing CAM output and machine profiles across several machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with an unclear software license position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstalled version and license\u003c\/th\u003e\n\u003ctd\u003eSoftware build, dongle or license state and ownership\u003c\/td\u003e\n\u003ctd\u003eLicense transfer is the first thing that either works or blocks the whole job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParameter and recipe backup\u003c\/th\u003e\n\u003ctd\u003eWhat backups exist, and where\u003c\/td\u003e\n\u003ctd\u003eWithout a backup the cutting recipes are rebuilt from scratch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePost-processor and machine profile\u003c\/th\u003e\n\u003ctd\u003eMachine profile, post and kerf tables\u003c\/td\u003e\n\u003ctd\u003eThe post is what makes the software output usable on your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHardware compatibility\u003c\/th\u003e\n\u003ctd\u003eControl PC, card, OS and CNC platform\u003c\/td\u003e\n\u003ctd\u003eOlder control cards frequently block a straight software upgrade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperator workflow\u003c\/th\u003e\n\u003ctd\u003eNesting, import formats, ERP hand-off and reporting\u003c\/td\u003e\n\u003ctd\u003eThe migration is judged on the operator workflow, not the install\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eEach major assembly on a cnc cutting machine is selected at configuration. The shortlist below is what the build is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eHypCut\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube CNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess TubePro \/ Au3tech tube suite\u003c\/td\u003e\n\u003ctd\u003eMatched to tube package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNesting and CAM software options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST \/ Lantek \/ Radan \/ Metalix\u003c\/td\u003e\n\u003ctd\u003eQuote-selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eSiemens \/ Schneider Electric \/ Delta \/ Omron\u003c\/td\u003e\n\u003ctd\u003eConfigured at build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eIdentify the unit before anything else — the following is what the assessment works from:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and CNC platform\u003c\/li\u003e\n\u003cli\u003eCurrent software name, version and license or dongle details\u003c\/li\u003e\n\u003cli\u003eAny parameter, recipe or post-processor backups you hold\u003c\/li\u003e\n\u003cli\u003eScreenshots of the current control and nesting screens\u003c\/li\u003e\n\u003cli\u003eTypical part files and the formats your CAD sends\u003c\/li\u003e\n\u003cli\u003eWhat is failing today, in one paragraph\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLicense transfer is decided by the software vendor, not by UmproTech\u003c\/li\u003e\n\u003cli\u003eCutting recipes may need re-validation on your material after migration\u003c\/li\u003e\n\u003cli\u003eSome legacy control hardware cannot run current software at any price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eThe quotation separates parts lead time from the shutdown window, and the machine stays in production until the parts have arrived. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eWith those details the response is a written quotation rather than a price range. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482536989038,"sku":"UM-COMP-HYP-024","price":950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/hypcut-high-power-laser-software-migration-recovery-white-v1_63531f89-37fc-41e5-8541-fa6c9d1414d5.png?v=1786025887"},{"product_id":"tubepro-software-migration-backup-parameter-recovery","title":"TubePro Software Migration, Backup \u0026 Parameter Recovery","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eTubePro Software Migration, Backup \u0026amp; Parameter Recovery — independent retrofit and upgrade work carried out on the TubePro software and parameter set of a CNC cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachine configuration and parameter backup\u003c\/li\u003e\n\u003cli\u003eSoftware migration to a replacement industrial computer\u003c\/li\u003e\n\u003cli\u003eChuck, servo, support, gas and cutting-setting restoration\u003c\/li\u003e\n\u003cli\u003eTube library, nesting and workflow transfer\u003c\/li\u003e\n\u003cli\u003eFunctional checks and representative test cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShops whose nesting or control software is no longer supported on current hardware\u003c\/li\u003e\n\u003cli\u003eOwners who need parameters, recipes and post-processors carried across a migration\u003c\/li\u003e\n\u003cli\u003ePlants standardizing CAM output and machine profiles across several machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with an unclear software license position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstalled version and license\u003c\/th\u003e\n\u003ctd\u003eSoftware build, dongle or license state and ownership\u003c\/td\u003e\n\u003ctd\u003eLicense transfer is the first thing that either works or blocks the whole job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParameter and recipe backup\u003c\/th\u003e\n\u003ctd\u003eWhat backups exist, and where\u003c\/td\u003e\n\u003ctd\u003eWithout a backup the cutting recipes are rebuilt from scratch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePost-processor and machine profile\u003c\/th\u003e\n\u003ctd\u003eMachine profile, post and kerf tables\u003c\/td\u003e\n\u003ctd\u003eThe post is what makes the software output usable on your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHardware compatibility\u003c\/th\u003e\n\u003ctd\u003eControl PC, card, OS and CNC platform\u003c\/td\u003e\n\u003ctd\u003eOlder control cards frequently block a straight software upgrade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperator workflow\u003c\/th\u003e\n\u003ctd\u003eNesting, import formats, ERP hand-off and reporting\u003c\/td\u003e\n\u003ctd\u003eThe migration is judged on the operator workflow, not the install\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eEach major assembly on a cnc cutting machine is selected at configuration. The shortlist below is what the build is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eTubePro\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube CNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess TubePro \/ Au3tech tube suite\u003c\/td\u003e\n\u003ctd\u003eMatched to tube package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNesting and CAM software options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST \/ Lantek \/ Radan \/ Metalix\u003c\/td\u003e\n\u003ctd\u003eQuote-selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eSiemens \/ Schneider Electric \/ Delta \/ Omron\u003c\/td\u003e\n\u003ctd\u003eConfigured at build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eNothing is quoted before the affected assembly is identified. Send the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and CNC platform\u003c\/li\u003e\n\u003cli\u003eCurrent software name, version and license or dongle details\u003c\/li\u003e\n\u003cli\u003eAny parameter, recipe or post-processor backups you hold\u003c\/li\u003e\n\u003cli\u003eScreenshots of the current control and nesting screens\u003c\/li\u003e\n\u003cli\u003eTypical part files and the formats your CAD sends\u003c\/li\u003e\n\u003cli\u003eWhat is failing today, in one paragraph\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLicense transfer is decided by the software vendor, not by UmproTech\u003c\/li\u003e\n\u003cli\u003eCutting recipes may need re-validation on your material after migration\u003c\/li\u003e\n\u003cli\u003eSome legacy control hardware cannot run current software at any price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eThe schedule follows parts, not the order date: lead time and shutdown window appear as two separate lines on the quotation. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eWith that information the quotation covers configuration, freight and installation scope in one written response. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482538103150,"sku":"UM-COMP-TUBE-023","price":950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/cypcut-software-migration-backup-parameter-recovery-white-v1_a950b9a2-f666-41e7-bb5d-a2f01c69f929.png?v=1786025890"},{"product_id":"sigmanest-cad-cam-migration-postprocessor-support","title":"SigmaNEST CAD\/CAM Migration \u0026 Postprocessor Support","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eSigmaNEST CAD\/CAM Migration \u0026amp; Postprocessor Support — independent retrofit and upgrade work carried out on the SigmaNEST software and parameter set of a CNC cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSoftware migration to replacement workstations\u003c\/li\u003e\n\u003cli\u003eMachine, material and technology-database transfer\u003c\/li\u003e\n\u003cli\u003ePostprocessor review and compatible machine-output setup\u003c\/li\u003e\n\u003cli\u003eNesting workflow, remnant and file-management configuration\u003c\/li\u003e\n\u003cli\u003eBackup planning, test programs and operator guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShops whose nesting or control software is no longer supported on current hardware\u003c\/li\u003e\n\u003cli\u003eOwners who need parameters, recipes and post-processors carried across a migration\u003c\/li\u003e\n\u003cli\u003ePlants standardizing CAM output and machine profiles across several machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with an unclear software license position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstalled version and license\u003c\/th\u003e\n\u003ctd\u003eSoftware build, dongle or license state and ownership\u003c\/td\u003e\n\u003ctd\u003eLicense transfer is the first thing that either works or blocks the whole job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParameter and recipe backup\u003c\/th\u003e\n\u003ctd\u003eWhat backups exist, and where\u003c\/td\u003e\n\u003ctd\u003eWithout a backup the cutting recipes are rebuilt from scratch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePost-processor and machine profile\u003c\/th\u003e\n\u003ctd\u003eMachine profile, post and kerf tables\u003c\/td\u003e\n\u003ctd\u003eThe post is what makes the software output usable on your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHardware compatibility\u003c\/th\u003e\n\u003ctd\u003eControl PC, card, OS and CNC platform\u003c\/td\u003e\n\u003ctd\u003eOlder control cards frequently block a straight software upgrade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperator workflow\u003c\/th\u003e\n\u003ctd\u003eNesting, import formats, ERP hand-off and reporting\u003c\/td\u003e\n\u003ctd\u003eThe migration is judged on the operator workflow, not the install\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eEach major assembly on a cnc cutting machine is selected at configuration. The shortlist below is what the build is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube CNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess TubePro \/ Au3tech tube suite\u003c\/td\u003e\n\u003ctd\u003eMatched to tube package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNesting and CAM software options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST \/ Lantek \/ Radan \/ Metalix\u003c\/td\u003e\n\u003ctd\u003eQuote-selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eSiemens \/ Schneider Electric \/ Delta \/ Omron\u003c\/td\u003e\n\u003ctd\u003eConfigured at build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eNothing is quoted before the affected assembly is identified. Send the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and CNC platform\u003c\/li\u003e\n\u003cli\u003eCurrent software name, version and license or dongle details\u003c\/li\u003e\n\u003cli\u003eAny parameter, recipe or post-processor backups you hold\u003c\/li\u003e\n\u003cli\u003eScreenshots of the current control and nesting screens\u003c\/li\u003e\n\u003cli\u003eTypical part files and the formats your CAD sends\u003c\/li\u003e\n\u003cli\u003eWhat is failing today, in one paragraph\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLicense transfer is decided by the software vendor, not by UmproTech\u003c\/li\u003e\n\u003cli\u003eCutting recipes may need re-validation on your material after migration\u003c\/li\u003e\n\u003cli\u003eSome legacy control hardware cannot run current software at any price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eThe schedule follows parts, not the order date: lead time and shutdown window appear as two separate lines on the quotation. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eWith that information the quotation covers configuration, freight and installation scope in one written response. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482538824046,"sku":"UM-COMP-SIGMA-022","price":1500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/lantek-cad-cam-migration-postprocessor-setup-white-v1_91467db7-dca7-4263-bfdd-1ae7a0a5dca4.png?v=1786025892"},{"product_id":"lantek-cad-cam-migration-postprocessor-setup-service","title":"Lantek CAD\/CAM Migration, Postprocessor \u0026 Setup Service","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eLantek CAD\/CAM Migration, Postprocessor \u0026amp; Setup Service — independent retrofit and upgrade work carried out on the Lantek software and parameter set of a CNC cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSoftware migration to replacement workstations\u003c\/li\u003e\n\u003cli\u003eMachine database, material and technology-table transfer\u003c\/li\u003e\n\u003cli\u003ePostprocessor review and compatible machine-output setup\u003c\/li\u003e\n\u003cli\u003eNesting workflow, file-path and network configuration\u003c\/li\u003e\n\u003cli\u003eBackup planning, testing and operator guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShops whose nesting or control software is no longer supported on current hardware\u003c\/li\u003e\n\u003cli\u003eOwners who need parameters, recipes and post-processors carried across a migration\u003c\/li\u003e\n\u003cli\u003ePlants standardizing CAM output and machine profiles across several machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with an unclear software license position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstalled version and license\u003c\/th\u003e\n\u003ctd\u003eSoftware build, dongle or license state and ownership\u003c\/td\u003e\n\u003ctd\u003eLicense transfer is the first thing that either works or blocks the whole job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParameter and recipe backup\u003c\/th\u003e\n\u003ctd\u003eWhat backups exist, and where\u003c\/td\u003e\n\u003ctd\u003eWithout a backup the cutting recipes are rebuilt from scratch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePost-processor and machine profile\u003c\/th\u003e\n\u003ctd\u003eMachine profile, post and kerf tables\u003c\/td\u003e\n\u003ctd\u003eThe post is what makes the software output usable on your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHardware compatibility\u003c\/th\u003e\n\u003ctd\u003eControl PC, card, OS and CNC platform\u003c\/td\u003e\n\u003ctd\u003eOlder control cards frequently block a straight software upgrade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperator workflow\u003c\/th\u003e\n\u003ctd\u003eNesting, import formats, ERP hand-off and reporting\u003c\/td\u003e\n\u003ctd\u003eThe migration is judged on the operator workflow, not the install\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eA cnc cutting machine is specified per assembly rather than from one fixed part number. The options below are the shortlist this configuration is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eLantek\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube CNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess TubePro \/ Au3tech tube suite\u003c\/td\u003e\n\u003ctd\u003eMatched to tube package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNesting and CAM software options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST \/ Lantek \/ Radan \/ Metalix\u003c\/td\u003e\n\u003ctd\u003eQuote-selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eSiemens \/ Schneider Electric \/ Delta \/ Omron\u003c\/td\u003e\n\u003ctd\u003eConfigured at build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eSend this set and the first-round questions are already answered:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and CNC platform\u003c\/li\u003e\n\u003cli\u003eCurrent software name, version and license or dongle details\u003c\/li\u003e\n\u003cli\u003eAny parameter, recipe or post-processor backups you hold\u003c\/li\u003e\n\u003cli\u003eScreenshots of the current control and nesting screens\u003c\/li\u003e\n\u003cli\u003eTypical part files and the formats your CAD sends\u003c\/li\u003e\n\u003cli\u003eWhat is failing today, in one paragraph\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLicense transfer is decided by the software vendor, not by UmproTech\u003c\/li\u003e\n\u003cli\u003eCutting recipes may need re-validation on your material after migration\u003c\/li\u003e\n\u003cli\u003eSome legacy control hardware cannot run current software at any price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eParts lead time and the production shutdown window are quoted as separate lines, and the machine is taken out of production only once parts are on hand. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSend the details above and the response is a written quotation covering the equipment, freight, unloading and startup scope. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482539741550,"sku":"UM-COMP-LANT-021","price":1500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/lantek-cad-cam-migration-postprocessor-setup-white-v1_87477e96-69de-47e5-8eda-913fda496128.png?v=1786025895"},{"product_id":"keyence-sensor-vision-measurement-retrofit-for-cnc-machines","title":"Keyence Sensor, Vision \u0026 Measurement Retrofit for CNC Machines","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eKeyence Sensor, Vision \u0026amp; Measurement Retrofit for CNC Machines — independent retrofit and upgrade work carried out on the Keyence PLC, HMI and electrical package of a CNC machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSensor, camera and measurement-application assessment\u003c\/li\u003e\n\u003cli\u003eReplacement of obsolete or failed inspection components\u003c\/li\u003e\n\u003cli\u003ePLC, trigger, encoder and network integration\u003c\/li\u003e\n\u003cli\u003ePart-presence, position, dimension or quality-check setup\u003c\/li\u003e\n\u003cli\u003eCalibration, testing and operator guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines running a PLC or HMI platform that is no longer supported\u003c\/li\u003e\n\u003cli\u003eOwners without program source or wiring documentation for a critical machine\u003c\/li\u003e\n\u003cli\u003ePlants standardizing control platforms and spare-part stock across a line\u003c\/li\u003e\n\u003cli\u003eShops adding safety functions that the existing control cannot carry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstalled platform\u003c\/th\u003e\n\u003ctd\u003ePLC and HMI brand, model, firmware and program availability\u003c\/td\u003e\n\u003ctd\u003eWhether the existing program can be migrated or must be rewritten\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProgram and documentation\u003c\/th\u003e\n\u003ctd\u003eSource program, I\/O list and wiring diagrams\u003c\/td\u003e\n\u003ctd\u003eWithout documentation the job becomes reverse engineering, which is billed differently\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O count and cabinet space\u003c\/th\u003e\n\u003ctd\u003ePhysical I\/O, spare capacity and cabinet layout\u003c\/td\u003e\n\u003ctd\u003eCabinet space and heat load are the practical limits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrives and motors\u003c\/th\u003e\n\u003ctd\u003eDrive brand, model and communication protocol\u003c\/td\u003e\n\u003ctd\u003eProtocol mismatch between control and drives is a common blocker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and safety relays\u003c\/td\u003e\n\u003ctd\u003eAny control change re-opens the guarding assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eThe assemblies below are specified while the cnc machine is configured; the shortlist shows the options available for each.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eKeyence\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVFD and inverter options\u003c\/th\u003e\n\u003ctd\u003eDelta \/ Yaskawa \/ ABB \/ Schneider Electric\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive options\u003c\/th\u003e\n\u003ctd\u003eEstun \/ Yaskawa \/ Delta \/ Siemens\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety light curtain and interlock options\u003c\/th\u003e\n\u003ctd\u003eSICK \/ Pilz \/ Keyence \/ Banner\u003c\/td\u003e\n\u003ctd\u003eGuarding scope by risk assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eNothing is quoted before the affected assembly is identified. Send the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent PLC and HMI brand, model and firmware version\u003c\/li\u003e\n\u003cli\u003ePhotos of the control cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams, I\/O lists and any PLC program backup\u003c\/li\u003e\n\u003cli\u003eA description of the faults or limitations you are trying to solve\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMissing program source can turn a migration into a full rewrite\u003c\/li\u003e\n\u003cli\u003eObsolete field devices may need replacing alongside the control\u003c\/li\u003e\n\u003cli\u003eMachine safety validation after the retrofit is the owner's responsibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eTwo figures are quoted: how long the parts take, and how long the machine is out of production. The shutdown is booked once parts are on hand. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSubmit the intake form with those details and the quotation is prepared against your application rather than a generic specification. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482540495214,"sku":"UM-COMP-KEY-020","price":2900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/keyence-sensor-vision-measurement-retrofit-cnc_33c10f0c-3953-475a-a11c-5f85b87d547e.png?v=1786025898"},{"product_id":"pilz-safety-plc-machine-guarding-retrofit-service","title":"Pilz Safety PLC \u0026 Machine Guarding Retrofit Service","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent retrofit and upgrade work on the Pilz safety and guarding package of a production machine in U.S. shops.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSafety PLC, relay and input-device assessment\u003c\/li\u003e\n\u003cli\u003eObsolete hardware replacement and migration planning\u003c\/li\u003e\n\u003cli\u003eEmergency-stop, gate-switch and light-curtain integration\u003c\/li\u003e\n\u003cli\u003eSafety logic, reset and monitoring-circuit setup\u003c\/li\u003e\n\u003cli\u003eFunctional testing and documented observations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines whose guarding no longer matches how the job is actually run\u003c\/li\u003e\n\u003cli\u003eOwners preparing for an audit or a change of ownership\u003c\/li\u003e\n\u003cli\u003ePlants integrating legacy devices into a modern safety circuit\u003c\/li\u003e\n\u003cli\u003eShops that need stop-time measurement behind their guard distances\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRisk assessment\u003c\/th\u003e\n\u003ctd\u003eExisting assessment, hazard list and required performance level\u003c\/td\u003e\n\u003ctd\u003eThe assessment decides the device class — everything else follows it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExisting safety devices\u003c\/th\u003e\n\u003ctd\u003eBrand, model, age and validity of the current devices\u003c\/td\u003e\n\u003ctd\u003eSome legacy devices cannot be integrated into a modern safety circuit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl interface\u003c\/th\u003e\n\u003ctd\u003eSafety relay or safety PLC, stop category and response time\u003c\/td\u003e\n\u003ctd\u003eStop time measurement decides mounting distance, which decides layout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine stopping performance\u003c\/th\u003e\n\u003ctd\u003eMeasured stop time and overrun\u003c\/td\u003e\n\u003ctd\u003eGuard distance is calculated from measured stop time, not from a catalog\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAccess and workflow\u003c\/th\u003e\n\u003ctd\u003eLoad, unload, tooling change and maintenance access\u003c\/td\u003e\n\u003ctd\u003eGuarding that blocks the workflow gets defeated within a month\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eEach major assembly on a production machine is selected at configuration. The shortlist below is what the build is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety light curtain and interlock options\u003c\/th\u003e\n\u003ctd\u003ePilz\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser safety window and enclosure options\u003c\/th\u003e\n\u003ctd\u003eLaserVision \/ Kentek-class certified materials\u003c\/td\u003e\n\u003ctd\u003eRated to the delivered wavelength and power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eSiemens \/ Schneider Electric \/ Delta \/ Omron\u003c\/td\u003e\n\u003ctd\u003eConfigured at build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eIdentify the unit before anything else — the following is what the assessment works from:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003ePhotos of the machine from every access side, and of the current guarding\u003c\/li\u003e\n\u003cli\u003eCurrent safety device brand and model\u003c\/li\u003e\n\u003cli\u003eYour existing risk assessment if you have one\u003c\/li\u003e\n\u003cli\u003eHow the operator loads, unloads and changes tooling\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFinal compliance on your floor remains the machine owner's responsibility\u003c\/li\u003e\n\u003cli\u003eStop-time measurement is part of the job — distances cannot be assumed\u003c\/li\u003e\n\u003cli\u003eGuarding that is not designed around the real workflow will be bypassed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eThe quotation separates parts lead time from the shutdown window, and the machine stays in production until the parts have arrived. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eWith those details the response is a written quotation rather than a price range. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482541937006,"sku":"UM-COMP-PILZ-019","price":2900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/pilz-safety-plc-machine-guarding-retrofit-service_2ba90bf1-a981-4e0f-9f79-98526b15cc82.png?v=1786025900"},{"product_id":"sick-machine-safety-sensor-light-curtain-retrofit","title":"SICK Machine Safety Sensor \u0026 Light Curtain Retrofit","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the SICK safety and guarding package on a production machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eExisting safety-device and hazard-area assessment\u003c\/li\u003e\n\u003cli\u003eLight curtain, scanner, switch or sensor replacement\u003c\/li\u003e\n\u003cli\u003eSafety relay, PLC and emergency-stop integration\u003c\/li\u003e\n\u003cli\u003eMounting, alignment, muting and reset-circuit setup\u003c\/li\u003e\n\u003cli\u003eFunctional testing and documented observations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines whose guarding no longer matches how the job is actually run\u003c\/li\u003e\n\u003cli\u003eOwners preparing for an audit or a change of ownership\u003c\/li\u003e\n\u003cli\u003ePlants integrating legacy devices into a modern safety circuit\u003c\/li\u003e\n\u003cli\u003eShops that need stop-time measurement behind their guard distances\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRisk assessment\u003c\/th\u003e\n\u003ctd\u003eExisting assessment, hazard list and required performance level\u003c\/td\u003e\n\u003ctd\u003eThe assessment decides the device class — everything else follows it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExisting safety devices\u003c\/th\u003e\n\u003ctd\u003eBrand, model, age and validity of the current devices\u003c\/td\u003e\n\u003ctd\u003eSome legacy devices cannot be integrated into a modern safety circuit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl interface\u003c\/th\u003e\n\u003ctd\u003eSafety relay or safety PLC, stop category and response time\u003c\/td\u003e\n\u003ctd\u003eStop time measurement decides mounting distance, which decides layout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine stopping performance\u003c\/th\u003e\n\u003ctd\u003eMeasured stop time and overrun\u003c\/td\u003e\n\u003ctd\u003eGuard distance is calculated from measured stop time, not from a catalog\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAccess and workflow\u003c\/th\u003e\n\u003ctd\u003eLoad, unload, tooling change and maintenance access\u003c\/td\u003e\n\u003ctd\u003eGuarding that blocks the workflow gets defeated within a month\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eEach major assembly on a production machine is selected at configuration. The shortlist below is what the build is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety light curtain and interlock options\u003c\/th\u003e\n\u003ctd\u003eSICK\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser safety window and enclosure options\u003c\/th\u003e\n\u003ctd\u003eLaserVision \/ Kentek-class certified materials\u003c\/td\u003e\n\u003ctd\u003eRated to the delivered wavelength and power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eSiemens \/ Schneider Electric \/ Delta \/ Omron\u003c\/td\u003e\n\u003ctd\u003eConfigured at build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe scope is written from these, not from the machine name:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003ePhotos of the machine from every access side, and of the current guarding\u003c\/li\u003e\n\u003cli\u003eCurrent safety device brand and model\u003c\/li\u003e\n\u003cli\u003eYour existing risk assessment if you have one\u003c\/li\u003e\n\u003cli\u003eHow the operator loads, unloads and changes tooling\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFinal compliance on your floor remains the machine owner's responsibility\u003c\/li\u003e\n\u003cli\u003eStop-time measurement is part of the job — distances cannot be assumed\u003c\/li\u003e\n\u003cli\u003eGuarding that is not designed around the real workflow will be bypassed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eThe schedule follows parts, not the order date: lead time and shutdown window appear as two separate lines on the quotation. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eWith that information the quotation covers configuration, freight and installation scope in one written response. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482542461294,"sku":"UM-COMP-SICK-018","price":2900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/sick-machine-safety-sensor-light-curtain-retrofit_7dc48145-e391-4b5d-8006-6b5bae486f0a.png?v=1786025903"},{"product_id":"schneider-electric-plc-hmi-drive-retrofit-service","title":"Schneider Electric PLC, HMI \u0026 Drive Retrofit Service","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the Schneider Electric PLC, HMI and electrical package on a CNC machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePLC, HMI, VFD and I\/O system assessment\u003c\/li\u003e\n\u003cli\u003eObsolete hardware replacement and migration planning\u003c\/li\u003e\n\u003cli\u003eProgram, parameter and communication transfer\u003c\/li\u003e\n\u003cli\u003eMotor-control, network and safety-interface integration\u003c\/li\u003e\n\u003cli\u003eStartup testing and machine-function verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines running a PLC or HMI platform that is no longer supported\u003c\/li\u003e\n\u003cli\u003eOwners without program source or wiring documentation for a critical machine\u003c\/li\u003e\n\u003cli\u003ePlants standardizing control platforms and spare-part stock across a line\u003c\/li\u003e\n\u003cli\u003eShops adding safety functions that the existing control cannot carry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstalled platform\u003c\/th\u003e\n\u003ctd\u003ePLC and HMI brand, model, firmware and program availability\u003c\/td\u003e\n\u003ctd\u003eWhether the existing program can be migrated or must be rewritten\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProgram and documentation\u003c\/th\u003e\n\u003ctd\u003eSource program, I\/O list and wiring diagrams\u003c\/td\u003e\n\u003ctd\u003eWithout documentation the job becomes reverse engineering, which is billed differently\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O count and cabinet space\u003c\/th\u003e\n\u003ctd\u003ePhysical I\/O, spare capacity and cabinet layout\u003c\/td\u003e\n\u003ctd\u003eCabinet space and heat load are the practical limits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrives and motors\u003c\/th\u003e\n\u003ctd\u003eDrive brand, model and communication protocol\u003c\/td\u003e\n\u003ctd\u003eProtocol mismatch between control and drives is a common blocker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and safety relays\u003c\/td\u003e\n\u003ctd\u003eAny control change re-opens the guarding assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eThe assemblies below are specified while the cnc machine is configured; the shortlist shows the options available for each.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVFD and inverter options\u003c\/th\u003e\n\u003ctd\u003eDelta \/ Yaskawa \/ ABB \/ Schneider Electric\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive options\u003c\/th\u003e\n\u003ctd\u003eEstun \/ Yaskawa \/ Delta \/ Siemens\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety light curtain and interlock options\u003c\/th\u003e\n\u003ctd\u003eSICK \/ Pilz \/ Keyence \/ Banner\u003c\/td\u003e\n\u003ctd\u003eGuarding scope by risk assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe scope is written from these, not from the machine name:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent PLC and HMI brand, model and firmware version\u003c\/li\u003e\n\u003cli\u003ePhotos of the control cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams, I\/O lists and any PLC program backup\u003c\/li\u003e\n\u003cli\u003eA description of the faults or limitations you are trying to solve\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMissing program source can turn a migration into a full rewrite\u003c\/li\u003e\n\u003cli\u003eObsolete field devices may need replacing alongside the control\u003c\/li\u003e\n\u003cli\u003eMachine safety validation after the retrofit is the owner's responsibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eDowntime is quoted apart from parts lead time so the shutdown can be planned around your production rather than around procurement. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eComplete the intake with those details and the quotation is issued against your parts and your site. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482543739246,"sku":"UM-COMP-SCHN-017","price":3900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/schneider-electric-plc-hmi-drive-retrofit-service_cdf2e25e-7273-4f78-9462-29d55a9922b9.png?v=1786025905"},{"product_id":"omron-plc-hmi-safety-control-retrofit-service","title":"Omron PLC, HMI \u0026 Safety Control Retrofit Service","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the Omron PLC, HMI and electrical package on a CNC machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePLC, HMI, safety controller and I\/O assessment\u003c\/li\u003e\n\u003cli\u003eObsolete hardware replacement and migration planning\u003c\/li\u003e\n\u003cli\u003eProgram, parameter and network transfer\u003c\/li\u003e\n\u003cli\u003eServo, encoder and machine-interface integration\u003c\/li\u003e\n\u003cli\u003eStartup testing and safety-function verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines running a PLC or HMI platform that is no longer supported\u003c\/li\u003e\n\u003cli\u003eOwners without program source or wiring documentation for a critical machine\u003c\/li\u003e\n\u003cli\u003ePlants standardizing control platforms and spare-part stock across a line\u003c\/li\u003e\n\u003cli\u003eShops adding safety functions that the existing control cannot carry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstalled platform\u003c\/th\u003e\n\u003ctd\u003ePLC and HMI brand, model, firmware and program availability\u003c\/td\u003e\n\u003ctd\u003eWhether the existing program can be migrated or must be rewritten\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProgram and documentation\u003c\/th\u003e\n\u003ctd\u003eSource program, I\/O list and wiring diagrams\u003c\/td\u003e\n\u003ctd\u003eWithout documentation the job becomes reverse engineering, which is billed differently\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O count and cabinet space\u003c\/th\u003e\n\u003ctd\u003ePhysical I\/O, spare capacity and cabinet layout\u003c\/td\u003e\n\u003ctd\u003eCabinet space and heat load are the practical limits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrives and motors\u003c\/th\u003e\n\u003ctd\u003eDrive brand, model and communication protocol\u003c\/td\u003e\n\u003ctd\u003eProtocol mismatch between control and drives is a common blocker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and safety relays\u003c\/td\u003e\n\u003ctd\u003eAny control change re-opens the guarding assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eEach major assembly on a cnc machine is selected at configuration. The shortlist below is what the build is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eOmron\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVFD and inverter options\u003c\/th\u003e\n\u003ctd\u003eDelta \/ Yaskawa \/ ABB \/ Schneider Electric\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive options\u003c\/th\u003e\n\u003ctd\u003eEstun \/ Yaskawa \/ Delta \/ Siemens\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety light curtain and interlock options\u003c\/th\u003e\n\u003ctd\u003eSICK \/ Pilz \/ Keyence \/ Banner\u003c\/td\u003e\n\u003ctd\u003eGuarding scope by risk assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe scope is written from these, not from the machine name:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent PLC and HMI brand, model and firmware version\u003c\/li\u003e\n\u003cli\u003ePhotos of the control cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams, I\/O lists and any PLC program backup\u003c\/li\u003e\n\u003cli\u003eA description of the faults or limitations you are trying to solve\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMissing program source can turn a migration into a full rewrite\u003c\/li\u003e\n\u003cli\u003eObsolete field devices may need replacing alongside the control\u003c\/li\u003e\n\u003cli\u003eMachine safety validation after the retrofit is the owner's responsibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eThe quotation separates parts lead time from the shutdown window, and the machine stays in production until the parts have arrived. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eWith those details the response is a written quotation rather than a price range. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482544525678,"sku":"UM-COMP-OMR-016","price":3900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/omron-plc-hmi-safety-control-retrofit-service_770ce569-7cdd-4b72-8db8-e8f2d9459e15.png?v=1786025908"},{"product_id":"delta-plc-hmi-servo-drive-retrofit-service","title":"Delta PLC, HMI \u0026 Servo Drive Retrofit Service","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent retrofit and upgrade work on the Delta servo and drive package of a CNC machine in U.S. shops.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePLC, HMI, servo drive and motor condition review\u003c\/li\u003e\n\u003cli\u003eObsolete component replacement and migration planning\u003c\/li\u003e\n\u003cli\u003eProgram, parameter and communication transfer\u003c\/li\u003e\n\u003cli\u003eEncoder, fieldbus and machine-interface integration\u003c\/li\u003e\n\u003cli\u003eStartup testing and functional verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines losing position, alarming on the drives or running hot under duty\u003c\/li\u003e\n\u003cli\u003eOwners whose motor or drive generation is no longer obtainable\u003c\/li\u003e\n\u003cli\u003eShops raising acceleration or duty cycle on existing motion hardware\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with mixed-generation drive packages\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMotor and drive package\u003c\/th\u003e\n\u003ctd\u003eBrand, model, frame size, feedback type and cabling\u003c\/td\u003e\n\u003ctd\u003eFeedback type decides whether motors can be reused\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical coupling\u003c\/th\u003e\n\u003ctd\u003eGearbox ratio, coupling, belt or direct mount\u003c\/td\u003e\n\u003ctd\u003eA drive swap that ignores the mechanics gives you tuned vibration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl interface\u003c\/th\u003e\n\u003ctd\u003ePulse, analog or bus protocol between control and drive\u003c\/td\u003e\n\u003ctd\u003eProtocol compatibility is the first thing that either works or does not\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLoad and duty\u003c\/th\u003e\n\u003ctd\u003eAxis mass, acceleration, duty cycle and thermal load\u003c\/td\u003e\n\u003ctd\u003eSizing on real duty avoids the classic undersized retrofit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCabinet and power\u003c\/th\u003e\n\u003ctd\u003eCabinet space, cooling, incoming supply and braking resistors\u003c\/td\u003e\n\u003ctd\u003eRegenerative loads and heat are usually underestimated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eThe assemblies below are specified while the cnc machine is configured; the shortlist shows the options available for each.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive options\u003c\/th\u003e\n\u003ctd\u003eDelta\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo motor and drive options\u003c\/th\u003e\n\u003ctd\u003eYaskawa \/ Delta \/ Fuji \/ Panasonic\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVFD and inverter options\u003c\/th\u003e\n\u003ctd\u003eDelta \/ Yaskawa \/ ABB \/ Schneider Electric\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLinear scale and position-feedback options\u003c\/th\u003e\n\u003ctd\u003eHeidenhain \/ Givi Misure \/ Magnescale\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eIdentify the unit before anything else — the following is what the assessment works from:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eMotor and drive nameplate photos for each affected axis\u003c\/li\u003e\n\u003cli\u003eControl brand, model and the interface it uses to the drives\u003c\/li\u003e\n\u003cli\u003ePhotos of the cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWhat the machine does wrong now — position loss, alarms, overheating, noise\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNew drives do not fix worn ballscrews, racks or bearings\u003c\/li\u003e\n\u003cli\u003eEncoder and feedback mismatches may force motor replacement as well\u003c\/li\u003e\n\u003cli\u003eRetuning on your real parts is part of the job — budget the machine time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eDowntime is quoted apart from parts lead time so the shutdown can be planned around your production rather than around procurement. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eComplete the intake with those details and the quotation is issued against your parts and your site. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482545082734,"sku":"UM-COMP-DELTA-015","price":3900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/delta-plc-hmi-servo-drive-retrofit-service_9748782c-26d7-43c3-9d42-dac4f74708ac.png?v=1786025910"},{"product_id":"mitsubishi-electric-plc-servo-retrofit-for-cnc-machines","title":"Mitsubishi Electric PLC \u0026 Servo Retrofit for CNC Machines","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent retrofit and upgrade work on the Mitsubishi Electric PLC, HMI and electrical package of a CNC machine in U.S. shops.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePLC, HMI, servo amplifier and motor assessment\u003c\/li\u003e\n\u003cli\u003eObsolete hardware replacement and migration planning\u003c\/li\u003e\n\u003cli\u003eProgram, parameter and communication transfer\u003c\/li\u003e\n\u003cli\u003eEncoder, fieldbus and safety-system integration\u003c\/li\u003e\n\u003cli\u003eStartup testing and machine-function verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines running a PLC or HMI platform that is no longer supported\u003c\/li\u003e\n\u003cli\u003eOwners without program source or wiring documentation for a critical machine\u003c\/li\u003e\n\u003cli\u003ePlants standardizing control platforms and spare-part stock across a line\u003c\/li\u003e\n\u003cli\u003eShops adding safety functions that the existing control cannot carry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstalled platform\u003c\/th\u003e\n\u003ctd\u003ePLC and HMI brand, model, firmware and program availability\u003c\/td\u003e\n\u003ctd\u003eWhether the existing program can be migrated or must be rewritten\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProgram and documentation\u003c\/th\u003e\n\u003ctd\u003eSource program, I\/O list and wiring diagrams\u003c\/td\u003e\n\u003ctd\u003eWithout documentation the job becomes reverse engineering, which is billed differently\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O count and cabinet space\u003c\/th\u003e\n\u003ctd\u003ePhysical I\/O, spare capacity and cabinet layout\u003c\/td\u003e\n\u003ctd\u003eCabinet space and heat load are the practical limits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrives and motors\u003c\/th\u003e\n\u003ctd\u003eDrive brand, model and communication protocol\u003c\/td\u003e\n\u003ctd\u003eProtocol mismatch between control and drives is a common blocker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and safety relays\u003c\/td\u003e\n\u003ctd\u003eAny control change re-opens the guarding assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eEach major assembly on a cnc machine is selected at configuration. The shortlist below is what the build is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eMitsubishi Electric\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVFD and inverter options\u003c\/th\u003e\n\u003ctd\u003eDelta \/ Yaskawa \/ ABB \/ Schneider Electric\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive options\u003c\/th\u003e\n\u003ctd\u003eEstun \/ Yaskawa \/ Delta \/ Siemens\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety light curtain and interlock options\u003c\/th\u003e\n\u003ctd\u003eSICK \/ Pilz \/ Keyence \/ Banner\u003c\/td\u003e\n\u003ctd\u003eGuarding scope by risk assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eIdentify the unit before anything else — the following is what the assessment works from:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent PLC and HMI brand, model and firmware version\u003c\/li\u003e\n\u003cli\u003ePhotos of the control cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams, I\/O lists and any PLC program backup\u003c\/li\u003e\n\u003cli\u003eA description of the faults or limitations you are trying to solve\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMissing program source can turn a migration into a full rewrite\u003c\/li\u003e\n\u003cli\u003eObsolete field devices may need replacing alongside the control\u003c\/li\u003e\n\u003cli\u003eMachine safety validation after the retrofit is the owner's responsibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eThe schedule follows parts, not the order date: lead time and shutdown window appear as two separate lines on the quotation. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eWith that information the quotation covers configuration, freight and installation scope in one written response. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482546360686,"sku":"UM-COMP-MEL-014","price":3900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/mitsubishi-electric-plc-servo-retrofit-cnc_5b582636-33dc-42dc-b6f4-f9689194f19e.png?v=1786025912"},{"product_id":"yaskawa-servo-motor-drive-retrofit-for-cnc-machines","title":"Yaskawa Servo Motor \u0026 Drive Retrofit for CNC Machines","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eYaskawa Servo Motor \u0026amp; Drive Retrofit for CNC Machines — independent retrofit and upgrade work carried out on the Yaskawa servo and drive package of a CNC machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eServo motor, drive and encoder compatibility review\u003c\/li\u003e\n\u003cli\u003eObsolete amplifier and motor replacement planning\u003c\/li\u003e\n\u003cli\u003eController, fieldbus and feedback integration\u003c\/li\u003e\n\u003cli\u003eParameter migration, axis tuning and homing setup\u003c\/li\u003e\n\u003cli\u003eStartup testing and machine-motion verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines losing position, alarming on the drives or running hot under duty\u003c\/li\u003e\n\u003cli\u003eOwners whose motor or drive generation is no longer obtainable\u003c\/li\u003e\n\u003cli\u003eShops raising acceleration or duty cycle on existing motion hardware\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with mixed-generation drive packages\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMotor and drive package\u003c\/th\u003e\n\u003ctd\u003eBrand, model, frame size, feedback type and cabling\u003c\/td\u003e\n\u003ctd\u003eFeedback type decides whether motors can be reused\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical coupling\u003c\/th\u003e\n\u003ctd\u003eGearbox ratio, coupling, belt or direct mount\u003c\/td\u003e\n\u003ctd\u003eA drive swap that ignores the mechanics gives you tuned vibration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl interface\u003c\/th\u003e\n\u003ctd\u003ePulse, analog or bus protocol between control and drive\u003c\/td\u003e\n\u003ctd\u003eProtocol compatibility is the first thing that either works or does not\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLoad and duty\u003c\/th\u003e\n\u003ctd\u003eAxis mass, acceleration, duty cycle and thermal load\u003c\/td\u003e\n\u003ctd\u003eSizing on real duty avoids the classic undersized retrofit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCabinet and power\u003c\/th\u003e\n\u003ctd\u003eCabinet space, cooling, incoming supply and braking resistors\u003c\/td\u003e\n\u003ctd\u003eRegenerative loads and heat are usually underestimated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eThe assemblies below are specified while the cnc machine is configured; the shortlist shows the options available for each.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive options\u003c\/th\u003e\n\u003ctd\u003eYaskawa\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo motor and drive options\u003c\/th\u003e\n\u003ctd\u003eYaskawa \/ Delta \/ Fuji \/ Panasonic\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVFD and inverter options\u003c\/th\u003e\n\u003ctd\u003eDelta \/ Yaskawa \/ ABB \/ Schneider Electric\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLinear scale and position-feedback options\u003c\/th\u003e\n\u003ctd\u003eHeidenhain \/ Givi Misure \/ Magnescale\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eNothing is quoted before the affected assembly is identified. Send the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eMotor and drive nameplate photos for each affected axis\u003c\/li\u003e\n\u003cli\u003eControl brand, model and the interface it uses to the drives\u003c\/li\u003e\n\u003cli\u003ePhotos of the cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWhat the machine does wrong now — position loss, alarms, overheating, noise\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNew drives do not fix worn ballscrews, racks or bearings\u003c\/li\u003e\n\u003cli\u003eEncoder and feedback mismatches may force motor replacement as well\u003c\/li\u003e\n\u003cli\u003eRetuning on your real parts is part of the job — budget the machine time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eTwo figures are quoted: how long the parts take, and how long the machine is out of production. The shutdown is booked once parts are on hand. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSubmit the intake form with those details and the quotation is prepared against your application rather than a generic specification. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482547179886,"sku":"UM-COMP-YASK-013","price":3900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/fiber-laser-servo-motor-drive-upgrade-white-v1_f614b6c0-ce60-4718-bad7-642c4f41a10c.png?v=1786025915"},{"product_id":"fanuc-cnc-servo-control-retrofit-assessment","title":"FANUC CNC, Servo \u0026 Control Retrofit Assessment","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the FANUC PLC, HMI and electrical package on a CNC machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCNC, servo amplifier, motor and encoder condition review\u003c\/li\u003e\n\u003cli\u003eObsolete-component and replacement-path analysis\u003c\/li\u003e\n\u003cli\u003eProgram, parameter and communication backup review\u003c\/li\u003e\n\u003cli\u003eElectrical, fieldbus and machine-interface evaluation\u003c\/li\u003e\n\u003cli\u003eRecommended repair or retrofit roadmap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines running a PLC or HMI platform that is no longer supported\u003c\/li\u003e\n\u003cli\u003eOwners without program source or wiring documentation for a critical machine\u003c\/li\u003e\n\u003cli\u003ePlants standardizing control platforms and spare-part stock across a line\u003c\/li\u003e\n\u003cli\u003eShops adding safety functions that the existing control cannot carry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstalled platform\u003c\/th\u003e\n\u003ctd\u003ePLC and HMI brand, model, firmware and program availability\u003c\/td\u003e\n\u003ctd\u003eWhether the existing program can be migrated or must be rewritten\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProgram and documentation\u003c\/th\u003e\n\u003ctd\u003eSource program, I\/O list and wiring diagrams\u003c\/td\u003e\n\u003ctd\u003eWithout documentation the job becomes reverse engineering, which is billed differently\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O count and cabinet space\u003c\/th\u003e\n\u003ctd\u003ePhysical I\/O, spare capacity and cabinet layout\u003c\/td\u003e\n\u003ctd\u003eCabinet space and heat load are the practical limits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrives and motors\u003c\/th\u003e\n\u003ctd\u003eDrive brand, model and communication protocol\u003c\/td\u003e\n\u003ctd\u003eProtocol mismatch between control and drives is a common blocker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and safety relays\u003c\/td\u003e\n\u003ctd\u003eAny control change re-opens the guarding assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eA cnc machine is specified per assembly rather than from one fixed part number. The options below are the shortlist this configuration is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eFANUC\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVFD and inverter options\u003c\/th\u003e\n\u003ctd\u003eDelta \/ Yaskawa \/ ABB \/ Schneider Electric\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive options\u003c\/th\u003e\n\u003ctd\u003eEstun \/ Yaskawa \/ Delta \/ Siemens\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety light curtain and interlock options\u003c\/th\u003e\n\u003ctd\u003eSICK \/ Pilz \/ Keyence \/ Banner\u003c\/td\u003e\n\u003ctd\u003eGuarding scope by risk assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe assessment starts from your data, not from a model number:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent PLC and HMI brand, model and firmware version\u003c\/li\u003e\n\u003cli\u003ePhotos of the control cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams, I\/O lists and any PLC program backup\u003c\/li\u003e\n\u003cli\u003eA description of the faults or limitations you are trying to solve\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMissing program source can turn a migration into a full rewrite\u003c\/li\u003e\n\u003cli\u003eObsolete field devices may need replacing alongside the control\u003c\/li\u003e\n\u003cli\u003eMachine safety validation after the retrofit is the owner's responsibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eParts availability drives the schedule. The shutdown window is agreed separately and only after the components are confirmed in stock. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSend those details through the intake form and the written quotation follows against your application. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482547605870,"sku":"UM-COMP-FANUC-012","price":750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/fanuc-cnc-servo-control-retrofit-assessment_28a975d7-7db0-4d68-89b8-9db60f53ff35.png?v=1786025917"},{"product_id":"siemens-plc-cnc-servo-drive-retrofit-service","title":"Siemens PLC, CNC \u0026 Servo Drive Retrofit Service","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eSiemens PLC, CNC \u0026amp; Servo Drive Retrofit Service — independent retrofit and upgrade work carried out on the Siemens servo and drive package of a CNC machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePLC, HMI, CNC and drive hardware assessment\u003c\/li\u003e\n\u003cli\u003eObsolete-component replacement and supported-platform migration\u003c\/li\u003e\n\u003cli\u003eProgram, parameter and communication transfer\u003c\/li\u003e\n\u003cli\u003eMotor, encoder, fieldbus and safety-system integration\u003c\/li\u003e\n\u003cli\u003eStartup testing and machine-function verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines losing position, alarming on the drives or running hot under duty\u003c\/li\u003e\n\u003cli\u003eOwners whose motor or drive generation is no longer obtainable\u003c\/li\u003e\n\u003cli\u003eShops raising acceleration or duty cycle on existing motion hardware\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with mixed-generation drive packages\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMotor and drive package\u003c\/th\u003e\n\u003ctd\u003eBrand, model, frame size, feedback type and cabling\u003c\/td\u003e\n\u003ctd\u003eFeedback type decides whether motors can be reused\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical coupling\u003c\/th\u003e\n\u003ctd\u003eGearbox ratio, coupling, belt or direct mount\u003c\/td\u003e\n\u003ctd\u003eA drive swap that ignores the mechanics gives you tuned vibration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl interface\u003c\/th\u003e\n\u003ctd\u003ePulse, analog or bus protocol between control and drive\u003c\/td\u003e\n\u003ctd\u003eProtocol compatibility is the first thing that either works or does not\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLoad and duty\u003c\/th\u003e\n\u003ctd\u003eAxis mass, acceleration, duty cycle and thermal load\u003c\/td\u003e\n\u003ctd\u003eSizing on real duty avoids the classic undersized retrofit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCabinet and power\u003c\/th\u003e\n\u003ctd\u003eCabinet space, cooling, incoming supply and braking resistors\u003c\/td\u003e\n\u003ctd\u003eRegenerative loads and heat are usually underestimated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eThe assemblies below are specified while the cnc machine is configured; the shortlist shows the options available for each.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive options\u003c\/th\u003e\n\u003ctd\u003eSiemens\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo motor and drive options\u003c\/th\u003e\n\u003ctd\u003eYaskawa \/ Delta \/ Fuji \/ Panasonic\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVFD and inverter options\u003c\/th\u003e\n\u003ctd\u003eDelta \/ Yaskawa \/ ABB \/ Schneider Electric\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLinear scale and position-feedback options\u003c\/th\u003e\n\u003ctd\u003eHeidenhain \/ Givi Misure \/ Magnescale\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eNothing is quoted before the affected assembly is identified. Send the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eMotor and drive nameplate photos for each affected axis\u003c\/li\u003e\n\u003cli\u003eControl brand, model and the interface it uses to the drives\u003c\/li\u003e\n\u003cli\u003ePhotos of the cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWhat the machine does wrong now — position loss, alarms, overheating, noise\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNew drives do not fix worn ballscrews, racks or bearings\u003c\/li\u003e\n\u003cli\u003eEncoder and feedback mismatches may force motor replacement as well\u003c\/li\u003e\n\u003cli\u003eRetuning on your real parts is part of the job — budget the machine time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eDowntime is quoted apart from parts lead time so the shutdown can be planned around your production rather than around procurement. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eComplete the intake with those details and the quotation is issued against your parts and your site. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482548687214,"sku":"UM-COMP-SIEM-011","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/cnc-control-panel-rebuild-modernization-white-v1_0c4d9fcb-936a-4c75-9a32-eb98ac93e04a.png?v=1786025919"},{"product_id":"beckhoff-plc-motion-control-retrofit-for-cnc-machines","title":"Beckhoff PLC \u0026 Motion Control Retrofit for CNC Machines","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eBeckhoff PLC \u0026amp; Motion Control Retrofit for CNC Machines — independent retrofit and upgrade work carried out on the Beckhoff PLC, HMI and electrical package of a CNC machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePLC, industrial PC and I\/O hardware assessment\u003c\/li\u003e\n\u003cli\u003eMotion-control, servo and fieldbus integration\u003c\/li\u003e\n\u003cli\u003eProgram, parameter and communication migration\u003c\/li\u003e\n\u003cli\u003eElectrical cabinet and network modernization\u003c\/li\u003e\n\u003cli\u003eStartup testing and machine-function verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines running a PLC or HMI platform that is no longer supported\u003c\/li\u003e\n\u003cli\u003eOwners without program source or wiring documentation for a critical machine\u003c\/li\u003e\n\u003cli\u003ePlants standardizing control platforms and spare-part stock across a line\u003c\/li\u003e\n\u003cli\u003eShops adding safety functions that the existing control cannot carry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstalled platform\u003c\/th\u003e\n\u003ctd\u003ePLC and HMI brand, model, firmware and program availability\u003c\/td\u003e\n\u003ctd\u003eWhether the existing program can be migrated or must be rewritten\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProgram and documentation\u003c\/th\u003e\n\u003ctd\u003eSource program, I\/O list and wiring diagrams\u003c\/td\u003e\n\u003ctd\u003eWithout documentation the job becomes reverse engineering, which is billed differently\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O count and cabinet space\u003c\/th\u003e\n\u003ctd\u003ePhysical I\/O, spare capacity and cabinet layout\u003c\/td\u003e\n\u003ctd\u003eCabinet space and heat load are the practical limits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrives and motors\u003c\/th\u003e\n\u003ctd\u003eDrive brand, model and communication protocol\u003c\/td\u003e\n\u003ctd\u003eProtocol mismatch between control and drives is a common blocker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and safety relays\u003c\/td\u003e\n\u003ctd\u003eAny control change re-opens the guarding assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eThe assemblies below are specified while the cnc machine is configured; the shortlist shows the options available for each.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eBeckhoff\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVFD and inverter options\u003c\/th\u003e\n\u003ctd\u003eDelta \/ Yaskawa \/ ABB \/ Schneider Electric\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive options\u003c\/th\u003e\n\u003ctd\u003eEstun \/ Yaskawa \/ Delta \/ Siemens\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety light curtain and interlock options\u003c\/th\u003e\n\u003ctd\u003eSICK \/ Pilz \/ Keyence \/ Banner\u003c\/td\u003e\n\u003ctd\u003eGuarding scope by risk assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eNothing is quoted before the affected assembly is identified. Send the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent PLC and HMI brand, model and firmware version\u003c\/li\u003e\n\u003cli\u003ePhotos of the control cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams, I\/O lists and any PLC program backup\u003c\/li\u003e\n\u003cli\u003eA description of the faults or limitations you are trying to solve\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMissing program source can turn a migration into a full rewrite\u003c\/li\u003e\n\u003cli\u003eObsolete field devices may need replacing alongside the control\u003c\/li\u003e\n\u003cli\u003eMachine safety validation after the retrofit is the owner's responsibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eTwo figures are quoted: how long the parts take, and how long the machine is out of production. The shutdown is booked once parts are on hand. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSubmit the intake form with those details and the quotation is prepared against your application rather than a generic specification. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482549113198,"sku":"UM-COMP-BECK-010","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/beckhoff-plc-motion-control-retrofit-cnc_08199a3a-58de-4e49-8447-0d0b88e01cf7.png?v=1786025922"},{"product_id":"raycus-fiber-laser-source-replacement-retrofit","title":"Raycus Fiber Laser Source Replacement \u0026 Retrofit","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eRaycus Fiber Laser Source Replacement \u0026amp; Retrofit — independent retrofit and upgrade work carried out on the Raycus laser source of a fiber laser cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLaser-source model, power and interface compatibility review\u003c\/li\u003e\n\u003cli\u003eElectrical, cooling, communication and fiber-delivery checks\u003c\/li\u003e\n\u003cli\u003eSource installation and CNC integration\u003c\/li\u003e\n\u003cli\u003eCutting-head and chiller compatibility verification\u003c\/li\u003e\n\u003cli\u003eParameter setup, startup and test cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines whose motion, frame and control are sound but whose source has degraded\u003c\/li\u003e\n\u003cli\u003eOwners quoted a full machine replacement because the source is at end of life\u003c\/li\u003e\n\u003cli\u003eShops moving to a higher power class where the rest of the machine can carry it\u003c\/li\u003e\n\u003cli\u003eBuyers of used fiber lasers with an unknown or unsupported source\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSource model, serial and hours\u003c\/th\u003e\n\u003ctd\u003eNameplate, run hours, alarm history and prior repairs\u003c\/td\u003e\n\u003ctd\u003eDecides whether a rebuild, a like-for-like swap or a power upgrade is realistic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDelivery fiber and connector type\u003c\/th\u003e\n\u003ctd\u003eQBH\/QD connector, fiber length and routing\u003c\/td\u003e\n\u003ctd\u003eA mismatched connector changes the head and the cost of the job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling capacity\u003c\/th\u003e\n\u003ctd\u003eChiller kW, flow, water quality and hose runs\u003c\/td\u003e\n\u003ctd\u003eA higher-power source will not run on the old chiller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical service\u003c\/th\u003e\n\u003ctd\u003eVoltage, phase, amperage and cabinet space at the machine\u003c\/td\u003e\n\u003ctd\u003ePower upgrades are the most frequently under-budgeted item\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl and software\u003c\/th\u003e\n\u003ctd\u003eCNC version, parameter backup and license status\u003c\/td\u003e\n\u003ctd\u003eThe control has to talk to the new source before anything cuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eEach major assembly on a fiber laser cutting machine is selected at configuration. The shortlist below is what the build is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser source\u003c\/th\u003e\n\u003ctd\u003eRaycus\u003c\/td\u003e\n\u003ctd\u003eIdentified from the nameplate before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChiller and cooling circuit\u003c\/th\u003e\n\u003ctd\u003eS\u0026amp;A (Teyu) \/ Hanli \/ Tongfei\u003c\/td\u003e\n\u003ctd\u003eMatched to the source\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and communication interfaces\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003eConfirmed on the machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eNothing is quoted before the affected assembly is identified. Send the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eLaser source brand, model, serial number and nameplate photo\u003c\/li\u003e\n\u003cli\u003ePhotos of the control cabinet with the door open, and of the fiber connector at the head\u003c\/li\u003e\n\u003cli\u003eAlarm codes and a short description of what the machine does now\u003c\/li\u003e\n\u003cli\u003eChiller make, model and capacity\u003c\/li\u003e\n\u003cli\u003eIncoming voltage, phase and available amperage at the machine\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFiber damage inside the source, contaminated end caps or prior unauthorized repairs can make a rebuild uneconomic\u003c\/li\u003e\n\u003cli\u003eA higher-power source does not raise cut capacity on its own — head, nozzle, gas, cooling and motion all have to carry the increase\u003c\/li\u003e\n\u003cli\u003eDiscontinued source models may have no parts route at any price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eThe schedule follows parts, not the order date: lead time and shutdown window appear as two separate lines on the quotation. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eWith that information the quotation covers configuration, freight and installation scope in one written response. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482550227310,"sku":"UM-COMP-RAYC-009","price":9900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/fiber-laser-source-replacement-power-upgrade-white-v1_ce36fbf3-3673-43ee-809f-2b46230b558f.png?v=1786025926"},{"product_id":"max-fiber-laser-source-replacement-power-upgrade","title":"MAX Fiber Laser Source Replacement \u0026 Power Upgrade","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the MAX laser source on a fiber laser cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLaser-source model, power and interface compatibility review\u003c\/li\u003e\n\u003cli\u003eElectrical, cooling and communication-system checks\u003c\/li\u003e\n\u003cli\u003eSource installation and controller integration\u003c\/li\u003e\n\u003cli\u003eCutting-head, chiller and fiber-connector verification\u003c\/li\u003e\n\u003cli\u003eParameter setup, startup and test cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines whose motion, frame and control are sound but whose source has degraded\u003c\/li\u003e\n\u003cli\u003eOwners quoted a full machine replacement because the source is at end of life\u003c\/li\u003e\n\u003cli\u003eShops moving to a higher power class where the rest of the machine can carry it\u003c\/li\u003e\n\u003cli\u003eBuyers of used fiber lasers with an unknown or unsupported source\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSource model, serial and hours\u003c\/th\u003e\n\u003ctd\u003eNameplate, run hours, alarm history and prior repairs\u003c\/td\u003e\n\u003ctd\u003eDecides whether a rebuild, a like-for-like swap or a power upgrade is realistic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDelivery fiber and connector type\u003c\/th\u003e\n\u003ctd\u003eQBH\/QD connector, fiber length and routing\u003c\/td\u003e\n\u003ctd\u003eA mismatched connector changes the head and the cost of the job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling capacity\u003c\/th\u003e\n\u003ctd\u003eChiller kW, flow, water quality and hose runs\u003c\/td\u003e\n\u003ctd\u003eA higher-power source will not run on the old chiller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical service\u003c\/th\u003e\n\u003ctd\u003eVoltage, phase, amperage and cabinet space at the machine\u003c\/td\u003e\n\u003ctd\u003ePower upgrades are the most frequently under-budgeted item\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl and software\u003c\/th\u003e\n\u003ctd\u003eCNC version, parameter backup and license status\u003c\/td\u003e\n\u003ctd\u003eThe control has to talk to the new source before anything cuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eA fiber laser cutting machine is specified per assembly rather than from one fixed part number. The options below are the shortlist this configuration is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser source\u003c\/th\u003e\n\u003ctd\u003eMAX\u003c\/td\u003e\n\u003ctd\u003eIdentified from the nameplate before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChiller and cooling circuit\u003c\/th\u003e\n\u003ctd\u003eS\u0026amp;A (Teyu) \/ Hanli \/ Tongfei\u003c\/td\u003e\n\u003ctd\u003eMatched to the source\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and communication interfaces\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003eConfirmed on the machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe assessment starts from your data, not from a model number:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eLaser source brand, model, serial number and nameplate photo\u003c\/li\u003e\n\u003cli\u003ePhotos of the control cabinet with the door open, and of the fiber connector at the head\u003c\/li\u003e\n\u003cli\u003eAlarm codes and a short description of what the machine does now\u003c\/li\u003e\n\u003cli\u003eChiller make, model and capacity\u003c\/li\u003e\n\u003cli\u003eIncoming voltage, phase and available amperage at the machine\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFiber damage inside the source, contaminated end caps or prior unauthorized repairs can make a rebuild uneconomic\u003c\/li\u003e\n\u003cli\u003eA higher-power source does not raise cut capacity on its own — head, nozzle, gas, cooling and motion all have to carry the increase\u003c\/li\u003e\n\u003cli\u003eDiscontinued source models may have no parts route at any price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eParts availability drives the schedule. The shutdown window is agreed separately and only after the components are confirmed in stock. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSend those details through the intake form and the written quotation follows against your application. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482550653294,"sku":"UM-COMP-MAX-008","price":9900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/max-fiber-laser-source-replacement-power-upgrade_87b9b8f4-1a5c-482c-97c0-e755200fdcc3.png?v=1786025926"},{"product_id":"ipg-fiber-laser-source-replacement-system-integration","title":"IPG Fiber Laser Source Replacement \u0026 System Integration","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIPG Fiber Laser Source Replacement \u0026amp; System Integration — independent retrofit and upgrade work carried out on the IPG laser source of a fiber laser cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLaser-source model, power and interface compatibility review\u003c\/li\u003e\n\u003cli\u003eElectrical, cooling, fiber-delivery and communication checks\u003c\/li\u003e\n\u003cli\u003eSource installation and controller integration\u003c\/li\u003e\n\u003cli\u003eCutting-head and chiller compatibility verification\u003c\/li\u003e\n\u003cli\u003eParameter setup, startup and test cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines whose motion, frame and control are sound but whose source has degraded\u003c\/li\u003e\n\u003cli\u003eOwners quoted a full machine replacement because the source is at end of life\u003c\/li\u003e\n\u003cli\u003eShops moving to a higher power class where the rest of the machine can carry it\u003c\/li\u003e\n\u003cli\u003eBuyers of used fiber lasers with an unknown or unsupported source\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSource model, serial and hours\u003c\/th\u003e\n\u003ctd\u003eNameplate, run hours, alarm history and prior repairs\u003c\/td\u003e\n\u003ctd\u003eDecides whether a rebuild, a like-for-like swap or a power upgrade is realistic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDelivery fiber and connector type\u003c\/th\u003e\n\u003ctd\u003eQBH\/QD connector, fiber length and routing\u003c\/td\u003e\n\u003ctd\u003eA mismatched connector changes the head and the cost of the job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling capacity\u003c\/th\u003e\n\u003ctd\u003eChiller kW, flow, water quality and hose runs\u003c\/td\u003e\n\u003ctd\u003eA higher-power source will not run on the old chiller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical service\u003c\/th\u003e\n\u003ctd\u003eVoltage, phase, amperage and cabinet space at the machine\u003c\/td\u003e\n\u003ctd\u003ePower upgrades are the most frequently under-budgeted item\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl and software\u003c\/th\u003e\n\u003ctd\u003eCNC version, parameter backup and license status\u003c\/td\u003e\n\u003ctd\u003eThe control has to talk to the new source before anything cuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eComponent selection on a fiber laser cutting machine is part of the configuration, not a fixed bill of materials. These are the assemblies and the options each is chosen from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser source\u003c\/th\u003e\n\u003ctd\u003eIPG\u003c\/td\u003e\n\u003ctd\u003eIdentified from the nameplate before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChiller and cooling circuit\u003c\/th\u003e\n\u003ctd\u003eS\u0026amp;A (Teyu) \/ Hanli \/ Tongfei\u003c\/td\u003e\n\u003ctd\u003eMatched to the source\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and communication interfaces\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003eConfirmed on the machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eSend this set and the first-round questions are already answered:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eLaser source brand, model, serial number and nameplate photo\u003c\/li\u003e\n\u003cli\u003ePhotos of the control cabinet with the door open, and of the fiber connector at the head\u003c\/li\u003e\n\u003cli\u003eAlarm codes and a short description of what the machine does now\u003c\/li\u003e\n\u003cli\u003eChiller make, model and capacity\u003c\/li\u003e\n\u003cli\u003eIncoming voltage, phase and available amperage at the machine\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFiber damage inside the source, contaminated end caps or prior unauthorized repairs can make a rebuild uneconomic\u003c\/li\u003e\n\u003cli\u003eA higher-power source does not raise cut capacity on its own — head, nozzle, gas, cooling and motion all have to carry the increase\u003c\/li\u003e\n\u003cli\u003eDiscontinued source models may have no parts route at any price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eComponent lead time is confirmed in writing before the machine is released from production, and the shutdown is scheduled against it. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eProvide those details and the response states configuration, freight, unloading and startup scope in writing. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482552127854,"sku":"UM-COMP-IPG-007","price":9900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/ipg-fiber-laser-source-replacement-system-integration-white-v1_a278b4bc-531b-4d64-be8a-3da6cba4b3c9.png?v=1786025928"},{"product_id":"precitec-laser-cutting-head-retrofit-compatibility-assessment","title":"Precitec Laser Cutting Head Retrofit \u0026 Compatibility Assessment","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003ePrecitec Laser Cutting Head Retrofit \u0026amp; Compatibility Assessment — independent retrofit and upgrade work carried out on the Precitec cutting head of a fiber laser cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCutting-head model, laser-power and fiber-interface review\u003c\/li\u003e\n\u003cli\u003eAutofocus, capacitive sensing and cooling compatibility\u003c\/li\u003e\n\u003cli\u003eController, communication and height-control integration\u003c\/li\u003e\n\u003cli\u003eMechanical mounting and optical-path evaluation\u003c\/li\u003e\n\u003cli\u003eCalibration, parameter setup and test cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines where cut quality is limited by the head rather than by the source\u003c\/li\u003e\n\u003cli\u003eOwners with crash damage who need a compatibility route rather than a new machine\u003c\/li\u003e\n\u003cli\u003eShops standardizing head and consumable stock across several fiber lasers\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with an obsolete or undocumented head\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHead model and mounting\u003c\/th\u003e\n\u003ctd\u003eExisting head brand, model, mount pattern and Z-axis interface\u003c\/td\u003e\n\u003ctd\u003eDecides whether the retrofit is a bolt-on or a bracket and cable job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiber connector\u003c\/th\u003e\n\u003ctd\u003eQBH\/QD type and fiber diameter\u003c\/td\u003e\n\u003ctd\u003eThe head must match the source connector, not just the power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight control\u003c\/th\u003e\n\u003ctd\u003eCapacitive sensor, amplifier and controller compatibility\u003c\/td\u003e\n\u003ctd\u003eHeight control is the single most common retrofit failure point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGas circuit\u003c\/th\u003e\n\u003ctd\u003eAssist-gas pressure range, valves and nozzle standard\u003c\/td\u003e\n\u003ctd\u003eA new head usually means a new nozzle and consumable standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOptics and cooling\u003c\/th\u003e\n\u003ctd\u003eCollimation, focus length, protective window and water cooling\u003c\/td\u003e\n\u003ctd\u003eDetermines what cut range the head can actually deliver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eEach major assembly on a fiber laser cutting machine is selected at configuration. The shortlist below is what the build is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCutting head\u003c\/th\u003e\n\u003ctd\u003ePrecitec\u003c\/td\u003e\n\u003ctd\u003eIdentified from the head nameplate before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOptics and protective windows\u003c\/th\u003e\n\u003ctd\u003ePrecitec-compatible \/ Raytools-compatible \/ WSX-compatible \/ BOCI-compatible\u003c\/td\u003e\n\u003ctd\u003eMatched to the installed head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNozzles and ceramic rings\u003c\/th\u003e\n\u003ctd\u003eMatched nozzle and ceramic-ring standard\u003c\/td\u003e\n\u003ctd\u003eHead-specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight sensing\u003c\/th\u003e\n\u003ctd\u003eCapacitive sensor and amplifier matched to the head\u003c\/td\u003e\n\u003ctd\u003eConfirmed on the machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAssist-gas system\u003c\/th\u003e\n\u003ctd\u003eSMC \/ AirTAC proportional control\u003c\/td\u003e\n\u003ctd\u003eConfirmed on the machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eNothing is quoted before the affected assembly is identified. Send the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent cutting head brand and model, with photos from two angles\u003c\/li\u003e\n\u003cli\u003eLaser source brand, model and power rating\u003c\/li\u003e\n\u003cli\u003eFiber connector type and a photo of the connector at the head\u003c\/li\u003e\n\u003cli\u003eHeight-control brand and controller model\u003c\/li\u003e\n\u003cli\u003ePhotographs of poor cuts, with material and thickness noted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCrash damage often reaches past the head into the Z-axis and drag chain\u003c\/li\u003e\n\u003cli\u003eA head upgrade does not compensate for a worn gantry, loose rack or a failing source\u003c\/li\u003e\n\u003cli\u003eConsumable standards change with the head — budget for a new starter set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eThe schedule follows parts, not the order date: lead time and shutdown window appear as two separate lines on the quotation. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eWith that information the quotation covers configuration, freight and installation scope in one written response. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482552848750,"sku":"UM-COMP-PREC-006","price":750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/precitec-laser-head-retrofit-compatibility-assessment-white-v1_fa459938-5287-4a32-a6df-fb847d930fc0.png?v=1786025933"},{"product_id":"raytools-fiber-laser-cutting-head-replacement-upgrade","title":"Raytools Fiber Laser Cutting Head Replacement \u0026 Upgrade","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent retrofit and upgrade work on the Raytools cutting head of a fiber laser cutting machine in U.S. shops.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCutting-head model and laser-power compatibility review\u003c\/li\u003e\n\u003cli\u003eAutofocus, capacitive sensing and cooling integration\u003c\/li\u003e\n\u003cli\u003eFiber connector, cable and controller-interface checks\u003c\/li\u003e\n\u003cli\u003eOptical alignment, calibration and parameter setup\u003c\/li\u003e\n\u003cli\u003eTest cutting with representative materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines where cut quality is limited by the head rather than by the source\u003c\/li\u003e\n\u003cli\u003eOwners with crash damage who need a compatibility route rather than a new machine\u003c\/li\u003e\n\u003cli\u003eShops standardizing head and consumable stock across several fiber lasers\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with an obsolete or undocumented head\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHead model and mounting\u003c\/th\u003e\n\u003ctd\u003eExisting head brand, model, mount pattern and Z-axis interface\u003c\/td\u003e\n\u003ctd\u003eDecides whether the retrofit is a bolt-on or a bracket and cable job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiber connector\u003c\/th\u003e\n\u003ctd\u003eQBH\/QD type and fiber diameter\u003c\/td\u003e\n\u003ctd\u003eThe head must match the source connector, not just the power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight control\u003c\/th\u003e\n\u003ctd\u003eCapacitive sensor, amplifier and controller compatibility\u003c\/td\u003e\n\u003ctd\u003eHeight control is the single most common retrofit failure point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGas circuit\u003c\/th\u003e\n\u003ctd\u003eAssist-gas pressure range, valves and nozzle standard\u003c\/td\u003e\n\u003ctd\u003eA new head usually means a new nozzle and consumable standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOptics and cooling\u003c\/th\u003e\n\u003ctd\u003eCollimation, focus length, protective window and water cooling\u003c\/td\u003e\n\u003ctd\u003eDetermines what cut range the head can actually deliver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eComponent selection on a fiber laser cutting machine is part of the configuration, not a fixed bill of materials. These are the assemblies and the options each is chosen from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCutting head\u003c\/th\u003e\n\u003ctd\u003eRaytools\u003c\/td\u003e\n\u003ctd\u003eIdentified from the head nameplate before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOptics and protective windows\u003c\/th\u003e\n\u003ctd\u003ePrecitec-compatible \/ Raytools-compatible \/ WSX-compatible \/ BOCI-compatible\u003c\/td\u003e\n\u003ctd\u003eMatched to the installed head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNozzles and ceramic rings\u003c\/th\u003e\n\u003ctd\u003eMatched nozzle and ceramic-ring standard\u003c\/td\u003e\n\u003ctd\u003eHead-specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight sensing\u003c\/th\u003e\n\u003ctd\u003eCapacitive sensor and amplifier matched to the head\u003c\/td\u003e\n\u003ctd\u003eConfirmed on the machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAssist-gas system\u003c\/th\u003e\n\u003ctd\u003eSMC \/ AirTAC proportional control\u003c\/td\u003e\n\u003ctd\u003eConfirmed on the machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eComponent identification comes first. Photographs of the nameplate and the open control cabinet answer most first-round questions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent cutting head brand and model, with photos from two angles\u003c\/li\u003e\n\u003cli\u003eLaser source brand, model and power rating\u003c\/li\u003e\n\u003cli\u003eFiber connector type and a photo of the connector at the head\u003c\/li\u003e\n\u003cli\u003eHeight-control brand and controller model\u003c\/li\u003e\n\u003cli\u003ePhotographs of poor cuts, with material and thickness noted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCrash damage often reaches past the head into the Z-axis and drag chain\u003c\/li\u003e\n\u003cli\u003eA head upgrade does not compensate for a worn gantry, loose rack or a failing source\u003c\/li\u003e\n\u003cli\u003eConsumable standards change with the head — budget for a new starter set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eLead time and downtime are quoted separately; the shutdown is scheduled around parts availability rather than around the order date. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eOnce those are confirmed, the quotation states the configuration, freight and installation scope in writing. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482555437422,"sku":"UM-COMP-RAYT-005","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/fiber-laser-cutting-head-replacement-upgrade-white-v1_6a69ea00-ab42-46a0-8ee2-4e305aed33b8.png?v=1786025939"},{"product_id":"cypcut-software-migration-backup-parameter-recovery","title":"CypCut Software Migration, Backup \u0026 Parameter Recovery","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent retrofit and upgrade work on the CypCut software and parameter set of a CNC cutting machine in U.S. shops.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCypCut configuration and machine-parameter backup\u003c\/li\u003e\n\u003cli\u003eSoftware migration to a replacement industrial computer\u003c\/li\u003e\n\u003cli\u003eController, height-control, servo and gas-setting restoration\u003c\/li\u003e\n\u003cli\u003eCutting database and nesting-workflow transfer\u003c\/li\u003e\n\u003cli\u003eFunctional checks and test cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShops whose nesting or control software is no longer supported on current hardware\u003c\/li\u003e\n\u003cli\u003eOwners who need parameters, recipes and post-processors carried across a migration\u003c\/li\u003e\n\u003cli\u003ePlants standardizing CAM output and machine profiles across several machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with an unclear software license position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstalled version and license\u003c\/th\u003e\n\u003ctd\u003eSoftware build, dongle or license state and ownership\u003c\/td\u003e\n\u003ctd\u003eLicense transfer is the first thing that either works or blocks the whole job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParameter and recipe backup\u003c\/th\u003e\n\u003ctd\u003eWhat backups exist, and where\u003c\/td\u003e\n\u003ctd\u003eWithout a backup the cutting recipes are rebuilt from scratch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePost-processor and machine profile\u003c\/th\u003e\n\u003ctd\u003eMachine profile, post and kerf tables\u003c\/td\u003e\n\u003ctd\u003eThe post is what makes the software output usable on your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHardware compatibility\u003c\/th\u003e\n\u003ctd\u003eControl PC, card, OS and CNC platform\u003c\/td\u003e\n\u003ctd\u003eOlder control cards frequently block a straight software upgrade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperator workflow\u003c\/th\u003e\n\u003ctd\u003eNesting, import formats, ERP hand-off and reporting\u003c\/td\u003e\n\u003ctd\u003eThe migration is judged on the operator workflow, not the install\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eComponent selection on a cnc cutting machine is part of the configuration, not a fixed bill of materials. These are the assemblies and the options each is chosen from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eCypCut\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube CNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess TubePro \/ Au3tech tube suite\u003c\/td\u003e\n\u003ctd\u003eMatched to tube package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNesting and CAM software options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST \/ Lantek \/ Radan \/ Metalix\u003c\/td\u003e\n\u003ctd\u003eQuote-selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eSiemens \/ Schneider Electric \/ Delta \/ Omron\u003c\/td\u003e\n\u003ctd\u003eConfigured at build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eComponent identification comes first. Photographs of the nameplate and the open control cabinet answer most first-round questions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and CNC platform\u003c\/li\u003e\n\u003cli\u003eCurrent software name, version and license or dongle details\u003c\/li\u003e\n\u003cli\u003eAny parameter, recipe or post-processor backups you hold\u003c\/li\u003e\n\u003cli\u003eScreenshots of the current control and nesting screens\u003c\/li\u003e\n\u003cli\u003eTypical part files and the formats your CAD sends\u003c\/li\u003e\n\u003cli\u003eWhat is failing today, in one paragraph\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLicense transfer is decided by the software vendor, not by UmproTech\u003c\/li\u003e\n\u003cli\u003eCutting recipes may need re-validation on your material after migration\u003c\/li\u003e\n\u003cli\u003eSome legacy control hardware cannot run current software at any price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eLead time and downtime are quoted separately; the shutdown is scheduled around parts availability rather than around the order date. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eOnce those are confirmed, the quotation states the configuration, freight and installation scope in writing. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482555830638,"sku":"UM-COMP-CYPCUT-004","price":950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/cypcut-software-migration-backup-parameter-recovery-white-v1_def18b35-68bf-4a08-8e2e-06d10e5d0cd2.png?v=1786025941"},{"product_id":"esa-press-brake-cnc-control-upgrade-retrofit","title":"ESA Press Brake CNC Control Upgrade \u0026 Retrofit","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the ESA CNC control and backgauge package on a press brake.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eESA control replacement or migration to a supported control platform\u003c\/li\u003e\n\u003cli\u003eBackgauge, Y1\/Y2, crowning and auxiliary-axis integration\u003c\/li\u003e\n\u003cli\u003ePLC, electrical cabinet and communication modernization\u003c\/li\u003e\n\u003cli\u003eParameter recovery, calibration and test bending\u003c\/li\u003e\n\u003cli\u003eOperator startup support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePress brakes that are mechanically sound but limited by an obsolete control\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control or backgauge\u003c\/li\u003e\n\u003cli\u003eShops adding axes, crowning or bend-angle feedback to an existing machine\u003c\/li\u003e\n\u003cli\u003ePlants standardizing brake controls and safety systems across several machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExisting control\u003c\/th\u003e\n\u003ctd\u003eControl brand, model, software version and axis count\u003c\/td\u003e\n\u003ctd\u003eDecides migration path and how much of the cabinet is reused\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAxis configuration\u003c\/th\u003e\n\u003ctd\u003eY1\/Y2, X, R, Z1\/Z2, crowning and any auxiliary axes\u003c\/td\u003e\n\u003ctd\u003eAxis count is a primary cost driver on a brake retrofit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eValve and hydraulic package\u003c\/th\u003e\n\u003ctd\u003eProportional valve brand, model and condition\u003c\/td\u003e\n\u003ctd\u003eA new control on a tired valve produces fast, repeatable but inaccurate bends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition feedback\u003c\/th\u003e\n\u003ctd\u003eLinear scale brand, resolution and mounting condition\u003c\/td\u003e\n\u003ctd\u003eBend-angle repeatability is a feedback problem before it is a control problem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety system\u003c\/th\u003e\n\u003ctd\u003eLight curtain or laser guard, brand, model and validity\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — budget for it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine condition\u003c\/th\u003e\n\u003ctd\u003eRam wear, frame deflection, cylinder condition and oil state\u003c\/td\u003e\n\u003ctd\u003eMechanical condition sets the accuracy ceiling the new control can reach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eEach major assembly on a press brake is selected at configuration. The shortlist below is what the build is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC control\u003c\/th\u003e\n\u003ctd\u003eESA\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed control before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFeedback devices\u003c\/th\u003e\n\u003ctd\u003eHeidenhain \/ Givi Misure \/ Magnescale linear scales\u003c\/td\u003e\n\u003ctd\u003eMatched to axis count and travel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrives and motors\u003c\/th\u003e\n\u003ctd\u003eEstun \/ Yaskawa \/ Delta \/ Siemens\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety interface\u003c\/th\u003e\n\u003ctd\u003eLazer Safe \/ DSP Fiessler \/ SICK \/ Pilz\u003c\/td\u003e\n\u003ctd\u003eScope set by risk assessment and measured stop time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical integration\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe scope is written from these, not from the machine name:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePress brake make, model, year, tonnage and bend length\u003c\/li\u003e\n\u003cli\u003eCurrent CNC control brand and model, with a photo of the screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open, and of the backgauge\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backups you hold\u003c\/li\u003e\n\u003cli\u003eAxis count you have now and axis count you want\u003c\/li\u003e\n\u003cli\u003eCurrent safety device brand and model\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA control retrofit cannot correct a worn ram, a deflecting frame or leaking cylinders\u003c\/li\u003e\n\u003cli\u003eAdding axes may require mechanical backgauge work that is quoted separately\u003c\/li\u003e\n\u003cli\u003eThe guarding assessment after a control change is the machine owner's responsibility under OSHA — plan for it in the budget\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eThe quotation separates parts lead time from the shutdown window, and the machine stays in production until the parts have arrived. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eWith those details the response is a written quotation rather than a price range. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482556518766,"sku":"UM-COMP-ESA-003","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/esa-press-brake-cnc-control-upgrade-retrofit-white-v1_b4e1d75b-4f23-475b-ac6d-f19d2fe4d3a3.png?v=1786025943"},{"product_id":"cybelec-press-brake-cnc-control-replacement-retrofit","title":"Cybelec Press Brake CNC Control Replacement \u0026 Retrofit","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eCybelec Press Brake CNC Control Replacement \u0026amp; Retrofit — independent retrofit and upgrade work carried out on the Cybelec CNC control and backgauge package of a press brake.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eControl replacement or migration to a supported CNC platform\u003c\/li\u003e\n\u003cli\u003eBackgauge, ram-axis and crowning integration\u003c\/li\u003e\n\u003cli\u003eElectrical cabinet, PLC and communication updates\u003c\/li\u003e\n\u003cli\u003eParameter recovery, axis calibration and test bending\u003c\/li\u003e\n\u003cli\u003eOperator startup support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePress brakes that are mechanically sound but limited by an obsolete control\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control or backgauge\u003c\/li\u003e\n\u003cli\u003eShops adding axes, crowning or bend-angle feedback to an existing machine\u003c\/li\u003e\n\u003cli\u003ePlants standardizing brake controls and safety systems across several machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExisting control\u003c\/th\u003e\n\u003ctd\u003eControl brand, model, software version and axis count\u003c\/td\u003e\n\u003ctd\u003eDecides migration path and how much of the cabinet is reused\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAxis configuration\u003c\/th\u003e\n\u003ctd\u003eY1\/Y2, X, R, Z1\/Z2, crowning and any auxiliary axes\u003c\/td\u003e\n\u003ctd\u003eAxis count is a primary cost driver on a brake retrofit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eValve and hydraulic package\u003c\/th\u003e\n\u003ctd\u003eProportional valve brand, model and condition\u003c\/td\u003e\n\u003ctd\u003eA new control on a tired valve produces fast, repeatable but inaccurate bends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition feedback\u003c\/th\u003e\n\u003ctd\u003eLinear scale brand, resolution and mounting condition\u003c\/td\u003e\n\u003ctd\u003eBend-angle repeatability is a feedback problem before it is a control problem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety system\u003c\/th\u003e\n\u003ctd\u003eLight curtain or laser guard, brand, model and validity\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — budget for it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine condition\u003c\/th\u003e\n\u003ctd\u003eRam wear, frame deflection, cylinder condition and oil state\u003c\/td\u003e\n\u003ctd\u003eMechanical condition sets the accuracy ceiling the new control can reach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eA press brake is specified per assembly rather than from one fixed part number. The options below are the shortlist this configuration is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC control\u003c\/th\u003e\n\u003ctd\u003eCybelec\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed control before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFeedback devices\u003c\/th\u003e\n\u003ctd\u003eHeidenhain \/ Givi Misure \/ Magnescale linear scales\u003c\/td\u003e\n\u003ctd\u003eMatched to axis count and travel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrives and motors\u003c\/th\u003e\n\u003ctd\u003eEstun \/ Yaskawa \/ Delta \/ Siemens\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety interface\u003c\/th\u003e\n\u003ctd\u003eLazer Safe \/ DSP Fiessler \/ SICK \/ Pilz\u003c\/td\u003e\n\u003ctd\u003eScope set by risk assessment and measured stop time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical integration\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eSend this set and the first-round questions are already answered:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePress brake make, model, year, tonnage and bend length\u003c\/li\u003e\n\u003cli\u003eCurrent CNC control brand and model, with a photo of the screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open, and of the backgauge\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backups you hold\u003c\/li\u003e\n\u003cli\u003eAxis count you have now and axis count you want\u003c\/li\u003e\n\u003cli\u003eCurrent safety device brand and model\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA control retrofit cannot correct a worn ram, a deflecting frame or leaking cylinders\u003c\/li\u003e\n\u003cli\u003eAdding axes may require mechanical backgauge work that is quoted separately\u003c\/li\u003e\n\u003cli\u003eThe guarding assessment after a control change is the machine owner's responsibility under OSHA — plan for it in the budget\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eParts lead time and the production shutdown window are quoted as separate lines, and the machine is taken out of production only once parts are on hand. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSend the details above and the response is a written quotation covering the equipment, freight, unloading and startup scope. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482556944750,"sku":"UM-COMP-CYB-002","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/cybelec-press-brake-cnc-control-replacement-retrofit-white-v1_2f1f10bf-84af-45e0-9607-d773645f0bab.png?v=1786025947"},{"product_id":"delem-press-brake-cnc-control-retrofit-upgrade","title":"DELEM Press Brake CNC Control Retrofit \u0026 Upgrade","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the DELEM CNC control and backgauge package on a press brake.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDELEM control replacement or migration to a supported platform\u003c\/li\u003e\n\u003cli\u003eBackgauge, Y1\/Y2, crowning and auxiliary-axis integration\u003c\/li\u003e\n\u003cli\u003ePLC, electrical cabinet and communication updates\u003c\/li\u003e\n\u003cli\u003eParameter recovery, calibration and test bending\u003c\/li\u003e\n\u003cli\u003eOperator startup support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePress brakes that are mechanically sound but limited by an obsolete control\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control or backgauge\u003c\/li\u003e\n\u003cli\u003eShops adding axes, crowning or bend-angle feedback to an existing machine\u003c\/li\u003e\n\u003cli\u003ePlants standardizing brake controls and safety systems across several machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExisting control\u003c\/th\u003e\n\u003ctd\u003eControl brand, model, software version and axis count\u003c\/td\u003e\n\u003ctd\u003eDecides migration path and how much of the cabinet is reused\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAxis configuration\u003c\/th\u003e\n\u003ctd\u003eY1\/Y2, X, R, Z1\/Z2, crowning and any auxiliary axes\u003c\/td\u003e\n\u003ctd\u003eAxis count is a primary cost driver on a brake retrofit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eValve and hydraulic package\u003c\/th\u003e\n\u003ctd\u003eProportional valve brand, model and condition\u003c\/td\u003e\n\u003ctd\u003eA new control on a tired valve produces fast, repeatable but inaccurate bends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition feedback\u003c\/th\u003e\n\u003ctd\u003eLinear scale brand, resolution and mounting condition\u003c\/td\u003e\n\u003ctd\u003eBend-angle repeatability is a feedback problem before it is a control problem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety system\u003c\/th\u003e\n\u003ctd\u003eLight curtain or laser guard, brand, model and validity\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — budget for it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine condition\u003c\/th\u003e\n\u003ctd\u003eRam wear, frame deflection, cylinder condition and oil state\u003c\/td\u003e\n\u003ctd\u003eMechanical condition sets the accuracy ceiling the new control can reach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eThe assemblies below are specified while the press brake is configured; the shortlist shows the options available for each.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC control\u003c\/th\u003e\n\u003ctd\u003eDELEM\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed control before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFeedback devices\u003c\/th\u003e\n\u003ctd\u003eHeidenhain \/ Givi Misure \/ Magnescale linear scales\u003c\/td\u003e\n\u003ctd\u003eMatched to axis count and travel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrives and motors\u003c\/th\u003e\n\u003ctd\u003eEstun \/ Yaskawa \/ Delta \/ Siemens\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety interface\u003c\/th\u003e\n\u003ctd\u003eLazer Safe \/ DSP Fiessler \/ SICK \/ Pilz\u003c\/td\u003e\n\u003ctd\u003eScope set by risk assessment and measured stop time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical integration\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe scope is written from these, not from the machine name:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePress brake make, model, year, tonnage and bend length\u003c\/li\u003e\n\u003cli\u003eCurrent CNC control brand and model, with a photo of the screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open, and of the backgauge\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backups you hold\u003c\/li\u003e\n\u003cli\u003eAxis count you have now and axis count you want\u003c\/li\u003e\n\u003cli\u003eCurrent safety device brand and model\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA control retrofit cannot correct a worn ram, a deflecting frame or leaking cylinders\u003c\/li\u003e\n\u003cli\u003eAdding axes may require mechanical backgauge work that is quoted separately\u003c\/li\u003e\n\u003cli\u003eThe guarding assessment after a control change is the machine owner's responsibility under OSHA — plan for it in the budget\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eTwo figures are quoted: how long the parts take, and how long the machine is out of production. The shutdown is booked once parts are on hand. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSubmit the intake form with those details and the quotation is prepared against your application rather than a generic specification. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482557862254,"sku":"UM-COMP-DELEM-001","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/delem-press-brake-cnc-control-retrofit-upgrade-white-v1_95d470d4-a70f-4f03-85e6-934d7e603deb.png?v=1786025949"},{"product_id":"bodor-fiber-laser-retrofit-upgrade-service","title":"Bodor Fiber Laser Retrofit \u0026 Upgrade Service","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent retrofit and upgrade work on the Bodor control and motion package of a fiber laser cutting machine in U.S. shops.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCNC controller and cutting-software modernization\u003c\/li\u003e\n\u003cli\u003eFiber laser source, autofocus cutting head and chiller replacement\u003c\/li\u003e\n\u003cli\u003eServo drive, height control and assist-gas upgrades\u003c\/li\u003e\n\u003cli\u003eElectrical cabinet, extraction and safety-system improvements\u003c\/li\u003e\n\u003cli\u003eCalibration, parameter setup and test cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that cut acceptably but run an unsupported control or CAM version\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control platform\u003c\/li\u003e\n\u003cli\u003eShops standardizing nesting and control workflow across several cutting machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with no parameter backup or documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC platform and version\u003c\/th\u003e\n\u003ctd\u003eInstalled control, software version and license status\u003c\/td\u003e\n\u003ctd\u003eDecides whether a migration keeps your parameters or starts clean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive package\u003c\/th\u003e\n\u003ctd\u003eMotor and drive brand, model, feedback type and tuning data\u003c\/td\u003e\n\u003ctd\u003eMixed-generation drives are the usual reason a retrofit stalls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O and cabinet layout\u003c\/th\u003e\n\u003ctd\u003eExisting wiring, terminal layout and cabinet space\u003c\/td\u003e\n\u003ctd\u003eCabinet space and wiring quality set the labor hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and light curtains\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — this is not optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical condition\u003c\/th\u003e\n\u003ctd\u003eRack, pinion, guides, bearings and gantry squareness\u003c\/td\u003e\n\u003ctd\u003eA new control cannot correct worn motion hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eThe assemblies below are specified while the fiber laser cutting machine is configured; the shortlist shows the options available for each.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eBodor\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube CNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess TubePro \/ Au3tech tube suite\u003c\/td\u003e\n\u003ctd\u003eMatched to tube package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo motor and drive options\u003c\/th\u003e\n\u003ctd\u003eYaskawa \/ Delta \/ Fuji \/ Panasonic\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNesting and CAM software options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST \/ Lantek \/ Radan \/ Metalix\u003c\/td\u003e\n\u003ctd\u003eQuote-selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eIdentify the unit before anything else — the following is what the assessment works from:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent CNC brand, version and a photo of the control screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backup you hold\u003c\/li\u003e\n\u003cli\u003eA description of what the machine does now and what you need it to do\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eParameter and license recovery depends on what backups exist before work starts\u003c\/li\u003e\n\u003cli\u003eWorn racks, guides and bearings must be corrected mechanically first\u003c\/li\u003e\n\u003cli\u003eSome legacy platforms have no supported migration path and are quoted as a replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eDowntime is quoted apart from parts lead time so the shutdown can be planned around your production rather than around procurement. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eComplete the intake with those details and the quotation is issued against your parts and your site. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482558321006,"sku":"UM-BRAND-BOD-012","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/bodor-fiber-laser-retrofit-upgrade-white-v1_6d365389-c101-416f-986a-ace046883dda.png?v=1786025952"},{"product_id":"hsg-fiber-laser-retrofit-upgrade-service","title":"HSG Fiber Laser Retrofit \u0026 Upgrade Service","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the HSG control and motion package on a fiber laser cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCNC controller and cutting-software modernization\u003c\/li\u003e\n\u003cli\u003eFiber laser source, cutting head and chiller replacement\u003c\/li\u003e\n\u003cli\u003eServo drive, height control and gas-system upgrades\u003c\/li\u003e\n\u003cli\u003eElectrical cabinet, extraction and safety-system improvements\u003c\/li\u003e\n\u003cli\u003eCalibration, parameter setup and test cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that cut acceptably but run an unsupported control or CAM version\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control platform\u003c\/li\u003e\n\u003cli\u003eShops standardizing nesting and control workflow across several cutting machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with no parameter backup or documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC platform and version\u003c\/th\u003e\n\u003ctd\u003eInstalled control, software version and license status\u003c\/td\u003e\n\u003ctd\u003eDecides whether a migration keeps your parameters or starts clean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive package\u003c\/th\u003e\n\u003ctd\u003eMotor and drive brand, model, feedback type and tuning data\u003c\/td\u003e\n\u003ctd\u003eMixed-generation drives are the usual reason a retrofit stalls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O and cabinet layout\u003c\/th\u003e\n\u003ctd\u003eExisting wiring, terminal layout and cabinet space\u003c\/td\u003e\n\u003ctd\u003eCabinet space and wiring quality set the labor hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and light curtains\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — this is not optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical condition\u003c\/th\u003e\n\u003ctd\u003eRack, pinion, guides, bearings and gantry squareness\u003c\/td\u003e\n\u003ctd\u003eA new control cannot correct worn motion hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eEach major assembly on a fiber laser cutting machine is selected at configuration. The shortlist below is what the build is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eHSG\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube CNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess TubePro \/ Au3tech tube suite\u003c\/td\u003e\n\u003ctd\u003eMatched to tube package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo motor and drive options\u003c\/th\u003e\n\u003ctd\u003eYaskawa \/ Delta \/ Fuji \/ Panasonic\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNesting and CAM software options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST \/ Lantek \/ Radan \/ Metalix\u003c\/td\u003e\n\u003ctd\u003eQuote-selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe scope is written from these, not from the machine name:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent CNC brand, version and a photo of the control screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backup you hold\u003c\/li\u003e\n\u003cli\u003eA description of what the machine does now and what you need it to do\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eParameter and license recovery depends on what backups exist before work starts\u003c\/li\u003e\n\u003cli\u003eWorn racks, guides and bearings must be corrected mechanically first\u003c\/li\u003e\n\u003cli\u003eSome legacy platforms have no supported migration path and are quoted as a replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eThe quotation separates parts lead time from the shutdown window, and the machine stays in production until the parts have arrived. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eWith those details the response is a written quotation rather than a price range. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482566283630,"sku":"UM-BRAND-HSG-011","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/hsg-fiber-laser-retrofit-upgrade-white-v1_9c3bc123-c8a6-41dc-a2e0-762d3f94369e.png?v=1786025954"},{"product_id":"mitsubishi-laser-cutting-machine-retrofit-control-upgrade","title":"Mitsubishi Laser Cutting Machine Retrofit \u0026 Control Upgrade","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the Mitsubishi machine control and mechanical package on a CNC machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCNC control, HMI, PLC and electrical-system modernization\u003c\/li\u003e\n\u003cli\u003eServo drive, encoder and motion-system evaluation\u003c\/li\u003e\n\u003cli\u003eLaser source, cutting head, chiller and gas-system review\u003c\/li\u003e\n\u003cli\u003eExtraction, safety and obsolete-parts assessment\u003c\/li\u003e\n\u003cli\u003eCalibration, test cutting and recommissioning support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that are mechanically sound but limited by obsolete electronics\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on equipment with service life left\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment bringing a machine to a supportable standard\u003c\/li\u003e\n\u003cli\u003ePlants standardizing controls, drives or safety systems across several machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine identity and condition\u003c\/th\u003e\n\u003ctd\u003eMake, model, year, hours and service history\u003c\/td\u003e\n\u003ctd\u003eSets whether the machine is worth the investment at all\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl and electrical\u003c\/th\u003e\n\u003ctd\u003eControl platform, cabinet condition and documentation\u003c\/td\u003e\n\u003ctd\u003eDocumentation availability changes the labor estimate significantly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical wear\u003c\/th\u003e\n\u003ctd\u003eWays, screws, bearings, guides and squareness\u003c\/td\u003e\n\u003ctd\u003eA retrofit cannot correct worn mechanics — they get quoted first\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParts availability\u003c\/th\u003e\n\u003ctd\u003eWhich components still have a supply route\u003c\/td\u003e\n\u003ctd\u003eThis is what decides retrofit versus replace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety and compliance\u003c\/th\u003e\n\u003ctd\u003eGuarding, interlocks and stop performance\u003c\/td\u003e\n\u003ctd\u003eAny control change re-opens the guarding assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eA cnc machine is specified per assembly rather than from one fixed part number. The options below are the shortlist this configuration is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eMitsubishi\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive options\u003c\/th\u003e\n\u003ctd\u003eEstun \/ Yaskawa \/ Delta \/ Siemens\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHydraulic valve options\u003c\/th\u003e\n\u003ctd\u003eBosch Rexroth \/ Parker \/ HOERBIGER \/ HAWE \/ Yuken\u003c\/td\u003e\n\u003ctd\u003eCircuit-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety light curtain and interlock options\u003c\/th\u003e\n\u003ctd\u003eSICK \/ Pilz \/ Keyence \/ Banner\u003c\/td\u003e\n\u003ctd\u003eGuarding scope by risk assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe assessment starts from your data, not from a model number:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003ePhotos of the machine, the control screen and the cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any backups you hold\u003c\/li\u003e\n\u003cli\u003eService history and known faults\u003c\/li\u003e\n\u003cli\u003eWhat you need the machine to do after the work\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRetrofit economics turn negative fast on a machine with worn mechanics\u003c\/li\u003e\n\u003cli\u003eObsolete components may have no supply route at any price\u003c\/li\u003e\n\u003cli\u003ePost-retrofit safety validation is the owner's responsibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eParts availability drives the schedule. The shutdown window is agreed separately and only after the components are confirmed in stock. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSend those details through the intake form and the written quotation follows against your application. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482567004526,"sku":"UM-BRAND-MIT-010","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/mitsubishi-laser-retrofit-control-upgrade-white-v1_ff5aa3d6-ddfb-45ae-8a6a-a95f7b2b14b6.png?v=1786025957"},{"product_id":"mazak-laser-cutting-machine-upgrade-assessment","title":"Mazak Laser Cutting Machine Upgrade Assessment","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the Mazak control and motion package on a fiber laser cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCNC control, PLC, servo and electrical-system review\u003c\/li\u003e\n\u003cli\u003eLaser source, cutting head, cooling and assist-gas evaluation\u003c\/li\u003e\n\u003cli\u003eMotion accuracy and obsolete-component analysis\u003c\/li\u003e\n\u003cli\u003eExtraction, safety and software-interface observations\u003c\/li\u003e\n\u003cli\u003eRecommended repair and upgrade roadmap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that cut acceptably but run an unsupported control or CAM version\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control platform\u003c\/li\u003e\n\u003cli\u003eShops standardizing nesting and control workflow across several cutting machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with no parameter backup or documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC platform and version\u003c\/th\u003e\n\u003ctd\u003eInstalled control, software version and license status\u003c\/td\u003e\n\u003ctd\u003eDecides whether a migration keeps your parameters or starts clean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive package\u003c\/th\u003e\n\u003ctd\u003eMotor and drive brand, model, feedback type and tuning data\u003c\/td\u003e\n\u003ctd\u003eMixed-generation drives are the usual reason a retrofit stalls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O and cabinet layout\u003c\/th\u003e\n\u003ctd\u003eExisting wiring, terminal layout and cabinet space\u003c\/td\u003e\n\u003ctd\u003eCabinet space and wiring quality set the labor hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and light curtains\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — this is not optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical condition\u003c\/th\u003e\n\u003ctd\u003eRack, pinion, guides, bearings and gantry squareness\u003c\/td\u003e\n\u003ctd\u003eA new control cannot correct worn motion hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eA fiber laser cutting machine is specified per assembly rather than from one fixed part number. The options below are the shortlist this configuration is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eMazak\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube CNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess TubePro \/ Au3tech tube suite\u003c\/td\u003e\n\u003ctd\u003eMatched to tube package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo motor and drive options\u003c\/th\u003e\n\u003ctd\u003eYaskawa \/ Delta \/ Fuji \/ Panasonic\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNesting and CAM software options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST \/ Lantek \/ Radan \/ Metalix\u003c\/td\u003e\n\u003ctd\u003eQuote-selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe assessment starts from your data, not from a model number:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent CNC brand, version and a photo of the control screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backup you hold\u003c\/li\u003e\n\u003cli\u003eA description of what the machine does now and what you need it to do\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eParameter and license recovery depends on what backups exist before work starts\u003c\/li\u003e\n\u003cli\u003eWorn racks, guides and bearings must be corrected mechanically first\u003c\/li\u003e\n\u003cli\u003eSome legacy platforms have no supported migration path and are quoted as a replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eParts lead time and the production shutdown window are quoted as separate lines, and the machine is taken out of production only once parts are on hand. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSend the details above and the response is a written quotation covering the equipment, freight, unloading and startup scope. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482568053102,"sku":"UM-BRAND-MAZ-009","price":750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/mazak-laser-cutting-machine-upgrade-assessment-white-v1_1d98d0d8-8027-4ca3-9943-8a701339ae12.png?v=1786025959"},{"product_id":"bystronic-laser-cutting-machine-retrofit-upgrade","title":"Bystronic Laser Cutting Machine Retrofit \u0026 Upgrade","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent retrofit and upgrade work on the Bystronic control and motion package of a fiber laser cutting machine in U.S. shops.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCNC control, HMI and electrical-system modernization\u003c\/li\u003e\n\u003cli\u003eServo drive, motion and positioning-system evaluation\u003c\/li\u003e\n\u003cli\u003eLaser source, cutting head, chiller and gas-system review\u003c\/li\u003e\n\u003cli\u003eExtraction, safety and software compatibility assessment\u003c\/li\u003e\n\u003cli\u003eCalibration, test cutting and recommissioning support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that cut acceptably but run an unsupported control or CAM version\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control platform\u003c\/li\u003e\n\u003cli\u003eShops standardizing nesting and control workflow across several cutting machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with no parameter backup or documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC platform and version\u003c\/th\u003e\n\u003ctd\u003eInstalled control, software version and license status\u003c\/td\u003e\n\u003ctd\u003eDecides whether a migration keeps your parameters or starts clean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive package\u003c\/th\u003e\n\u003ctd\u003eMotor and drive brand, model, feedback type and tuning data\u003c\/td\u003e\n\u003ctd\u003eMixed-generation drives are the usual reason a retrofit stalls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O and cabinet layout\u003c\/th\u003e\n\u003ctd\u003eExisting wiring, terminal layout and cabinet space\u003c\/td\u003e\n\u003ctd\u003eCabinet space and wiring quality set the labor hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and light curtains\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — this is not optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical condition\u003c\/th\u003e\n\u003ctd\u003eRack, pinion, guides, bearings and gantry squareness\u003c\/td\u003e\n\u003ctd\u003eA new control cannot correct worn motion hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eThe assemblies below are specified while the fiber laser cutting machine is configured; the shortlist shows the options available for each.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eBystronic\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube CNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess TubePro \/ Au3tech tube suite\u003c\/td\u003e\n\u003ctd\u003eMatched to tube package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo motor and drive options\u003c\/th\u003e\n\u003ctd\u003eYaskawa \/ Delta \/ Fuji \/ Panasonic\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNesting and CAM software options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST \/ Lantek \/ Radan \/ Metalix\u003c\/td\u003e\n\u003ctd\u003eQuote-selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eIdentify the unit before anything else — the following is what the assessment works from:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent CNC brand, version and a photo of the control screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backup you hold\u003c\/li\u003e\n\u003cli\u003eA description of what the machine does now and what you need it to do\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eParameter and license recovery depends on what backups exist before work starts\u003c\/li\u003e\n\u003cli\u003eWorn racks, guides and bearings must be corrected mechanically first\u003c\/li\u003e\n\u003cli\u003eSome legacy platforms have no supported migration path and are quoted as a replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eTwo figures are quoted: how long the parts take, and how long the machine is out of production. The shutdown is booked once parts are on hand. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSubmit the intake form with those details and the quotation is prepared against your application rather than a generic specification. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482568839534,"sku":"UM-BRAND-BYS-008","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/bystronic-laser-cutting-machine-retrofit-upgrade-white-v1_9c86126c-ed21-417d-8f7f-c0f68788392c.png?v=1786025961"},{"product_id":"trumpf-laser-cutting-machine-retrofit-upgrade-assessment","title":"Trumpf Laser Cutting Machine Retrofit \u0026 Upgrade Assessment","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the Trumpf control and motion package on a fiber laser cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCNC control, servo, PLC and electrical-system review\u003c\/li\u003e\n\u003cli\u003eLaser source, cutting head, chiller and assist-gas evaluation\u003c\/li\u003e\n\u003cli\u003eObsolete-parts and third-party compatibility analysis\u003c\/li\u003e\n\u003cli\u003eMotion accuracy, extraction and safety-system observations\u003c\/li\u003e\n\u003cli\u003eRecommended repair or modernization roadmap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that cut acceptably but run an unsupported control or CAM version\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control platform\u003c\/li\u003e\n\u003cli\u003eShops standardizing nesting and control workflow across several cutting machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with no parameter backup or documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC platform and version\u003c\/th\u003e\n\u003ctd\u003eInstalled control, software version and license status\u003c\/td\u003e\n\u003ctd\u003eDecides whether a migration keeps your parameters or starts clean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive package\u003c\/th\u003e\n\u003ctd\u003eMotor and drive brand, model, feedback type and tuning data\u003c\/td\u003e\n\u003ctd\u003eMixed-generation drives are the usual reason a retrofit stalls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O and cabinet layout\u003c\/th\u003e\n\u003ctd\u003eExisting wiring, terminal layout and cabinet space\u003c\/td\u003e\n\u003ctd\u003eCabinet space and wiring quality set the labor hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and light curtains\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — this is not optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical condition\u003c\/th\u003e\n\u003ctd\u003eRack, pinion, guides, bearings and gantry squareness\u003c\/td\u003e\n\u003ctd\u003eA new control cannot correct worn motion hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eA fiber laser cutting machine is specified per assembly rather than from one fixed part number. The options below are the shortlist this configuration is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eTrumpf\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube CNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess TubePro \/ Au3tech tube suite\u003c\/td\u003e\n\u003ctd\u003eMatched to tube package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo motor and drive options\u003c\/th\u003e\n\u003ctd\u003eYaskawa \/ Delta \/ Fuji \/ Panasonic\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNesting and CAM software options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST \/ Lantek \/ Radan \/ Metalix\u003c\/td\u003e\n\u003ctd\u003eQuote-selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe assessment starts from your data, not from a model number:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent CNC brand, version and a photo of the control screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backup you hold\u003c\/li\u003e\n\u003cli\u003eA description of what the machine does now and what you need it to do\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eParameter and license recovery depends on what backups exist before work starts\u003c\/li\u003e\n\u003cli\u003eWorn racks, guides and bearings must be corrected mechanically first\u003c\/li\u003e\n\u003cli\u003eSome legacy platforms have no supported migration path and are quoted as a replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eParts lead time and the production shutdown window are quoted as separate lines, and the machine is taken out of production only once parts are on hand. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSend the details above and the response is a written quotation covering the equipment, freight, unloading and startup scope. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482569757038,"sku":"UM-BRAND-TRU-007","price":750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/trumpf-laser-retrofit-upgrade-assessment-white-v1_f93d776c-7bee-4f72-9645-edb1786464e8.png?v=1786025964"},{"product_id":"amada-press-brake-laser-machine-retrofit-assessment","title":"Amada Press Brake \u0026 Laser Machine Retrofit Assessment","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eAmada Press Brake \u0026amp; Laser Machine Retrofit Assessment — independent retrofit and upgrade work carried out on the Amada machine control and mechanical package of a CNC machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCNC control, servo, PLC and electrical-system review\u003c\/li\u003e\n\u003cli\u003eBackgauge, ram-position, laser source, cutting head or chiller evaluation\u003c\/li\u003e\n\u003cli\u003eObsolete-parts and compatibility analysis\u003c\/li\u003e\n\u003cli\u003eSafety, utility and site-readiness observations\u003c\/li\u003e\n\u003cli\u003eRecommended repair or modernization roadmap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that are mechanically sound but limited by obsolete electronics\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on equipment with service life left\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment bringing a machine to a supportable standard\u003c\/li\u003e\n\u003cli\u003ePlants standardizing controls, drives or safety systems across several machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine identity and condition\u003c\/th\u003e\n\u003ctd\u003eMake, model, year, hours and service history\u003c\/td\u003e\n\u003ctd\u003eSets whether the machine is worth the investment at all\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl and electrical\u003c\/th\u003e\n\u003ctd\u003eControl platform, cabinet condition and documentation\u003c\/td\u003e\n\u003ctd\u003eDocumentation availability changes the labor estimate significantly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical wear\u003c\/th\u003e\n\u003ctd\u003eWays, screws, bearings, guides and squareness\u003c\/td\u003e\n\u003ctd\u003eA retrofit cannot correct worn mechanics — they get quoted first\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParts availability\u003c\/th\u003e\n\u003ctd\u003eWhich components still have a supply route\u003c\/td\u003e\n\u003ctd\u003eThis is what decides retrofit versus replace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety and compliance\u003c\/th\u003e\n\u003ctd\u003eGuarding, interlocks and stop performance\u003c\/td\u003e\n\u003ctd\u003eAny control change re-opens the guarding assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eThe assemblies below are specified while the cnc machine is configured; the shortlist shows the options available for each.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC control\u003c\/th\u003e\n\u003ctd\u003eAmada\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed control before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFeedback devices\u003c\/th\u003e\n\u003ctd\u003eHeidenhain \/ Givi Misure \/ Magnescale linear scales\u003c\/td\u003e\n\u003ctd\u003eMatched to axis count and travel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrives and motors\u003c\/th\u003e\n\u003ctd\u003eEstun \/ Yaskawa \/ Delta \/ Siemens\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety interface\u003c\/th\u003e\n\u003ctd\u003eLazer Safe \/ DSP Fiessler \/ SICK \/ Pilz\u003c\/td\u003e\n\u003ctd\u003eScope set by risk assessment and measured stop time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical integration\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eNothing is quoted before the affected assembly is identified. Send the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003ePhotos of the machine, the control screen and the cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any backups you hold\u003c\/li\u003e\n\u003cli\u003eService history and known faults\u003c\/li\u003e\n\u003cli\u003eWhat you need the machine to do after the work\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRetrofit economics turn negative fast on a machine with worn mechanics\u003c\/li\u003e\n\u003cli\u003eObsolete components may have no supply route at any price\u003c\/li\u003e\n\u003cli\u003ePost-retrofit safety validation is the owner's responsibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eTwo figures are quoted: how long the parts take, and how long the machine is out of production. The shutdown is booked once parts are on hand. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSubmit the intake form with those details and the quotation is prepared against your application rather than a generic specification. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482570183022,"sku":"UM-BRAND-AMA-006","price":750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/amada-press-brake-laser-retrofit-assessment-white-v1_5a1e05f9-95fa-4c5f-93db-e2f153bd1fbd.png?v=1786025967"},{"product_id":"durma-press-brake-control-backgauge-retrofit","title":"Durma Press Brake Control \u0026 Backgauge Retrofit","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the Durma CNC control and backgauge package on a press brake.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCNC control and operator-interface modernization\u003c\/li\u003e\n\u003cli\u003eBackgauge, servo drive and axis-feedback upgrades\u003c\/li\u003e\n\u003cli\u003ePLC, electrical cabinet and wiring retrofit\u003c\/li\u003e\n\u003cli\u003eCrowning, ram synchronization and safety-system integration\u003c\/li\u003e\n\u003cli\u003eCalibration, test bending and startup support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePress brakes that are mechanically sound but limited by an obsolete control\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control or backgauge\u003c\/li\u003e\n\u003cli\u003eShops adding axes, crowning or bend-angle feedback to an existing machine\u003c\/li\u003e\n\u003cli\u003ePlants standardizing brake controls and safety systems across several machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExisting control\u003c\/th\u003e\n\u003ctd\u003eControl brand, model, software version and axis count\u003c\/td\u003e\n\u003ctd\u003eDecides migration path and how much of the cabinet is reused\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAxis configuration\u003c\/th\u003e\n\u003ctd\u003eY1\/Y2, X, R, Z1\/Z2, crowning and any auxiliary axes\u003c\/td\u003e\n\u003ctd\u003eAxis count is a primary cost driver on a brake retrofit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eValve and hydraulic package\u003c\/th\u003e\n\u003ctd\u003eProportional valve brand, model and condition\u003c\/td\u003e\n\u003ctd\u003eA new control on a tired valve produces fast, repeatable but inaccurate bends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition feedback\u003c\/th\u003e\n\u003ctd\u003eLinear scale brand, resolution and mounting condition\u003c\/td\u003e\n\u003ctd\u003eBend-angle repeatability is a feedback problem before it is a control problem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety system\u003c\/th\u003e\n\u003ctd\u003eLight curtain or laser guard, brand, model and validity\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — budget for it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine condition\u003c\/th\u003e\n\u003ctd\u003eRam wear, frame deflection, cylinder condition and oil state\u003c\/td\u003e\n\u003ctd\u003eMechanical condition sets the accuracy ceiling the new control can reach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eA press brake is specified per assembly rather than from one fixed part number. The options below are the shortlist this configuration is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC control\u003c\/th\u003e\n\u003ctd\u003eDurma\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed control before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFeedback devices\u003c\/th\u003e\n\u003ctd\u003eHeidenhain \/ Givi Misure \/ Magnescale linear scales\u003c\/td\u003e\n\u003ctd\u003eMatched to axis count and travel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrives and motors\u003c\/th\u003e\n\u003ctd\u003eEstun \/ Yaskawa \/ Delta \/ Siemens\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety interface\u003c\/th\u003e\n\u003ctd\u003eLazer Safe \/ DSP Fiessler \/ SICK \/ Pilz\u003c\/td\u003e\n\u003ctd\u003eScope set by risk assessment and measured stop time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical integration\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe assessment starts from your data, not from a model number:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePress brake make, model, year, tonnage and bend length\u003c\/li\u003e\n\u003cli\u003eCurrent CNC control brand and model, with a photo of the screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open, and of the backgauge\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backups you hold\u003c\/li\u003e\n\u003cli\u003eAxis count you have now and axis count you want\u003c\/li\u003e\n\u003cli\u003eCurrent safety device brand and model\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA control retrofit cannot correct a worn ram, a deflecting frame or leaking cylinders\u003c\/li\u003e\n\u003cli\u003eAdding axes may require mechanical backgauge work that is quoted separately\u003c\/li\u003e\n\u003cli\u003eThe guarding assessment after a control change is the machine owner's responsibility under OSHA — plan for it in the budget\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eParts availability drives the schedule. The shutdown window is agreed separately and only after the components are confirmed in stock. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSend those details through the intake form and the written quotation follows against your application. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482571002222,"sku":"UM-BRAND-DUR-005","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/durma-press-brake-control-backgauge-retrofit-white-v1_c17c886c-0b0d-4d02-9c3e-2bfc199c1932.png?v=1786025968"},{"product_id":"lvd-press-brake-cnc-control-upgrade","title":"LVD Press Brake CNC Control Upgrade","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eLVD Press Brake CNC Control Upgrade — independent retrofit and upgrade work carried out on the LVD CNC control and backgauge package of a press brake.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCNC control and HMI replacement\u003c\/li\u003e\n\u003cli\u003eBackgauge, servo drive and axis-feedback upgrades\u003c\/li\u003e\n\u003cli\u003ePLC, electrical cabinet and communication modernization\u003c\/li\u003e\n\u003cli\u003eCrowning and ram-position integration\u003c\/li\u003e\n\u003cli\u003eCalibration, test bending and operator startup support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePress brakes that are mechanically sound but limited by an obsolete control\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control or backgauge\u003c\/li\u003e\n\u003cli\u003eShops adding axes, crowning or bend-angle feedback to an existing machine\u003c\/li\u003e\n\u003cli\u003ePlants standardizing brake controls and safety systems across several machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExisting control\u003c\/th\u003e\n\u003ctd\u003eControl brand, model, software version and axis count\u003c\/td\u003e\n\u003ctd\u003eDecides migration path and how much of the cabinet is reused\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAxis configuration\u003c\/th\u003e\n\u003ctd\u003eY1\/Y2, X, R, Z1\/Z2, crowning and any auxiliary axes\u003c\/td\u003e\n\u003ctd\u003eAxis count is a primary cost driver on a brake retrofit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eValve and hydraulic package\u003c\/th\u003e\n\u003ctd\u003eProportional valve brand, model and condition\u003c\/td\u003e\n\u003ctd\u003eA new control on a tired valve produces fast, repeatable but inaccurate bends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition feedback\u003c\/th\u003e\n\u003ctd\u003eLinear scale brand, resolution and mounting condition\u003c\/td\u003e\n\u003ctd\u003eBend-angle repeatability is a feedback problem before it is a control problem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety system\u003c\/th\u003e\n\u003ctd\u003eLight curtain or laser guard, brand, model and validity\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — budget for it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine condition\u003c\/th\u003e\n\u003ctd\u003eRam wear, frame deflection, cylinder condition and oil state\u003c\/td\u003e\n\u003ctd\u003eMechanical condition sets the accuracy ceiling the new control can reach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eA press brake is specified per assembly rather than from one fixed part number. The options below are the shortlist this configuration is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC control\u003c\/th\u003e\n\u003ctd\u003eLVD\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed control before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFeedback devices\u003c\/th\u003e\n\u003ctd\u003eHeidenhain \/ Givi Misure \/ Magnescale linear scales\u003c\/td\u003e\n\u003ctd\u003eMatched to axis count and travel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrives and motors\u003c\/th\u003e\n\u003ctd\u003eEstun \/ Yaskawa \/ Delta \/ Siemens\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety interface\u003c\/th\u003e\n\u003ctd\u003eLazer Safe \/ DSP Fiessler \/ SICK \/ Pilz\u003c\/td\u003e\n\u003ctd\u003eScope set by risk assessment and measured stop time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical integration\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eSend this set and the first-round questions are already answered:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePress brake make, model, year, tonnage and bend length\u003c\/li\u003e\n\u003cli\u003eCurrent CNC control brand and model, with a photo of the screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open, and of the backgauge\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backups you hold\u003c\/li\u003e\n\u003cli\u003eAxis count you have now and axis count you want\u003c\/li\u003e\n\u003cli\u003eCurrent safety device brand and model\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA control retrofit cannot correct a worn ram, a deflecting frame or leaking cylinders\u003c\/li\u003e\n\u003cli\u003eAdding axes may require mechanical backgauge work that is quoted separately\u003c\/li\u003e\n\u003cli\u003eThe guarding assessment after a control change is the machine owner's responsibility under OSHA — plan for it in the budget\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eParts lead time and the production shutdown window are quoted as separate lines, and the machine is taken out of production only once parts are on hand. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSend the details above and the response is a written quotation covering the equipment, freight, unloading and startup scope. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482571100526,"sku":"UM-BRAND-LVD-004","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/lvd-press-brake-cnc-control-upgrade-white-v1_257eab72-4d29-439f-8b67-cb0188c85c12.png?v=1786025970"},{"product_id":"wysong-press-brake-control-backgauge-upgrade","title":"Wysong Press Brake Control \u0026 Backgauge Upgrade","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent retrofit and upgrade work on the Wysong CNC control and backgauge package of a press brake in U.S. shops.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCNC or digital control replacement\u003c\/li\u003e\n\u003cli\u003eBackgauge and servo positioning upgrade\u003c\/li\u003e\n\u003cli\u003eEncoder, scale and limit-switch replacement\u003c\/li\u003e\n\u003cli\u003eElectrical panel and safety-circuit modernization\u003c\/li\u003e\n\u003cli\u003eCalibration, test bending and operator startup support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePress brakes that are mechanically sound but limited by an obsolete control\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control or backgauge\u003c\/li\u003e\n\u003cli\u003eShops adding axes, crowning or bend-angle feedback to an existing machine\u003c\/li\u003e\n\u003cli\u003ePlants standardizing brake controls and safety systems across several machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExisting control\u003c\/th\u003e\n\u003ctd\u003eControl brand, model, software version and axis count\u003c\/td\u003e\n\u003ctd\u003eDecides migration path and how much of the cabinet is reused\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAxis configuration\u003c\/th\u003e\n\u003ctd\u003eY1\/Y2, X, R, Z1\/Z2, crowning and any auxiliary axes\u003c\/td\u003e\n\u003ctd\u003eAxis count is a primary cost driver on a brake retrofit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eValve and hydraulic package\u003c\/th\u003e\n\u003ctd\u003eProportional valve brand, model and condition\u003c\/td\u003e\n\u003ctd\u003eA new control on a tired valve produces fast, repeatable but inaccurate bends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition feedback\u003c\/th\u003e\n\u003ctd\u003eLinear scale brand, resolution and mounting condition\u003c\/td\u003e\n\u003ctd\u003eBend-angle repeatability is a feedback problem before it is a control problem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety system\u003c\/th\u003e\n\u003ctd\u003eLight curtain or laser guard, brand, model and validity\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — budget for it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine condition\u003c\/th\u003e\n\u003ctd\u003eRam wear, frame deflection, cylinder condition and oil state\u003c\/td\u003e\n\u003ctd\u003eMechanical condition sets the accuracy ceiling the new control can reach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eEach major assembly on a press brake is selected at configuration. The shortlist below is what the build is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC control\u003c\/th\u003e\n\u003ctd\u003eWysong\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed control before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFeedback devices\u003c\/th\u003e\n\u003ctd\u003eHeidenhain \/ Givi Misure \/ Magnescale linear scales\u003c\/td\u003e\n\u003ctd\u003eMatched to axis count and travel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrives and motors\u003c\/th\u003e\n\u003ctd\u003eEstun \/ Yaskawa \/ Delta \/ Siemens\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety interface\u003c\/th\u003e\n\u003ctd\u003eLazer Safe \/ DSP Fiessler \/ SICK \/ Pilz\u003c\/td\u003e\n\u003ctd\u003eScope set by risk assessment and measured stop time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical integration\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eIdentify the unit before anything else — the following is what the assessment works from:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePress brake make, model, year, tonnage and bend length\u003c\/li\u003e\n\u003cli\u003eCurrent CNC control brand and model, with a photo of the screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open, and of the backgauge\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backups you hold\u003c\/li\u003e\n\u003cli\u003eAxis count you have now and axis count you want\u003c\/li\u003e\n\u003cli\u003eCurrent safety device brand and model\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA control retrofit cannot correct a worn ram, a deflecting frame or leaking cylinders\u003c\/li\u003e\n\u003cli\u003eAdding axes may require mechanical backgauge work that is quoted separately\u003c\/li\u003e\n\u003cli\u003eThe guarding assessment after a control change is the machine owner's responsibility under OSHA — plan for it in the budget\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eThe schedule follows parts, not the order date: lead time and shutdown window appear as two separate lines on the quotation. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eWith that information the quotation covers configuration, freight and installation scope in one written response. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482572149102,"sku":"UM-BRAND-WYS-003","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/wysong-press-brake-control-backgauge-upgrade-white-v1_972ffa7f-4343-424e-b886-8a4ea0fa2a25.png?v=1786025973"},{"product_id":"cincinnati-press-brake-cnc-control-backgauge-retrofit","title":"Cincinnati Press Brake CNC Control \u0026 Backgauge Retrofit","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the Cincinnati CNC control and backgauge package on a press brake.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCNC control and operator-interface replacement\u003c\/li\u003e\n\u003cli\u003eBackgauge, servo motor and drive retrofit\u003c\/li\u003e\n\u003cli\u003eLinear scale, encoder and ram-position feedback upgrade\u003c\/li\u003e\n\u003cli\u003eElectrical cabinet, PLC and safety-circuit modernization\u003c\/li\u003e\n\u003cli\u003eMachine calibration and test bending\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePress brakes that are mechanically sound but limited by an obsolete control\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control or backgauge\u003c\/li\u003e\n\u003cli\u003eShops adding axes, crowning or bend-angle feedback to an existing machine\u003c\/li\u003e\n\u003cli\u003ePlants standardizing brake controls and safety systems across several machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExisting control\u003c\/th\u003e\n\u003ctd\u003eControl brand, model, software version and axis count\u003c\/td\u003e\n\u003ctd\u003eDecides migration path and how much of the cabinet is reused\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAxis configuration\u003c\/th\u003e\n\u003ctd\u003eY1\/Y2, X, R, Z1\/Z2, crowning and any auxiliary axes\u003c\/td\u003e\n\u003ctd\u003eAxis count is a primary cost driver on a brake retrofit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eValve and hydraulic package\u003c\/th\u003e\n\u003ctd\u003eProportional valve brand, model and condition\u003c\/td\u003e\n\u003ctd\u003eA new control on a tired valve produces fast, repeatable but inaccurate bends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition feedback\u003c\/th\u003e\n\u003ctd\u003eLinear scale brand, resolution and mounting condition\u003c\/td\u003e\n\u003ctd\u003eBend-angle repeatability is a feedback problem before it is a control problem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety system\u003c\/th\u003e\n\u003ctd\u003eLight curtain or laser guard, brand, model and validity\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — budget for it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine condition\u003c\/th\u003e\n\u003ctd\u003eRam wear, frame deflection, cylinder condition and oil state\u003c\/td\u003e\n\u003ctd\u003eMechanical condition sets the accuracy ceiling the new control can reach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eComponent selection on a press brake is part of the configuration, not a fixed bill of materials. These are the assemblies and the options each is chosen from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC control\u003c\/th\u003e\n\u003ctd\u003eCincinnati\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed control before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFeedback devices\u003c\/th\u003e\n\u003ctd\u003eHeidenhain \/ Givi Misure \/ Magnescale linear scales\u003c\/td\u003e\n\u003ctd\u003eMatched to axis count and travel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrives and motors\u003c\/th\u003e\n\u003ctd\u003eEstun \/ Yaskawa \/ Delta \/ Siemens\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety interface\u003c\/th\u003e\n\u003ctd\u003eLazer Safe \/ DSP Fiessler \/ SICK \/ Pilz\u003c\/td\u003e\n\u003ctd\u003eScope set by risk assessment and measured stop time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical integration\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe assessment starts from your data, not from a model number:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePress brake make, model, year, tonnage and bend length\u003c\/li\u003e\n\u003cli\u003eCurrent CNC control brand and model, with a photo of the screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open, and of the backgauge\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backups you hold\u003c\/li\u003e\n\u003cli\u003eAxis count you have now and axis count you want\u003c\/li\u003e\n\u003cli\u003eCurrent safety device brand and model\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA control retrofit cannot correct a worn ram, a deflecting frame or leaking cylinders\u003c\/li\u003e\n\u003cli\u003eAdding axes may require mechanical backgauge work that is quoted separately\u003c\/li\u003e\n\u003cli\u003eThe guarding assessment after a control change is the machine owner's responsibility under OSHA — plan for it in the budget\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eComponent lead time is confirmed in writing before the machine is released from production, and the shutdown is scheduled against it. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eProvide those details and the response states configuration, freight, unloading and startup scope in writing. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482572542318,"sku":"UM-BRAND-CIN-002","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/cincinnati-press-brake-cnc-control-backgauge-retrofit-white-v1_71e11aba-34d8-4cf1-8ef6-0e9d5dbe5af3.png?v=1786025974"},{"product_id":"accurpress-press-brake-retrofit-control-upgrade","title":"Accurpress Press Brake Retrofit \u0026 Control Upgrade","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eAccurpress Press Brake Retrofit \u0026amp; Control Upgrade — independent retrofit and upgrade work carried out on the Accurpress machine control and mechanical package of a CNC machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCNC control replacement or modernization\u003c\/li\u003e\n\u003cli\u003eBackgauge, servo drive and position-feedback upgrades\u003c\/li\u003e\n\u003cli\u003eElectrical cabinet, PLC and wiring retrofit\u003c\/li\u003e\n\u003cli\u003eHydraulic, crowning and accuracy evaluation\u003c\/li\u003e\n\u003cli\u003eCalibration, test bending and startup support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that are mechanically sound but limited by obsolete electronics\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on equipment with service life left\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment bringing a machine to a supportable standard\u003c\/li\u003e\n\u003cli\u003ePlants standardizing controls, drives or safety systems across several machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine identity and condition\u003c\/th\u003e\n\u003ctd\u003eMake, model, year, hours and service history\u003c\/td\u003e\n\u003ctd\u003eSets whether the machine is worth the investment at all\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl and electrical\u003c\/th\u003e\n\u003ctd\u003eControl platform, cabinet condition and documentation\u003c\/td\u003e\n\u003ctd\u003eDocumentation availability changes the labor estimate significantly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical wear\u003c\/th\u003e\n\u003ctd\u003eWays, screws, bearings, guides and squareness\u003c\/td\u003e\n\u003ctd\u003eA retrofit cannot correct worn mechanics — they get quoted first\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParts availability\u003c\/th\u003e\n\u003ctd\u003eWhich components still have a supply route\u003c\/td\u003e\n\u003ctd\u003eThis is what decides retrofit versus replace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety and compliance\u003c\/th\u003e\n\u003ctd\u003eGuarding, interlocks and stop performance\u003c\/td\u003e\n\u003ctd\u003eAny control change re-opens the guarding assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eEach major assembly on a cnc machine is selected at configuration. The shortlist below is what the build is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC control\u003c\/th\u003e\n\u003ctd\u003eAccurpress\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed control before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFeedback devices\u003c\/th\u003e\n\u003ctd\u003eHeidenhain \/ Givi Misure \/ Magnescale linear scales\u003c\/td\u003e\n\u003ctd\u003eMatched to axis count and travel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrives and motors\u003c\/th\u003e\n\u003ctd\u003eEstun \/ Yaskawa \/ Delta \/ Siemens\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety interface\u003c\/th\u003e\n\u003ctd\u003eLazer Safe \/ DSP Fiessler \/ SICK \/ Pilz\u003c\/td\u003e\n\u003ctd\u003eScope set by risk assessment and measured stop time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical integration\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eNothing is quoted before the affected assembly is identified. Send the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003ePhotos of the machine, the control screen and the cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any backups you hold\u003c\/li\u003e\n\u003cli\u003eService history and known faults\u003c\/li\u003e\n\u003cli\u003eWhat you need the machine to do after the work\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRetrofit economics turn negative fast on a machine with worn mechanics\u003c\/li\u003e\n\u003cli\u003eObsolete components may have no supply route at any price\u003c\/li\u003e\n\u003cli\u003ePost-retrofit safety validation is the owner's responsibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eThe quotation separates parts lead time from the shutdown window, and the machine stays in production until the parts have arrived. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eWith those details the response is a written quotation rather than a price range. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482573033838,"sku":"UM-BRAND-ACC-001","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/accurpress-press-brake-retrofit-control-upgrade-white-v1_6315c14a-8822-40ce-8285-d06a591fe978.png?v=1786025975"},{"product_id":"machine-retrofit-engineering-compatibility-assessment","title":"Machine Retrofit Engineering \u0026 Compatibility Assessment","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent retrofit and upgrade work on the machine control and mechanical package of a CNC machine in U.S. shops.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachine model, drawings, photos and current-condition review\u003c\/li\u003e\n\u003cli\u003eMechanical, electrical, hydraulic and control compatibility\u003c\/li\u003e\n\u003cli\u003eUtility, safety and site-readiness requirements\u003c\/li\u003e\n\u003cli\u003eRecommended components and phased upgrade options\u003c\/li\u003e\n\u003cli\u003ePreliminary project scope, exclusions and implementation risks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that are mechanically sound but limited by obsolete electronics\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on equipment with service life left\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment bringing a machine to a supportable standard\u003c\/li\u003e\n\u003cli\u003ePlants standardizing controls, drives or safety systems across several machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine identity and condition\u003c\/th\u003e\n\u003ctd\u003eMake, model, year, hours and service history\u003c\/td\u003e\n\u003ctd\u003eSets whether the machine is worth the investment at all\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl and electrical\u003c\/th\u003e\n\u003ctd\u003eControl platform, cabinet condition and documentation\u003c\/td\u003e\n\u003ctd\u003eDocumentation availability changes the labor estimate significantly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical wear\u003c\/th\u003e\n\u003ctd\u003eWays, screws, bearings, guides and squareness\u003c\/td\u003e\n\u003ctd\u003eA retrofit cannot correct worn mechanics — they get quoted first\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParts availability\u003c\/th\u003e\n\u003ctd\u003eWhich components still have a supply route\u003c\/td\u003e\n\u003ctd\u003eThis is what decides retrofit versus replace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety and compliance\u003c\/th\u003e\n\u003ctd\u003eGuarding, interlocks and stop performance\u003c\/td\u003e\n\u003ctd\u003eAny control change re-opens the guarding assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eThe assemblies below are specified while the cnc machine is configured; the shortlist shows the options available for each.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eSiemens \/ Allen-Bradley \/ Schneider Electric \/ Mitsubishi Electric\u003c\/td\u003e\n\u003ctd\u003eConfigured at build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive options\u003c\/th\u003e\n\u003ctd\u003eEstun \/ Yaskawa \/ Delta \/ Siemens\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHydraulic valve options\u003c\/th\u003e\n\u003ctd\u003eBosch Rexroth \/ Parker \/ HOERBIGER \/ HAWE \/ Yuken\u003c\/td\u003e\n\u003ctd\u003eCircuit-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety light curtain and interlock options\u003c\/th\u003e\n\u003ctd\u003eSICK \/ Pilz \/ Keyence \/ Banner\u003c\/td\u003e\n\u003ctd\u003eGuarding scope by risk assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eIdentify the unit before anything else — the following is what the assessment works from:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003ePhotos of the machine, the control screen and the cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any backups you hold\u003c\/li\u003e\n\u003cli\u003eService history and known faults\u003c\/li\u003e\n\u003cli\u003eWhat you need the machine to do after the work\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRetrofit economics turn negative fast on a machine with worn mechanics\u003c\/li\u003e\n\u003cli\u003eObsolete components may have no supply route at any price\u003c\/li\u003e\n\u003cli\u003ePost-retrofit safety validation is the owner's responsibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eTwo figures are quoted: how long the parts take, and how long the machine is out of production. The shutdown is booked once parts are on hand. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSubmit the intake form with those details and the quotation is prepared against your application rather than a generic specification. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482573918574,"sku":"UM-CNC-ENG-009","price":750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/machine-retrofit-engineering-compatibility-assessment-white-v1_7da9f19c-2f13-4211-bc64-aa037e95902f.png?v=1786025977"},{"product_id":"custom-cnc-machine-automation-integration","title":"Custom CNC Machine Automation Integration","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent retrofit and upgrade work on the machine control and mechanical package of a CNC machine in U.S. shops.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRobotic loading, unloading and part handling\u003c\/li\u003e\n\u003cli\u003eSheet, tube or blank-feeding systems\u003c\/li\u003e\n\u003cli\u003eConveyors, positioners and material staging\u003c\/li\u003e\n\u003cli\u003ePLC communication, safety zoning and production interlocks\u003c\/li\u003e\n\u003cli\u003eCycle testing, operator training and startup support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that are mechanically sound but limited by obsolete electronics\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on equipment with service life left\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment bringing a machine to a supportable standard\u003c\/li\u003e\n\u003cli\u003ePlants standardizing controls, drives or safety systems across several machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine identity and condition\u003c\/th\u003e\n\u003ctd\u003eMake, model, year, hours and service history\u003c\/td\u003e\n\u003ctd\u003eSets whether the machine is worth the investment at all\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl and electrical\u003c\/th\u003e\n\u003ctd\u003eControl platform, cabinet condition and documentation\u003c\/td\u003e\n\u003ctd\u003eDocumentation availability changes the labor estimate significantly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical wear\u003c\/th\u003e\n\u003ctd\u003eWays, screws, bearings, guides and squareness\u003c\/td\u003e\n\u003ctd\u003eA retrofit cannot correct worn mechanics — they get quoted first\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParts availability\u003c\/th\u003e\n\u003ctd\u003eWhich components still have a supply route\u003c\/td\u003e\n\u003ctd\u003eThis is what decides retrofit versus replace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety and compliance\u003c\/th\u003e\n\u003ctd\u003eGuarding, interlocks and stop performance\u003c\/td\u003e\n\u003ctd\u003eAny control change re-opens the guarding assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eComponent selection on a cnc machine is part of the configuration, not a fixed bill of materials. These are the assemblies and the options each is chosen from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eSiemens \/ Allen-Bradley \/ Schneider Electric \/ Mitsubishi Electric\u003c\/td\u003e\n\u003ctd\u003eConfigured at build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive options\u003c\/th\u003e\n\u003ctd\u003eEstun \/ Yaskawa \/ Delta \/ Siemens\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHydraulic valve options\u003c\/th\u003e\n\u003ctd\u003eBosch Rexroth \/ Parker \/ HOERBIGER \/ HAWE \/ Yuken\u003c\/td\u003e\n\u003ctd\u003eCircuit-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety light curtain and interlock options\u003c\/th\u003e\n\u003ctd\u003eSICK \/ Pilz \/ Keyence \/ Banner\u003c\/td\u003e\n\u003ctd\u003eGuarding scope by risk assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eComponent identification comes first. Photographs of the nameplate and the open control cabinet answer most first-round questions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003ePhotos of the machine, the control screen and the cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any backups you hold\u003c\/li\u003e\n\u003cli\u003eService history and known faults\u003c\/li\u003e\n\u003cli\u003eWhat you need the machine to do after the work\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRetrofit economics turn negative fast on a machine with worn mechanics\u003c\/li\u003e\n\u003cli\u003eObsolete components may have no supply route at any price\u003c\/li\u003e\n\u003cli\u003ePost-retrofit safety validation is the owner's responsibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eComponent lead time is confirmed in writing before the machine is released from production, and the shutdown is scheduled against it. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eProvide those details and the response states configuration, freight, unloading and startup scope in writing. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":54482574672238,"sku":"UM-CNC-AUTO-008","price":9900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/2968\/7918\/files\/custom-cnc-machine-automation-integration-white-v1_78a0b542-8245-40f8-a5ec-446e406471f5.png?v=1786025979"}],"url":"https:\/\/umprotech.com\/collections\/machine-retrofit-upgrade-services.oembed?page=5","provider":"UmproTech","version":"1.0","type":"link"}